All Stories

  1. Fitting of an FCG test of the WE43C and AA7050 alloys using two phase-fields and a Constant- ...

    Article • International Journal of Fatigue, May 2026, Elsevier

    Sr. Julian Avila

  2. In-situ observation of precipitation and austenite reversion in additively manufactured 18 wt. % Ni maraging steel

    Article • Materialia, March 2026, Elsevier

    Sr. Julian Avila

  3. Part II – Microstructural and mechanical characterization of additively manufactured components of 18Ni300M steel with gas and water-atomized powders: a comparative study between aged PBF-LB and conventional material focused on the fatigue behavior

    Article • The International Journal of Advanced Manufacturing Technology, February 2026, Springer Science + Business Media

    Sr. Julian Avila

  4. Machine Learning for Bead Geometry Prediction in 5083-H112 Aluminum Laser Welding Considering a Challenging Dataset

    Article • Journal of Materials Research and Technology, February 2026, Elsevier

    Sr. Julian Avila

  5. Microstructural evolution in high-temperature direct aging on PBF-LB 15-5PH stainless steel

    Article • Acta Materialia, January 2026, Elsevier

    Sr. Julian Avila

  6. CALPHAD-based simulation of precipitation kinetics during heat treatment in IN718 fabricated by directed energy deposition

    Article • January 2026, Elsevier

    Sr. Julian Avila

  7. Corrosion Behavior and Mechanical Properties as a Function of Reverted Austenite in Laser Powder Bed Fusion 18Ni Maraging Steel

    Article • Journal of Materials Engineering and Performance, October 2025, Springer Science + Business Media

    Sr. Julian Avila

  8. Localised corrosion assessment of friction-stir welded AA7050-T76511 alloy: galvanic interactions and microstructural effects

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, May 2025, SAGE Publications

    Sr. Julian Avila

  9. Correction: As-built microstructure and mechanical behavior of Inconel 718 processed via directed energy deposition with laser beam

    Article • Progress in Additive Manufacturing, March 2025, Springer Science + Business Media

    Sr. Julian Avila

  10. As-built microstructure and mechanical behavior of Inconel 718 processed via directed energy deposition with laser beam

    Article • Progress in Additive Manufacturing, March 2025, Springer Science + Business Media

    Sr. Julian Avila

  11. Heat treatment effect on microstructural evolution of cold spray additive manufacturing Ti6Al4V

    Article • Journal of Materials Science, March 2025, Springer Science + Business Media

    Sr. Julian Avila

  12. Assessment of Sustainable Ethanolamine-Based Protic Ionic Liquids with Varied Carboxylic Acid Chains as Corrosion Inhibitors for Carbon Steel in Saline Environments

    Article • Molecules, February 2025, MDPI AG

    Sr. Julian Avila

  13. Influence of Post-Weld Heat Treatment on the Mechanical Properties and Microstructure of a Seamless Pipe of an ASTM A335 Gr P91 Steel

    Article • Materials Research, January 2025, FapUNIFESP (SciELO)

    Sr. Julian Avila

  14. Grain refinement of Inconel 625 during wire-based directed energy deposition additive manufacturing by in-situ added TiB2 particles: Process development, microstructure evolution and mechanical characterization

    Article • Intermetallics, December 2024, Elsevier

    Sr. Julian Avila

  15. Influence of build orientation and heat treatment on high cycle fatigue of additively manufactured AlSi10Mg

    Article • Materials Science and Engineering A, November 2024, Elsevier

    Sr. Julian Avila

  16. Effect of Co Addition on the Microstructure and Mechanical Properties of an Al-2wt.%Ni Alloy

    Article • Metals, October 2024, MDPI AG

    Sr. Julian Avila

  17. Mechanical and corrosion characteristics of heat-treated wire arc additive manufactured parts of Inconel ® 625 superalloy

    Article • Progress in Additive Manufacturing, September 2024, Springer Science + Business Media

