All Stories

  1. Enhancing cancer cell immunocapture on orientation-controlled nanoimprinted microcone arrays in microgap channels
  2. A multiscale, vertical-flow perfusion system with integrated porous microchambers for upgrading multicellular spheroid culture
  3. Formation of 3D tissues of primary hepatocytes using fibrillized collagen microparticles as intercellular binders
  4. Process simplification and structure design of parallelized microslit isolator for physical property-based capture of tumor cells
  5. Polyanion-induced, microfluidic engineering of fragmented collagen microfibers for reconstituting extracellular environments of 3D hepatocyte culture
  6. Sacrificial Alginate-Assisted Microfluidic Engineering of Cell-Supportive Protein Microfibers for Hydrogel-Based Cell Encapsulation
  7. Laborless, Automated Microfluidic Tandem Cell Processor for Visualizing Intracellular Molecules of Mammalian Cells
  8. Enhanced Immunoadsorption on Imprinted Polymeric Microstructures with Nanoengineered Surface Topography for Lateral Flow Immunoassay Systems
  9. Hydrodynamic Microparticle Separation Mechanism Using Three-Dimensional Flow Profiles in Dual-Depth and Asymmetric Lattice-Shaped Microchannel Networks
  10. PDMS microstencil plate-supported fabrication of ultra-thin, condensed ECM membranes for separated cell coculture on both surfaces
  11. One-Step Formation of Microporous Hydrogel Sponges Encapsulating Living Cells by Utilizing Bicontinuous Dispersion of Aqueous Polymer Solutions
  12. A numbering-up strategy of hydrodynamic microfluidic filters for continuous-flow high-throughput cell sorting
  13. Formation of pressurizable hydrogel-based vascular tissue models by selective gelation in composite PDMS channels
  14. Thermally imprinted microcone structure-assisted lateral-flow immunoassay platforms for detecting disease marker proteins
  15. Development of a perfusable 3D liver cell cultivation system via bundling-up assembly of cell-laden microfibers
  16. Micropassage-embedding composite hydrogel fibers enable quantitative evaluation of cancer cell invasion under 3D coculture conditions
  17. Multiphase Microfluidic Processes to Produce Alginate-Based Microparticles and Fibers
  18. Control of invasion direction of cancer cells using hierarchically patterned hydrogel sheets
  19. Direct Observation of Splitting in Oil-In-Water-In-Oil Emulsion Droplets via a Microchannel Mimicking Membrane Pores
  20. Collagen Microparticle-Mediated 3D Cell Organization: A Facile Route to Bottom-up Engineering of Thick and Porous Tissues
  21. 7th Advances in Microfluidics & Nanofluidics (AMN)/9th International Symposium on Microchemistry and Microsystems (ISMM)/5th Asia-Pacific Chemical and Biological Microfluidic Conference (APCBM)/8th Australia New Zealand Nano-Microfluidics Symposium (AN...
  22. Assembly of carbon nanotubes into microparticles with tunable morphologies using droplets in a non-equilibrium state
  23. Microstructure Formation on Polytetrafluoroethylene (PTFE) and Perfluoroalkoxy (PFA) Bulk Plates by a Magnetron Enhanced Reactive Ion Etching System
  24. Slanted, asymmetric microfluidic lattices as size-selective sieves for continuous particle/cell sorting
  25. Microfluidics-based wet spinning of protein microfibers as solid scaffolds for 3D cell cultivation
  26. Fabrication of multilayered vascular tissues using microfluidic agarose hydrogel platforms
  27. Microfluidic System Enabling Multistep Tuning of Extraction Time Periods for Kinetic Analysis of Droplet-Based Liquid–Liquid Extraction
  28. Enhancement of osteoblastic differentiation in alginate gel beads with bioactive octacalcium phosphate particles
  29. A new method for continuous sorting of cells/particles using lattice-shaped dual-depth microchannels
  30. Morphology control of protein microparticles produced using microfluidic droplets in a non-equilibrium state
  31. One-step microfluidic spinning of collagen microfibers and their application to cell cultivation
  32. Magnetic assembly of microfluidic spun alginate microfibers for fabricating three-dimensional cell-laden hydrogel constructs
  33. Formation of Monodisperse Hierarchical Lipid Particles Utilizing Microfluidic Droplets in a Nonequilibrium State
  34. Cell-sized condensed collagen microparticles for preparing microengineered composite spheroids of primary hepatocytes
  35. On-chip fabrication and magnetic force estimation of peapod-like hybrid microfibers using a microfluidic device
  36. In vitro assessment of osteoblastic differentiation of encapsulated stromal cells in alginate/octacalcium phosphate
  37. Asymmetric lattice-shaped microchannel structures for continuous size-dependent cell sorting
