All Stories

  1. Comprehensive energy balance analysis and techno-economic evaluation of static hydrogen carbon savings for an industrial dual-fuel combustor used in food manufacturing
  2. Short-Term Electric Vehicle Load Forecasting for Proactive Transformer Protection
  3. Intelligent energy-aware control of a single-stage photovoltaic-battery powered brackish water reverse osmosis desalination system
  4. Moisture ingress evaluation of encapsulation materials using multiphysics modelling for perovskite solar cell packaging
  5. Critical weight percent of graphene nanoplatelets (GNPs) that optimizes water barrier and transport properties of ethylene vinyl acetate (EVA) for improved photovoltaic module packaging reliability
  6. Smart Grid Integration of Electric Vehicle and PV Systems with Ant Colony and Neural Network Based Control System
  7. A Systematic Review of Hierarchical Control Frameworks in Resilient Microgrids: South Africa Focus
  8. Parametric Identification of a Deep-Cycle Gel Battery Using the Recursive Least Squares (RLS)
  9. Economic Analysis of A Rule-Based PV-BESS-H2 Hybrid System
  10. Energy-Efficient Zonal HVAC Control using Iot, CCTV Occupancy Analytics and MPC
  11. Power Electronics and Control for an off-Grid Agrivoltaic Irrigation System
  12. Energy and Water Management in Smart Buildings Using Spiking Neural Networks: A Low-Power, Event-Driven Approach for Adaptive Control and Anomaly Detection
  13. High-Performance HD-GAA MOSFETs for Energy-Efficient Smart City Applications
  14. Comparative Analysis of Emissions and Fuel Costs in Methanol Retrofitted Crew Transfer Vessels
  15. Forecasting Vessel Power Using Variational Mode Decomposition and Convolutional Neural Networks
  16. Performance Analysis of Model Predictive Control and Perturb & Observe MPPT for Solar PV Systems
  17. Development of a Photovoltaic (PV) Solar Energy Technology Training Module for STEM Undergraduates for Solar Energy Sector Deployment
  18. Design and Implementation of Deep Discharge Control in Lithium-ion Batteries Recycling
  19. Industrial Energy Forecasting Using Machine Learning and Plant Activity Metrics
  20. Low-Power Energy-Efficient Hetero-Dielectric Gate-All-Around MOSFETs: Enablers for Sustainable Smart City Technology
  21. High-Volume Battery Recycling: Technical Review of Challenges and Future Directions
  22. High-Volume Battery Recycling: Technical Review of Challenges and Future Directions
  23. Parameters Estimation of Three-Phase Induction Motor Using the Parameter Estimator App
  24. A novel hybrid enhanced oil recovery technique to enhance oil production from oil-wet carbonate reservoirs by combining electrical heating with nanofluid flooding
  25. A Review of the EoL EV Batteries Sorting and Disassembly Challenges
  26. PLC & Scada Based Automation for Smart Juice Manufacturing Process
  27. Technologies for EoL EV Batteries Recycling: Assessment and Proposals
  28. Integrated Operational Planning For Smart Electric Networks in Middlesbrough, UK
  29. Parallel Implementation of Fuzzy-PID Controllers for Pitch Control of Offshore Wind Turbines
  30. Transient Recovery of Energy Storage Balance in DC Microgrids with MARL-Based Power Control
  31. On Probabilistic Timing Analysis of Fault-Tolerant Real-Time Systems Experiencing Random Errors
  32. Advanced MARL-Based control of decentralized battery energy storage systems
  33. Preface: 4th International Conference on Robotics, Intelligent Automation and Control Technologies (RIACT 2023)
  34. An internet of things development framework for smart city pilot study
  35. Electrical Heating Impacts on Wetting Properties in Electrical Enhanced Oil Recovery (EEOR)
  36. Multiagent-Based Control for Plug-and-Play Batteries in DC Microgrids with Infrastructure Compensation
  37. Plug-and-Play MARL for SoC and Power Balance Regulation of Heterogeneous BESSs
  38. Critical skills needs and challenges for STEM/STEAM graduates increased employability and entrepreneurship in the solar energy sector
  39. Design and Development of Integrated Data Acquisition System to Replace Power Analyser for Power Quality Measurement and Analysis
  40. Multiagent Power Flow Control for Plug-and-Play Battery Energy Storage Systems in DC Microgrids
  41. Lateral Control of Air-breathing Hypersonic Vehicle Using Model Predictive Control
  42. Development and Test of a Prototype IoT-based Energy-Aware Distributed Control System(eDCS)
  43. Towards a Smarter City in Bangkok: Exploring the impacts of digital intermodal transport and logistics services
  44. Cost and environmental benefit analysis: An assessment of renewable energy integration and smart solution technologies in the InteGRIDy project
