Contact

All Stories

  1. Factorial Optimization of Secondary Annealing Parameters for Enhanced Magnetic Performance in M4 Grain-Oriented Electrical Steel Toroidal Cores

    Article • Materials, May 2026, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  2. Synergistic Effect of Waste Glass Powder and Metakaolin on the Microstructure and Mechanical Performance of Cement-Based Pastes and Mortars

    Article • Materials, March 2026, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  3. Academia-Industry-Defense Successful Partnership Case Study in Mexico: FX05 Rifle

    Article • January 2026, Bentham Science Publishers

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  4. Laboratory Quantification of Gaseous Emission from Alternative Fuel Combustion: Implications for Cement Industry Decarbonization

    Article • Materials, October 2025, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  5. Mechanical and Microstructural Behavior of Aluminum Matrix Composites Reinforced with Silicon Carbide Particles

    Article • Metallography Microstructure and Analysis, September 2025, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  6. Elastoplastic Modeling of Kevlar® Composite Laminates: A Cyclic Loading Approach for In-Plane Characterization

    Article • Polymers, August 2025, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  7. Improving Durability and Compressive Strength of Concrete with Rhyolite Aggregates and Recycled Supplementary Cementitious Materials

    Article • Buildings, June 2025, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  8. Advanced Biomaterial Design: Optimizing Porous Titanium with Hydroxyapatite Coating for Improved Joint Prosthesis Performance and Bone Integration

    Article • Processes, June 2025, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  9. Nuevas Alternativas para Producir Cemento de Manera más Sostenible

    Article • Energías Renovables, May 2025, Asociación Nacional de Energía Solar

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  10. Thermal Behavior and Gas Emissions of Biomass and Industrial Wastes as Alternative Fuels in Cement Production: A TGA-DSC and TGA-MS Approach

    Article • Energies, May 2025, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  11. Tagetes erecta—Mediated Green Synthesis of ZnO–Ag Nanocomposites: Characterization and Dual Applications in Solar Photocatalytic Degradation and Antibacterial Activity

    Article • Ceramics, April 2025, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  12. Sustainable Low-Carbon Cement: Performance Enhancement with Calcined Natural Pozzolans Through Compressive Strength, Porosity, and Microstructural Analysis

    Article • Materials, April 2025, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  13. Multifunctional characterization of cement- Sargassum composites for application as bioconstruction materials

    Article • Journal of Building Physics, September 2024, SAGE Publications

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  14. Increasing the Hardness of Aluminum Alloys Used in the Aerospace Industry by Recycling Lithium Batteries

    Article • Microscopy and Microanalysis, July 2024, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  15. Sintering of Porous Titanium Using the Spark Plasma Sintering Technique for Application as a Joint Prosthesis

    Article • Microscopy and Microanalysis, July 2024, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  16. Valorization of Biomass and Industrial Wastes as Alternative Fuels for Sustainable Cement Production

    Article • Clean Technologies, June 2024, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  17. In-Plane Mechanical Characterization of a Kevlar® Composite

    Article • Fibers, April 2024, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  18. In-Plane Mechanical Characterization of a Kevlar® Composite

    Article • February 2024, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  19. Potential Use of Polyvinyl Alcohol as an Effective Inclusion Vehicle of Thermally Reduced Graphene Oxides in Nanoreinforced Aluminum Matrix Composites

    Article • Journal of Engineering Materials and Technology, September 2023, ASME International

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  20. Analysis of Aluminum-Based Metal Matrix Composite Reinforced with SiC Particles Studied by Scanning Electron Microscopy

    Article • Microscopy and Microanalysis, July 2023, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  21. Electron Microscopy Characterization of Bursera cuneata Schltdl Residues for its Application as Solid Biofuel

    Article • Microscopy and Microanalysis, July 2023, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  22. High Yield Stress Obtained from the Fabrication of a Composite Material, Ti-MWCNTs/Al

    Article • Microscopy and Microanalysis, July 2023, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  23. TEM In-situ Deformation Study of Magnesium Reinforced with Carbon Nanotubes by Bending Test

    Article • Microscopy and Microanalysis, July 2023, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  24. The Effect of Space Holder Size on the Mechanical Properties of Porous Titanium

    Article • Microscopy and Microanalysis, July 2023, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  25. Interfacial Phenomena in Multiwalled Carbon Nanotube-Reinforced Magnesium Nanocomposite Synthesized by the Sandwich Technique

