All Stories

  1. Corrosion behavior assessment of an Al-Cu alloy manufactured via laser powder bed fusion

    Article • Corrosion Science, February 2024, Elsevier

    Professor Marina Cabrini

  2. On the selective corrosion mechanism of LPBF-produced AlSi10Mg: Potentiostatic polarization effects

    Article • Electrochimica Acta, December 2023, Elsevier

    Professor Marina Cabrini

  3. Effect of Chemical Treatment on the Corrosion Behavior of Mg-2Zn-1Mn (ZM21) Magnesium Alloy

    Article • Journal of Materials Engineering and Performance, June 2023, Springer Science + Business Media

    Professor Marina Cabrini

  4. A comparative analysis between material extrusion and other additive manufacturing techniques: Defects, microstructure and corrosion behavior in nickel alloy 625

    Article • Materials & Design, January 2023, Elsevier

    Professor Marina Cabrini

  5. Influence of surface finishing and heat treatments on the corrosion resistance of LPBF-produced Ti-6Al-4V alloy for biomedical applications

    Article • Journal of Materials Processing Technology, October 2022, Elsevier

    Professor Marina Cabrini

  6. Chemical, Electrochemical, and Surface Morphological Studies of the Corrosion Behavior of the AZ31 Alloy in Simulated Body Fluid: Effect of NaOH and H2O2Surface Pretreatments on the Corrosion Resistance Property

    Article • ACS Omega, July 2022, American Chemical Society (ACS)

    Professor Marina Cabrini

  7. Assessment of the corrosion behaviour of untreated and chemically treated pure magnesium in simulated body fluid

    Article • Journal of Adhesion Science and Technology, July 2022, Taylor & Francis

    Professor Marina Cabrini

  8. Durability of Mortars Manufactured with Low-Carbon Binders Exposed to Calcium Chloride-Based De-Icing Salts

    Article • Key Engineering Materials, May 2022, Trans Tech Publications

    Professor Marina Cabrini

  9. The Improvement of Durability of Reinforced Concretes for Sustainable Structures: A Review on Different Approaches

    Article • Materials, April 2022, MDPI AG

    Professor Marina Cabrini

  10. Understanding the Corrosion Behavior of the AZ91D Alloy in Simulated Body Fluid through the Use of Dynamic EIS

    Article • ACS Omega, March 2022, American Chemical Society (ACS)

    Professor Marina Cabrini

  11. Corrosion Activity of Carbon Steel B450C and Low Chromium Ferritic Stainless Steel 430 in Chloride-Containing Cement Extract Solution

    Article • Metals, January 2022, MDPI AG

    Professor Marina Cabrini, Dr Sebastian Feliu Jr

  12. Stress Corrosion Cracking of Additively Manufactured Alloy 625

    Article • Materials, October 2021, MDPI AG

    Professor Marina Cabrini

  13. Effect of Heat Treatment on Microstructure and Selective Corrosion of LPBF-AlSi10Mg by Means of SKPFM and Exo-Electron Emission

    Article • Materials, September 2021, MDPI AG

    Professor Marina Cabrini

  14. Corrosion Activity of Carbon Steel B450C and Low Chromium Ferritic Stainless Steel 430 in Cement Extract Solution

    Article • Buildings, May 2021, MDPI AG

    Professor Marina Cabrini, Dr Sebastian Feliu Jr

  15. Stress Corrosion Cracking of Friction Stir-Welded AA-2024 T3 Alloy

    Article • Materials, June 2020, MDPI AG

    Professor Marina Cabrini

  16. Effect of Load on the Corrosion Behavior of Friction Stir Welded AA 7075-T6 Aluminum Alloy

    Article • Materials, June 2020, MDPI AG

    Professor Marina Cabrini

  17. Inhibition Effect of Tartrate Ions on the Localized Corrosion of Steel in Pore Solution at Different Chloride Concentrations