    Sr. Julian Avila

  18. Design Guidelines and Performance Analysis of a Wideband Coaxial Horn Antenna Fabricated via Additive Manufacturing

    Article • IEEE Open Journal of Antennas and Propagation, August 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Sr. Julian Avila

  19. Microstructure Evolution and Corrosion Resistance Evaluation of 17-4 Precipitation Hardening Stainless Steel Processed by Laser Powder Bed Fusion

    Article • Journal of Materials Engineering and Performance, July 2024, Springer Science + Business Media

    Sr. Julian Avila

  20. Characterization and Analysis of Additively Manufactured Maraging Steel by Analytical Electron Microscopy with Electron Energy Loss Spectroscopy, X-ray Energy Dispersive Spectroscopy, and 4D-STEM

    Article • Microscopy and Microanalysis, July 2024, Oxford University Press (OUP)

    Sr. Julian Avila

  21. Precipitation and reverted austenite formation in maraging 350 steel: Competition or cooperation?

    Article • Acta Materialia, May 2024, Elsevier

    Sr. Julian Avila

  22. The Effect of the Deposition Strategy and Heat Treatment on Cold Spray Additive Manufactured 316L Stainless Steel

    Article • Advanced Engineering Materials, April 2024, Wiley

    Sr. Julian Avila

  23. Microstructure gradients across the white etching and transition layers of a heavy haul pearlitic steel

    Article • Materials Characterization, April 2024, Elsevier

    Sr. Julian Avila

  24. Powder bed fusion of high-Mn-N Ni-free austenitic stainless steel: achieving low porosity and high mechanical strength through process parameter selection

    Article • The International Journal of Advanced Manufacturing Technology, February 2024, Springer Science + Business Media

    Sr. Julian Avila

  25. Performance evaluation of a novel monofilar helical antenna with tapered cross-section wire fabricated via metal additive manufacturing

    Article • AEU - International Journal of Electronics and Communications, February 2024, Elsevier

    Sr. Julian Avila

  26. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties

    Article • The International Journal of Advanced Manufacturing Technology, January 2024, Springer Science + Business Media

    Sr. Julian Avila

  27. Microstructural and mechanical characterization of additively manufactured parts of maraging 18Ni300M steel with water and gas atomized powders feedstock

    Article • The International Journal of Advanced Manufacturing Technology, November 2023, Springer Science + Business Media

    Sr. Julian Avila

  28. On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction

    Article • Metallurgical and Materials Transactions A, October 2023, Springer Science + Business Media

    Sr. Julian Avila

  29. Effect of heat treatments on Inconel 625 fabricated by wire and arc additive manufacturing: An in situ synchrotron X-ray diffraction analysis

    Article • Science and Technology of Welding & Joining, October 2023, SAGE Publications

    Sr. Julian Avila

  30. EBSD-data analysis of an additive manufactured maraging 300 steel submitted to different tempering and aging treatments

    Article • Materials Characterization, September 2023, Elsevier

    Sr. Julian Avila

  31. Fracture toughness and wear resistance of heat-treated H13 tool steel processed by laser powder bed fusion

    Article • Additive Manufacturing, September 2023, Elsevier

    Sr. Julian Avila

  32. Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel

    Article • Acta Materialia, April 2023, Elsevier

    Sr. Julian Avila

  33. In situ interlayer hot forging arc-based directed energy deposition of Inconel® 625: process development and microstructure effects

    Article • Additive Manufacturing, March 2023, Elsevier

    Sr. Julian Avila

  34. Improvement of tensile properties by controlling the microstructure and crystallographic data in commercial pearlitic carbon-silicon steel via quenching and partitioning (Q&P) process

    Article • Journal of Materials Research and Technology, March 2023, Elsevier

    Sr. Julian Avila

  35. Efficient Crack Length Measurement Using A* Shortest Path Methodology for a Phase-Field Fracture Framework

    Article • Latin American Journal of Solids and Structures, January 2023, FapUNIFESP (SciELO)

