All Stories

  1. Nanoscale oxide-mediated grain-boundary stabilization enables simultaneous strength and ductility in an additively manufactured high-entropy alloy

    Article • Materials Science and Engineering A, August 2026, Elsevier

    Dr. Mainak Saha

  2. Strain‐Induced Martensitic Transformation During Uniaxial Tension and Low Cycle Fatigue in a 0.4% C Direct Quenched and Partitioned Martensitic Steel

    Article • Advanced Engineering Materials, July 2026, Wiley

    Dr. Mainak Saha

  3. Metal-based conducive nano-inks: A review of synthesis and characterisation techniques

    Article • April 2026, American Chemical Society (ACS)

    Dr. Mainak Saha

  4. Effect of YB4 Reinforcement on the Microstructural Evolution and Mechanical Behaviour of AISI 420 Composites Produced by Vacuum Induction Melting

    Article • March 2026, Open Engineering Inc

    Dr. Mainak Saha

  5. Effect of YB4 Reinforcement on the Microstructural Evolution and Mechanical Behaviour of AISI 420 Composites Produced by Vacuum Induction Melting

    Article • Powders, March 2026, MDPI AG

    Dr. Mainak Saha

  6. Potential and perspectives on additive manufacturing of high-entropy alloys for ballistic impact applications

    Article • February 2026, Open Engineering Inc

    Dr. Mainak Saha

  7. Potential and perspectives on additive manufacturing of high-entropy alloys for ballistic impact applications

    Article • February 2026, Wiley

    Dr. Mainak Saha

  8. <p>Potential and Perspectives on Additive Manufacturing of High-Entropy Alloys for Ballistic Impact Applications</p>

    Article • January 2026, Elsevier

    Dr. Mainak Saha

  9. Mapping Trace Hydrogen by 3D Atom Probe: Optimizing Experimental Workflows

    Article • MATERIALS TRANSACTIONS, January 2026, Japan Institute of Metals

    Dr. Mainak Saha

  10. On the Solidification and Phase Stability of Re-Bearing High-Entropy Superalloys with Hierarchical Microstructures

    Article • Metals, July 2025, MDPI AG

    Dr. Mainak Saha

  11. Strain partitioning-induced anisotropy in thermomechanically processed magnesium alloys comprised of earth-abundant elements

    Article • Scripta Materialia, June 2025, Elsevier

    Dr. Mainak Saha

  12. Segregation-induced microstructural refinement in a FeMnAlC-TiB metal matrix composite by laser powder bed fusion

    Article • Progress in Additive Manufacturing, May 2025, Springer Science + Business Media

    Dr. Mainak Saha

  13. Ordered B2 phase in a disordered FCC matrix: Current state of research on the development of low-density B2strengthened Fe-Mn-Al-Ni-C steels

    Article • May 2025, Wiley

    Dr. Mainak Saha

  14. Additive manufacturing of ceramics: Present status and future perspectives

    Article • May 2025, Wiley

    Dr. Mainak Saha

  15. -TiAl alloy: Revisiting tensile creep deformation behaviour and creep life at 832 °C

    Article • April 2025, Wiley

    Dr. Mainak Saha

  16. A brief discussion on High-entropy alloys vs Compositionally Complex alloys

    Article • April 2025, Wiley

    Dr. Mainak Saha

  17. Additive manufacturing and characterisation of biomedical materials

    Article • April 2025, Wiley

    Dr. Mainak Saha

  18. Fly ash composites: A review

    Article • April 2025, Wiley

    Dr. Mainak Saha

  19. Grain boundary segregation in steels: Towards engineering the design of internal interfaces

    Article • April 2025, Wiley

    Dr. Mainak Saha

  20. New frontiers in characterising ZrB2-MoSi2 ultra-high temperature ceramics

    Article • April 2025, Wiley

    Dr. Mainak Saha

  21. Ordered B2 phase in a disordered FCC matrix: Current state of research on the development of low-density B2-strengthened Fe-Mn-Al-Ni-C steels

    Article • November 2024, American Chemical Society (ACS)

    Dr. Mainak Saha

  22. Advancing the hydrogen tolerance of ultrastrong aluminum alloys via nanoprecipitate modification

    Article • Corrosion Science, November 2024, Elsevier

    Dr. Mainak Saha

  23. Detection of Hydrogen by Atom Probe Tomography: Hydrogen embrittlement analysis

    Article • Microscopy and Microanalysis, September 2024, Oxford University Press (OUP)