    Article • Buildings, June 2020, MDPI AG

    Professor Marina Cabrini

  18. Hydrogen Permeation in X65 Steel under Cyclic Loading

    Article • Materials, May 2020, MDPI AG

    Professor Marina Cabrini

  19. Fatigue-Corrosion of High Strength Steels in Synthetic Seawater under Cathodic Protection

    Article • Key Engineering Materials, May 2020, Trans Tech Publications

    Professor Marina Cabrini

  20. Stress enhanced intergranular corrosion of friction stir welded AA2024-T3

    Article • Engineering Failure Analysis, April 2020, Elsevier

    Professor Marina Cabrini

  21. Hydrogen Embrittlement Evaluation of Micro Alloyed Steels by Means of J-Integral Curve

    Article • Materials, June 2019, MDPI AG

    Professor Marina Cabrini

  22. Microstructure and Selective Corrosion of Alloy 625 Obtained by Means of Laser Powder Bed Fusion

    Article • Materials, May 2019, MDPI AG

    Professor Marina Cabrini

  23. Hydrogen diffusion in low alloy steels under cyclic loading

    Article • Corrosion Reviews, May 2019, De Gruyter

    Professor Marina Cabrini

  24. Corrosion behavior of AlSi10Mg alloy produced by laser powder bed fusion under chloride exposure

    Article • Corrosion Science, May 2019, Elsevier

    Professor Marina Cabrini

  25. Statistical approach for electrochemical evaluation of the effect of heat treatments on the corrosion resistance of AlSi10Mg alloy by laser powder bed fusion

    Article • Electrochimica Acta, May 2019, Elsevier

    Professor Marina Cabrini

  26. Hydrogen Embrittlement and Diffusion in High Strength Low Alloyed Steels with Different Microstructures

    Article • Insight - Material Science, March 2019, PiscoMed Publishing Pte Ltd

    Professor Marina Cabrini

  27. Evaluation of Corrosion Resistance of Alloy 625 Obtained by Laser Powder Bed Fusion

    Article • Journal of The Electrochemical Society, January 2019, The Electrochemical Society

    Professor Marina Cabrini

  28. Corrosion resistance in chloride solution of the AlSi10Mg alloy obtained by means of LPBF

    Article • Surface and Interface Analysis, December 2018, Wiley

    Professor Marina Cabrini

  29. The influence of process parameters on mechanical properties and corrosion behavior of friction stir welded aluminum joints

    Article • Journal of Manufacturing Processes, October 2018, Elsevier

    Professor Marina Cabrini

  30. Binders alternative to Portland cement and waste management for sustainable construction – Part 2

    Article • Journal of Applied Biomaterials & Functional Materials, July 2018, SAGE Publications

    PROF. ING COPPOLA LUIGI, Professor Marina Cabrini

  31. Binders alternative to Portland cement and waste management for sustainable construction—part 1

    Article • Journal of Applied Biomaterials & Functional Materials, July 2018, SAGE Publications

    Professor Marina Cabrini

  32. Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion

    Article • Materials, June 2018, MDPI AG

    Professor Marina Cabrini

  33. Effects of thiosulphates and sulphite ions on steel corrosion

    Article • Corrosion Science, May 2018, Elsevier

    Professor Marina Cabrini

  34. Effect of Hot Mill Scale on Hydrogen Embrittlement of High Strength Steels for Pre-Stressed Concrete Structures

    Article • Metals, March 2018, MDPI AG

    Professor Marina Cabrini

  35. Materials selection for dew-point corrosion in geothermal fluids containing acid chloride

    Article • Geothermics, September 2017, Elsevier

    Professor Marina Cabrini

  36. Study of the Corrosion Resistance of Austenitic Stainless Steels during Conversion of Waste to Biofuel

    Article • Materials, March 2017, MDPI AG

    Professor Marina Cabrini

  37. Environmentally assisted cracking of pipeline steels in CO2 containing environment at near-neutral pH

    Article • Corrosion Reviews, January 2017, De Gruyter

    Professor Marina Cabrini

  38. Electrochemical investigation of corrosion and repassivation of structural aluminum alloys under permanent load in bending

