Contact

All Stories

  1. Influence of substrate microstructure on defect formation during Al alloy laser powder bed fusion

    Article • Additive Manufacturing, May 2026, Elsevier

    Professor Dmitry G Eskin

  2. Mechanical and in situ thermal-related behavior upon directed energy deposition additive manufacturing of a high-performance Al alloy

    Article • International Journal of Extreme Manufacturing, January 2026, Institute of Physics Publishing

    Professor Dmitry G Eskin

  3. The solidification behaviour and high-temperature performance of an additive manufactured Al-Ce-Fe-Ni-Mn aluminium alloy

    Article • January 2026, Elsevier

    Professor Dmitry G Eskin

  4. Revealing in-operando the mesoscale bubble-particle dynamics and energy transfer in sonoprocessing of advanced materials

    Article • January 2026, Elsevier

    Professor Dmitry G Eskin

  5. Design of hot-tearing resistant and thermally stable aluminium alloys for advanced casting technologies

    Article • Materials & Design, December 2025, Elsevier

    Professor Dmitry G Eskin

  6. Ultrasonic cavitation shock wave exfoliation dynamics of 2D materials revealed in situ by MHz XFEL imaging and multiphysics modeling

    Article • Science Advances, November 2025, American Association for the Advancement of Science

    Jayanath Koliyadu, Professor Dmitry G Eskin

  7. Enhancing the properties of a hypereutectic Al-Fe alloy through recycled aluminum scrap and ultrasonic melt processing

    Article • Materials Characterization, October 2025, Elsevier

    Professor Dmitry G Eskin

  8. An integrated numerical modelling framework for simulation of the multiphysics in sonoprocessing of materials

    Article • Ultrasonics Sonochemistry, September 2025, Elsevier

    Professor Dmitry G Eskin

  9. Role of shock waves in materials processing: Fundamentals and Applications

    Article • Ultrasonics Sonochemistry, September 2025, Elsevier

    Professor Dmitry G Eskin

  10. Facilitating Recycling of 6xxx Series Aluminum Alloys by Machine Learning-Based Optimization

    Article • Journal of Sustainable Metallurgy, May 2025, Springer Science + Business Media

    Professor Dmitry G Eskin

  11. Assessment of aqueous graphene as a cancer therapeutics delivery system

    Article • Scientific Reports, May 2025, Springer Science + Business Media

    Professor Dmitry G Eskin

  12. Synchronized acoustic emission and high-speed imaging of cavitation-induced atomization: The role of shock waves

    Article • Ultrasonics Sonochemistry, February 2025, Elsevier

    Professor Dmitry G Eskin

  13. A New Approach to the Design of Al Alloys with Low Cracking Susceptibility and High-Temperature Strength for Cast and Additive Manufacturing

    Article • January 2025, Springer Science + Business Media

    Professor Dmitry G Eskin

  14. Design of Crack-Resistant and Thermally Stable Aluminium Alloys for Advanced Casting Technologies

    Article • January 2025, Elsevier

    Professor Dmitry G Eskin

  15. Towards the Design of Highly Heterogeneous Aluminum Alloys

    Article • January 2025, Springer Science + Business Media

    Professor Dmitry G Eskin

  16. Conversion of Aluminum to Hydrogen: A Metallurgical Point of View

    Article • Advanced Engineering Materials, August 2024, Wiley

    Professor Dmitry G Eskin

  17. Dual frequency ultrasonic liquid phase exfoliation method for the production of few layer graphene in green solvents

    Article • Ultrasonics Sonochemistry, August 2024, Elsevier

    Professor Dmitry G Eskin

  18. The improvement of deformability in AA7075 alloy through cryogenic treatment and its correlation with microstructural evolution and FE modelling

    Article • Scientific Reports, July 2024, Springer Science + Business Media

    Professor Dmitry G Eskin

  19. Microstructural Evolution and Property Evaluation of In Situ Al–MgAl2O4 Nanocomposite Prepared by γ‐Al2O3 and Ultrasonication‐Assisted Impeller Mixing

    Article • Advanced Engineering Materials, June 2024, Wiley

    Professor Dmitry G Eskin

  20. New insights into the mechanism of ultrasonic atomization for the production of metal powders in additive manufacturing

    Article • Additive Manufacturing, March 2024, Elsevier

    Professor Dmitry G Eskin

  21. Enhancing ambient and elevated temperature performance of hypoeutectic Al–Ce cast alloys by Al3(Sc,Zr) precipitate

    Article • Journal of Materials Research and Technology, January 2024, Elsevier

    Professor Dmitry G Eskin

  22. Precipitation hardening and structure evolution in hypereutectic Al-6 % Fe-Zr alloys subjected to ultrasonic melt processing

    Article • Journal of Alloys and Compounds, January 2024, Elsevier

    Professor Dmitry G Eskin

  23. Effect of water temperature and induced acoustic pressure on cavitation erosion behaviour of aluminium alloys

    Article • Tribology International, November 2023, Elsevier

    Professor Dmitry G Eskin

  24. Microstructure, Hardening, and Mechanical Properties of Hypoeutectic Al–Ce–Ni Alloys with Zr and Zr + Sc Additions and the Effect of Ultrasonic Melt Processing

    Article • Advanced Engineering Materials, August 2023, Wiley

    Professor Dmitry G Eskin

  25. Classification of T6 Tempered 6XXX Series Aluminum Alloys Based on Machine Learning Principles

    Article • JOM, August 2023, Springer Science + Business Media

    Professor Dmitry G Eskin

  26. For Georgy I. Eskin – On the occasion of his 90th birthday

    Article • Ultrasonics Sonochemistry, August 2023, Elsevier

    Professor Dmitry G Eskin

  27. Sonoprocessing of materials (Special issue)

    Article • Ultrasonics Sonochemistry, June 2023, Elsevier

    Professor Dmitry G Eskin

  28. Synergetic grain refinement and ZrB2 hardening in in-situ ZrB2/AA4032-type composites by ultrasonic assisted melt treatment

    Article • Journal of Materials Research and Technology, May 2023, Elsevier

    Professor Dmitry G Eskin

  29. Effects of green solvents and surfactants on the characteristics of few-layer graphene produced by dual-frequency ultrasonic liquid phase exfoliation technique

    Article • Carbon, March 2023, Elsevier

    Professor Dmitry G Eskin

  30. Investigation of mechanical properties of Al3Zr intermetallics at room and elevated temperatures using nanoindentation

    Article • Intermetallics, March 2023, Elsevier

    Professor Dmitry G Eskin

  31. Cavitation-induced shock wave behaviour in different liquids

    Article • Ultrasonics Sonochemistry, March 2023, Elsevier

    Professor Dmitry G Eskin

  32. An eco-friendly solution for liquid phase exfoliation of graphite under optimised ultrasonication conditions

    Article • Carbon, February 2023, Elsevier

    Professor Dmitry G Eskin

  33. Dual frequency ultrasonic cavitation in various liquids: High-speed imaging and acoustic pressure measurements

    Article • Physics of Fluids, January 2023, American Institute of Physics

    Professor Dmitry G Eskin

  34. Effect of Zr and Sc on Intermetallic Morphology and Hardening of an Al–Fe Alloy

    Article • January 2023, Springer Science + Business Media

    Professor Dmitry G Eskin

  35. Manufacture of Nano-to-Submicron-Scale TiC Particulate Reinforced Aluminium Composites by Ultrasound-Assisted Stir Casting

