All Stories

  1. Reducing search space of optimization algorithms for determination of machining sequences by consolidating decisive agents

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, January 2020, SAGE Publications

    M. J. Nategh

  2. An elastokinematic solution to the inverse kinematics of microhexapod manipulator with flexure joints of varying rotation center

    Article • Mechanism and Machine Theory, March 2016, Elsevier

    M. J. Nategh

  3. Extracting the manufacturing information of machining features for computer-aided process planning systems

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, January 2016, SAGE Publications

    M. J. Nategh

  4. Workspace, dexterity and dimensional optimization of microhexapod

    Article • Assembly Automation, September 2015, Emerald

    M. J. Nategh

  5. A procedure for planning acyclic setups on the basis of simultaneous sequencing of setups and features

    Article • The International Journal of Advanced Manufacturing Technology, September 2015, Springer Science + Business Media

    M. J. Nategh

  6. Contour maps for developing optimal toolpath and workpiece setup in hexapod machine tools by considering the kinematics nonlinearity

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2015, SAGE Publications

    M. J. Nategh

  7. A study on motion of machine tools’ hexapod table on freeform surfaces with circular interpolation

    Article • The International Journal of Advanced Manufacturing Technology, August 2014, Springer Science + Business Media

    M. J. Nategh, Siamak Pedrammehr

  8. Kinematic nonlinearity analysis in hexapod machine tools: Symmetry and regional accuracy of workspace

    Article • Mechanism and Machine Theory, January 2014, Elsevier

    M. J. Nategh

  9. Development of a novel adaptive nonuniform rational basis spline interpolator with limited kinematic error for hexapod machine tools

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, December 2013, SAGE Publications

    M. J. Nategh

  10. A pilot framework developed as a common platform integrating diverse elements of computer aided fixture design

    Article • International Journal of Production Research, November 2013, Taylor & Francis

    M. J. Nategh

  11. Theoretical and experimental investigation of the frictional behavior of the tool–chip interface in ultrasonic-vibration assisted turning

    Article • International Journal of Machine Tools and Manufacture, February 2013, Elsevier

    M. J. Nategh

  12. Analytical modeling and experimental investigation of ultrasonic-vibration assisted oblique turning, part II: Dynamics analysis

    Article • International Journal of Mechanical Sciences, October 2012, Elsevier

    M. J. Nategh

  13. Analytical modeling and experimental investigation of ultrasonic-vibration assisted oblique turning, part III: Experimental investigation

    Article • International Journal of Mechanical Sciences, October 2012, Elsevier

    M. J. Nategh

  14. Analytical modeling and experimental investigation of ultrasonic-vibration assisted oblique turning, part I: Kinematics analysis

    Article • International Journal of Mechanical Sciences, October 2012, Elsevier

    M. J. Nategh

  15. A Multi-TAD Framework for Recognizing Machining Features Using Hint Based Recognition Algorithm

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  16. Mechanistic Model of Work-Piece Diametrical Error in Conventional and Ultrasonic Assisted Turning

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  17. Modeling the Hydrodynamic Lubrication Function of Scrapings in Machine Tool Slideways

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  18. A Multi-TAD Framework for Recognizing Machining Features Using Hint Based Recognition Algorithm

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  19. Mechanistic Model of Work-Piece Diametrical Error in Conventional and Ultrasonic Assisted Turning

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  20. Modeling the Hydrodynamic Lubrication Function of Scrapings in Machine Tool Slideways

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  21. An Investigation of Lateral Surface Hardness and Related Cutting Forces in One-Directional Ultrasonic-Vibration Assisted Turning

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  22. An Investigation of Lateral Surface Hardness and Related Cutting Forces in One-Directional Ultrasonic-Vibration Assisted Turning

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    M. J. Nategh

  23. Analysis of the elastic and plastic roll bending of sheet metal on a rubber pad

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, December 2011, SAGE Publications

    M. J. Nategh

  24. Analytical solution to the elastic bending of long and rectangular thin plate resting on rubber foundation

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, September 2011, SAGE Publications

    M. J. Nategh

  25. Analysis of Diametrical Error of Machined Workpieces in Ultrasonic Vibration Assisted Turning

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    M. J. Nategh

  26. Analysis of Continuous Bending of Thin Plates in Rubber Pad Bending

    Article • Key Engineering Materials, March 2011, Trans Tech Publications

    M. J. Nategh

  27. Analytical-Numerical Solution of Bending Problem of Thin Plates in Rubber Pad Bending

    Article • Key Engineering Materials, March 2011, Trans Tech Publications

    M. J. Nategh

  28. Experimental Analysis of Work-piece’s Diametrical Error in Ultrasonic-Vibration-Assisted Turning

    Article • January 2011, American Institute of Physics

    M. J. Nategh

  29. An Investigation on the Influence of Cutting-Force’s Components on the Work-piece Diametrical Error in Ultrasonic-Vibration-Assisted Turning

    Article • January 2011, American Institute of Physics

    M. J. Nategh

  30. A Statistical Approach to the Forward Kinematics Nonlinearity Analysis of Gough-Stewart Mechanism

    Article • Journal of Applied Mathematics, January 2011, Hindawi Publishing Corporation

    M. J. Nategh

  31. Modeling the Force, Surface Roughness and Cutting Temperature in Ultrasonic Vibration-Assisted Turning of Al7075

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    M. J. Nategh

  32. Prediction of Machining Force and Surface Roughness in Ultrasonic Vibration-Assisted Turning Using Neural Networks

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    M. J. Nategh

  33. A total solution to kinematic calibration of hexapod machine tools with a minimum number of measurement configurations and superior accuracies

    Article • International Journal of Machine Tools and Manufacture, December 2009, Elsevier

    M. J. Nategh

  34. Concurrent engineering planning on the basis of forward and backward effects of manufacturing processes

    Article • International Journal of Production Research, September 2009, Taylor & Francis

    M. J. Nategh

  35. Application of design of experiments for modelling surface roughness in ultrasonic vibration turning

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, March 2009, SAGE Publications

    M. J. Nategh

  36. FEM analysis of ultrasonic-vibration-assisted turning and the vibratory tool

    Article • Journal of Materials Processing Technology, May 2008, Elsevier

    M. J. Nategh

  37. A comprehensive study on the free vibration of machine tools’ hexapod table

    Article • The International Journal of Advanced Manufacturing Technology, March 2008, Springer Science + Business Media

    M. J. Nategh

  38. Experiments with a Low-Cost Hot Isothermal Pressing Machine Developed for Superplastic Forming

    Article • Journal of Materials Engineering and Performance, March 2008, Springer Science + Business Media

    M. J. Nategh

  39. An enhanced methodical approach to machine tool design procedure

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, February 2008, SAGE Publications

    M. J. Nategh

  40. Vibration analysis of machine tool’s hexapod table

    Article • The International Journal of Advanced Manufacturing Technology, August 2007, Springer Science + Business Media

    M. J. Nategh

  41. Optimum design of gripper jaws for tapered components

    Article • Robotica, July 1990, Cambridge University Press

    M. J. Nategh

  42. A concept for a flexible forging-machining system (FFMS)

    Article • International Journal of Machine Tools and Manufacture, January 1990, Elsevier

    M. J. Nategh

  43. CAD of devices for gripping tapered components

    Article • The International Journal of Advanced Manufacturing Technology, November 1989, Springer Science + Business Media

    M. J. Nategh

  44. A knowledge-based jig-and-fixture designers' assistant

    Article • The International Journal of Advanced Manufacturing Technology, February 1989, Springer Science + Business Media

    M. J. Nategh, Duc Pham