All Stories

  1. Modelling the sensitivity of fresh state performance to the mix design of conventional and self-compacting concretes
  2. Utilisation of Recycled Concrete Powder to Activate Calcined Clay in LC3 Systems
  3. Mechanical and Durability Performance of Concrete Containing Calcined Excavated London Clay
  4. Construction and Demolition Waste Management: A Systematic Scoping Review of Risks to Occupational and Public Health
  5. From composition to the microstructure and durability of limestone ternary blended cements: A systematic review
  6. Microstructure and phase assemblage of low-clinker cements during the early stages of carbonation
  7. Reuse of UK alum water treatment sludge in cement-based materials
  8. The use of oil-based mud cuttings as an alternative raw material to produce high sulfate-resistant oil well cement
  9. Editorial
  10. Oil-based mud cutting as an additional raw material in clinker production
  11. Expansion of CEM I and slag-blended cement mortars exposed to combined chloride-sulphate environments
  12. Editorial: Selected papers from the 36th Cement and Concrete Science Conference, Cardiff University, September 2016
  13. Relationship between cement composition and the freeze–thaw resistance of concretes
  14. Impact of microstructure on the performance of composite cements: Why higher total porosity can result in higher strength
  15. Slag composite cements perform better when cured for longer periods
  16. The effect of improper curing on properties that may affect concrete durability
  17. Performance of plain and slag-blended cements and mortars exposed to combined chloride–sulfate solution
  18. How does changing the composition of clink-slag-limestone cements affect their performance?
  19. Chloride binding and diffusion in slag blends: Influence of slag composition and temperature
  20. Thermal stability of C-S-H phases and applicability of Richardson and Groves' and Richardson C-(A)-S-H(I) models to synthetic C-S-H
  21. Influence of slag composition and temperature on the hydration and microstructure of slag blended cements
  22. Effect of synthesis parameters on the performance of alkali-activated non-conformant EN 450 pulverised fuel ash
  23. The impact of alumina availability on sulfate resistance of slag composite cements
  24. Would a carbon tax encourage the use of green concrete?
  25. Editorial: multifunctional cements and concretes
  26. Editorial
  27. Composition, silicate anion structure and morphology of calcium silicate hydrates (C-S-H) synthesised by silica-lime reaction and by controlled hydration of tricalcium silicate (C3S)
  28. What do we know about how sulphates attack concrete?
  29. Current knowledge of external sulfate attack
  30. Waste incinerator residue treatment: variability implications
  31. Impact of water vapour and carbon dioxide on surface composition of C3A polymorphs studied by X-ray photoelectron spectroscopy
  32. The role of the alumina content of slag, plus the presence of additional sulfate on the hydration and microstructure of Portland cement-slag blends
  33. Editorial
  34. Masonry units bound with waste vegetable oil – Chemical analysis and evaluation of engineering properties
  35. Supercritical Carbonation of Lightweight Aggregate Containing Mortar: Thermal Behavior
  36. The interaction between Portland cement phases and moisture in the air
  37. Influence of water vapour and carbon dioxide on free lime during storage at 80°C, studied by Raman spectroscopy
  38. Non-Conventional Cementitious Binders
  39. Portland cement ages on exposure to air.
  40. Editorial
  41. Editorial
  42. Corrigendum
  43. Erratum
  44. Embodied carbon dioxide in concrete: Variation with common mix design parameters
  45. Alkali activated solidification/stabilisation of air pollution control residue using co-fired PFA: mineralogical characterisation
  46. Alkali activated solidification/stabilisation of air pollution control residues and co-fired pulverised fuel ash
  47. Characterisation of cement hydrate phases by TEM, NMR and Raman spectroscopy
  48. Current themes in cement research
  49. Interaction of water vapour with anhydrous cement minerals
  50. Structure, bonding and morphology of hydrothermally synthesised xonotlite
  51. Cell Dimensions and Composition of Nanocrystalline Calcium Silicate Hydrate Solid Solutions. Part 1: Synchrotron-Based X-Ray Diffraction
  52. Surface carbonation of synthetic C-S-H samples: A comparison between fresh and aged C-S-H using X-ray photoelectron spectroscopy
  53. SEM–SCA: combined SEM – Raman spectrometer for analysis of OPC clinker
  54. Hydrophobic coagulation and aggregation of hematite particles with sodium dodecylsulfate
  55. Structural Features of C?S?H(I) and Its Carbonation in Air?A Raman Spectroscopic Study. Part I: Fresh Phases
  56. Structural Features of C?S?H(I) and Its Carbonation in Air?A Raman Spectroscopic Study. Part II: Carbonated Phases
  57. In situRaman analysis of hydrating C3A and C4AF pastes in presence and absence of sulphate
  58. X-ray photoelectron spectroscopic investigation of nanocrystalline calcium silicate hydrates synthesised by reactive milling
  59. Hydration of tricalcium aluminate (C3A) in the presence and absence of gypsum—studied by Raman spectroscopy and X-ray diffraction
  60. Incorporation of zinc into calcium silicate hydrates, Part I: formation of C-S-H(I) with C/S=2/3 and its isochemical counterpart gyrolite
  61. X-ray photoelectron spectroscopy of aluminium-substituted tobermorite
  62. Preparation of Nanostructured Materials by HeterocoagulationInteraction of Montmorillonite with Synthetic Hematite Particles
  63. ToF–SIMS depth profiling analysis of the uptake of Ba2+ and Co2+ ions by natural kaolinite clay
  64. X-ray photoelectron study of oxygen bonding in crystalline C?S?H phases
  65. Erratum to “Characterisation of crystalline C-S-H phases by X-ray photoelectron spectroscopy (XPS)” [Cem. Concr. Res. 33 (6) (2003) 899–911]
  66. X-ray photoelectron spectroscopy of the cement clinker phases tricalcium silicate and β-dicalcium silicate
  67. Characterisation of crystalline C-S-H phases by X-ray photoelectron spectroscopy
  68. Photoelectron spectroscopy study of U–Ni alloys: a comparison of thin films and bulk systems
  69. Synthesis and electronic properties of Th–N films
  70. Preparation and photoelectron spectroscopy study of UNx thin films
  71. Surface spectroscopic studies of Cs+, and Ba2+sorption on chlorite-illite mixed clay
  72. Role of organic acids in lead patination
  73. Nature of lead patination
  74. TOF-SIMS study of Cs + sorption on natural kaolinite
  75. Quantification of Raman Spectra for the Primary Atmospheric Corrosion Products of Lead
  76. Raman spectroscopy of cementitious materials