    Article • January 2023, Springer Science + Business Media

    Professor Dmitry G Eskin

  36. Stability of SiC and Al2O3 Reinforcement Particles in Thermomechanical Processed Direct Chill Cast Al MMnCs

    Article • January 2023, Springer Science + Business Media

    Professor Dmitry G Eskin

  37. Direct Evidence of the Exfoliation Efficiency and Graphene Dispersibility of Green Solvents toward Sustainable Graphene Production

    Article • ACS Sustainable Chemistry & Engineering, December 2022, American Chemical Society (ACS)

    Professor Dmitry G Eskin

  38. Temperature as a key parameter for graphene sono-exfoliation in water

    Article • Ultrasonics Sonochemistry, November 2022, Elsevier

    Professor Dmitry G Eskin

  39. Tuning homogenization of high-strength aluminum alloys through thermodynamic alloying approach

    Article • Materials & Design, September 2022, Elsevier

    Professor Dmitry G Eskin

  40. Multiscale interactions of liquid, bubbles and solid phases in ultrasonic fields revealed by multiphysics modelling and ultrafast X-ray imaging

    Article • Ultrasonics Sonochemistry, September 2022, Elsevier

    Professor Dmitry G Eskin

  41. Tailoring precipitation/properties and related mechanisms for a high-strength aluminum alloy plate via low-temperature retrogression and re-aging processes

    Article • Journal of Material Science and Technology, September 2022, Elsevier

    Professor Dmitry G Eskin

  42. Characterization of the Anodic Film and Corrosion Resistance of an A535 Aluminum Alloy after Intermetallics Removal by Different Etching Time

    Article • Metals, July 2022, MDPI AG

    Professor Dmitry G Eskin

  43. Direct evidence of exfoliation efficiency and graphene dispersibility of green solvents towards sustainable graphene production

    Article • June 2022, American Chemical Society (ACS)

    Professor Dmitry G Eskin

  44. Processing of SiC nano-reinforced AlSi9Cu3 composites by stir mixing, ultrasonication and high pressure die casting

    Article • Journal of Materials Research and Technology, May 2022, Elsevier

    Professor Dmitry G Eskin

  45. Microstructure and properties of a nanostructured W-31 wt% Cu composite produced by magnetic pulse compaction of bimetallic nanoparticles

    Article • International Journal of Refractory Metals and Hard Materials, February 2022, Elsevier

    Professor Dmitry G Eskin

  46. Ultrafast synchrotron X-ray imaging and multiphysics modelling of liquid phase fatigue exfoliation of graphite under ultrasound

    Article • Carbon, January 2022, Elsevier

    Professor Dmitry G Eskin

  47. An Eco-Friendly Solution for Liquid Phase Exfoliation of Graphite Under Optimised Ultrasonication Conditions

    Article • SSRN Electronic Journal, January 2022, Elsevier

    Professor Dmitry G Eskin

  48. Cavitation in thermoplastic melts: New insights into ultrasound-assisted fibre-impregnation

    Article • Composites Part B Engineering, January 2022, Elsevier

    Professor Dmitry G Eskin

  49. Effect of Flow Management on Ultrasonic Melt Processing in a Launder upon DC Casting

    Article • January 2022, Springer Science + Business Media

    Professor Dmitry G Eskin

  50. Effect of Homogenization on Anodic Film and Electrochemical Behavior of an A535 Alloy After Sealing with Stearic Sealant

    Article • January 2022, Springer Science + Business Media

    Professor Dmitry G Eskin

  51. Effects of Green Solvents and Surfactants on the Characteristics of Few-Layer Graphene Produced by Dual-Frequency Ultrasonic Liquid Phase Exfoliation Technique

    Article • SSRN Electronic Journal, January 2022, Elsevier

    Professor Dmitry G Eskin

  52. High-Speed Observations of Ultrasonic Fragmentation and De-agglomeration Process of Free-Floating Intermetallics and Oxide Particles

    Article • January 2022, Springer Science + Business Media

    Professor Dmitry G Eskin

  53. Manufacturing of Nano-Reinforced Aluminium Composites By a Combination of Stir Mixing, Ultrasonic Processing, and High-Pressure Die Casting

    Article • January 2022, Springer Science + Business Media

    Professor Dmitry G Eskin

  54. In-situ observations and acoustic measurements upon fragmentation of free-floating intermetallics under ultrasonic cavitation in water

    Article • Ultrasonics Sonochemistry, December 2021, Elsevier

    Professor Dmitry G Eskin

  55. Environment friendly dual-frequency ultrasonic exfoliation of few-layer graphene

    Article • Carbon, November 2021, Elsevier

    Professor Dmitry G Eskin

  56. A grain refinement mechanism of cast commercial purity aluminium by vanadium

    Article • Materials Characterization, November 2021, Elsevier

    Professor Dmitry G Eskin

  57. Mechanisms of ultrasonic de-agglomeration of oxides through in-situ high-speed observations and acoustic measurements

    Article • Ultrasonics Sonochemistry, November 2021, Elsevier

    Professor Dmitry G Eskin

  58. Effect of Temperature and Acoustic Pressure During Ultrasound Liquid-Phase Processing of Graphite in Water

    Article • JOM, October 2021, Springer Science + Business Media

    Professor Dmitry G Eskin

  59. New insights into sono-exfoliation mechanisms of graphite: In situ high-speed imaging studies and acoustic measurements

    Article • Materials Today, October 2021, Elsevier

    Professor Dmitry G Eskin

  60. Scale up design study on process vessel dimensions for ultrasonic processing of water and liquid aluminium

    Article • Ultrasonics Sonochemistry, August 2021, Elsevier

    Professor Dmitry G Eskin

  61. New insights into the mechanisms of ultrasonic emulsification in the oil–water system and the role of gas bubbles

    Article • Ultrasonics Sonochemistry, May 2021, Elsevier

    Professor Dmitry G Eskin

  62. Numerical modelling and experimental validation of the effect of ultrasonic melt treatment in a direct-chill cast AA6008 alloy billet

    Article • Journal of Materials Research and Technology, May 2021, Elsevier

    Professor Dmitry G Eskin

  63. Multiphysics Modelling of Ultrasonic Melt Treatment in the Hot-Top and Launder during Direct-Chill Casting: Path to Indirect Microstructure Simulation

    Article • Metals, April 2021, MDPI AG

    Professor Dmitry G Eskin

  64. Characterization of shock waves in power ultrasound

    Article • Journal of Fluid Mechanics, March 2021, Cambridge University Press

    Professor Dmitry G Eskin

  65. Semi-solid Constitutive Parameters and Failure Behavior of a Cast AA7050 Alloy

    Article • Metallurgical and Materials Transactions A, January 2021, Springer Science + Business Media

