All Stories

  1. Active flow and flame control using plasma-induced swirl in a bluff-body burner
  2. Predictive surrogate model for estimation of the fuel mixing of transient transverse hydrogen jet at supersonic flow
  3. Prediction of Hydrogen Mixing and Velocity Fields Behind a Strut Injector with Multi-Lobe Nozzles at scramjet engine using POD+LSTM technique
  4. Experimental Investigation of Hybrid Aluminum–Copper Exposed Electrodes for Thermal Hot Spot Reduction in DBD Plasma Actuators
  5. Sensitivity of Hypersonic MHD Flow Control to the Surface Catalytic Properties of a Reentry Body
  6. Enhancing PINN-Based Flow Reconstruction with Sparse and Decoupled Gradient-Weighted Sensor Placement
  7. Experimental analysis of dielectric thickness influence on novel electro-active polymer plasma actuators (EAP-PA) for flow control and ice removal systems
  8. Numerical model validation and aerodynamic MHD performance assessment with novel designs of contoured nozzles for hypersonic plasma wind tunnel testing
  9. Numerical Analysis of Pulsed Electric Field Effects on Droplet Dynamics in Electrostatic Rotary Bell Spraying
  10. Electrospray Optimization Using Dielectric Barrier Discharge Plasma Actuators Through a Conical Nozzle
  11. Experimental Analysis of Electrohydrodynamic Atomization of Different Fluids
  12. A sparse and decoupled supervision framework for multi-field reconstruction in turbulent flows using physics-informed neural networks
  13. Computational Analysis of Non-Reacting Flow in a Non-Premixed Burner Featuring a Plasma-Enhanced Bluff-Body Swirler
  14. Numerical Analysis of Flow Channel Expansion and Contraction Effects on Polymer Electrolyte Membrane Fuel Cell Performance
  15. Enhancing Automotive Paint Curing Process Efficiency: Integration of Computational Fluid Dynamics and Variational Auto-Encoder Techniques
  16. Experimental Analysis of Electrohydrodynamic Jet Actuation Modes Based on the Phase Doppler Technique
  17. Thermal Characterization of Ceramic Composites for Optimized Surface Dielectric Barrier Discharge Plasma Actuators
  18. New Electro-Active Polymers-Based Plasma Actuators for Simultaneous Flow Control and Ice Protection
  19. Numerical Analysis of a Hypersonic Body Under Thermochemical Non-Equilibrium and Different Catalytic Surface Conditions
  20. An experimental study on the use of dielectric barrier discharge plasma actuators for electrospray dynamics enhancement
  21. Enhancing electrostatic spray-painting efficiency with modified high-voltage conductors: A numerical study on pulsed electric fields
  22. Methane/Air Flame Control in Non-Premixed Bluff Body Burners Using Ring-Type Plasma Actuators
  23. Toward an Integrated Forcing, Exergetic and Constructal Analysis of Climate Change and Definition of the Possible Mitigation Measures
  24. A Chamfered Anchor Impeller Design for Enhanced Efficiency in Agitating Viscoplastic Fluids
  25. Optimizing aerodynamic stability in compressible flow around a vibrating cylinder with deep reinforcement learning
  26. Guidelines Toward an Expansive Exergy-Based Fiscal System That Encourages Energy Transition and Societal Wellness
  27. Theoretical Framework and Use of CNN Reconstruction With Optimal Sparse Sensor Placement in a Flow Field
  28. Artificial Neural Network SoftSensor for Water Distribution Networks
  29. Characterization of Plasma-Induced Flow Thermal Effects for Wind Turbine Icing Mitigation
  30. Developments in Taylor Cone Formation: Operation and Testing of Different Liquids
  31. Experimental Investigation of New Electro-Active Polymers-Based Plasma Actuators for Flow Control and Ice Mitigation Applications
  32. Numerical Investigation of Blocked Microchannel Heat Sink Configurations With Porous Fins
  33. The Impact of the Incoming Non-Equilibrium Flow on the Hypersonic Wind Tunnel Heat Flux Prediction of A Re-Entry Body
  34. Data-driven surrogate modelling of multistage Taylor cone–jet dynamics
  35. Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance
  36. Computational Modelling of Hypersonic Nozzles: The Influence of Enthalpy on the Flow Thermochemistry
  37. Holistic Characterization of MgO-Al2O3, MgO-CaZrO3, and Y2O3-ZrO2 Ceramic Composites for Aerospace Propulsion Systems
  38. Numerical modeling of magnetohydrodynamic non‐Newtonian flow in a cross‐slot
  39. Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications
  40. Enhancing Automotive Paint Curing Process Efficiency: Integration of Cfd and Variational Auto-Encoder Techniques
  41. A Novel EHD-Jet System to Achieve High Performance in Terms of Energy Consumption and Heat Transfer
  42. Flow Manipulation Strategies: Detached Eddy Simulation Study of DBD Plasma Actuators in a Bluff Body Burner
