All Stories

  1. Role of Pd nanoparticles in gas sensing behaviour of Pd@In2O3 yolk–shell nanoreactors
  2. Highly reversible switching from P- to N-type NO2 sensing in a monolayer Fe2O3 inverse opal film and the associated P–N transition phase diagram
  3. Synthesis of plasmonic Ag@SnO2 core–shell nanoreactors for xylene detection
  4. Noble metal@metal oxide semiconductor core@shell nano-architectures as a new platform for gas sensor applications
  5. Local impedance spectroscopic and microstructural analyses of Al-in-diffused Li7La3Zr2O12
  6. Ultraselective and ultrasensitive detection of trimethylamine using MoO3 nanoplates prepared by ultrasonic spray pyrolysis
  7. CeO2 quantum dot functionalized ZnO nanorods photoanode for DSSC applications
  8. Effect of sintering atmosphere on phase stability, and electrical conductivity of proton-conducting Ba(Zr0.84Y0.15Cu0.01)O3−
  9. Ultraselective and ultrasensitive detection of H2S in highly humid atmosphere using CuO-loaded SnO2 hollow spheres for real-time diagnosis of halitosis
  10. Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
  11. One‐Pot Synthesis of Pd‐Loaded SnO2 Yolk–Shell Nanostructures for Ultraselective Methyl Benzene Sensors
  12. Selective, sensitive, and reversible detection of H2S using Mo-doped ZnO nanowire network sensors
  13. High performance chemiresistive H2S sensors using Ag-loaded SnO2 yolk–shell nanostructures
  14. Impedance spectroscopic analysis on effects of partial oxidation of TiN bottom electrode and microstructure of amorphous and crystalline HfO2 thin films on their bipolar resistive switching
  15. Characterization and Synthesis of Additive Coated BaTiO3 Nano-Powder
  16. Functionalization of ZnO nanorods by CuO nanospikes for gas sensor applications
  17. Design of highly sensitive and selective Au@NiO yolk–shell nanoreactors for gas sensor applications
  18. Rh-catalyzed WO3 with anomalous humidity dependence of gas sensing characteristics
  19. Fabrication and characterization of Ba(Zr0.84Y0.15Cu0.01)O3 electrolyte-based protonic ceramic fuel cells
  20. Extremely Sensitive and Selective NO Probe Based on Villi-like WO3 Nanostructures for Application to Exhaled Breath Analyzers
  21. Electronic sensitization of the response to C2H5OH of p-type NiO nanofibers by Fe doping
  22. Determination of proton transference number of Ba(Zr0.84Y0.15Cu0.01)O3−δ via electrochemical concentration cell test
  23. Ambivalent effect of Ni loading on gas sensing performance in SnO2 based gas sensor
  24. Sensors: Thin‐Wall Assembled SnO2 Fibers Functionalized by Catalytic Pt Nanoparticles and their Superior Exhaled‐Breath‐Sensing Properties for the Diagnosis of Diabetes (Adv. Funct. Mater. 19/2013)
  25. Selective and sensitive detection of trimethylamine using ZnO–In2O3 composite nanofibers
  26. Channel access resistance effects on charge carrier mobility and low-frequency noise in a polymethyl methacrylate passivated SnO2 nanowire field-effect transistors
  27. One-pot rapid synthesis of core–shell structured NiO@TiO2 nanopowders and their excellent electrochemical properties as anode materials for lithium ion batteries
  28. Highly selective and sensitive detection of trimethylamine using WO3 hollow spheres prepared by ultrasonic spray pyrolysis
  29. Soft lithography of graphene sheets via surface energy modification
  30. Ultraselective and sensitive detection of xylene and toluene for monitoring indoor air pollution using Cr-doped NiO hierarchical nanostructures
  31. Thin‐Wall Assembled SnO2 Fibers Functionalized by Catalytic Pt Nanoparticles and their Superior Exhaled‐Breath‐Sensing Properties for the Diagnosis of Diabetes
  32. Transformation of ZnO Nanobelts into Single-Crystalline Mn3O4 Nanowires
  33. Punched ZnO nanobelt networks for highly sensitive gas sensors
  34. Intermediate-temperature nickel–yttria stabilized zirconia supported tubular solid oxide fuel cells using gadolinia-doped ceria electrolyte
  35. Thin Film Yttria-Stabilized Zirconia (YSZ) Electrolyte Fabricated by a Novel Chemical Solution Deposition (CSD) Process for Solid Oxide Fuel Cells (SOFCs)