    Professor Dmitry G Eskin

  66. Effect of Ultrasonic Melt Treatment on the Sump Profile and Microstructure of a Direct-Chill Cast AA6008 Aluminum Alloy

    Article • January 2021, Springer Science + Business Media

    Professor Dmitry G Eskin

  67. Effects of Ultrasonic Melt Processing on Microstructure, Mechanical Properties, and Electrical Conductivity of Hypereutectic Al–Si, Al–Fe, and Al–Ni Alloys with Zr Additions

    Article • January 2021, Springer Science + Business Media

    Professor Dmitry G Eskin

  68. Microstructure Evolution of an Al–Fe–Ni Alloy with Zr and Sc Additions Upon Different Cooling Rates During Solidification for Improving the Mechanical and Electrical Conductivity Properties

    Article • January 2021, Springer Science + Business Media

    Professor Dmitry G Eskin

  69. On the governing fragmentation mechanism of primary intermetallics by induced cavitation

    Article • Ultrasonics Sonochemistry, January 2021, Elsevier

    Professor Dmitry G Eskin

  70. Room-temperature low-cycle fatigue and fracture behaviour of asymmetrically rolled high-strength 7050 aluminium alloy plates

    Article • International Journal of Fatigue, January 2021, Elsevier

    Professor Dmitry G Eskin

  71. Ultrasonic Melt Treatment in a DC Casting Launder: The Role of Melt Processing Temperature

    Article • January 2021, Springer Science + Business Media

    Professor Dmitry G Eskin

  72. Ultrasonic exfoliation of graphene in water: A key parameter study

    Article • Carbon, October 2020, Elsevier

    Professor Dmitry G Eskin

  73. Semi-solid compression of nano/micro-particle reinforced Al-Cu composites: An in situ synchrotron tomographic study

    Article • Materialia, August 2020, Elsevier

    Professor Dmitry G Eskin

  74. Structure Refinement Upon Ultrasonic Melt Treatment in a DC Casting Launder

    Article • JOM, July 2020, Springer Science + Business Media

    Professor Dmitry G Eskin

  75. Structure refinement, mechanical properties and feasibility of deformation of hypereutectic Al–Fe–Zr and Al–Ni–Zr alloys subjected to ultrasonic melt processing

    Article • Materials Science and Engineering A, June 2020, Elsevier

    Professor Dmitry G Eskin

  76. Fractional Solidification for Purification of Recycled Aluminium Alloys

    Article • January 2020, Springer Science + Business Media

    Professor Dmitry G Eskin

  77. Improving Ultrasonic Melt Treatment Efficiency Through Flow Management: Acoustic Pressure Measurements and Numerical Simulations

    Article • January 2020, Springer Science + Business Media

    Professor Dmitry G Eskin

  78. Nanoindentation and Cavitation-Induced Fragmentation Study of Primary Al3Zr Intermetallics Formed in Al Alloys

    Article • January 2020, Springer Science + Business Media

    Professor Dmitry G Eskin

  79. Characterization of Ultrasonic Bubble Clouds in A Liquid Metal by Synchrotron X-ray High Speed Imaging and Statistical Analysis

    Article • Materials, December 2019, MDPI AG

    Professor Dmitry G Eskin

  80. Structure Modification upon Ultrasonic Processing of an AA4032 Piston Alloy: Comparison of Permanent Mold and Direct-Chill Casting

    Article • Metallurgical and Materials Transactions A, December 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  81. Constitutive Behavior of an AA4032 Piston Alloy with Cu and Er Additions upon High-Temperature Compressive Deformation

    Article • Metallurgical and Materials Transactions A, October 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  82. Numerical Modelling of the Ultrasonic Treatment of Aluminium Melts: An Overview of Recent Advances

    Article • Materials, October 2019, MDPI AG

    Professor Dmitry G Eskin

  83. Influence of Titanium Diboride Particle Size on Structure and Mechanical Properties of an Al-Mg Alloy

    Article • Metals, September 2019, MDPI AG

    Professor Dmitry G Eskin

  84. The Role of Ultrasonically Induced Acoustic Streaming in Developing Fine Equiaxed Grains During the Solidification of an Al-2 Pct Cu Alloy

    Article • Metallurgical and Materials Transactions A, September 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  85. Microstructure evolution in an Al-Si piston alloy under ultrasonic melt processing

    Article • IOP Conference Series Materials Science and Engineering, May 2019, Institute of Physics Publishing

    Professor Dmitry G Eskin

  86. Optimization of ultrasonic cavitation processing in the liquid melt flow

    Article • IOP Conference Series Materials Science and Engineering, May 2019, Institute of Physics Publishing

    Professor Dmitry G Eskin

  87. Optimizing the Conditions of Metal Solidification with Vibration

    Article • Metals, March 2019, MDPI AG

    Professor Dmitry G Eskin

  88. Numerical modelling of acoustic streaming during the ultrasonic melt treatment of direct-chill (DC) casting

    Article • Ultrasonics Sonochemistry, February 2019, Elsevier

    Professor Dmitry G Eskin

  89. Joint Effect of Ultrasonic Vibrations and Solid Metal Addition on the Grain Refinement of an Aluminium Alloy

    Article • Metals, February 2019, MDPI AG

    Professor Dmitry G Eskin

  90. Ultrasonic liquid metal processing: The essential role of cavitation bubbles in controlling acoustic streaming

    Article • Ultrasonics Sonochemistry, January 2019, Elsevier

    Professor Dmitry G Eskin

  91. Acoustic Cavitation Measurements and Modeling in Liquid Aluminum

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  92. Altering the Microstructure Morphology by Ultrasound Melt Processing During 6XXX Aluminium DC-Casting

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  93. Effect of Cu Addition on the Microstructure, Mechanical and Thermal Properties of a Piston Al-Si Alloy

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  94. Optimal Stator Design for Oxide Films Shearing Found by Physical Modelling

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  95. The formation of Fe Cu composite based on bimetallic nanoparticles

    Article • Vacuum, January 2019, Elsevier

    Professor Dmitry G Eskin

  96. Understanding the Highly Dynamic Phenomena in Ultrasonic Melt Processing by Ultrafast Synchrotron X-ray Imaging

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

  97. Fundamental studies of ultrasonic melt processing

    Article • Ultrasonics Sonochemistry, December 2018, Elsevier

    Professor Dmitry G Eskin

  98. Microstructure and elevated temperature mechanical properties of a direct-chill cast AA4032 alloy with copper and erbium additions

    Article • Journal of Alloys and Compounds, December 2018, Elsevier

    Professor Dmitry G Eskin

  99. Validation of the Physical Simulations of a Stirred Molten Metal Using Particle Image Velocimetry Data

    Article • JOM, May 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

  100. Experimental and numerical investigation of acoustic pressures in different liquids

    Article • Ultrasonics Sonochemistry, April 2018, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