  43. Numerical Investigation of Electrostatic Coating Using Nitrotherm Spray Technique
  44. Numerical simulation of vectoring of arc plasma jet using Coanda effect
  45. Numerical Study of Magnetohydrodynamic Hypersonic Flow Around a Blunt Body Using OpenFOAM
  46. Numerical analysis and optimization of heat transfer enhancement on a flat plate by an EHD jet
  47. On modal decomposition as surrogate for charge-conservative EHD modelling of Taylor Cone jets
  48. Plasma Actuators for Cycloidal Rotor Thrust Vectoring Enhancement in Airships
  49. Control of the flame and flow characteristics of a non-premixed bluff body burner using dielectric barrier discharge plasma actuators
  50. A Three-Dimensional Numerical Investigation of Taylor Cone Jets Instabilities Using VOF Method
  51. Improving Efficiency of Automotive Coating and Curing Processes Through Deep Learning Algorithms and High-Fidelity CFD Modeling
  52. A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate‐blocked interdigitated flow field designs
  53. Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset
  54. The effect of the dielectric barrier discharge plasma actuator in the control of non-reactive flow in a non-premixed bluff body burner
  55. Dynamics of three-dimensional electrohydrodynamic instabilities on Taylor cone jets using a numerical approach
  56. Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators
  57. Catalytic wall effects for hypersonic nozzle flow in thermochemical non-equilibrium
  58. Enhancement of a cycloidal self-pitch vertical axis wind turbine performance through DBD plasma actuators at low tip speed ratio
  59. Development of a Background-Oriented Schlieren (BOS) System for Thermal Characterization of Flow Induced by Plasma Actuators
  60. Exergy, ecology and democracy - concepts of a vital society or a proposal for an exergy tax 30 years after - Part 1: Generalities
  61. Exergy, ecology and democracy - concepts of a vital society or a proposal for an exergy tax 30 years after - Part 2: Exergy and UN sustainable development goals
  62. Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation
  63. Comparison of PEMFC performance with parallel serpentine and parallel serpentine-baffled flow fields under various operating and geometrical conditions; a parametric study
  64. The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study
  65. Higher performance micro-channel heat sink design and analysis
  66. Numerical Analysis of Interfacial Electrohydrodynamic Flow With Modal Decomposition
  67. Review of coating and curing processes: Evaluation in automotive industry
  68. Electrostatic Painting Process: Impact of Using Connected High-Voltage Embodiments With Rotary Bell Atomizers on Droplets Transport and Deposition
  69. Numerical Simulation of Anti-Icing Effect With Dielectric Barrier Discharge Plasma Actuators on a Surface of an Airfoil
  70. Numerical Investigation of Automotive Paint Oven for Improving the Thermal Efficiency
  71. Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields
  72. Numerical Investigation of Plasma Actuator Effects on Flow Control Over a Three-Dimensional Airfoil With a Sinusoidal Leading Edge
  73. Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application
  74. Response to comment on: “A critical review on heat and mass transfer modelling of viral infection and virion evolution the case of SARS-COV2”
  75. Improved performance of polyimide Cirlex‐based dielectric barrier discharge plasma actuators for flow control
  76. Active control assessments towards optimizing the performance of a cycloidal rotor at hover
  77. Coupled Active Control Technique for Oscillating Blades in a Cycloidal Rotor Using CFD and ANN Analysis by Including 3D End Wall Effects
  78. Fluence As an Instrument Towards a Unified Representation of Fluiddynamic Related Phenomena
  79. Numerical Simulation of Electrified Liquid Jets Using a Geometrical VoF Method
  80. Sociotechnical design a review and future interdisciplinary perspectives involving thermodynamics in today societal contest
  81. Analysis and Implementation of Dielectric Barrier Discharge Plasma Actuators for Ground Vehicles Wake Reduction
  82. Comparative Evaluation of Dielectric Materials for Plasma Actuators Active Flow Control and Heat Transfer Applications
  83. Influence of Exposed Electrode Thickness on Plasma Actuators Performance for Coupled Deicing and Flow Control Applications
  84. Performance improvement and start-up characteristics of a cyclorotor using multiple plasma actuators
  85. Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal Rotor Using an Active Control Mechanism
  86. Could thermodynamics and heat and mass transfer research produce a fundamental step advance toward and significant reduction of SARS-COV-2 spread?
