All Stories

  1. The Effect of Kappa Phases on Tribocorrosion Behaviour of Nickel Aluminum Bronze (NAB) and Manganese Aluminum Bronze (MAB)
  2. Comportamiento en cavitación en agua de mar de uniones soldadas de bronces de elevada aleación
  3. Efecto de la carga en el comportamiento tribológico de los aceros inoxidables hiperdúplex
  4. Comparación de las propiedades tribológicas de recubrimientos de Zn y Zn-Al obtenidos por metalización
  5. Preparación metalográfica sostenible: Casos particulares en un bronce al níquel y aluminio (NAB), un bronce al manganeso y aluminio, (MAB) y un latón dúplex
  6. Effects of heat treatment on the microstructure and corrosion behavior of manganese aluminum bronzes
  7. Cavitation Typology in the Marine Environment in Copper-Based Alloys: Particular Case of Copper, Brass, NAB (Nickel Aluminium Bronze) and MAB (Manganese Aluminium Bronze)
  8. Dezincification in cast and heat-treated alpha-beta brass samples
  9. Cavitation of some copper alloys for naval propellers: electrolyte effect
  10. Cover Picture: Materials and Corrosion. 6/2023
  11. Influence of Cavitation in Seawater on the Etching Attack of Manganese-Aluminum-Bronzes
  12. Additive Manufacturing Processes in Selected Corrosion Resistant Materials: A State of Knowledge Review
  13. Study of Effect of Nickel Content on Tribocorrosion Behaviour of Nickel–Aluminium–Bronzes (NABs)
  14. Hollow wire corrosion of stainless steel ropes in a marine mooring system and its relation to microstructure
  15. Austenitic and Lean Duplex Stainless Steel Rebars in Concrete Under Simultaneous Load and Marine Corrosion Effect: A Service Lifetime Study
  16. Corrosion evaluation of welded nickel aluminum bronze and manganese aluminum bronze in synthetic sea water
  17. VISITS WITH STUDENTS TO COMPANIES: EFFECTIVE LEARNING ON SITE
  18. Etching of Manganese Aluminum Bronze by Ultrasound in Seawater
  19. Corrosion Behavior of Heat-Treated Nickel-Aluminum Bronze and Manganese-Aluminum Bronze in Natural Waters
  20. Failure analysis of a butterfly valve made with nickel aluminum Bronze (NAB) and manganese aluminum Bronze (MAB)
  21. Influence of Annealing Treatments on Welded CuNi Sheets on the Corrosion Behaviour in Sea Water
  22. PHD STUDENTS AND INDUSTRY: LOOKING FOR A SYNERGISTIC ENVIRONMENT TO DO A PHD
  23. Non-destructive techniques for the detection of sigma phase in duplex stainless steel: A comprehensive review
  24. Heat Treatment Effect on the Microstructure and the Corrosion Resistance of Manganese-Aluminum Bronzes
  25. Effect of Ti on Microstructure, Mechanical Properties and Corrosion Behavior of a Nickel-Aluminum Bronze Alloy
  26. Corrosion of Cast Aluminum Alloys: A Review
  27. Evaluation of the mechanical behavior of 2001 LDSS and 2205 DSS reinforcements exposed to simultaneous load and corrosion in chloride contained concrete pore solution
  28. Most fatal oil & gas pipeline accidents through history: A lessons learned approach
  29. Second-order fatigue of intrinsic mean stress under random loadings
  30. Prenuclear L∗+H Activates Alternatives for the Accented Word
  31. A plain linear rule for fatigue analysis under natural loading considering the coupled fatigue and corrosion effect
  32. Stress corrosion cracking of new 2001 lean–duplex stainless steel reinforcements in chloride contained concrete pore solution: An electrochemical study
  33. A Fuzzy Logic method: Predicting pipeline external corrosion rate
  34. Corrosion of Nonferrous Metals and Their Alloys
  35. Design of a multichannel potentiostat and its application to corrosion testing of a nickel-aluminum bronze
  36. A plain linear rule for fatigue analysis under natural loading considering the sequence effect
  37. Effect of the Temperature in the Mechanical Properties of Austenite, Ferrite and Sigma Phases of Duplex Stainless Steels Using Hardness, Microhardness and Nanoindentation Techniques
  38. Influence of the thickness of intumescent paint in the position of steels (fire safety)
  39. Study of the Precipitation of Secondary Phases in Duplex and Superduplex Stainless Steel
  40. Detection of Secondary Phases in UNS S32760 Superduplex Stainless Steel by Destructive and Non-destructive Techniques
  41. Dual-steel portal frame design to withstand a fire exposure of 45 minutes
  42. Microstructure of a Heat Treated Nickel-Aluminum Bronze and Its Corrosion Behavior in Simulated Fresh and Sea Water
  43. Identification of sigma and chi phases in duplex stainless steels
  44. Alternative Questions
  45. Construction Rehabilitation in Civil Engineering at the Bachelor Degree Level: Guideline Course
  46. Fire-resistance industrial portal frames: design with different mechanical properties steels and 35 meters spans
  47. Detection of defects in metallic specimens supported by ultrasound propagation simulations
  48. Detección de la corrosión por picadura en aceros inoxidables empleando ultrasonidos
  49. Multiple Focus Strategies in Pro‐Drop Languages: Evidence from Ellipsis in Spanish
  50. Study of historical developments in the use of fire resistant steels
  51. Relationship between microstructure and fracture types in a UNS S32205 duplex stainless steel
  52. Characterization of Sigma Phase in Duplex Stainless Steels Using Non-destructive Ultrasonic Techniques
  53. Study of historical developments in the use of fire resistant steels
  54. Degradation in Seawater of Structural Adhesives for Hybrid Fibre-Metal Laminated Materials
  55. Risk assessment of corrosion in oil and gas pipelines using fuzzy logic
  56. Responding to alternative and polar questions
  57. Revisión y estado del arte de la corrosividad del etanol y sus mezclas con gasolina
  58. Mechanical Behavior of Anchorages for Reinforcing Marine Stone Structures Subjected to Sea Waves
  59. Polymeric and cementitious mortars for the reconstruction of natural stone structures exposed to marine environments
  60. How much background in chemistry do material science and engineering students require?
  61. Collapse of Steel Bridges
  62. Letter to the Editor:Is the Cost of Corrosion Really Quantifiable?
  63. Investment criteria for the selection of cogeneration plants—a state of the art review
  64. The mining industry in the European Union: Analysis of inter-industry linkages using input–output analysis
  65. Methodology to study cost of corrosion
  66. Case studies in adhesives selection
  67. The role of hydrogen in microbiologically influenced corrosion and stress corrosion cracking
  68. Regioselective lipase-catalyzed synthesis of l-glutamic α-monoamide derivatives. Effect of the N-blocking group
  69. Modelling the stress corrosion cracking of low alloy steels
  70. Improved metallographic preparation of IN-657 alloy by high temperature oxidation