    Sr. Julian Avila

  36. Cerium conversion coating and sol-gel coating for corrosion protection of the WE43 Mg alloy

    Article • Corrosion Science, September 2022, Elsevier

    Sr. Julian Avila

  37. The effect of hydrogen on the fracture toughness of friction‐stir welded API 5L X70 pipeline steels

    Article • Fatigue & Fracture of Engineering Materials & Structures, August 2022, Wiley

    Julian Avila, Sr. Julian Avila

  38. Effect of saline environment on the fatigue crack growth resistance of WE43 Mg alloy

    Article • Materials Today Communications, June 2022, Elsevier

    Sr. Julian Avila

  39. Development of a complex multicomponent microstructure on commercial carbon-silicon grade steel by governing the phase transformation mechanisms to design novel quenching and partitioning processing

    Article • Journal of Materials Research and Technology, May 2022, Elsevier

    Sr. Julian Avila

  40. Pulsed FCAW of Martensitic Stainless Clads onto Mild Steel: Microstructure, Hardness, and Residual Stresses

    Article • Materials, April 2022, MDPI AG

    Dr. Ricardo Henrique Buzolin, Sr. Julian Avila

  41. Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments

    Article • International Journal of Fatigue, January 2022, Elsevier

    Sr. Julian Avila

  42. Effects of build orientation and heat treatments on the tensile and fracture toughness properties of additively manufactured AlSi10Mg

    Article • International Journal of Mechanical Sciences, January 2022, Elsevier

    Sr. Julian Avila

  43. Plane-strain fracture toughness of thin additively manufactured maraging steel samples

    Article • Additive Manufacturing, January 2022, Elsevier

    Sr. Julian Avila

  44. Effect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing : Microstructure and synchrotron X-ray diffraction analysis

    Article • Additive Manufacturing, December 2021, Elsevier

    Professor Telmo G. Santos, Sr. Julian Avila

  45. Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fire-resistant steel

    Article • Materials Characterization, December 2021, Elsevier

    Sr. Julian Avila

  46. Direct Observation of Austenite Reversion During Aging of 18Ni (350 Grade) Maraging Steel Through In-Situ Synchrotron X-Ray Diffraction

    Article • Metallurgical and Materials Transactions A, November 2021, Springer Science + Business Media

    Sr. Julian Avila

  47. Corrosion resistance of WE43 Mg alloy in sodium chloride solution

    Article • Materials Chemistry and Physics, November 2021, Elsevier

    Sr. Julian Avila

  48. Deformation-induced martensitic transformation in Co-28Cr-6Mo alloy produced by laser powder bed fusion: Comparison surface vs. bulk

    Article • Additive Manufacturing, October 2021, Elsevier

    PhD PAULO Willian Carvalho SARVEZUK, Sr. Julian Avila

  49. Effect of the as-built microstructure on the martensite to austenite transformation in a 18Ni maraging steel after laser-based powder bed fusion

    Article • Additive Manufacturing, October 2021, Elsevier

    Sr. Julian Avila

  50. Hydrogen-induced cracking and corrosion behavior of friction stir welded plates of API 5L X70 pipeline steel

    Article • International Journal of Hydrogen Energy, August 2021, Elsevier

    Sr. Julian Avila

  51. Microstructure and Mechanical Properties of Nb-API X70 Low Carbon Steel

    Article • Metallography Microstructure and Analysis, August 2021, Springer Science + Business Media

    Sr. Julian Avila

  52. Influence of Laser Beam Power and Scanning Speed on the Macrostructural Characteristics of AISI 316L and AISI 431 Stainless Steel Depositions Produced by Laser Cladding Process

    Article • Journal of Materials Engineering and Performance, April 2021, Springer Science + Business Media