  101. Data and videos for ultrafast synchrotron X-ray imaging studies of metal solidification under ultrasound

    Article • Data in Brief, April 2018, Elsevier

    Professor Dmitry G Eskin

  102. 3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation

    Article • Scripta Materialia, March 2018, Elsevier

    Dr Christian M Schlepuetz, Professor Dmitry G Eskin

  103. New insights into solidification and phase equilibria in the Al-Al 3 Zr system: Theoretical and experimental investigations

    Article • Journal of Alloys and Compounds, February 2018, Elsevier

    Professor Dmitry G Eskin

  104. In-situ synchrotron X-ray radiography observation of primary Al 2 Cu intermetallic growth on fragments of aluminium oxide film

    Article • Materials Letters, February 2018, Elsevier

    Professor Dmitry G Eskin

  105. Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound

    Article • Acta Materialia, February 2018, Elsevier

    Professor Dmitry G Eskin

  106. Influence of scandium fluoride on the structure and phase composition of Al-Si alloy

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Dmitry G Eskin

  107. Basics of Solidification Processing of Metallic Alloys

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

  108. High-Frequency Vibration and Ultrasonic Processing

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

  109. Sc Applications in Aluminum Alloys: Overview of Russian Research in the 20th Century

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

  110. Thermal Melt Processing of Metallic Alloys

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

  111. A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing

    Article • Acta Materialia, December 2017, Elsevier

    Professor Dmitry G Eskin

  112. In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys

    Article • Ultrasonics Sonochemistry, November 2017, Elsevier

    Professor Dmitry G Eskin

  113. On the microstructural refinement in commercial purity Al and Al-10 wt% Cu alloy under ultrasonication during solidification

    Article • Materials & Design, October 2017, Elsevier

    Professor Dmitry G Eskin

  114. Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium

    Article • Scientific Reports, August 2017, Nature

    Professor Dmitry G Eskin, Professor Mark A Easton

  115. Prospects of In-Situ α-Al2O3 as an Inoculant in Aluminum: A Feasibility Study

    Article • Journal of Materials Engineering and Performance, August 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

  116. Advanced Aluminum Alloys Containing Scandium

    Article • July 2017, Taylor & Francis

    Professor Dmitry G Eskin

  117. Numerical modelling of ultrasonic waves in a bubbly Newtonian liquid using a high-order acoustic cavitation model

    Article • Ultrasonics Sonochemistry, July 2017, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

  118. Ultrasonic effect on the penetration of the metallic melt into submicron particles and their agglomerates

    Article • Russian Journal of Non-Ferrous Metals, July 2017, Allerton Press

    Professor Dmitry G Eskin

  119. Identifying the Stages during Ultrasonic Processing that Reduce the Grain Size of Aluminum with Added Al3Ti1B Master Alloy

    Article • Advanced Engineering Materials, May 2017, Wiley

    Professor Dmitry G Eskin

  120. On the occurrence of a eutectic-type structure in solidification of Al-Zr alloys

    Article • Scripta Materialia, May 2017, Elsevier

    Professor Dmitry G Eskin

  121. Influence of ultrasonic treatment on formation of primary Al 3 Zr in Al–0.4Zr alloy

    Article • Transactions of Nonferrous Metals Society of China, May 2017, Elsevier

    Professor Dmitry G Eskin

  122. Evaluation of Cavitation Erosion Behavior of Commercial Steel Grades Used in the Design of Fluid Machinery

    Article • Metallurgical and Materials Transactions A, March 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

  123. Evaluation of Shearing Time Sufficient for Effective Liquid Metal Processing

    Article • JOM, March 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

  124. Shaping and Forming Comes in All Shapes and Forms

    Article • JOM, February 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

  125. Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography

    Article • Acta Materialia, February 2017, Elsevier

    Professor Dmitry G Eskin

  126. Characterizing the cavitation development and acoustic spectrum in various liquids

    Article • Ultrasonics Sonochemistry, January 2017, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

  127. Effect of Ultrasonic Processing on a Direct Chill Cast AA6082 Aluminium Alloy

    Article • January 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

  128. In Situ Observation of Fragmentation of Primary Crystals by Ultrasonic Cavitation in Water

    Article • January 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

  129. Overview of Ultrasonic Degassing Development

    Article • January 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

  130. Tensile mechanical properties, constitutive parameters and fracture characteristics of an as-cast AA7050 alloy in the near-solidus temperature regime

    Article • Materials Science and Engineering A, January 2017, Elsevier

    Professor Dmitry G Eskin

  131. Potential of an Al-Ti-MgAl2O4 Master Alloy and Ultrasonic Cavitation in the Grain Refinement of a Cast Aluminum Alloy

    Article • Metallurgical and Materials Transactions B, October 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

  132. A New Al-Zr-Ti Master Alloy for Ultrasonic Grain Refinement of Wrought and Foundry Aluminum Alloys

    Article • JOM, October 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

  133. A refining mechanism of primary Al 3 Ti intermetallic particles by ultrasonic treatment in the liquid state

    Article • Acta Materialia, September 2016, Elsevier

    Professor Dmitry G Eskin

  134. Synchrotron quantification of ultrasound cavitation and bubble dynamics in Al–10Cu melts

    Article • Ultrasonics Sonochemistry, July 2016, Elsevier

    Professor Dmitry G Eskin

  135. A model of cavitation for the treatment of a moving liquid metal volume

    Article • International Journal of Cast Metals Research, May 2016, Taylor & Francis

    Koulis Pericleous, Professor Dmitry G Eskin

  136. Fundamental studies on cavitation melt processing

    Article • IOP Conference Series Materials Science and Engineering, May 2016, Institute of Physics Publishing

    Koulis Pericleous, Professor Dmitry G Eskin

  137. Calibration and performance assessment of an innovative high-temperature cavitometer

    Article • Sensors and Actuators A Physical, April 2016, Elsevier

    Professor Dmitry G Eskin

  138. Ultrasonic processing of molten and solidifying aluminium alloys: overview and outlook

    Article • Materials Science and Technology, March 2016, Taylor & Francis

    Professor Dmitry G Eskin

  139. Characterisation of the ultrasonic acoustic spectrum and pressure field in aluminium melt with an advanced cavitometer

    Article • Journal of Materials Processing Technology, March 2016, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

  140. Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment

    Article • IOP Conference Series Materials Science and Engineering, March 2016, Institute of Physics Publishing

    Professor Dmitry G Eskin

  141. Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy

    Article • Journal of Crystal Growth, February 2016, Elsevier

    Professor Dmitry G Eskin

  142. Synchrotron radiographic studies of ultrasonic melt processing of metal matrix nano composites

    Article • Materials Letters, February 2016, Elsevier

    Professor Dmitry G Eskin

  143. Essential Readings in Light Metals

    Article • January 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

  144. Investigation of the factors influencing cavitation intensity during the ultrasonic treatment of molten aluminium

    Article • Materials & Design, January 2016, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