  87. Numerical Simulation of the Electrostatic Coating Process: the Effect of Applied Voltage, Droplet Charge and Size on the Coating Efficiency
  88. Study of the Plasma Actuator Effect on the Flow Characteristics of an Airfoil: An LES Investigation
  89. Numerical analysis of charged droplets size distribution in the electrostatic coating process: Effect of different operational conditions
  90. Cycloidal rotor coupled with DBD plasma actuators for performance improvement
  91. A critical review on heat and mass transfer modelling of viral infection and virion evolution: The case of SARS-CoV2
  92. Numerical Analysis on the Stability Conditions of an Electrohydrodynamic Jet
  93. Atomization and spray characteristics around an ERBS using various operational models and conditions: numerical investigation
  94. Comments on “New insight into the definitions of the Bejan number”
  95. Simultaneous ice detection and removal based on dielectric barrier discharge actuators
  96. An Experimental Study on Segmented-Encapsulated Electrode Dielectric-Barrier-Discharge Plasma Actuator for Mapping Ice Formation on a Surface: A Conceptual Analysis
  97. An explicit CFD model for the DBD plasma actuators using wall-jet similarity approach
  98. Implementation of Stair-Shaped Dielectric Layers in Micro- and Macroplasma Actuators for Increased Efficiency and Lifetime
  99. Thermoelectric and solar heat pump use toward self sufficient buildings: The case of a container house
  100. Numerical modeling of the distribution of virus carrying saliva droplets during sneeze and cough
  101. Dielectric Barrier Discharge Plasma Actuators for Active Flow Control, Ice Formation Detection and Ice Accumulation Prevention
  102. Novel Propulsion System for VTOL Aircraft Based on Cycloidal Rotors Coupled With Wings
  103. Experimental Study of Dielectric Barrier Discharge Plasma Actuators for Active Flow Control
  104. 3D Unsteady RANS Computation of the Mixing on a T-junction
  105. Accounting Thermal Exchanges in Coanda Effect
  106. The influence of convective exchanges on Coandã effect
  107. ANN assisted flow modeling and analysis for a cyclorotor in ground effect
  108. Numerical modeling of electrostatic spray painting transfer processes in rotary bell cup for automotive painting
  109. CFD Analysis of Flow Structures in a Mixing Chamber
  110. Flow Modelling of Propulsion Nozzles for Nano-Satellites
  111. Plasma Actuators Optimization Using Stair Shaped Dielectric Layers
  112. Hypersonic Flow Simulation towards Space Propulsion Geometries
  113. Numerical Analysis of a Cycloidal Rotor under Diverse Operating Conditions and Altitudes
  114. Numerical Investigation of Electrostatic Spray Painting Transfer Processes for Vehicle Coating
  115. Modeling Fluid dynamics and Aerodynamics by Second Law and Bejan Number (Part 1 - Theory)
  116. Analysis and Comparison of Different Chemistry Models for the Computation of Reacting Flows on Re-entry and Hypersonic Vehicles
  117. A new plasma actuator configuration for improved efficiency: the stair-shaped dielectric barrier discharge actuator
  118. A plasma-fluid model for EHD flow in DBD actuators and experimental validation
  119. Diffusive Bejan number and second law of thermodynamics toward a new dimensionless formulation of fluid dynamics laws
  120. A new dimensionless approach to general fluid dynamics problems that accounts both the first and the second law of thermodynamics
  121. Can constructal law and exergy analysis produce a robust design method that couples with industry 4.0 paradigms? The case of a container house
  122. A Review of Propulsion Systems for CubeSats
  123. Effects of Harmonic Vibration on Cycloidal Rotor Performance
  124. Experimental Analysis of Alternative Dielectric Materials for DBD Plasma Actuators