    Dr Milton SF LIMA, Sr. Julian Avila

  53. The study of volumetric wearing of PCBN/W-Re composite tool during friction stir processing of pipeline steels (X70) plates

    Article • The International Journal of Advanced Manufacturing Technology, March 2021, Springer Science + Business Media

    Sr. Julian Avila

  54. Corrosion Behavior and Microstructural Characterization of Friction Stir Welded API X70 Steel

    Article • Journal of Materials Engineering and Performance, March 2021, Springer Science + Business Media

    Sr. Julian Avila

  55. Microstructural, Mechanical, and Fracture Characterization of Metal Matrix Composite Manufactured by Accumulative Roll Bonding

    Article • Journal of Materials Engineering and Performance, March 2021, Springer Science + Business Media

    Sr. Julian Avila

  56. Effect of Combined Tempering and Aging in the Austenite Reversion, Precipitation, and Tensile Properties of an Additively Manufactured Maraging 300 Steel

    Article • Journal of Materials Engineering and Performance, February 2021, Springer Science + Business Media

    Sr. Julian Avila

  57. Investigation of Building Orientation and Aging on Strength–Stiffness Performance of Additively Manufactured Maraging Steel

    Article • Journal of Materials Engineering and Performance, January 2021, Springer Science + Business Media

    Sr. Julian Avila

  58. Microstructural Characterization of Maraging 300 Steel Fabricated by Select Laser Melting

    Article • January 2021, Springer Science + Business Media

    Sr. Julian Avila

  59. Restoration Mechanisms at Moderate Temperatures for As-Cast ZK40 Magnesium Alloys Modified with Individual Ca and Gd Additions

    Article • Crystals, December 2020, MDPI AG

    Dr. Ricardo Henrique Buzolin, Sr. Julian Avila

  60. Effect of Post-Weld Heat Treatment on Hardness in Superduplex Stainless Steel ASTM A890/A890M - Grade 6A

    Article • Materials Science Forum, October 2020, Trans Tech Publications

    Sr. Julian Avila

  61. Investigation of material flow and thermomechanical behavior during friction stir welding of an AZ31B alloy for threaded and unthreaded pin geometries using computational solid mechanics simulation

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, September 2020, SAGE Publications

    Sr. Julian Avila

  62. In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)

    Article • Additive Manufacturing, August 2020, Elsevier

    Professor Telmo G. Santos, Sr. Julian Avila

  63. Numerical modeling of flow stress and grain evolution of an Mg AZ31B alloy based on hot compression tests

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, December 2019, Springer Science + Business Media

    Sr. Julian Avila

  64. Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel

    Article • Additive Manufacturing, October 2019, Elsevier

    Sr. Julian Avila

  65. Microstructural and Residuals Stress Analysis of Friction Stir Welding of X80 Pipeline Steel Plates Using Magnetic Barkhausen Noise

    Article • Journal of Nondestructive Evaluation, August 2019, Springer Science + Business Media

    Sr. Julian Avila

  66. Influence of hydrogen on the microstructure and fracture toughness of friction stir welded plates of API 5L X80 pipeline steel

    Article • International Journal of Hydrogen Energy, August 2019, Elsevier

    Sr. Julian Avila

  67. Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel

    Article • Materials Science and Engineering A, June 2019, Elsevier

    Sr. Julian Avila

  68. Wire and arc additive manufacturing of HSLA steel: Effect of thermal cycles on microstructure and mechanical properties

    Article • Additive Manufacturing, May 2019, Elsevier

    Professor Telmo G. Santos, Sr. Julian Avila

  69. Dependence of Wear and Mechanical Behavior of Nitrocarburized/CrN/DLC Layer on Film Thickness

    Article • Materials Research, January 2019, FapUNIFESP (SciELO)

    Sr. Julian Avila

  70. Microstructural Evolution Due to One Thermal Cycle in a Superduplex Stainless Steel ASTM A890/A890M - Grade 6A in the As-Weld and Post-Weld Heat Treatment Conditions

