All Stories

  1. Design of a Nonisolated Bidirectional Multiport DC‐DC Converter With Improved Efficiency for Photovoltaic Applications
  2. Low voltage ride through (LVRT) enhancement of a two-stage grid-connected photovoltaic system based on finite-control-set model predictive control strategy
  3. An Open Circuit Fault-Tolerant Method for Cascaded Cross-Switched Multilevel Inverter
  4. Topology and modulation improvement of a dual‐output DC‐DC converter in order to minimize the output ports dependence
  5. Optimal voltage set-point of automatic tap changer transformers and generators and reactive power compensation to increase power system predictability
  6. Optimal parameters setting for soft open point to improve power quality indices in unbalanced distribution systems considering loads and renewable energy sources uncertainty
  7. A step-by-step full-order sliding mode controller design for standalone inverter-interfaced cleaner renewable energy sources
  8. Analysis and suppression of switching‐frequency harmonics in variable‐output‐voltage inverters
  9. Optimal interaction of photovoltaic investor (PVI) in maximizing total benefits of distribution network operator (DNO)
  10. Probabilistic optimal power flow in wind energy integrated power system based on the K‐medoids data clustering method considering correlated uncertain variables
  11. Level vector pulse width modulation for multilevel inverters
  12. A Nonisolated Single-Switch Coupled Inductor-Based DC-DC Converter with High Voltage Gain for Renewable Power Generation Systems
  13. SHM‐PWM technique in a cascaded H‐bridge multilevel inverter with adjustable DC‐link for wide voltage range applications
  14. Design and Implementation of a Ground Power Unit Based on the Fault-Tolerant Inverter
  15. Stochastic scheduling of energy storage systems in harmonic polluted active distribution networks
  16. Symmetric Cascaded H-Bridge Multilevel Inverter With Enhanced Multi-Phase Fault Tolerant Capability
  17. PSO-Optimized SHE-PWM Technique in a Cascaded H-Bridge Multilevel Inverter for Variable Output Voltage Applications
  18. Cascaded H-bridge Based STATCOM With Improved Ride Through Capability of Submodule Failures
  19. A multi-objective probabilistic approach for smart voltage control in wind-energy integrated networks considering correlated parameters
  20. Higher‐order sliding mode current controller for grid‐connected distributed energy resources with LCL$\mathrm{LCL}$ filters under unknown grid voltage conditions
  21. Sliding mode control of a dynamic voltage restorer based on PWM AC chopper in three-phase three-wire systems
  22. Extended hybrid cross-switched multilevel inverter circuit topology
  23. Design and Application of a Five-Level Cross-Switched Inverter in Low-Voltage Distribution System Voltage Compensation
  24. Improved Low Voltage Ride Through by A STATCOM Based on Neutral Point Piloted (NPP) Multilevel Inverter
  25. Robust nonlinear sliding mode controllers for single-phase inverter interfaced distributed energy resources based on super twisting algorithms
  26. Reducing Harmonic Distortion in a 5-Level Cascaded H-bridge Inverter Fed by a 12-Pulse Thyristor Rectifier
  27. Selective Harmonic Elimination in a Cascaded H-Bridge Multilevel Inverter fed by High-Frequency Isolated DC-DC Converter
  28. Nested Neutral Point Clamped Converter Based DSTATCOM with Mixed-Sequence Reactive Current Compensation Capability
  29. Operation of the AC-AC Converter Based Dynamic Voltage Restorer in Weak Distribution Systems
  30. Selective Harmonic Elimination PWM for Cascaded H-bridge Multilevel Inverter with Wide Output Voltage Range Using PSO Algorithm
  31. Staircase Selective Harmonic Elimination in Multilevel Inverters to Achieve Wide Output Voltage Range
  32. Transformerless Grid-Connected Asymmetric PV Inverter with Constant CMV and Reactive Power Injection Capability
  33. A non‐isolated single‐input dual‐output boost DC–DC converter
  34. Optimal allocation of D-STATCOM in distribution networks including correlated renewable energy sources
  35. A Transformerless DSTATCOM Based on Cross-Switched Multilevel Inverter for Grid Voltage Regulation
  36. An Improved Fault Tolerant Technique Based on Zero-Sequence Voltage Injection for Symmetric Cascaded H-bridge Inverter
  37. Shunt Active Power Filter Based on Cross-Switched Multilevel Inverter