    Article • Metallography Microstructure and Analysis, June 2023, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  26. Photocatalytic activity of ZnO nanoparticles synthesized from zinc nitrate and botanical extracts of neem, chrysanthemum, Mexican marigold and shiitake mushroom

    Article • Journal of Chemical Technology & Biotechnology, January 2023, Wiley

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  27. Tensile flow behavior of AA7075–Ag/C composites evaluated by the Hollomon and Voce equations

    Article • Advanced Powder Technology, December 2022, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  28. Mg-Ni-Nb2O5 Composite Produced by High-Pressure Torsion

    Article • Metals, October 2022, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  29. Development of an Aluminum Hybrid Metal Matrix Composite Processed Through Mechanical Milling (MM), with High Response to Yield Strength

    Article • Microscopy and Microanalysis, August 2022, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  30. High Purity Graphene Prepared Via a Cheap Method of Synthesis from a CO2 Atmosphere

    Article • Microscopy and Microanalysis, August 2022, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  31. Dispersion Analysis of Silicon Carbide Nanoparticles in Polyvinyl Alcohol Polymeric Matrix by Electronic Microscopy Techniques

    Article • Microscopy and Microanalysis, July 2022, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  32. Fracture behavior in micro-cantilever beam and tension tests for Mg/CNT composites synthesized by the sandwich technique

    Article • MRS Communications, July 2022, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  33. Theoretical and Experimental Study of CaMgSi Thermoelectric Properties

    Article • ACS Omega, April 2022, American Chemical Society (ACS)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  34. Sustainable Biocomposites for Structural Applications with Environmental Affinity

    Article • ACS Applied Materials & Interfaces, April 2022, American Chemical Society (ACS)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  35. Designing Small Weapons

    Article • April 2022, Taylor & Francis

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  36. Turbostratic Carbon/Graphene Prepared via the Dry Ice in Flames Method and Its Purification Using Different Routes: A Comparative Study

    Article • Materials, March 2022, MDPI AG

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  37. Hybrid Cements with ZnO Additions: Hydration, Compressive Strength and Microstructure

    Article • Molecules, February 2022, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  38. Graphene Prepared via the Dry Ice in Flames Method and its Purification Using Different Routes: A Comparative Study

    Article • January 2022, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  39. Glass–Ceramic Protective Coating for Satellite System as a Thermal Insulator

    Article • January 2022, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  40. Sunlight Photocatalytic Performance of ZnO Nanoparticles Synthesized by Green Chemistry Using Different Botanical Extracts and Zinc Acetate as a Precursor

    Article • Molecules, December 2021, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  41. Microstructure and microhardness of high entropy alloys with Zn addition: AlCoFeNiZn and AlCoFeNiMoTiZn

    Article • Advanced Powder Technology, December 2021, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  42. Graphene Prepared via the Dry Ice in Flames Method and Its Purification Using Different Routes: A Comparative Study

    Article • October 2021, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  43. Low-temperature hydrogenation of Mg-Ni-Nb2O5 alloy processed by high-pressure torsion

    Article • Journal of Alloys and Compounds, October 2021, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  44. Dark-field TEM study of the microstructural behavior in AZ31B/MWCNTs composites produced by the sandwich technique

    Article • Microscopy and Microanalysis, July 2021, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  45. Development of a porous titanium-base biomaterial with modulus of elasticity close to that of bone structure

    Article • Microscopy and Microanalysis, July 2021, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  46. Removal of MgO impurity crystals by mechanical milling exfoliation of graphene obtained by CO2 atmosphere synthesis method.

    Article • Microscopy and Microanalysis, July 2021, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  47. Effect of zinc oxide on the hydration, microstructure and compressive strength of ternary mixtures

    Article • Magazine of Concrete Research, April 2021, Emerald

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  48. Formation of a metastable fcc phase and high Mg solubility in the Ti-Mg system by mechanical alloying

    Article • Powder Technology, September 2020, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  49. Fabrication of Al2024 Alloy by Core-shell Structured Ti/B4C Composite Particles

    Article • Microscopy and Microanalysis, July 2020, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  50. Metastable fcc Structure of Ti-Mg Alloy Synthesized by Mechanical Alloying

    Article • Microscopy and Microanalysis, July 2020, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  51. Strengthening of an Al 7075 Alloy with Graphene Synthetized by an Environmental Friendly Method

    Article • Microscopy and Microanalysis, July 2020, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  52. Microstructural Behavior of the Intermetallic Compound CaMgSi Synthesized by Mechanical Milling and Spark Plasma Sintering