  38. Shape control of cell-embedding hydrogel microstructures utilizing non-equilibrium aqueous two-phase systems
  39. Patterned hydrogel microfibers prepared using multilayered microfluidic devices for guiding network formation of neural cells
  40. Facile fabrication processes for hydrogel-based microfluidic devices made of natural biopolymers
  41. One-step synthesis of spherical/nonspherical polymeric microparticles using non-equilibrium microfluidic droplets
  42. On-chip fabrication of magnetic alginate hydrogel microfibers by multilayered pneumatic microvalves
  43. Preparation of stripe-patterned heterogeneous hydrogel sheets using microfluidic devices for high-density coculture of hepatocytes and fibroblasts
  44. Low-pressure plasma-etching of bulk polymer materials using gas mixture of CF4 and O2
  45. Cell encapsulation into alginate/octacalcium phosphate hydrogel beads for bone regenerative therapy
  46. Controlled patterning of magnetic hydrogel microfibers under magnetic tweezers
  47. Microfabricated complex hydrogel fibers for quantitative evaluation of cancer cell invasion in in vivo tissue-like environments
  48. Preparation and characterization of magnetic PEGDA beads for enhanced construction of hydrogel assembly
  49. Size dependent cell sorting systems and characteristic of cell groups
  50. Microfluidic production of single micrometer-sized hydrogel beads utilizing droplet dissolution in a polar solvent
  51. Automated Construction System for 3D Lattice Structure Based on Alginate Gel Fiber Containing Living Cells
  52. Formation of Cell Aggregates Using Microfabricated Hydrogel Chambers for Assembly into Larger Tissues
  53. Magnetophoresis-Integrated Hydrodynamic Filtration System for Size- and Surface Marker-Based Two-Dimensional Cell Sorting
  54. Assembly techniques for artificial small diameter blood vessel structures
  55. Magnetic manipulation for spatially patternel alginate hydrogel microfibers
  56. A droplet-based microfluidic process to produce yarn-ball-shaped hydrogel microbeads
  57. Microfluidic counterflow centrifugal elutriation system for sedimentation-based cell separation
  58. Controlled formation of heterotypic hepatic micro-organoids in anisotropic hydrogel microfibers for long-term preservation of liver-specific functions
  59. Micropatterning of Hydrogels on Locally Hydrophilized Regions on PDMS by Stepwise Solution Dipping and in Situ Gelation
  60. Isolation of cell nuclei in microchannels by short-term chemical treatment via two-step carrier medium exchange
  61. Fabrication of vascular tissue models by assembling multiple cell types inside hydrogel microchannels
  62. Manipulation of cells and cell spheroids using collagen hydrogel microbeads prepared by microfluidic devices
  63. Microfluidic synthesis of chemically and physically anisotropic hydrogel microfibers for guided cell growth and networking
  64. Fabrication of Complex Hydrogel Materials by Utilizing Microfluidics and Micromolding
  65. Fluidic preparation of patterned hydrogel fibers using micronozzle-array devices for neural cell guidance
  66. Fabrication of functional hydrogel microbeads utilizing non-equilibrium microfluidics for biological applications
  67. Size-dependent sorting of corneal limbal epithelial cell with microfluidic chip
  68. Generation of uniform-size droplets by multistep hydrodynamic droplet division in microfluidic circuits
  69. Observation of nonspherical particle behaviors for continuous shape-based separation using hydrodynamic filtration
  70. Sedimentation pinched-flow fractionation for size- and density-based particle sorting in microchannels
  71. Fluidic shear-assisted formation of actuating multilamellar lipid tubes using microfabricated nozzle array device
  72. Formation of self-actuating lipid tubes using microfabricated picoliter nozzle array
  73. Blood cell classification utilizing hydrodynamic filtration
  74. Development of microfluidic cell nucleus separator employing rapid chemical treatment
  75. Sol–gel based fabrication of hybrid microfluidic devices composed of PDMS and thermoplastic substrates
  76. Editorial: Asia Pacific Biochemical engineering
  77. Key role for transketolase activity in erythritol production by Trichosporonoides megachiliensis SN-G42
  78. Microfabrication of Transparent Thermoplastic Resin Plates by Dry Etching
  79. Patterning Reactive Microdomains inside Polydimethylsiloxane Microchannels by Trapping and Melting Functional Polymer Particles
  80. In-channel focusing of flowing microparticles utilizing hydrodynamic filtration
  81. Polymer surface morphology control by reactive ion etching for microfluidic devices
  82. Hydrodynamic control of droplet division in bifurcating microchannel and its application to particle synthesis