  145. A High-Order Acoustic Cavitation Model for the Treatment of a Moving Liquid Metal Volume

    Article • January 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

  146. Kinetics of Ultrasonic Degassing of Aluminum Alloys

    Article • January 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

  147. Comparison between low-order and high-order acoustic pressure solvers for bubbly media computations

    Article • Journal of Physics Conference Series, December 2015, Institute of Physics Publishing

    Koulis Pericleous, Professor Dmitry G Eskin

  148. Comparison of cavitation intensity in water and in molten aluminium using a high-temperature cavitometer

    Article • Journal of Physics Conference Series, December 2015, Institute of Physics Publishing

    Koulis Pericleous, Professor Dmitry G Eskin

  149. Effect of electroceramic particles on damping behaviour of aluminium hybrid composites produced by ultrasonic cavitation and mechanical stirring

    Article • Materials & Design, November 2015, Elsevier

    Professor Dmitry G Eskin

  150. In situ observation and analysis of ultrasonic capillary effect in molten aluminium

    Article • Ultrasonics Sonochemistry, November 2015, Elsevier

    Professor Dmitry G Eskin

  151. Dynamics of two interacting hydrogen bubbles in liquid aluminum under the influence of a strong acoustic field

    Article • Physical Review E, October 2015, American Physical Society (APS)

    Professor Dmitry G Eskin, Koulis Pericleous

  152. Effect of Input Power and Temperature on the Cavitation Intensity During the Ultrasonic Treatment of Molten Aluminium

    Article • Transactions of the Indian Institute of Metals, September 2015, Springer Science + Business Media

    Koulis Pericleous, Professor Dmitry G Eskin

  153. Effect of Zr additions and annealing temperature on electrical conductivity and hardness of hot rolled Al sheets

    Article • Transactions of Nonferrous Metals Society of China, September 2015, Elsevier

    Professor Dmitry G Eskin

  154. Ultrasonic Melt Processing: Achievements and Challenges

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Dmitry G Eskin

  155. Development of New Oxide Based Master Alloys and their Grain Refinement Potency in Aluminium Alloys

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Dmitry G Eskin

  156. Twin-Roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiC

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Karl Ulrich Kainer, Professor Dmitry G Eskin, Dr Chamini L Mendis

  157. Application of a plate sonotrode to ultrasonic degassing of aluminum melt: Acoustic measurements and feasibility study

    Article • Journal of Materials Processing Technology, August 2015, Elsevier

    Professor Dmitry G Eskin

  158. Foreword

    Article • Metallurgical and Materials Transactions A, May 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

  159. Development of Al-B-C Master Alloy Under External Fields

    Article • Metallurgical and Materials Transactions A, April 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

  160. The Application of External Fields to the Manufacturing of Novel Dense Composite Master Alloys and Aluminum-Based Nanocomposites

    Article • Metallurgical and Materials Transactions A, March 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

  161. Fabrication of a novel hybrid AlMg5/SiC/PLZT metal matrix composite produced by hot extrusion

    Article • Materials & Design (1980-2015), March 2015, Elsevier

    Professor Dmitry G Eskin

  162. Structure–property analysis of in-situ Al–MgAl2O4 metal matrix composites synthesized using ultrasonic cavitation

    Article • Materials Science and Engineering A, March 2015, Elsevier

    Professor Dmitry G Eskin

  163. The Physical-Mechanical and Electrical Properties of Cast Aluminum-Based Alloys Reinforced with Diamond Nanoparticles

    Article • Russian Physics Journal, March 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

  164. In Situ Synchrotron Radiography of Ultrasound Cavitation in a Molten Al-10Cu Alloy

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

  165. The Use of Alumina and Zirconia Nanopowders for Optimization of the Al-Based Light Alloys

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

  166. Application of External Fields to the Development of Aluminum-Based Nanocomposite and Master Alloys

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

  167. Structure and Casting Defects of Aluminum Billets Produced by Direct-Chill Casting

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

  168. A Model of Cavitation for the Treatment of a Moving Liquid Metal Volume

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

  169. Application of the "Full Cavitation Model" to the fundamental study of cavitation in liquid metal processing

    Article • IOP Conference Series Materials Science and Engineering, January 2015, Institute of Physics Publishing

    Professor Dmitry G Eskin, Koulis Pericleous

  170. Ultrasonic degassing of liquids

    Article • January 2015, Elsevier

    Professor Dmitry G Eskin

  171. Synthesis of Micro- and Nanoparticles of Metal Oxides and Their Application for Reinforcement of Al-Based Alloys

    Article • Advances in Materials Science and Engineering, January 2015, Hindawi Publishing Corporation

    Professor Dmitry G Eskin

  172. In Situ Synchrotron Radiography and Spectrum Analysis of Transient Cavitation Bubbles in Molten Aluminium Alloy

    Article • Physics Procedia, January 2015, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

  173. Evaluation of effect of ultrasonic degassing on components produced by low pressure die casting

    Article • International Journal of Cast Metals Research, December 2014, Maney Publishing

    Professor Dmitry G Eskin

  174. The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy

    Article • Journal of Crystal Growth, December 2014, Elsevier

    Professor Dmitry G Eskin

  175. Ultrasonic Treatment of Light Alloy Melts

    Article • August 2014, Taylor & Francis

    Professor Dmitry G Eskin

  176. Ultrasonic degassing of aluminium alloys: basic studies and practical implementation

    Article • Materials Science and Technology, June 2014, Taylor & Francis

    Professor Dmitry G Eskin

  177. Ultrasonic Melt Processing: Opportunities and Misconceptions

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Professor Dmitry G Eskin

  178. Grain Refinement Efficiency of a New Oxide-Containing Master Alloy for Aluminium Casting Alloys

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Professor Dmitry G Eskin

  179. Incubation pit analysis and calculation of the hydrodynamic impact pressure from the implosion of an acoustic cavitation bubble

    Article • Ultrasonics Sonochemistry, March 2014, Elsevier

    Professor Dmitry G Eskin

  180. Formation of Hot Tear Under Controlled Solidification Conditions

    Article • Metallurgical and Materials Transactions A, February 2014, Springer Science + Business Media

    Professor Dmitry G Eskin

  181. Mechanisms and Control of Macrosegregation in DC Casting

    Article • February 2014, Wiley

    Professor Dmitry G Eskin

  182. Nanoparticles Distribution and Mechanical Properties of Aluminum-Matrix Nano-Composites Treated with External Fields

    Article • February 2014, Wiley

    Professor Dmitry G Eskin

  183. Processing of Metal Matrix Composites under External Fields and Their Application as Grain Refiner

    Article • February 2014, Wiley

    Professor Dmitry G Eskin

  184. Mechanisms and Control of Macrosegregation in Dc Casting

    Article • January 2014, Springer Science + Business Media

    Professor Dmitry G Eskin

  185. Linear Contraction Behavior of Low-Carbon, Low-Alloy Steels During and After Solidification Using Real-Time Measurements

    Article • Metallurgical and Materials Transactions A, November 2013, Springer Science + Business Media