    Article • Microscopy and Microanalysis, July 2020, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  53. High ionic conductivity dysprosium and tantalum Co-doped bismuth oxide electrolyte for low-temperature SOFCs

    Article • Ionics, May 2020, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  54. Mechanical and Corrosion Behavior of Plasma Electrolytic Oxidation Coatings on AZ31B Mg Alloy Reinforced with Multiwalled Carbon Nanotubes

    Article • Journal of Materials Engineering and Performance, February 2020, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  55. Unconventional Techniques for the Production of Light Alloys and Composites

    Article • January 2020, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  56. Improvement of physical and mechanical properties on bio-polymer matrix composites using morphed graphene

    Article • Composites Science and Technology, November 2019, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  57. Exploring the Reinforcing Effect of AgcNP and Al2O3NP in Aluminum Alloy 2024 Matrix Composites

    Article • Microscopy and Microanalysis, August 2019, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  58. Improvement of Mechanical Properties of an Aluminum Alloy 7075 by Adding Reduced Graphene Oxide Trough Mechanical Milling

    Article • Microscopy and Microanalysis, August 2019, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  59. Interfacial Analysis in AZ31B Magnesium Alloy Reinforced with Multiwalled Carbon Nanotubes

    Article • Microscopy and Microanalysis, August 2019, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  60. Electrochemical Study, Structural Characterization and Antimicrobial Activity of Silver and Copper Oxide (CuO) Nanoparticles Synthesized by a Green Method Using L-ascorbic Acid and Chitosan

    Article • International Journal of Electrochemical Science, July 2019, Elsevier

    Maribel Jiménez Edeza, Dr. JOSE MARTIN HERRERA-RAMIREZ

  61. ADV volume 4 issue 57-58 Cover and Front matter

    Article • MRS Advances, January 2019, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  62. Mechanical Behavior of Multiwalled Carbon Nanotube Reinforced 7075 Aluminum Alloy Composites Prepared by Mechanical Milling and Hot Extrusion

    Article • Materials Research, January 2019, FapUNIFESP (SciELO)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  63. An Overview of the Synthesis, Characterization, and Applications of Carbon Nanotubes

    Article • January 2019, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  64. B4C Particles Reinforced Al2024 Composites via Mechanical Milling

    Article • Metals, August 2018, MDPI AG

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  65. Fabrication of Multilayer Graphene by an Environment-friendly Synthesis of Metallic Magnesium and Carbon Dioxide Combined in a Chemical Reaction

    Article • Microscopy and Microanalysis, August 2018, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  66. Graphene as reinforcement agent in aluminum alloy 7075 matrix composite by using mechanical milling

    Article • Microscopy and Microanalysis, August 2018, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  67. In the CO2 emission remediation by means of alternative geopolymers as substitutes for cements

    Article • Journal of Environmental Chemical Engineering, August 2018, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  68. THEORETICAL AND EXPERIMENTAL STUDY OF DIFFERENT CHEMICAL ROUTES TO SYNTHESIZE CRYSTALLINE SODIUM METASILICATE FROM SILICA-RICH SAND

    Article • Revista Mexicana de Ingeniería Química, July 2018, Universidad Autonoma Metropolitana

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  69. Room-temperature synthesis of χ-Al2O3 and ruby (α-Cr:Al2O3)

    Article • CrystEngComm, January 2018, Royal Society of Chemistry

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  70. Dispersion and alignment quantification of carbon nanotubes in a polyvinyl alcohol matrix

    Article • Journal of Composite Materials, September 2017, SAGE Publications

    M. En. Cesar A. Isaza, Dr. JOSE MARTIN HERRERA-RAMIREZ

  71. Mechanical Behavior on Microstructure of B4C Particles Reinforced 2024 Aluminum Matrix Composite Obtained by Mechanical Milling

    Article • Microscopy and Microanalysis, July 2017, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  72. The effect of fullerene soot on the mechanical properties of chitosan

    Article • Microscopy and Microanalysis, July 2017, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  73. Characterization of Metal Matrix Composites Reinforced with Carbon Nanotubes by High Resolution Transmission Electron Microscopy

    Article • Microscopy and Microanalysis, July 2017, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  74. Effect of Multiwall Carbon Nanotubes (MWCNs) Reinforcement on the Mechanical Behavior of Synthesis 7075 Aluminum Alloy Composites by Mechanical Milling