  83. Continuous and precise particle separation by electroosmotic flow control in microfluidic devices
  84. Continuous and Size-Dependent Sorting of Emulsion Droplets Using Hydrodynamics in Pinched Microchannels
  85. Millisecond treatment of cells using microfluidic devices via two-step carrier-medium exchange
  86. Blood Cell Classification Utilizing Hydrodynamic Filtration
  87. Microfluidic devices for size-dependent separation of liver cells
  88. Rapid quantification of bacterial cells in potable water using a simplified microfluidic device
  89. Polymer Surface Morphology Control for Microfluidic Devices
  90. Continuous separation of particles using a microfluidic device equipped with flow rate control valves
  91. Phenylpropanoid metabolite supports cell aggregate formation in strawberry cell suspension culture
  92. Microfluidic Particle Sorter Employing Flow Splitting and Recombining
  93. A microfluidic flow distributor generating stepwise concentrations for high-throughput biochemical processing
  94. Rapid enumeration of bacterial cells in drinking water using a microfluidic device
  95. Hydrogen Production from Glucose by Anaerobes
  96. Separation of cultured strawberry cells producing anthocyanins in aqueous two-phase system
  97. Development of a passive micromixer based on repeated fluid twisting and flattening, and its application to DNA purification
  98. Hydrodynamic filtration for on-chip particle concentration and classification utilizing microfluidics
  99. Continuous particle separation in a microchannel having asymmetrically arranged multiple branches
  100. Control-free Air Vent System for Ultra-low Volume Sample Injection on a Microfabricated Device
  101. Enhanced accumulation of anthocyanin in cultured strawberry cells by repetitive feeding of l-Phenylalanine into the medium
  102. Pinched Flow Fractionation:  Continuous Size Separation of Particles Utilizing a Laminar Flow Profile in a Pinched Microchannel
  103. Nanoliter-Sized Liquid Dispenser Array for Multiple Biochemical Analysis in Microfluidic Devices
  104. Preparation characteristics of water-in-oil-in-water multiple emulsions using microchannel emulsification
  105. Continuous cell partitioning using an aqueous two-phase flow system in microfluidic devices
  106. Cultivation of Yeast and Plant Cells Entrapped in the Low-Viscous Liquid-Core of an Alginate Membrane Capsule Prepared Using Polyethylene Glycol
  107. Effect of interfacial tension on the dynamic behavior of droplet formation during microchannel emulsification
  108. Evaluation of Mass-Transfer Characteristics in Alginate-Membrane Liquid-Core Capsules Prepared Using Polyethylene Glycol
  109. Pressure-Driven Sample Injection with Quantitative Liquid Dispensing for On-Chip Electrophoresis
  110. Can lipases hydrolyze a peptide bond?
  111. Stimulatory Effect of an Indirectly Attached RNA Helicase-Recruiting Sequence on the Suppression of Gene Expression by Antisense Oligonucleotides
  112. Characterization of Spontaneous Transformation-Based Droplet Formation during Microchannel Emulsification
  113. Preparation of Monodispersed Polymeric Microspheres over 50 μm Employing Microchannel Emulsification
  114. Effect of Channel Structure on Microchannel Emulsification
  115. Isolation and Characterization of Polyhydroxyalkanoates Inclusions and Their Associated Proteins inPseudomonassp. 61-3
  116. Interesterification and hydrolysis catalyzed by fatty acid-modified lipases
  117. Prediction of Droplet Diameter for Microchannel Emulsification
  118. Preparation of monodispersed emulsion with large droplets using microchannel emulsification
  119. Screening for transgenic plant cells that highly express a target gene from genetically mixed cells
  120. Structural study of lipase modified with fatty acids
  121. Microfabricated Polymer Chip for Capillary Gel Electrophoresis
  122. Interfacial Tension Driven Monodispersed Droplet Formation from Microfabricated Channel Array
  123. Biosynthesis of Poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) Copolymer from Sugars by RecombinantRalstoniaeutrophaHarboring thephaC1Psand thephaGPsGenes ofPseudomonassp. 61-3
  124. Formation and Characterization of Reversed Micelles Composed of Phospholipids and Fatty Acids
  125. Synthesis of Polymeric Microspheres with Narrow Size Distributions Employing Microchannel Emulsification
  126. Small-Angle X-Ray Scattering Analysis of Stearic Acid Modified Lipase
  127. Effect of hydrocarbon-water interfaces on synthetic and hydrolytic activities of lipases
  128. Integration of gene amplification and capillary gel electrophoresis on a polydimethylsiloxane-glass hybrid microchip