    Professor Dmitry G Eskin

  186. Experimental Description and Process Simulation of Direct Chill (DC) Casting of Aluminum Alloys

    Article • October 2013, Wiley

    Professor Dmitry G Eskin

  187. Direct-Chill Casting of Light Alloys

    Article • July 2013, Wiley

    Professor Dmitry G Eskin

  188. Effect of Ultrasonic Melt Treatment on Degassing and Structure of Aluminium Alloys

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor Dmitry G Eskin

  189. Study of Mechanical Properties of an LM24 Composite Alloy Reinforced with Cu-CNT Nanofillers, Processed Using Ultrasonic Cavitation

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor Dmitry G Eskin

  190. Relationship Between Solidification Microstructure and Hot Cracking Susceptibility for Continuous Casting of Low-Carbon and High-Strength Low-Alloyed Steels: A Phase-Field Study

    Article • Metallurgical and Materials Transactions A, April 2013, Springer Science + Business Media

    Professor Dmitry G Eskin

  191. Cold Cracking during Direct-Chill Casting

    Article • April 2013, Wiley

    Professor Dmitry G Eskin

  192. On the Mechanism of Grain Refinement by Ultrasonic Melt Treatment in the Presence of Transition Metals

    Article • April 2013, Wiley

    Professor Dmitry G Eskin

  193. Effect of Grain Refining on Defect Formation in DC Cast Al-Zn-Mg-Cu Alloy Billet

    Article • April 2013, Wiley

    Professor Dmitry G Eskin

  194. Essential Readings in Light Metals

    Article • March 2013, Wiley

    Professor Dmitry G Eskin

  195. Application of External Fields to Technology of Metal-Matrix Composite Materials

    Article • February 2013, Wiley

    Professor Dmitry G Eskin

  196. Kinetics of Ultrasonic Degassing of Aluminum Alloys

    Article • February 2013, Wiley

    Professor Dmitry G Eskin

  197. PIV quantification of the flow induced by an ultrasonic horn and numerical modeling of the flow and related processing times

    Article • Ultrasonics Sonochemistry, January 2013, Elsevier

    Professor Dmitry G Eskin

  198. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), October 2012, Carl Hanser Verlag

    Professor Dmitry G Eskin

  199. Role of Solute and Transition Metals in Grain Refinement of Aluminum Alloys under Ultrasonic Melt Treatment

    Article • September 2012, Wiley

    Professor Dmitry G Eskin

  200. Influence of Melt Feeding Scheme and Casting Parameters During Direct-Chill Casting on Microstructure of an AA7050 Billet

    Article • Metallurgical and Materials Transactions B, August 2012, Springer Science + Business Media

    Professor Dmitry G Eskin

  201. High-Temperature Mechanical Behavior and Fracture Analysis of a Low-Carbon Steel Related to Cracking

    Article • Metallurgical and Materials Transactions A, August 2012, Springer Science + Business Media

    Professor Dmitry G Eskin

  202. Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: experiments and computer modelling

    Article • IOP Conference Series Materials Science and Engineering, July 2012, Institute of Physics Publishing

    Professor Dmitry G Eskin

  203. Phase-field modelling of microstructure formation during the solidification of continuously cast low carbon and HSLA steels

    Article • IOP Conference Series Materials Science and Engineering, July 2012, Institute of Physics Publishing

    Professor Dmitry G Eskin

  204. Semi-quantitative predictions of hot tearing and cold cracking in aluminum DC casting using numerical process simulator

    Article • IOP Conference Series Materials Science and Engineering, July 2012, Institute of Physics Publishing

    Professor Dmitry G Eskin

  205. Formation of Microstructure in Al-Si Alloys under Ultrasonic Melt Treatment

    Article • May 2012, Wiley

    Professor Dmitry G Eskin

  206. Constitutive behaviour of an as-cast AA7050 alloy in the sub-solidus temperature range

    Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

    Professor Dmitry G Eskin

  207. Effect of V and N on the microstructure evolution during continuous casting of steel

    Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

    Professor Dmitry G Eskin

  208. Modeling of primary dendrite arm spacing variations in thin-slab casting of low carbon and low alloy steels

    Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

    Professor Dmitry G Eskin

  209. On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy

    Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

    Professor Dmitry G Eskin

  210. Structure and Defect Formation during DC Casting of Aluminium Alloys

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Professor Dmitry G Eskin

  211. International conference on aluminum alloys ICAA12

    Article • Metal Science and Heat Treatment, January 2012, Springer Science + Business Media

    Professor Dmitry G Eskin

  212. Recent trends in the science and technology of crystallization of aluminum alloys

    Article • Metal Science and Heat Treatment, January 2012, Springer Science + Business Media

    Professor Dmitry G Eskin

  213. Thermal expansion/contraction behavior of AA7050 alloy in the as-cast condition relevant to thermomechanical simulation of residual thermal stresses

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), October 2011, Carl Hanser Verlag

    Professor Dmitry G Eskin

  214. Cold Cracking during Direct-chill Casting

    Article • May 2011, Wiley

    Professor Dmitry G Eskin

  215. Contribution of forced centreline convection during direct chill casting of round billets to macrosegregation and structure of binary Al–Cu aluminium alloy

    Article • Materials Science and Technology, May 2011, Taylor & Francis

    Professor Dmitry G Eskin

  216. Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys

    Article • Journal of Materials Science, March 2011, Springer Science + Business Media

    Professor Dmitry G Eskin

  217. Cold cracking in DC-cast high strength aluminum alloy ingots: An intrinsic problem intensified by casting process parameters

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Professor Dmitry G Eskin

  218. On the mechanism of grain refinement in Al–Zr–Ti alloys

    Article • Journal of Alloys and Compounds, January 2011, Elsevier

    Professor Dmitry G Eskin

  219. Cold Cracking Development in AA7050 Direct Chill–Cast Billets under Various Casting Conditions

    Article • Metallurgical and Materials Transactions A, June 2010, Springer Science + Business Media

    Professor Dmitry G Eskin

  220. Application of a Criterion for Cold Cracking to Casting High Strength Aluminium Alloys

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Dmitry G Eskin

  221. Criteria of Grain Refinement Induced by Ultrasonic Melt Treatment of Aluminum Alloys Containing Zr and Ti

    Article • Metallurgical and Materials Transactions A, May 2010, Springer Science + Business Media

    Professor Dmitry G Eskin

  222. Factors affecting thermal contraction behavior of an AA7050 alloy

    Article • Materials Science and Engineering A, May 2010, Elsevier

    Professor Dmitry G Eskin

  223. Microstructural features of intergranular brittle fracture and cold cracking in high strength aluminum alloys

    Article • Materials Science and Engineering A, March 2010, Elsevier

    Professor Dmitry G Eskin

  224. Numerical Simulation of Residual Thermal Stresses in AA7050 Alloy during DC-Casting Using ALSIM5

    Article • Advanced Materials Research, January 2010, Trans Tech Publications

    Professor Dmitry G Eskin

  225. Cold-Cracking Assessment in AA7050 Billets during Direct-Chill Casting by Thermomechanical Simulation of Residual Thermal Stresses and Application of Fracture Mechanics