    Article • Corrosion Reviews, January 2017, De Gruyter

    Monica Trueba, Professor Marina Cabrini

  39. The influence of process parameters on mechanical properties and corrosion behaviour of friction stir welded aluminum joints

    Article • Procedia Engineering, January 2017, Elsevier

    Professor Marina Cabrini

  40. The Effects of Process Parameters on Mechanical Properties and Corrosion Behavior in Friction Stir Welding of Aluminum Alloys

    Article • Procedia Engineering, January 2017, Elsevier

    Professor Marina Cabrini

  41. Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy

    Article • Electrochimica Acta, July 2016, Elsevier

    Professor Marina Cabrini

  42. Steel damaging in flowing mortar

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, May 2016, Taylor & Francis

    Professor Marina Cabrini

  43. Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering

    Article • Journal of Materials Processing Technology, May 2016, Elsevier

    Professor Marina Cabrini

  44. Corrosion resistance of direct metal laser sintering AlSiMg alloy

    Article • Surface and Interface Analysis, March 2016, Wiley

    Professor Marina Cabrini

  45. Pipeline Steels: Hydrogen Diffusion and Environmentally-Assisted Cracking

    Article • January 2016, Taylor & Francis

    Professor Marina Cabrini

  46. Corrosion Behavior of Carbon Steels in CCTS Environment

    Article • International Journal of Corrosion, January 2016, Hindawi Publishing Corporation

    Professor Marina Cabrini

  47. Environmentally assisted cracking and hydrogen diffusion in traditional and high-strength pipeline steels

    Article • Corrosion Reviews, January 2015, De Gruyter

    Professor Marina Cabrini

  48. Effect of Organic Inhibitors on Chloride Corrosion of Steel Rebars in Alkaline Pore Solution

    Article • Journal of Chemistry, January 2015, Hindawi Publishing Corporation

    Professor Marina Cabrini

  49. Cyclic voltammetry evaluation of inhibitors for localised corrosion in alkaline solutions

    Article • Electrochimica Acta, April 2014, Elsevier

    Professor Marina Cabrini

  50. Hydrogen embrittlement behavior of HSLA line pipe steel under cathodic protection

    Article • Corrosion Reviews, January 2011, De Gruyter

    Professor Marina Cabrini

  51. Evaluation of the corrosion inhibition of salts of organic acids in alkaline solutions and chloride contaminated concrete

    Article • Werkstoffe und Korrosion, September 2010, Wiley

    PROF. ING COPPOLA LUIGI, Professor Marina Cabrini

  52. Mechanical Characterization of Hydroxiapatite Micro/Macro-Porous Ceramics Obtained by Means of Innovative Gel-Casting Process

    Article • Key Engineering Materials, October 2009, Trans Tech Publications

    Professor Marina Cabrini

  53. Evaluation of the resistance to hydrogen embrittlement by the slow bending test

    Article • January 2008, Elsevier

    Professor Marina Cabrini

  54. Effect of microstructure on the hydrogen-embrittlement behaviour of HSLA steels under cathodic protection

    Article • January 2008, Elsevier

    Professor Marina Cabrini

  55. Hydrogen-embrittlement resistance of X100 steels for long-distance high-pressure pipelines

    Article • January 2008, Elsevier

    Professor Marina Cabrini

  56. Photoelectrochemical visualization in real-time of hydrogen distribution in plastic regions of low-carbon steel

    Article • Corrosion Science, January 1999, Elsevier

    Professor Marina Cabrini

  57. Effect of different surface finishing and of hydroxyapatite coatings on passive and corrosion current of Ti6Al4V alloy in simulated physiological solution

    Article • Biomaterials, June 1997, Elsevier

    Professor Marina Cabrini

  58. Increasing of the corrosion resistance of the Ti6Al4V alloy by high thickness anodic oxidation

    Article • Journal of Materials Science Materials in Medicine, November 1992, Springer Science + Business Media

    Professor Marina Cabrini

  59. Hydrogen Diffusion and EAC of Pipeline Steels Under Cathodic Protection

    Article • Springer Science + Business Media

    Professor Marina Cabrini