  129. Preparation Characteristics of Monodispersed Water-in-Oil Emulsions Using Microchannel Emulsification.
  130. Formation of biocompatible reversed micellar systems using phospholipids
  131. Glucocorticoid-induced expression of a foreign gene by the GVG system in transformed tobacco BY-2 cells
  132. Cloning and Characterization of the Pseudomonas sp. 61-3 phaG Gene Involved in Polyhydroxyalkanoate Biosynthesis
  133. Oil-water interfacial activation of lipase for interesterification of triglyceride and fatty acid
  134. Preparation of Monodispersed Solid Lipid Microspheres Using a Microchannel Emulsification Technique
  135. Quantitative determination of cultured strawberry-cell heterogeneity by image analysis: effects of medium modification on anthocyanin accumulation
  136. Intermittent light irradiation with second- or hour-scale periods controls anthocyanin production by strawberry cells☆
  137. Analysis of pigment accumulation heterogeneity in plant cell population by image-processing system
  138. Microfabricated Structures for Bioseparation
  139. Mathematical model analyzes light-controlled expression of the CHS promoter in BY-2 cells
  140. Plant Cell Immobilization in Loofa Sponge Using Two-Way Bubble Circular System.
  141. Kinetic analysis of cell growth and vitamin e production in plant cell culture of carthamus tinctorius using a structured model
  142. Enhanced Anthocyanin Methylation by Growth Limitation in Strawberry Suspension Culture
  143. Metabolic responses of plant cell culture to hydrodynamic stress
  144. Anthocyanin synthesis, growth and nutrient uptake in suspension cultures of strawberry cells
  145. Characteristics of loofa (Luffa cylindrica) sponge as a carrier for plant cell immobilization
  146. Effect of temperature and its shift on growth and anthocyanin production in suspension cultures of strawberry cells
  147. Taxol (paclitaxel) production using free and immobilized cells ofTaxus cuspidata
  148. Influence of Conditioned Medium on Cyanidin and Peonidin Synthesis.
  149. Changes of anthocyanin composition by conditioned medium and cell inoculum size using strawberry suspension culture
  150. Evaluation of Co-Immobilized Lactobacillus Delbrueckii with Porous Particles for Lactic Acid Production.
  151. Mathematical model for analysis of mass transfer for immobilized cells in lactic acid fermentation
  152. Characteristics of immobilized Lactobacillus delbrueckii in a liquid-solid fluidized bed bioreactor for lactic acid production.
  153. Continuous production of taxol by cell culture of taxus cuspidata.
  154. Effect of CO2 concentration of growth and carbon fixation rate of pleurochrysis carterae.
  155. Mass transfer behavior in lactic acid fermentation using immobilized Lactobacillus delbrueckii.
  156. Effects of conditioning factor on anthocyanin production in strawberry suspension cultures
  157. Use of auxin and cytokinin to regulate anthocyanin production and composition in suspension cultures of strawberry cell
  158. Hydrodynamic damage of cultured cells of Carthamus tinctorius in a stirred tank reactor.
  159. Increased alkaloid production in a suspension culture of Coffea arabica cells using an adsorption column for product removal
  160. Effect of Co-immobilization of Microporous Particles on the Overall Reaction Rate of Immobilized Cell Biocatalysts.
  161. Factors Affecting Vitamin E Production Using Plant Cell Culture of Carthamus Tinctorius.
  162. Influence of light irradiation rates and irradiation modes on caffeine production and cell growth in suspension culture of Coffea arabica cells.
  163. Cell Growth and Reaction Characteristics of Immobilized Zymomonas mobilis
  164. Effect of Light on Caffeine Production by Plant Cells of Coffea arabicaa
  165. Microbial production of cis, cis-muconic acid from benzoic acid
  166. Effect of intraparticle mass transfer resistance on reactivity of immobilized yeast cells.
  167. Effect of intraparticle diffusion on reaction by immobilized growing yeast.
  168. Reaction characteristics of an immobilized yeast producing ethanol
  169. Nanomechanics of ultrathin silicon beams and carbon nanotubes
  170. Formation of monodispersed microspheres from microfabricated channel array
  171. Multiple diagnostic analyses by enzymatic and chemical reaction on a PDMS microchip
  172. PDMS (polydimethylsiloxane)-glass hybrid microchip for gene amplification