  125. Numerical Analysis of a Multi-Species MHD Model for Plasma Layer Control of Re-Entry Vehicles
  126. Disc Turbine for Energy Harvesting
  127. Safety Analysis of an Airship Which Loses Lifting Gas from the Hull
  128. Aeroelastic Analysis of a Cycloidal Rotor Under Various Operating Conditions
  129. Comparison of DBD plasma actuators flow control authority in different modes of actuation
  130. Development of the Concept vs Prototyping: Implementation of a real scale Water-Energy Integrated System
  131. Study of a Water-Energy Integrated System: Challenges of Prototyping
  132. Numerical Modeling of Stall and Poststall Events of a Single Pitching Blade of a Cycloidal Rotor
  133. Experimental Analysis of Dielectric Barrier Discharge Plasma Actuators Thermal Characteristics Under External Flow Influence
  134. Heat generation mechanisms of DBD plasma actuators
  135. Assessment of RANS turbulence models for numerical study of laminar-turbulent transition in convection heat transfer
  136. Experimental Thermal Characterization of DBD Plasma Actuators
  137. A New VTOL Propelled Wing for Flying Cars: Critical Bibliographic Analysis
  138. Control, Propulsion and Energy Assessment of a Spherical UAS for Low Speed Operations
  139. Low-power smart sensing in energy and water systems integration
  140. An Insight into the Coanda Flow Through Mathematical Modeling
  141. Nascent Entrepreneurs' Motivations in European Economies: A Gender Approach Using GEM Data
  142. A New Propelled Wing Aircraft Configuration
  143. Analysis of Innovative Plasma Actuator Geometries for Boundary Layer Control
  144. Optimized Modular Design for Energy Efficiency: The Case of an Innovative Electric Hybrid Vehicle Design
  145. Design of an Innovative Off Road Hybrid Vehicle by Energy Efficiency Criteria
  146. Thermodynamic Analysis and Preliminary Design of the Cooling System of a Pulsejet for Aeronautic Propulsion
  147. Temperature Oscillations in the Wall of a Cooled Multi Pulsejet Propeller for Aeronautic Propulsion
  148. Parametric Analysis of a Large-Scale Cycloidal Rotor in Hovering Conditions
  149. A comparison of post-stall models extended for propeller performance prediction
  150. XFOIL vs CFD performance predictions for high lift low Reynolds number airfoils
  151. Constructal Design of an Entropic Wall With Circulating Water Inside
  152. Implementation of the classical plasma–fluid model for simulation of dielectric barrier discharge (DBD) actuators in OpenFOAM
  153. A new aircraft architecture based on the ACHEON Coanda effect nozzle: flight model and energy evaluation
  154. Geometrical Parameters Influencing the Aerodynamic Efficiency of a Small-Scale Self-Pitch High-Solidity VAWT
  155. Aerodynamic optimization of cyclorotors
  156. Computational Fluid Dynamic Study on a Novel Propulsive System: ACHEON and Its Integration with an Unmanned Aerial Vehicle (UAV)
  157. 3D Effects in Cyclorotor Propulsion Systems
  158. MAAT Cruiser/Feeder Airship Design: Intrinsic Stability and Energetic Flight Model
  159. Numerical Analysis of Design Parameters With Strong Influence on the Aerodynamic Efficiency of a Small-Scale Self-Pitch VAWT
  160. Plasma Actuators for Boundary Layer Control of Next Generation Nozzles
  161. Turbulent transition modeling through mechanical considerations
  162. Energy Self Sufficient Aircrafts Can Become Reality through New Propulsion Design Approaches
  163. Multifunctional Unmanned Reconnaissance Aircraft for Low-Speed and STOL Operations
  164. Preliminary Implementation Study of ACHEON Thrust and Vector Electrical Propulsion on a STOL Light Utility Aircraft
  165. High altitude propeller design and analysis
  166. Analysis of transitional flow in 3D geometries using a novel phenomenological model
  167. Numerical analysis of real gas MHD flow on two-dimensional self-field MPD thrusters