  38. A Novel Three-phase Multilevel Inverter with Reduced Number of IGBTs, Developed for Drive Application
  39. Design and simulation of a low-power low-cost high-frequency transformer-based dynamic voltage restorer for household applications
  40. Nonlinear Integral Higher-Order Sliding Mode Controller Design for Islanded Operations of T-Type Three-Phase Inverter-Interfaced Distributed Energy Resources
  41. P‐type non‐isolated boost DC‐DC converter with high voltage gain and extensibility for DC microgrid applications
  42. Design of a High Efficiency and High Voltage Gain Extendable Non-Isolated Boost DC-DC Converter
  43. A Single DC-Source Five-Level Inverter Applied in Stand-Alone Photovoltaic Systems Considering MPPT Capability
  44. Design and implementation of a new high step‐up DC‐DC converter for renewable applications
  45. Five-Level Single-DC Source Inverter with Adjustable DC-Link Voltage
  46. Multilevel Inverter Based Distribution STATCOM: Application of the Cross-Switched Multilevel Inverter
  47. An Interline Dynamic Voltage Restorer Using Neutral-Point-Clamped (NPC) Multilevel Converter
  48. DC dynamic voltage restorer (DC-DYR): A new concept for voltage regulation in DC systems
  49. Performance comparison of single-phase transformerless grid-connected PV inverters
  50. A comprehensive review of dynamic voltage restorers
  51. A Single-Phase Multilevel Inverter for Stand-Alone Hybrid PV/Battery Residential Application
  52. Efficient Approach to LVRT Capability of DFIG-Based Wind Turbines under Symmetrical and Asymmetrical Voltage Dips Using Dynamic Voltage Restorer
  53. FPGA-Based Reconfigurable PWM Generator for Power Electronic Converter Applications
  54. Comparison four topologies for three-phase dynamic voltage restorer
  55. Single-phase Multilevel Current Source Inverter with Reduced Device Count and Current Balancing Capability
  56. Cascaded multilevel converter based superconducting magnetic energy storage system for frequency control
  57. Dynamic voltage restorer based on multilevel inverter with adjustable dc‐link voltage
  58. Extended multilevel converters: an attempt to reduce the number of independent DC voltage sources in cascaded multilevel converters
  59. Cross-phase voltage sag compensator for three-phase distribution systems
  60. Asymmetrical multilevel converter topology with reduced number of components
  61. Cascaded cross‐switched multilevel inverter in symmetric and asymmetric conditions
  62. Cross‐switched multilevel inverter: an innovative topology
  63. Cascaded multilevel inverter using sub-multilevel cells
  64. A Generalized Cascaded Multilevel Inverter Using Series Connection of Submultilevel Inverters
  65. Variable DC voltage as a solution to improve output voltage quality in multilevel converters
  66. Charge balance control of a seven-level asymmetric cascade multilevel inverter
  67. Symmetric multilevel inverter with reduced components based on non-insulated dc voltage sources
  68. Symmetric and asymmetric multilevel inverter topologies with reduced switching devices
  69. Determination of the transformer turns ratio in a DVR to reduce the switches voltage rating
  70. Sensitive load voltage compensation against voltage sags/swells and harmonics in the grid voltage and limit downstream fault currents using DVR
  71. Three-phase cross-phase voltage sag compensator to compensate balanced/unbalanced voltage sags and phase outages in distribution systems
  72. Voltage quality improvement by a dynamic voltage restorer based on a direct three-phase converter with fictitious DC link
  73. A new scheme for multilevel inverter based dynamic voltage restorer
  74. Operation and control of dynamic voltage restorer using single-phase direct converter
  75. Dynamic voltage restorer using push-pull inverter
  76. Operation of AC chopper as downstream fault current limiter and overvoltage compensator
  77. Compensation of voltage disturbances in distribution systems using single-phase dynamic voltage restorer
  78. Mitigation of Voltage Disturbances Using Dynamic Voltage Restorer Based on Direct Converters
  79. Dynamic voltage restorer using direct ac/ac converter with fictitious dc link
  80. Transformerless DVR topology based on multilevel inverter with reduced number of switches
  81. A new topology for dynamic voltage restorers without dc link