  36. Self-activated ultrahigh chemosensitivity of oxide thin film nanostructures for transparent sensors
  37. One-dimensional Hollow Oxide Nanostructures: A Highly Sensitive Gas-sensing Platform
  38. Highly sensitive C2H5OH sensors using Fe-doped NiO hollow spheres
  39. Thin film yttria-stabilized zirconia electrolyte for intermediate-temperature solid oxide fuel cells (IT-SOFCs) by chemical solution deposition
  40. Selective Detection of NO2 Using Cr-Doped CuO Nanorods
  41. CdSe-sensitized inorganic–organic heterojunction solar cells: The effect of molecular dipole interface modification and surface passivation
  42. One-pot hydrothermal synthesis of CuO–ZnO composite hollow spheres for selective H2S detection
  43. Highly sensitive and selective trimethylamine sensor using one-dimensional ZnO–Cr2O3hetero-nanostructures
  44. Electrochemical properties of nanosized LiCrO2·Li2MnO3 composite powders prepared by a new concept spray pyrolysis
  45. Highly sensitive and selective trimethylamine sensors using Ru-doped SnO2 hollow spheres
  46. Fast Responsive Gas Sensor of Vertically Aligned Fluorine-Doped Tin Oxide Nanorod Thin Film
  47. Large-scale fabrication of highly sensitive SnO2 nanowire network gas sensors by single step vapor phase growth
  48. Fast Responsive Gas Sensor of Vertically Aligned Fluorine-Doped Tin Oxide Nanorod Thin Film
  49. Simple fabrication of transparent flexible devices using SnO2 nanowires and their optoelectronic properties
  50. A binder-free Ge-nanoparticle anode assembled on multiwalled carbon nanotube networks for Li-ion batteries
  51. Reduced charge fluctuations in individual SnO2 nanowires by suppressed surface reactions
  52. Design of highly sensitive volatile organic compound sensors by controlling NiO loading on ZnO nanowire networks
  53. Design of a highly sensitive and selective C2H5OH sensor using p-type Co3O4 nanofibers
  54. Controlled transformation of ZnO nanobelts into CoO/Co3O4 nanowires
  55. Chemical synthesis of CoO–ZnO:Co hetero-nanostructures and their ferromagnetism at room temperature
  56. Brush-Shaped ZnO Heteronanorods Synthesized Using Thermal-Assisted Pulsed Laser Deposition
  57. Gas Sensors: The Role of NiO Doping in Reducing the Impact of Humidity on the Performance of SnO2‐Based Gas Sensors: Synthesis Strategies, and Phenomenological and Spectroscopic Studies (Adv. Funct. Mater. 23/2011)
  58. Design of Selective Gas Sensors Using Additive-Loaded In2O3 Hollow Spheres Prepared by Combinatorial Hydrothermal Reactions
  59. Design of Highly Sensitive C2H5OH Sensors Using Self-Assembled ZnO Nanostructures
  60. ZnO-SnO2 core-shell nanowire networks and their gas sensing characteristics
  61. Preparation and Dispersion of Metal Oxide Nanostructures Using Amino Acid-Assisted Chemical Routes: An Overview
  62. The Role of NiO Doping in Reducing the Impact of Humidity on the Performance of SnO2‐Based Gas Sensors: Synthesis Strategies, and Phenomenological and Spectroscopic Studies
  63. Enhanced H2S sensing characteristics of Pt doped SnO2 nanofibers sensors with micro heater
  64. Characteristics of Li3V2(PO4)3/C powders prepared by ultrasonic spray pyrolysis
  65. Facile Control of C2H5OH Sensing Characteristics by Decorating Discrete Ag Nanoclusters on SnO2 Nanowire Networks
  66. Electron beam tuning of carrier concentrations in oxide nanowires
  67. Interface Effect of Magnetic Properties in Ni Nanoparticles with a hcp Core and fcc Shell Structure
  68. Gas sensing properties of p-type hollow NiO hemispheres prepared by polymeric colloidal templating method
  69. Enhanced C2H5OH sensing characteristics of nano-porous In2O3 hollow spheres prepared by sucrose-mediated hydrothermal reaction
  70. ZnO hierarchical nanostructures grown at room temperature and their C2H5OH sensor applications
  71. Gas sensing properties of SnO2 nanowires on micro-heater
  72. Gas Sensors Using Oxide Nanowire Networks: An Overview
  73. Micromachined catalytic combustible hydrogen gas sensor
  74. Low-temperature sintering and electrical properties of strontium- and magnesium-doped lanthanum gallate with V2O5 additive