    Article • Metallurgical and Materials Transactions A, October 2009, Springer Science + Business Media

    Professor Dmitry G Eskin

  226. Different grain morphologies in grain-refined 7075 billet

    Article • Materials Science and Technology, October 2009, Taylor & Francis

    Professor Dmitry G Eskin

  227. Grain refinement of an Al–10% Mg alloy by intensive shearing in the liquid state

    Article • Journal of Alloys and Compounds, October 2009, Elsevier

    Professor Dmitry G Eskin

  228. Macrosegregation Mechanisms in Direct-Chill Casting of Aluminium Alloys

    Article • Materials Science Forum, October 2009, Trans Tech Publications

    Professor Dmitry G Eskin

  229. Numerical issues in modelling macrosegregation during DC casting of a multi‐component aluminium alloy

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, September 2009, Emerald

    Professor Dmitry G Eskin

  230. Solidification phenomena related to direct chill casting of aluminium alloys: fundamental studies and future challenges

    Article • Materials Technology, September 2009, Taylor & Francis

    Professor Dmitry G Eskin

  231. Effect of controlled forced convection on macrosegregation and structure in direct-chill casting of an aluminium alloy

    Article • International Journal of Cast Metals Research, August 2009, Maney Publishing

    Professor Dmitry G Eskin

  232. Influence of dendrite arrangement on coarsening during solidification of high-solute Al alloys

    Article • International Journal of Cast Metals Research, August 2009, Maney Publishing

    Professor Dmitry G Eskin

  233. Temperature effects in aluminium melts due to cavitation induced by high power ultrasound

    Article • International Journal of Cast Metals Research, August 2009, Maney Publishing

    Professor Dmitry G Eskin

  234. Fracture behavior and mechanical properties of high strength aluminum alloys in the as-cast condition

    Article • Materials Science and Engineering A, December 2008, Elsevier

    Professor Dmitry G Eskin

  235. Structural factors of dendritic segregation in aluminum alloys

    Article • Russian Journal of Non-Ferrous Metals, October 2008, Allerton Press

    Professor Dmitry G Eskin

  236. An efficient technique for describing a multi-component open system solidification path

    Article • Calphad, September 2008, Elsevier

    Professor Dmitry G Eskin

  237. In-Situ Analysis of Coarsening during Directional Solidification Experiments in High-Solute Aluminum Alloys

    Article • Metallurgical and Materials Transactions B, August 2008, Springer Science + Business Media

    Professor Dmitry G Eskin

  238. Physical Metallurgy of Direct Chill Casting of Aluminum Alloys

    Article • April 2008

    Professor Dmitry G Eskin

  239. Effect of different grain structures on centerline macrosegregation during direct-chill casting

    Article • Acta Materialia, April 2008, Elsevier

    Professor Dmitry G Eskin

  240. Scale Rules for Macrosegregation during Direct-Chill Casting of Aluminum Alloys

    Article • Metallurgical and Materials Transactions A, March 2008, Springer Science + Business Media

    Professor Dmitry G Eskin

  241. Macrosegregation in direct-chill casting of aluminium alloys

    Article • Progress in Materials Science, March 2008, Elsevier

    Professor Dmitry G Eskin

  242. Numerical Evaluation of Cyclone Application for Impurities Removal from Molten Aluminum

    Article • Metallurgical and Materials Transactions B, February 2008, Springer Science + Business Media

    Professor Dmitry G Eskin

  243. Solute transport and phase composition in an Al–Mg–Si alloy solidified under conditions of forced flow

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), January 2008, Carl Hanser Verlag

    Professor Dmitry G Eskin

  244. Effect of Grain Refinement on Structure Evolution, “Floating” Grains, and Centerline Macrosegregation in Direct-Chill Cast AA2024 Alloy Billets

    Article • Metallurgical and Materials Transactions A, December 2007, Springer Science + Business Media

    Professor Dmitry G Eskin

  245. Role of grain refining in hot cracking and macrosegregation in direct chill cast AA 7075 billets

    Article • Materials Science and Technology, November 2007, Taylor & Francis

    Professor Dmitry G Eskin

  246. Unsteady-State Solidification under Forced Flow Conditions

    Article • October 2007, CrossRef Test Account

    Professor Dmitry G Eskin

  247. Effect of Structure on Hot Tearing Properties of Aluminum Alloys

    Article • October 2007, CrossRef Test Account

    Professor Dmitry G Eskin

  248. 3D Microstructure Development during Unconstrained Solidification of Aluminum Alloys

    Article • October 2007, CrossRef Test Account

    Professor Dmitry G Eskin

  249. Experimental Study of Grain Growth in Aluminium Melts under the Influence of Ultrasonic Melt Treatment

    Article • October 2007, CrossRef Test Account

    Professor Dmitry G Eskin

  250. Unsteady-State Solidification under Forced Flow Conditions

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Dmitry G Eskin

  251. Effect of Structure on Hot Tearing Properties of Aluminum Alloys

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Dmitry G Eskin

  252. 3D Microstructure Development during Unconstrained Solidification of Aluminum Alloys

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Dmitry G Eskin

  253. Experimental Study of Grain Growth in Aluminium Melts under the Influence of Ultrasonic Melt Treatment

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Dmitry G Eskin

  254. In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy

    Article • Acta Materialia, August 2007, Elsevier

    Professor Dmitry G Eskin

  255. Solidification under Forced-Flow Conditions in a Shallow Cavity

    Article • Metallurgical and Materials Transactions A, June 2007, Springer Science + Business Media

    Professor Dmitry G Eskin

  256. Feathery grain growth during solidification under forced flow conditions

    Article • Acta Materialia, June 2007, Elsevier

    Professor Dmitry G Eskin

  257. A Quest for a New Hot Tearing Criterion

    Article • Metallurgical and Materials Transactions A, May 2007, Springer Science + Business Media

    Professor Dmitry G Eskin

  258. Two-dimensional modelling and experimental study on microsegregation during solidification of an Al–Cu binary alloy

    Article • Acta Materialia, March 2007, Elsevier

    Professor Dmitry G Eskin

  259. Modeling Macrosegregation during Direct-Chill Casting of Multicomponent Aluminum Alloys

    Article • Metallurgical and Materials Transactions A, January 2007, Springer Science + Business Media

    Professor Dmitry G Eskin

  260. Relationship between shrinkage-induced macrosegregation and the sump profile upon direct-chill casting

    Article • Scripta Materialia, October 2006, Elsevier

    Professor Dmitry G Eskin

  261. Effect of Al3Ni and Mg2Si Eutectic Phases on Casting Properties and Hardening of an Al-7% Zn-3% Mg Alloy

    Article • July 2006, CrossRef Test Account

    Professor Dmitry G Eskin

  262. Optimization of hardening of Al–Zr–Sc cast alloys

    Article • Journal of Materials Science, July 2006, Springer Science + Business Media