    Professor Milos B. Djukic, Dr. Mainak Saha, Dr. Yi-Sheng Chen

  24. Additive Manufacturing of High Entropy Alloys: Trends, Challenges and Future Perspectives

    Article • April 2024, Open Engineering Inc

    Dr. Mainak Saha

  25. Combinatorial Alloy Design: Renaissance in the Accelerated Development of High-Entropy Alloys

    Article • Transactions of Indian National Academy of Engineering, April 2024, Springer Science + Business Media

    Dr. Mainak Saha

  26. On the three-dimensional atomic scale characterisation towards understanding the sequence of nano-scale B2 phase evolution in Ni-alloyed Fe-Mn-Al-C low-density steel

    Article • March 2024, ScienceOpen

    Dr. Mainak Saha

  27. 3 Additive manufacturing of compositionally complex alloys: trends, challenges, and future perspectives

    Article • January 2024, De Gruyter

    Dr. Mainak Saha

  28. Additive manufacturing of High Entropy Alloys: Trends, challenges and future perspectives

    Article • October 2023, MDPI AG

    Dr. Mainak Saha

  29. On the pressureless sintering of ZrB2-20 vol% MoSi2 composites

    Article • April 2023, Cambridge University Press

    Dr. Mainak Saha

  30. Densification and characterization of pressureless sintered ZrB2-20 vol% MoSi2 ultra high temperature ceramic composites

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  31. Additive manufacturing and characterisation of biomedical materials

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  32. Fly ash composites: A review

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  33. Grain boundary segregation in steels: Towards engineering the design of internal interfaces

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  34. ɤ-TiAl alloy: revisiting tensile creep deformation behaviour and creep life at 832 °C

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  35. Metal-based conducive nano-inks: A review of synthesis and characterisation techniques

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  36. On the advanced microstructural characterisation of additively manufactured alumina-zirconia based eutectic ceramics:

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  37. 3D printing of nanoceramics: Present status and future perspectives

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  38. New frontiers in characterising ZrB2-MoSi2 ultra-high temperature ceramics

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  39. Surface engineering of nanomaterials: Processing and applications

    Article • March 2023, Open Engineering Inc

    Dr. Mainak Saha

  40. On the advanced microstructural characterisation of additively manufactured alumina-zirconia based eutectic ceramics: Overview and outlook

    Article • March 2023, Authorea, Inc.

    Dr. Mainak Saha

  41. Metal-based conducive nano-inks: A review of synthesis and characterisation techniques

    Article • March 2023, Authorea, Inc.

    Dr. Mainak Saha

  42. 3D printing of nanoceramics for biomedical applications

    Article • January 2023, Elsevier

    Dr. Mainak Saha

  43. Microstructure evolution and phase analysis of Sm60Ni40 alloy

    Article • Journal of Magnetism and Magnetic Materials, January 2023, Elsevier

    Dr. Mainak Saha

  44. 3D Printing of Nanoceramics: Present Status and Future Perspectives

    Article • SSRN Electronic Journal, January 2023, Elsevier

    Dr. Mainak Saha

  45. Metal-based conducive nano-inks: synthesis and characterization techniques

    Article • January 2023, Elsevier

    Dr. Mainak Saha

  46. New Frontiers in Characterising ZrB2-MoSi2 Ultra-High Temperature Ceramics

    Article • January 2023, Elsevier

    Dr. Mainak Saha

  47. On the Advanced Microstructural Characterisation of Additively Manufactured Alumina-Zirconia Based Eutectic Ceramics: Overview and Outlook

    Article • January 2023, Elsevier

    Dr. Mainak Saha

  48. On the advanced microstructural characterisation of additively manufactured alumina-zirconia based eutectic ceramics: Overview and outlook

    Article • December 2022, American Chemical Society (ACS)

    Dr. Mainak Saha

  49. An insight into cyclic oxidation behaviour of ZrB2 -20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100°C and 1300°C

    Article • December 2022, Authorea, Inc.

    Dr. Mainak Saha

  50. An Insight Into Cyclic Oxidation behavior of ZrB2-20 Vol.% MoSi2 Based Ultrahigh Temperature Ceramic Matrix Composite

    Article • November 2022, Taylor & Francis

    Dr. Mainak Saha

  51. 3D printing of nanoceramics: Present status and future perspectives

    Article • October 2022, Authorea, Inc.