  75. Characteristics of nanosized Bi-based glass powders prepared by flame spray pyrolysis as transparent dielectric layer material
  76. Nanosized LiMn2O4 powders prepared by flame spray pyrolysis from aqueous solution
  77. Porous CdS-sensitized electrochemical solar cells
  78. The Enhanced Gas Sensing Characteristics of La2O3-Doped SnO2 by the Addition of Multi Wall Carbon Nanotubes
  79. Selective detection of NO2 and C2H5OH using a Co3O4-decorated ZnO nanowire network sensor
  80. Microstructural control and selective C2H5OH sensing properties of Zn2SnO4 nanofibers prepared by electrospinning
  81. Thin-walled NiO tubes functionalized with catalytic Pt for highly selective C2H5OH sensors using electrospun fibers as a sacrificial template
  82. Ultrasensitive and selective C2H5OH sensors using Rh-loaded In2O3 hollow spheres
  83. Gas sensing characteristics of WO3 nanoplates prepared by acidification method
  84. Template-free solvothermal synthesis of hollow hematite spheres and their applications in gas sensors and Li-ion batteries
  85. Properties of La0.8Sr0.2Ga0.8Mg0.2O2.8 electrolyte formed from the nano-sized powders prepared by spray pyrolysis
  86. Phase evolution of perovskite LaNiO3nanofibers for supercapacitor application and p-type gas sensing properties of LaOCl–NiO composite nanofibers
  87. Conductive silver films formed from nano-sized silver powders prepared by flame spray pyrolysis
  88. Degradation pattern of SnO2nanowire field effect transistors
  89. CdSe/Zns-QD Incorporated Microbeads for Ultra-sensitive Chemo-sensor Applications
  90. Diffusion induced grain-boundary migration in SrO-doped CeO2 electrolyte and its effect on electrical properties
  91. Effect of oxide additives on the sintering behavior and electrical properties of strontium- and magnesium-doped lanthanum gallate
  92. Design of selective gas sensors using electrospun Pd-doped SnO2 hollow nanofibers
  93. Fine size (Y,Gd)BO3:Eu phosphor powders prepared from precursor powders with hollow shape and large size
  94. Synthesis and gas sensing characteristics of highly crystalline ZnO–SnO2 core–shell nanowires
  95. Performance enhancement through post-treatments of CdS-sensitized solar cells fabricated by spray pyrolysis deposition
  96. C2H5OH sensing characteristics of various Co3O4 nanostructures prepared by solvothermal reaction
  97. Characteristics of samaria-doped ceria nanoparticles prepared by spray pyrolysis
  98. Effects of oxygen incorporation in GeSbTe films on electrical properties and thermal stability
  99. Ultra-fast responding and recovering C2H5OH sensors using SnO2 hollow spheres prepared and activated by Ni templates
  100. Enhanced dielectric constant of polymer-matrix composites using nano-BaTiO3 agglomerates
  101. Detection of CO and NH3 mixed gas using single-walled carbon nanotubes
  102. Preparation of La0.75Sr0.25Cr0.5Mn0.5O3−δ fine powders by carbonate coprecipitation for solid oxide fuel cells
  103. SiO[sub 2]-Tolerant Grain-Boundary Conduction in Sr- and Mg-Doped Lanthanum Gallate
  104. Firing characteristics of La0.8Sr0.2Ga0.8Mg0.2O3−δ electrolyte powders prepared by spray pyrolysis
  105. Glucose-mediated hydrothermal synthesis and gas sensing characteristics of WO3 hollow microspheres
  106. Enhanced H2S sensing characteristics of SnO2 nanowires functionalized with CuO
  107. Necked ZnO nanoparticle-based NO2 sensors with high and fast response
  108. Preparation of LSGM powders for low temperature sintering
  109. Gas sensors using hierarchical and hollow oxide nanostructures: Overview
  110. Microfluidic Devices Fabricated by LTCC Combined with Thick Film Lithography
  111. Enhanced CO sensing characteristics of hierarchical and hollow In2O3 microspheres
  112. Solvent-free infiltration method for mesoporous SnO2 using mesoporous silica templates
  113. Highly resistive intergranular phases in solid electrolytes: an overview
  114. Gas sensing characteristics of polycrystalline SnO2 nanowires prepared by polyol method
  115. A facile fabrication of semiconductor nanowires gas sensor using PDMS patterning and solution deposition