    Article • Materials Research, January 2019, FapUNIFESP (SciELO)

    Sr. Julian Avila

  71. Effect of the shot peening process on the fatigue strength of SAE 5160 steel

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, December 2018, SAGE Publications

    Ph.D. Héctor Enrique Jaramillo Suárez, Sr. Julian Avila

  72. Physical simulation as a tool to understand friction stir processed X80 pipeline steel plate complex microstructures

    Article • Journal of Materials Research and Technology, November 2018, Elsevier

    Sr. Julian Avila

  73. Titanium Carbide (TiC) Production by Mechanical Alloying

    Article • September 2018, IntechOpen

    Ph.D. Héctor Enrique Jaramillo Suárez, Sr. Julian Avila

  74. Modeling of thermal cycles and microstructural analysis of pipeline steels processed by friction stir processing

    Article • The International Journal of Advanced Manufacturing Technology, July 2018, Springer Science + Business Media

    Sr. Julian Avila

  75. Mechanical and Fatigue Strength Assessment of Friction Stir Welded Plates of Magnesium Alloy AZ31B

    Article • Soldagem & Inspeção, March 2018, FapUNIFESP (SciELO)

    Sr. Julian Avila

  76. Guide for Recommended Practices to Perform Crack Tip Opening Displacement Tests in High Strength Low Alloy Steels

    Article • Soldagem & Inspeção, September 2016, FapUNIFESP (SciELO)

    Sr. Julian Avila

  77. Microstructure and fracture toughness of multipass friction stir welded joints of API-5L-X80 steel plates

    Article • Materials Science and Engineering A, September 2016, Elsevier

    Sr. Julian Avila

  78. Assessment of Ductile-to-Brittle Transition Behavior of Localized Microstructural Regions in a Friction-Stir Welded X80 Pipeline Steel with Miniaturized Charpy V-Notch Testing

    Article • Metallurgical and Materials Transactions A, April 2016, Springer Science + Business Media

    Sr. Julian Avila

  79. Fracture toughness assessment at different temperatures and regions within a friction stirred API 5L X80 steel welded plates

    Article • Engineering Fracture Mechanics, October 2015, Elsevier

    Sr. Julian Avila

  80. Friction stir welding of steels for the oil and gas industry

    Article • January 2013, Elsevier

    Sr. Julian Avila

  81. Fatigue of Friction Stir and GTAW Welded AZ31B Magnesium Alloy

    Article • July 2012, ASME International

    Ph.D. Héctor Enrique Jaramillo Suárez, Sr. Julian Avila

  82. Evaluación de la resistencia a la tensión de las juntas soldadas de la aleación de aluminio 6261-T5 por el proceso de soldadura por fricción-agitación

    Article • Informador Técnico, December 2011, SENA - Libraries

    Sr. Julian Avila

  83. C-terminal fragment of tetanus toxin heavy chain modulates sphingomyelinase activity in neuronal preparations

    Article • Toxicon, June 2008, Elsevier

    Sr. Julian Avila

  84. Production of mutants in the N-terminal region of the Hc-TeTx fragment on the basis of similarities with nerve growth factor. Evaluation of the viability on stressed cultured neurons

    Article • Toxicon, June 2008, Elsevier

    Sr. Julian Avila

  85. Elastic and inelastic seismic response comparison of reinforced concrete buildings with normal resistance concrete and with high resistance concrete

    Article • April 2006, WITPRESS LTD.

    Sr. Julian Avila

  86. Islet Graft Assessment in the Edmonton Protocol

    Article • Diabetes, December 2004, American Diabetes Association

    Sr. Julian Avila

  87. Estimating Body Fat from Anthropometry and Isotopic Dilution: A Four-Country Comparison

    Article • Obesity Research, December 2003, Wiley

    Professor barry m popkin, Sr. Julian Avila