    Dr. Mainak Saha

  52. Metal-based conducive nano-inks: A review of synthesis and characterisation techniques

    Article • October 2022, Authorea, Inc.

    Dr. Mainak Saha

  53. Surface Engineering

    Article • October 2022, Taylor & Francis

    Dr. Mainak Saha

  54. 3D printing of nanoceramics: Present status and future perspectives

    Article • September 2022, Authorea, Inc.

    Dr. Mainak Saha

  55. Additive manufacturing of ceramics: Present status and future perspectives

    Article • September 2022, Authorea, Inc.

    Dr. Mainak Saha

  56. CARBON-BASED NANOCOMPOSITES: PROCESSING, ELECTRONIC PROPERTIES AND APPLICATIONS

    Article • September 2022, Authorea, Inc.

    Dr. Mainak Saha

  57. Surface Engineering of Nanomaterials: Processing and Applications

    Article • September 2022, MDPI AG

    Dr. Mainak Saha

  58. Metal-Based Conducive Nano-Inks: A Review of Synthesis and Characterisation Techniques

    Article • September 2022, MDPI AG

    Dr. Mainak Saha

  59. Surface engineering of nanomaterials

    Article • September 2022, Authorea, Inc.

    Dr. Mainak Saha

  60. Metal-based conducive nano-inks: A review of synthesis and characterisation techniques

    Article • August 2022, American Chemical Society (ACS)

    Dr. Mainak Saha

  61. Revealing the Localization of NiAl-Type Nano-Scale B2 Precipitates Within the BCC Phase of Ni Alloyed Low-Density FeMnAlC Steel

    Article • JOM, June 2022, Springer Science + Business Media

    Dr. Mainak Saha

  62. Microstructural Evolution of an Intermetallic Phase in a Complex-Concentrated Alloy: A Brief Case Study

    Article • May 2022, MDPI AG

    Dr. Mainak Saha

  63. On the electronic properties of graphene-based nanocomposites

    Article • May 2022, Open Engineering Inc

    Dr. Mainak Saha

  64. On the correlative microscopy analyses of nano-twinned domains in 2 mol% zirconia alloyed yttrium tantalate thermal barrier material

    Article • Scripta Materialia, April 2022, Elsevier

    Dr. Mainak Saha

  65. Additive Manufacturing and Characterisation of Biomedical Materials

    Article • March 2022, Taylor & Francis

    Dr. Mainak Saha

  66. Advanced Materials for Biomechanical Applications

    Article • March 2022, Taylor & Francis

    Dr. Mainak Saha

  67. Cyclic oxidation behaviour of ZrB2-20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100°C and 1300°C

    Article • February 2022, Research Square

    Dr. Mainak Saha

  68. Fly Ash Composites: A Review

    Article • February 2022, MDPI AG

    Dr. Mainak Saha

  69. Grain Boundary Segregation In Steels: Towards Engineering The Design Of Internal Interfaces<strong> </strong>

    Article • February 2022, MDPI AG

    Dr. Mainak Saha

  70. Additive Manufacturing and Characterisation of Biomedical Materials

    Article • SSRN Electronic Journal, January 2022, Elsevier

    Dr. Mainak Saha

  71. Cyclic Oxidation Behaviour of ZrB2 -20 vol.%MoSi2 Based Ultra-High Temperature Ceramic Matrix Composite Between 1100°C and 1300°C

    Article • SSRN Electronic Journal, January 2022, Elsevier

    Dr. Mainak Saha

  72. Metal-Based Conducive Nano-Inks: A Review of Synthesis and Characterisation Techniques

    Article • SSRN Electronic Journal, January 2022, Elsevier

    Dr. Mainak Saha

  73. Analysis of Structural Differences of Ag Nanoparticles Generated Using Thermal and E-Beam Process Based on SEM Image

    Article • January 2022, Elsevier

    Dr. Mainak Saha

  74. Densification and Characterization of Pressureless Sintered ZrB2-20 Vol% MoSi2 Ultra High Temperature Ceramic Composites

    Article • January 2022, Elsevier

    Dr. Mainak Saha

  75. Fly Ash Composites: A Review

    Article • January 2022, Elsevier

    Dr. Mainak Saha

  76. Grain boundary segregation in steels: Towards engineering the design of internal interfaces

    Article • January 2022, Elsevier

    Dr. Mainak Saha

  77. MicroArt

    Article • Metallography Microstructure and Analysis, December 2021, Springer Science + Business Media