    Professor Dmitry G Eskin

  263. Thermal Contraction during Solidification of Aluminium Alloys

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Professor Dmitry G Eskin

  264. 3D Microstructure Reconstruction of Aluminium Alloys Quenched during Solidification

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Professor Dmitry G Eskin

  265. Thermal strain in the mushy zone for aluminum alloys

    Article • Metallurgical and Materials Transactions A, July 2006, Springer Science + Business Media

    Professor Dmitry G Eskin

  266. Role of Grain Refining in Macrosegregation upon Direct Chill Casting of AA 2024 Round Billet

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Professor Dmitry G Eskin

  267. Effects of Solidification Range on the Structure of Aluminium Alloys Obtained under Conditions of Constant Melt Flow

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Professor Dmitry G Eskin

  268. Effect of Al3Ni and Mg2Si Eutectic Phases on Casting Properties and Hardening of an Al-7% Zn-3% Mg Alloy

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Professor Dmitry G Eskin

  269. Experimental Study of Linear Shrinkage during Solidification of Binary and Commercial Aluminum Alloys

    Article • April 2006, Wiley

    Professor Dmitry G Eskin

  270. Thermal Contraction of AA5182 for Prediction of Ingot Distortions

    Article • March 2006, CrossRef Test Account

    Professor Dmitry G Eskin

  271. Constitutive Equation for Thermal Strain in the Mushy Zone during Solidification of Aluminium Alloys

    Article • March 2006, CrossRef Test Account

    Professor Dmitry G Eskin

  272. Structure observations related to hot tearing of Al–Cu billets produced by direct-chill casting

    Article • Materials Science and Engineering A, March 2006, Elsevier

    Professor Dmitry G Eskin

  273. Thermal Contraction of AA5182 for Prediction of Ingot Distortions

    Article • Key Engineering Materials, March 2006, Trans Tech Publications

    Professor Dmitry G Eskin

  274. Constitutive Equation for Thermal Strain in the Mushy Zone during Solidification of Aluminium Alloys

    Article • Materials Science Forum, March 2006, Trans Tech Publications

    Professor Dmitry G Eskin

  275. Effect of melt flow on macro- and microstructure evolution during solidification of an Al–4.5% Cu alloy

    Article • Materials Science and Engineering A, December 2005, Elsevier

    Professor Dmitry G Eskin

  276. The effect of ramping casting speed and casting temperature on temperature distribution and melt flow patterns in the sump of a DC cast billet

    Article • Materials Science and Engineering A, December 2005, Elsevier

    Professor Dmitry G Eskin

  277. Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys

    Article • Acta Materialia, October 2005, Elsevier

    Professor Dmitry G Eskin

  278. Experimental study of structure formation in binary Al–Cu alloys at different cooling rates

    Article • Materials Science and Engineering A, September 2005, Elsevier

    Professor Dmitry G Eskin

  279. Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy

    Article • Metallurgical and Materials Transactions A, July 2005, Springer Science + Business Media

    Professor Dmitry G Eskin

  280. Alloys with Nickel

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  281. Alloys with Lithium

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  282. Alloys with Transition Metals

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  283. Alloys of the Al–Fe–Mn–Si System

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  284. Alloys of the Al–Mg–Mn–Si–Fe System

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  285. Alloys of the Al–Cu–Mn–(Mg, Fe, Si) System

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  286. Alloys with a High Content of Zinc

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  287. Composite Materials with SiC, Al2O3, and SiO2

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  288. Alloys of the Al–Mg–Si–Fe System

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  289. Alloys of the Al–Cu–Si–(Mg, Fe) System

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  290. Multicomponent Phase Diagrams

    Article • January 2005, Elsevier

    Professor Dmitry G Eskin

  291. Structure formation and macrosegregation under different process conditions during DC casting

    Article • Materials Science and Engineering A, October 2004, Elsevier

    Professor Dmitry G Eskin

  292. Development of thermal strain in the coherent mushy zone during solidification of aluminum alloys

    Article • Metallurgical and Materials Transactions A, September 2004, Springer Science + Business Media

    Professor Dmitry G Eskin

  293. Some control mechanisms of spatial solidification in light alloys

    Article • Zeitschrift für Metallkunde, August 2004, Carl Hanser Verlag

    Professor Dmitry G Eskin

  294. Mechanical properties in the semi-solid state and hot tearing of aluminium alloys

    Article • Progress in Materials Science, January 2004, Elsevier

    Professor Dmitry G Eskin

  295. Improving the properties of cold-rolled Al–6%Ni sheets by alloying and heat treatment

    Article • Scripta Materialia, January 2004, Elsevier

    Professor Dmitry G Eskin

  296. First stages of grain coarsening in semi-solid Al?Cu alloys

    Article • Scripta Materialia, October 2003, Elsevier

    Professor Dmitry G Eskin

  297. Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt

    Article • Ultrasonics Sonochemistry, July 2003, Elsevier

    Professor Dmitry G Eskin

  298. Article • Journal of Materials Science, January 2003, Springer Science + Business Media

    Professor Dmitry G Eskin

  299. Effects of Ultrasonic (Cavitation) Melt Processing on the Structure Refinement and Property Improvement of Cast and Worked Aluminum Alloys

    Article • Materials Science Forum, July 2002, Trans Tech Publications

    Professor Dmitry G Eskin

  300. Hardening and Precipitation in the Al-Cu-Mg-Si Alloying System

    Article • Materials Science Forum, July 2002, Trans Tech Publications

    Professor Dmitry G Eskin

  301. The Al-Cu-Fe-Mg-Si Phase Diagram in the Range of Al-Cu Alloys

    Article • Materials Science Forum, July 2002, Trans Tech Publications

    Professor Dmitry G Eskin

  302. Primary Solidification in Aluminum Alloys under Melt Overheating

    Article • Materials Science Forum, May 2000, Trans Tech Publications

    Professor Dmitry G Eskin

  303. Casting alloys of the Al–Ce–Ni system: microstructural approach to alloy design

    Article • Materials Science and Engineering A, November 1999, Elsevier

    Professor Dmitry G Eskin

  304. Article • Journal of Materials Science, January 1999, Springer Science + Business Media

    Professor Dmitry G Eskin

  305. Precipitation hardening in ternary alloys of the AlScCu and AlScSi systems

    Article • Acta Metallurgica et Materialia, July 1994, Elsevier

    Professor Dmitry G Eskin

  306. In Search of the Prediction of Hot Cracking in Aluminium Alloys

    Article • Springer Science + Business Media

    Professor Dmitry G Eskin

  307. 10.4028/0-87849-408-1.1681

    Article • CrossRef Test Account

    Professor Dmitry G Eskin

  308. 10.4028/0-87849-408-1.1707

    Article • CrossRef Test Account

    Professor Dmitry G Eskin

  309. 10.4028/0-87849-408-1.1789

    Article • CrossRef Test Account

    Professor Dmitry G Eskin

  310. 10.4028/0-87849-408-1.1841

    Article • CrossRef Test Account

    Professor Dmitry G Eskin