  45. Energy Consumption Modeling and Forecasting for Commercial Industrial Manufacturing Applications
  46. Evaluation framework for Techno-economic analysis of energy system retrofit technologies
  47. Reinforcement Learning-Based Intelligent Control Strategies for Optimal Power Management in Advanced Power Distribution Systems: A Survey
  48. Cost-effective electrification of remote houses and communities with renewable energy sources
  49. Preface: 3rd International Conference on Robotics, Intelligent Automation and Control Technologies (RIACT 2022)
  50. Towards sustainable transport in Bangkok
  51. Using magnesium oxide nanoparticles in a magnetic field to enhance oil production from oil-wet carbonate reservoirs
  52. Design and Analysis of Cumulative Regenerative System for a 42 kWh Battery Pack
  53. Experimental study of electrical heating to enhance oil production from oil-wet carbonate reservoirs
  54. A feasibility study on emissions reductions and demand response in a seaport building
  55. A feasibility study on regeneration capture on a seaport electrified gantry crane
  56. A Qualitative Based Causal-Loop Diagram for Understanding Policy Design Challenges for a Sustainable Transition Pathway: The Case of Tees Valley Region, UK
  57. Developing a user interface to define wettability in real time using digital techniques: proof-of-concept
  58. Optimal Battery Dispatch Using Finite-Input Set Non-Linear Model Predictive Control: Algorithm Development and Case Study
  59. On binomial quantile and proportion bounds: With applications in engineering and informatics
  60. Strategies for Controlling Microgrid Networks with Energy Storage Systems: A Review
  61. Preface
  62. Transitioning to Society 5.0 in Africa: Tools to Support ICT Infrastructure Sharing
  63. An Integrated Approach to Adaptive Control and Supervisory Optimisation of HVAC Control Systems for Demand Response Applications
  64. Smooth particle filter‐based likelihood approximations for remaining useful life prediction of Lithium‐ion batteries
  65. Robotic Arm for Biomedical Applications
  66. Control and Informatics for Demand Response and Renewables Integration
  67. First Step Towards a System Dynamic Sustainability Assessment Model for Urban Energy Transition
  68. Time-Frequency Image Analysis and Transfer Learning for Capacity Prediction of Lithium-Ion Batteries
  69. A Decentralized Informatics, Optimization, and Control Framework for Evolving Demand Response Services
  70. Towards Self-Sustainable Island Grids through Optimal Utilization of Renewable Energy Potential and Community Engagement
  71. Lifetime Degradation Cost Analysis for Li-Ion Batteries in Capacity Markets using Accurate Physics-Based Models
  72. Electrical and Mechanical Sensor-Based Mass Flow Rate Measurement System: A Comparative Approach
  73. Telecommunication Infrastructure Sharing a Remedy for the Reduction of Network Operator Cost and Environmental Pollution
  74. Electricity demand forecasting for decentralised energy management
  75. On the Role of Regulatory Policy on the Business Case for Energy Storage in Both EU and UK Energy Systems: Barriers and Enablers
  76. Degradation Cost Analysis of Li-Ion Batteries in the Capacity Market with Different Degradation Models
  77. Optimal Dispatch of Aggregated HVAC Units for Demand Response: An Industry 4.0 Approach
  78. An Industrial Digitalization Platform for Condition Monitoring and Predictive Maintenance of Pumping Equipment
  79. On the use of thermal inertia in building stock to leverage decentralised demand side frequency regulation services
  80. Demand Response Technology Readiness Levels for Energy Management in Blocks of Buildings
  81. Eligible earliest deadline first: Server-based scheduling for master-slave industrial wireless networks
  82. A Microcontroller-Based Adaptive Model Predictive Control Platform for Process Control Applications
  83. Integrating Technologies for Demand Response in Blocks of Buildings - A UK Case Study
  84. Timing analysis for embedded systems using non-preemptive EDF scheduling under bounded error arrivals
  85. Demand response in blocks of buildings: opportunities and requirements
  86. Move Suppression Calculations for Well-Conditioned MPC
  87. Smart Grid Inspired Future Technologies
  88. Load forecasting and dispatch optimisation for decentralised co-generation plant with dual energy storage
  89. Future Demand Response Services for Blocks of Buildings
  90. Heuristic scheduling of multiple smart home appliances: Utility planning perspective
  91. A transmission window technique for CAN networks
  92. An embedded prototype of a residential smart appliance scheduling system