    Article • Microscopy and Microanalysis, July 2017, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  75. Microstructural Characterization of Inconel 718 for Aeronautical Use

    Article • Microscopy and Microanalysis, July 2017, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  76. Synthesis and Characterization of Carbon Nanotubes Via Spray Pyrolysis Method

    Article • Microscopy and Microanalysis, July 2017, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  77. Metal matrix composites reinforced with carbon nanotubes by an alternative technique

    Article • Journal of Alloys and Compounds, June 2017, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  78. Al-Si Alloys

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  79. Al-Si Alloys, Minor, Major, and Impurity Elements

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  80. Applications in the Automotive and Aerospace Industries

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  81. Erratum to: Al-Si Alloys: Automotive, Aeronautical, and Aerospace Applications

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  82. Grain Refinement

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  83. Liquid and Semisolid Melt Treatment: Electromagnetic Stirring

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  84. Mechanical Properties

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  85. Metal Casting Process

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  86. Powder Metallurgy

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  87. Principles of Solidification

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  88. Thermal Analysis

    Article • January 2017, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  89. Mechanical properties and interfacial phenomena in aluminum reinforced with carbon nanotubes manufactured by the sandwich technique

    Article • Journal of Composite Materials, July 2016, SAGE Publications

    M. En. Cesar A. Isaza, Dr. JOSE MARTIN HERRERA-RAMIREZ

  90. Mechanical properties of aluminum 7075 – Silver nanoparticles powder composite and its relationship with the powder particle size

    Article • Advanced Powder Technology, July 2016, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  91. Wear resistance analysis of the aluminum 7075 alloy and the nanostructured aluminum 7075 - silver nanoparticles composites

    Article • Journal of Mining and Metallurgy Section B Metallurgy, January 2016, National Library of Serbia

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  92. Microstructural evolution of mechanically alloyed Ni-based alloys under high temperature oxidation

    Article • Powder Technology, September 2015, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  93. Simultaneous effect of mechanical alloying and arc-melting processes in the microstructure and hardness of an AlCoFeMoNiTi high-entropy alloy

    Article • Journal of Alloys and Compounds, September 2015, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  94. Characterization of Precipitate Phases in a NiCoAlFeCrTi High Entropy Alloy by Transmission Electron Microscopy

    Article • Microscopy and Microanalysis, August 2015, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  95. Influence of Size on the Microstructure and Mechanical Properties of an AISI 304L Stainless Steel—A Comparison between Bulk and Fibers

    Article • Materials, January 2015, MDPI AG

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  96. Effect of Cr, Mo and Ti on the microstructure and Vickers hardness of multi-component systems

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  97. Microstructural and magnetic behavior of an equiatomic NiCoAlFe alloy prepared by mechanical alloying

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  98. Equiatomic NiCoAlFeMoTiCrx (x= 0,1) High Entropy Alloys Produced by Mechanical Alloying

    Article • Microscopy and Microanalysis, August 2014, Oxford University Press (OUP)

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  99. Cement-Matrix Composites Reinforced with Carbon Fibers as a Multifunctional Material

    Article • Microscopy and Microanalysis, August 2014, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  100. Nanohardness and Microstructure of NiCoAlFeCu and NiCoAlFeCuCr Alloys Produced by Mechanical Alloying

    Article • Microscopy and Microanalysis, August 2014, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  101. Influence of continuous plastic fibers reinforcement arrangement in concrete strengthened

    Article • IOSR Journal of Engineering, April 2014, IOSR Journals

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  102. Prediction Model of Deflections in PET Fiber Reinforced Concrete Beams

    Article • MRS Proceedings, January 2014, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  103. Structural characterization of aluminium alloy 7075–graphite composites fabricated by mechanical alloying and hot extrusion

    Article • Materials & Design (1980-2015), January 2014, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  104. Mechanical Properties of Silicon Carbide Fibers by Spherical Indentation Technique

    Article • Microscopy and Microanalysis, August 2013, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  105. Performance of PET post-consume bottle fiber into a concrete matrix

    Article • Microscopy and Microanalysis, August 2013, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  106. AA2024–CNTs composites by milling process after T6-temper condition

    Article • Journal of Alloys and Compounds, September 2012, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  107. Characterization of Kevlar-29 fibers by tensile tests and nanoindentation

    Article • Journal of Alloys and Compounds, September 2012, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  108. Characterization of a Ni-Co-Cr-Al bond coat produced by mechanical alloying

    Article • Microscopy and Microanalysis, July 2012, Oxford University Press (OUP)

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  109. NiCoAlFeCrTi High Entropy Alloys Produced In Solid State.