  116. Highly sensitive and ultra-fast responding gas sensors using self-assembled hierarchical SnO2 spheres
  117. Design of Selective Gas Sensors Using Combinatorial Solution Deposition of Oxide Semiconductor Films
  118. Improvement of Grain-Boundary Conduction in SiO[sub 2]-Doped GDC by BaO Addition
  119. Grain-Boundary Conduction in Gadolinia-Doped Ceria: The Effect of SrO Addition
  120. The Preparation of SnO2 Powders Using Polyol Process and Its Gas Sensing Characteristics
  121. CuO nanowire gas sensors for air quality control in automotive cabin
  122. Grain-boundary plane orientation dependence of electrical barriers at Σ5 boundaries in SrTiO3
  123. Millicontact impedance spectroscopic analysis in stabilized zirconia and gadolinia-doped ceria
  124. Effect of CaO concentration on enhancement of grain-boundary conduction in gadolinia-doped ceria
  125. Growth mechanism of In(OH)3 nanocubes during hydrothermal reaction
  126. Enhanced performance of SnO2 nanowires ethanol sensor by functionalizing with La2O3
  127. Preparation of multi-compositional gas sensing films by combinatorial solution deposition
  128. Highly sensitive and fast responding CO sensor using SnO2 nanosheets
  129. Novel fabrication of an SnO2nanowire gas sensor with high sensitivity
  130. Microstructural evolution and dielectric properties of Cu-deficient and Cu-excess CaCu3Ti4O12 ceramics
  131. Microstructure and electrical properties of nano-sized Ce1-xGdxO2 (0 ≤ x ≤ 0.2) particles prepared by spray pyrolysis
  132. Enhancement of grain-boundary conduction in gadolinia-doped ceria by the scavenging of highly resistive siliceous phase
  133. Improvement of dynamic gas sensing behavior of SnO2 acicular particles by microwave calcination
  134. The selective detection of C2H5OH using SnO2–ZnO thin film gas sensors prepared by combinatorial solution deposition
  135. Change in electrical resistance and thermal stability of nitrogen incorporated Ge2Sb2Te5 films
  136. Improvement of translucency in Al2O3 ceramics by two-step sintering technique
  137. Microstructural evolution and dielectric properties of SiO2-doped CaCu3Ti4O12 ceramics
  138. Mitigation of Highly Resistive Grain-Boundary Phase in Gadolinia-Doped Ceria by the Addition of SrO
  139. Preparation of SnO2 whiskers via the decomposition of tin oxalate
  140. NO2 sensing characteristics of ZnO nanorods prepared by hydrothermal method
  141. Preparation of mono-disperse Ni powders via the reduction of hydrazine complexes: The effect of source materials and impurities
  142. CO sensing performance in micro-arc oxidized TiO2 films for air quality control
  143. Microstructure and piezoelectric properties of 0.95(Na0.5K0.5)NbO3–0.05BaTiO3 ceramics
  144. Nano Magnetite Particles Prepared under the Combined Addition of Urea and Ammonia
  145. Improvement of Grain-Boundary Conduction in Gadolinia-Doped Ceria by the Addition of CaO
  146. Effect of external electric field on the grain growth of barium titanate in N2 atmosphere
  147. A Chemical Route to Large‐Scale Preparation of Spherical and Monodisperse Ni Powders
  148. Enhanced densification of pure SnO2 by spark plasma sintering
  149. High H2 sensing behavior of TiO2 films formed by thermal oxidation
  150. Uniform Coating of Nanometer‐Scale BaTiO3 Layer on Spherical Ni Particles via Hydrothermal Conversion of Ti‐Hydroxide
  151. Effect of external electric field on the microstructural evolution of La2O3-doped BaTiO3ceramics
  152. Low-Temperature Silicon Wafer-Scale Thermocompression Bonding Using Electroplated Gold Layers in Hermetic Packaging
  153. Development of Nanocrystalline Wear‐Resistant Y‐TZP Ceramics
  154. Effect of External Electric Field on the Grain‐Growth Behavior of Barium Titanate
  155. Coating of TiO2 nanolayer on spherical Ni particles using a novel sol-gel route
  156. THE IMPROVEMENT OF GRAIN-BOUNDARY CONDUCTION IN STABILIZED ZIRCONIA BY DEWETTING THE INTERGRANLAR PHASE
  157. Penetration and characteristics of an intergranular-liquid phase during sintering of CaSi2O5-dropped 8 mol%-yttria-stabilized zirconia estimation by impedance spectroscopy