    Dr. Mainak Saha

  78. Cyclic oxidation behaviour of ZrB2 -20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100°C and 1300°C

    Article • October 2021, Open Engineering Inc

    Dr. Mainak Saha

  79. Analysis of structural differences of Ag Nanoparticles generated using Thermal and E-beam process based on SEM imaging

    Article • October 2021, Open Engineering Inc

    Dr. Mainak Saha

  80. Reduction in Charge Requirements of Hismeltiron-Making Process in Indian Context

    Article • October 2021, Open Engineering Inc

    Dr. Mainak Saha

  81. Deciphering the role of Al2O3 formed during isothermal oxidation in a dual-phase AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

    Article • October 2021, Open Engineering Inc

    Dr. Mainak Saha

  82. Analysis of structural differences of Ag Nanoparticles generated using Thermal and E-beam process based on SEM image

    Article • October 2021, Research Square

    Dr. Mainak Saha

  83. A Brief Discussion on High-Entropy Alloys vs Compositionally Complex Alloys

    Article • October 2021, MDPI AG

    Dr. Mainak Saha

  84. A brief discussion on High-entropy alloys vs Compositionally Complex alloys

    Article • October 2021, Open Engineering Inc

    Dr. Mainak Saha

  85. Additive manufacturing of ceramics: Present status and future perspectives

    Article • September 2021, Open Engineering Inc

    Dr. Mainak Saha

  86. On the Tensile Creep Deformation Behaviour of Wrought Single-phase γ-TiAl

    Article • September 2021, MDPI AG

    Dr. Mainak Saha

  87. On the tensile creep deformation behaviour of wrought single-phase γ-TiAl

    Article • September 2021, Research Square

    Dr. Mainak Saha

  88. CARBON-BASED NANOCOMPOSITES: PROCESSING, ELECTRONIC PROPERTIES AND APPLICATIONS

    Article • September 2021, Open Engineering Inc

    Dr. Mainak Saha

  89. Additive manufacturing of ceramics and cermets: present status and future perspectives

    Article • September 2021, Open Engineering Inc

    Dr. Mainak Saha

  90. ɤ-TiAl alloy: On the tensile creep deformation behaviour and creep life at 832 °C

    Article • September 2021, Open Engineering Inc

    Dr. Mainak Saha

  91. ɤ-TiAl alloy: Tensile creep deformation behaviour and creep life at 832 °C

    Article • September 2021, Research Square

    Dr. Mainak Saha

  92. ɤ-TiAl Alloy: Tensile Creep Deformation Behaviour and Creep Life at 832<sup> °</sup>C

    Article • September 2021, MDPI AG

    Dr. Mainak Saha

  93. A brief discussion on the tensile creep deformation behaviour of wrought single-phase γ-TiAl

    Article • September 2021, Open Engineering Inc

    Dr. Mainak Saha

  94. Additive manufacturing of ceramics and cermets: present status and future perspectives

    Article • Sadhana, August 2021, Springer Science + Business Media

    Dr. Mainak Saha

  95. ɤ-TiAl alloy: revisiting tensile creep deformation behaviour and creep life at 832 °C

    Article • Advances in Materials and Processing Technologies, July 2021, Taylor & Francis

    Dr. Mainak Saha

  96. A brief discussion on the tensile creep deformation behaviour of wrought single-phase γ-TiAl

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. Mainak Saha

  97. Carbon Nanomaterial Electronics: Devices and Applications

    Article • January 2021, Springer Science + Business Media

    Dr. Mainak Saha

  98. Carbon-Based Nanocomposites: Processing, Electronic Properties and Applications

    Article • January 2021, Springer Science + Business Media

    Dr. Mainak Saha

  99. Carbon-Based Nanocomposites: Processing, Electronic Properties, and Applications

    Article • SSRN Electronic Journal, January 2020, Elsevier

    Dr. Mainak Saha

  100. Understanding the oxidation behavior of a ZrB2–MoSi2 composite at ultra-high temperatures

    Article • Acta Materialia, June 2018, Elsevier

    Dr. Mainak Saha

  101. Low Cost Synthesis of Single Walled Carbon Nanotubes from Coal Tar Using Arc Discharge Method

    Article • IOSR Journal of Applied Physics, March 2017, IOSR Journals

    Dr. Mainak Saha