    Article • Microscopy and Microanalysis, July 2012, Oxford University Press (OUP)

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  110. Microstructural and Mechanical Properties of a 304 Stainless Steel Fiber

    Article • Microscopy and Microanalysis, July 2012, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  111. Microstructure Evolution in 2024 Aluminum Alloy Produced by Mechanical Alloying

    Article • Microscopy and Microanalysis, July 2012, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  112. Modification of the Kevlar-29 fibers tensile properties after a brine (NaCl) treatment

    Article • Microscopy and Microanalysis, July 2012, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  113. Structural and Mechanical Characterization of Hi-Nicalon Fibers

    Article • Microscopy and Microanalysis, July 2012, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  114. The Tensile Behavior of E-glass fibers

    Article • Microscopy and Microanalysis, July 2012, Oxford University Press (OUP)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  115. Microstructure and mechanical properties of 7075 aluminum alloy nanostructured composites processed by mechanical milling and indirect hot extrusion

    Article • Materials Characterization, January 2012, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  116. Characterization of Al2024-CNTs composites produced by mechanical alloying

    Article • Powder Technology, October 2011, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  117. Dispersion of CNTs in Aluminum 2024 Alloy by Milling Process

    Article • Materials Science Forum, June 2011, Trans Tech Publications

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  118. Mechanical Study on Al-based Composites Synthesized by Mechanical Milling and Hot Extrusion

    Article • Materials Science Forum, June 2011, Trans Tech Publications

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  119. Microstructure of NiCoAlFeCuCr multi-component systems synthesized by mechanical alloying

    Article • Journal of Alloys and Compounds, June 2011, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  120. Synthesis of aluminum alloy 7075-graphite composites by milling processes and hot extrusion

    Article • Journal of Alloys and Compounds, June 2011, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  121. Effect of metallic addition on mechanical properties in an aluminum–graphite composite synthesized by means of mechanical milling

    Article • Journal of Alloys and Compounds, April 2010, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  122. Microstructural and mechanical characterization in 7075 aluminum alloy reinforced by silver nanoparticles dispersion

    Article • Journal of Alloys and Compounds, April 2010, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  123. Microstructural characterization of Al-MWCNT composites produced by mechanical milling and hot extrusion

    Article • Journal of Alloys and Compounds, April 2010, Elsevier

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  124. TEM Characterization on the Nanocomposite Al 7075 and Silver Nanoparticles Synthesized by Powder Metallurgy

    Article • Materials Science Forum, March 2010, Trans Tech Publications

    Dr Ivanovich Estrada, Dr. JOSE MARTIN HERRERA-RAMIREZ

  125. ACQUISITION OF CORNEAL ELECTRICAL SIGNALS BY A SIMPLE METHOD

    Article • Telecommunications and Radio Engineering, January 2010, Begell House

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  126. Strengthening phases in the production of Al2024-CNTs composites by a milling process

    Article • MRS Proceedings, January 2010, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  127. Acquisition of corneal electrical signals

    Article • November 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  128. Microstructural Mechanisms of Fatigue Failure in PA66 Fibers

    Article • November 2007, CrossRef Test Account

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  129. Micro-Raman study of the fatigue and fracture behaviour of single PA66 fibres: Comparison with single PET and PP fibres

    Article • Engineering Fracture Mechanics, November 2006, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  130. Microstructural mechanisms governing the fatigue failure of polyamide 66 fibres

    Article • Journal of Materials Science, October 2006, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  131. Fracture initiation revealed by variations in the fatigue fracture morphologies of PA 66 and PET fibers

    Article • Journal of Materials Science, March 2005, Springer Science + Business Media

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  132. Micro-Raman study of the compressive behaviour of advanced PA66 polyamide fibres in a diamond-anvil cell

    Article • Vibrational Spectroscopy, January 2005, Elsevier

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  133. Micro‐Raman study of the fatigue fracture and tensile behaviour of polyamide (PA 66) fibres

    Article • Journal of Raman Spectroscopy, November 2004, Wiley

    Dr. JOSE MARTIN HERRERA-RAMIREZ

  134. Fe-Ti(O,N) Composites Produced from Mechanically Alloyed Powders

    Article • Journal of Metastable and Nanocrystalline Materials, April 2003, Trans Tech Publications

    Dr. JOSE MARTIN HERRERA-RAMIREZ