  168. Analytical modeling of a cyclorotor in hovering state
  169. Numerical design and analysis of a multi-DBD actuator configuration for the experimental testing of ACHEON nozzle model
  170. Validation of New Formulations for Propeller Analysis
  171. Prevention and Risk Management in RTD European Projects Developed by University-Company's Consortiums
  172. Unsteady Interaction Effects Between an Airship and Its Air-Jet Propulsion System
  173. Cycloidal Rotor Propulsion System With Plasma Enhanced Aerodynamics
  174. Exist Flow Vector Control on a Coanda Nozzle Using Dielectric Barrier Discharge Actuator
  175. Wind Energy Production Using an Optimized Variable Pitch Vertical Axis Rotor
  176. Two-dimensional numerical modeling of interaction of micro-shock wave generated by nanosecond plasma actuators and transonic flow
  177. A pressure-based high resolution numerical method for resistive MHD
  178. Roto-Cycloid Propelled Airship Dimensioning and Energetic Equilibrium
  179. Modified split-potential model for modeling the effect of DBD plasma actuators in high altitude flow control
  180. PECyT - Plasma Enhanced Cycloidal Thruster
  181. Aerodynamic and Aeroelastic Analysis of a Cycloidal Rotor
  182. Numerical modeling of coanda effect in a novel propulsive system
  183. MAAT – Promising innovative design and green propulsive concept for future airship's transport
  184. Analysis of PEM (Polymer Electrolyte Membrane) fuel cell cathode two-dimensional modeling
  185. The Influence of Surface Temperature on Coanda Effect
  186. Analytic Model Able to Assist in Parametric Design of Cycloidal Rotor Thrusters
  187. Numerical Modelling of Electrode Geometry Effects on a 2D Self-Field MPD Thruster
  188. Thermojet: An Old Idea Can Define a Novel Family of Jets
  189. Analytical Modeling of a Cyclorotor in Forward Flight
  190. High Altitude Transitional Flow Computation for a Propulsion System Nacelle of MAAT Airship
  191. Numerical Modeling of Turbulent Transitional MHD Flow for Boundary Layer Control
  192. Full Range Airfoil Polars for Propeller Blade Element Momentum Analysis
  193. JBLADE: a Propeller Design and Analysis Code
  194. Modeling of hypersonic flow on a MPD thruster geometry using a PISO based method
  195. A pressure-based method with AUSM-type fluxes for MHD flows at arbitrary Mach numbers
  196. A review of thrust-vectoring in support of a V/STOL non-moving mechanical propulsion system
  197. A Novel Look at the Performance of the Cyclorotor Propulsion System for Air Vehicles
  198. Acheon Project: A Novel Vectoring Jet Concept
  199. CFD Analysis and Optimization of a Variable Shape Airship
  200. Numerical Research on Efficiency Performance of the Propulsion System for an Innovative Airship
  201. Overcoming Stopovers in Cycloidal Rotor Propulsion Integration on Air Vehicles
  202. An innovative experimental on-road testing method and its demonstration on a prototype vehicle
  203. Fire-safe Airship System Design
  204. A critical review of propulsion concepts for modern airships
  205. A hybrid pressure-density-based algorithm for the Euler equations at all Mach number regimes
  206. Three-dimensional effects of curved plasma actuators in quiescent air
  207. Benchmark test cases for CFD in mechanical engineering
  208. Accuracy details in realistic CFD modeling of an industrial centrifugal pump in direct and reverse modes
  209. Performance assessment limits in transonic 3D turbine stage blade rows using a mixing-plane approach
  210. A fast iterative inverse method for turbomachinery blade design
  211. Simulation of the aerodynamic behaviour of a micro wind turbine
  212. Redesigning Annular Turbine Blade Rows Using a Viscous-Inviscid Inverse Design Method
  213. Turbine Blade Duty Re-Design by Controlling Lean and Sweep Using an Innovative Iterative Inverse Design Method