  93. Scheduling master-slave wireless networks in the presence of interference
  94. An improved CMOS-based inductor simulator with simplified structure for low-frequency applications
  95. Tunneling Horizontal IEC 61850 Traffic through Audio Video Bridging Streams for Flexible Microgrid Control and Protection
  96. Bounds on Worst-Case Deadline Failure Probabilities in Controller Area Networks
  97. Heuristic Optimization of Consumer Electricity Costs Using a Generic Cost Model
  98. Dependable Control for Wireless Distributed Control Systems
  99. A Note on the Suboptimality of Nonpreemptive Real-time Scheduling
  100. Fault-tolerant generator telecontrol over a microgrid IP network
  101. Evaluation of a heuristic approach for efficient scheduling of residential smart home appliances
  102. Near-optimal scheduling of residential smart home appliances using heuristic approach
  103. Tools to support sustainable entrepreneurship in energy positive neighbourhoods
  104. MODELLING AND VALIDATION OF THE VEHICLE LONGITUDINAL MODEL
  105. Simple bounds on deadline failure probabilities in fault-tolerant real-time networks
  106. Jitter sensitivity of a self-tuning input-constrained predictive controller
  107. Improved Inequalities for the Poisson and Binomial Distribution and Upper Tail Quantile Functions
  108. An experimental HIL study on the jitter sensitivity of an adaptive control system
  109. Review of Creep Cavitation and Rupture of Low Cr Alloy and its Weldment
  110. Towards Efficient Probabilistic Scheduling Guarantees for Real-Time Systems Subject to Random Errors and Random Bursts of Errors
  111. A first qualitative evaluation of star replication schemes for FTT-CAN
  112. A hybrid EDF algorithm for implementing resource-constrained real-time control applications
  113. A test facility for experimental HIL analysis of industrial embedded control systems
  114. Application level compensation for burst errors in wireless control networks
  115. Real-time infinite horizon adaptive/predictive control for Smart home HVAC applications
  116. Current State of Developing Creep Damage Constitutive Equation for 0.5Cr0.5Mo0.25V Ferritic Steel
  117. Analysis and redesign of the ‘TTC’ and ‘TTH’ schedulers
  118. Fast online identification of low-order time-delayed industrial processes
  119. Optimised implementation of adaptive GPC for low-order systems with time delays
  120. RTE-SIM: A Simple, Low-Cost and Flexible Environment to Support the Teaching of Real-Time and Embedded Control
  121. Bandwidth-efficient burst error tolerance in TDMA-based CAN networks
  122. Improved schedulability analysis of implicit deadline tasks under limited preemption EDF scheduling
  123. A generic controller architecture for intelligent robotic systems
  124. Conformance Testing of Soft-Core Can Controllers: A Low-Cost and Practical Approach
  125. On the Implementation of Dependable Real-Time Systems with Non-Preemptive EDF
  126. Calorimeters and Techniques Used for Power Loss Measurements in Electrical Machines
  127. Improving information throughput and transmission predictability in Controller Area Networks
  128. Analysis of overclocked controller area network
  129. Timely Recovery from Task Failures in Non-preemptive, Deadline-driven Schedulers
  130. Improved Task Management Techniques for Enforcing EDF Scheduling on Recurring Tasks
  131. A note on ‘Efficient scheduling of periodic information monitoring requests’
  132. A minimal kernel for implementing dependable real-time control applications
  133. Exact and Heuristic Algorithms for Thrift Cyclic Scheduling
  134. Reducing message-length variations in resource-constrained embedded systems implemented using the Controller Area Network (CAN) protocol
  135. Assessment of performance and dependability in embedded control systems: Methodology and case study
  136. Assessment of high-integrity embedded automotive control systems using hardware in the loop simulation
  137. Exploring the Impact of Task Preemption on Dependability in Time-Triggered Embedded Systems: A Pilot Study
  138. Development guidelines for dependable real-time embedded systems
  139. Two novel shared-clock scheduling algorithms for use with ‘Controller Area Network’ and related protocols
  140. Fault-Tolerant Time-Triggered Communication Using CAN
  141. Assessing the Impact of Redundancy on Performance and Reliability in a Drive-By-Wire System
  142. A software tool for automating the design of robot fuzzy force controllers
  143. Hardware in the loop simulation of embedded automotive control system
  144. Adaptive and Nonlinear Fuzzy Force Control Techniques Applied to Robots Operating in Uncertain Environments