  158. Spark Plasma Sintering (SPS) of NASICON Ceramics
  159. Development of WC–ZrO2 Nanocomposites by Spark Plasma Sintering
  160. Solid-state amperometric CO2 sensor using a sodium ion conductor
  161. Spatial distribution of resistive intergranular phase in stabilized zirconia estimated by millicontact impedance spectroscopy
  162. NASICON-based amperometric CO2 sensor using Na2CO3–BaCO3 auxiliary phase
  163. Effect of Alumina Addition on the Distribution of Intergranular‐Liquid Phase during Sintering of 15‐mol%‐Calcia‐Stabilized Zirconia
  164. Preparation of nanostructured TiO2 ceramics by spark plasma sintering
  165. Solid-state amperometric CO2 sensor using a lithium-ion conductor
  166. Study of alinite cement hydration by impedance spectroscopy
  167. Liquid-phase redistribution during sintering of 8 mol% yttria-stabilized zirconia
  168. Improvement of Grain-Boundary Conduction in 15 mol % Calcia-Stabilized Zirconia by Postsintering Heat-Treatment
  169. Inhomogeneity of Grain‐Boundary Resistivity in Calcia‐Stabilized Zirconia
  170. Precursor Scavenging of Resistive Grain-Boundary Phase in 8 mol % Ytterbia-Stabilized Zirconia
  171. Scavenging of Siliceous Grain‐Boundary Phase of 8‐mol%‐Ytterbia‐Stabilized Zirconia without Additive
  172. Positive Temperature Coefficient of Resistance Effect in Heavily Niobium‐Doped Barium Titanate by the Growth of the Double‐Twinned Seeds
  173. Precursor scavenging of the resistive grain-boundary phase in 8 mol% yttria-stabilized zirconia: Effect of trace concentrations of SiO2
  174. ChemInform Abstract: Fabrication of Translucent Magnesium Aluminum Spinel Ceramics.
  175. Synthesis of Mg–Al spinel powder via precipitation using ammonium bicarbonate as the precipitant
  176. A wet-chemical process yielding reactive magnesium aluminate spinel (MgAl2O4) powder
  177. The influence of alumina addition and its distribution upon grain-boundary conduction in 15 mol.% calcia-stabilized zirconia
  178. Impedance spectroscopic estimation of inter-granular phase distribution in 15 mol% calcia-stabilized zirconia/alumina composites
  179. Co-precipitation synthesis and sintering of yttrium aluminum garnet (YAG) powders: the effect of precipitant
  180. Fabrication of Translucent Magnesium Aluminum Spinel Ceramics
  181. Characterization of yttrium aluminate garnet precursors synthesized via precipitation using ammonium bicarbonate as the precipitant
  182. Reactive yttrium aluminate garnet powder via coprecipitation using ammonium hydrogen carbonate as the precipitant
  183. Well-sinterable Y3Al5O12 Powder from Carbonate Precursor
  184. Imaging Secondary‐Ion Mass Spectroscopy Observation of the Scavenging of Siliceous Film from 8‐mol%‐Yttria‐Stabilized Zirconia by the Addition of Alumina
  185. Low‐Temperature Fabrication of Transparent Yttrium Aluminum Garnet (YAG) Ceramics without Additives
  186. Improvement of Grain-Boundary Conductivity of 8 mol % Yttria-Stabilized Zirconia by Precursor Scavenging of Siliceous Phase
  187. Crystal Phase and Sinterability of Wet-Chemically Derived YAG Powders.
  188. A new catalyst monitoring sensor for gasoline engine using YSZ–Al2O3 as solid electrolyte and gas diffusion barrier
  189. The influence of sintering additives on the lifetime of the heater for sensor application with Al2O3 substrate
  190. Effects of H2O2 on the morphology of ZrO2 powder prepared by ultrasonic spray pyrolysis
  191. Limiting current and wide range air/fuel ratio sensors using the same YSZA12O3 layers as electrolyte and diffusion barrier
  192. Oxygen sensing characteristics of limiting current-type sensors with microstructural and structural variations in diffusion barrier
  193. Preparation of spherical Zr0.8Sn0.2TiO4 powder by ultrasonic spray pyrolysis
  194. Preparation of spherical Pb(Zr, Ti)O3 powders by ultrasonic spray pyrolysis
  195. Preparation of spherical TiO2/SnO2 powders by ultrasonic spray pyrolysis and its spinodal decomposition
  196. Preparation of Spherical SnO2 Powders by Ultrasonic Spray Pyrolysis
  197. Temperature Dependence of Electrical Condutivity in Polycrystalline Tin Oxide