All Stories

  1. Low-temperature co-sintering technique for the fabrication of multi-layer functional ceramics for solid oxide fuel cells
  2. Design and processing parameters of La2NiO4+δ-based cathode for anode-supported planar solid oxide fuel cells (SOFCs)
  3. Effect of Ba-deficiency on the phase and structural stability of (BaSr)(CeZr)O3-based proton conducting oxides
  4. Effects of crystallinity and impurities on the electrical conductivity of Li–La–Zr–O thin films
  5. Specific considerations for obtaining appropriate La1−xSrxGa1−yMgyO3−δ thin films using pulsed-laser deposition and its influence on the performance of solid-oxide fuel cells
  6. Influence of current collector and cathode area discrepancy on performance evaluation of solid oxide fuel cell with thin-film-processed cathode
  7. Effect of internal and external constraints on sintering behavior of thin film electrolytes for solid oxide fuel cells (SOFCs)
  8. BaCeO 3 -BaZrO 3 고용체(BCZY) 기반 프로톤 세라믹 연료전지(PCFC)용 고성능 전해질 개발
  9. Fabrication of thin-film gadolinia-doped ceria (GDC) interdiffusion barrier layers for intermediate-temperature solid oxide fuel cells (IT-SOFCs) by chemical solution deposition (CSD)
  10. High performance Bi-layered electrolytes via atomic layer deposition for solid oxide fuel cells
  11. Thermo-mechanical stability of multi-scale-architectured thin-film-based solid oxide fuel cells assessed by thermal cycling tests
  12. High performance air electrode for solid oxide regenerative fuel cells fabricated by infiltration of nano-catalysts
  13. Gas transport in hydrogen electrode of solid oxide regenerative fuel cells for power generation and hydrogen production
  14. Facile fabrication of YSZ/GDC multi-layers by using a split target in pulsed laser deposition and their structural and electrical properties
  15. Micro ceramic fuel cells with multilayered yttrium-doped barium cerate and zirconate thin film electrolytes
  16. Influence of background oxygen pressure on film properties of pulsed laser deposited Y:BaZrO3
  17. The potential and challenges of thin-film electrolyte and nanostructured electrode for yttria-stabilized zirconia-base anode-supported solid oxide fuel cells
  18. Three-dimensional microstructure of high-performance pulsed-laser deposited Ni–YSZ SOFC anodes
  19. Fabrication and characterization of Ba(Zr0.84Y0.15Cu0.01)O3 electrolyte-based protonic ceramic fuel cells
  20. Microstructure refinement of pulsed laser deposited La0.6Sr0.4CoO3−δ thin-film cathodes for solid oxide fuel cell
  21. Influence of wet atmosphere on electrical and transport properties of lanthanum strontium cobalt ferrite cathode materials for protonic ceramic fuel cells
  22. Fabrication and characterization of all-ceramic solid oxide fuel cells based on composite oxide anode
  23. Physical and Electrochemical Characteristics of Pulsed Laser Deposited La0.6Sr0.4CoO3- -Ce0.9Gd0.1O2-  Nanocomposites as a Function of the Mixing Ratio
  24. Determination of proton transference number of Ba(Zr0.84Y0.15Cu0.01)O3−δ via electrochemical concentration cell test
  25. Ceria-based electrolyte reinforced by sol–gel technique for intermediate-temperature solid oxide fuel cells
  26. Lattice-strain effect on oxygen vacancy formation in gadolinium-doped ceria
  27. The Effect of Post-Annealing on the Properties of a Pulsed-Laser-Deposited La0.6Sr0.4CoO3- -Ce0.9Gd0.1O2-  Nano-Composite Cathode
  28. Optimization of current collection to reduce the lateral conduction loss of thin-film-processed cathodes
  29. Structural optimization of (La, Sr)CoO3-based multilayered composite cathode for solid-oxide fuel cells
  30. Enhanced oxygen diffusion in epitaxial lanthanum–strontium–cobaltite thin film cathodes for micro solid oxidefuel cells
  31. Thin Film Yttria-Stabilized Zirconia (YSZ) Electrolyte Fabricated by a Novel Chemical Solution Deposition (CSD) Process for Solid Oxide Fuel Cells (SOFCs)
  32. Study on the Electrode Reaction Mechanism of Pulsed-Laser Deposited Thin-Film La1-xSrxCoO3-  (x = 0.2. 0.4) Cathodes
  33. Thin film yttria-stabilized zirconia electrolyte for intermediate-temperature solid oxide fuel cells (IT-SOFCs) by chemical solution deposition
  34. The thermomechanical stability of micro-solid oxide fuel cells fabricated on anodized aluminum oxide membranes
  35. Extremely Thin Bilayer Electrolyte for Solid Oxide Fuel Cells (SOFCs) Fabricated by Chemical Solution Deposition (CSD)
  36. The effect of an ultra-thin zirconia blocking layer on the performance of a 1-μm-thick gadolinia-doped ceria electrolyte solid-oxide fuel cell
  37. Effect of Elastic Network of Ceramic Fillers on Thermal Cycle Stability of a Solid Oxide Fuel Cell Stack
  38. PLD 공정으로 제조된 LSM-YSZ 나노복합체층이 포함된 경사구조 박막 공기극을 적용한 SOFC의 성능 분석
  39. Three dimensional representations of partial ionic and electronic conductivity based on defect structure analysis of BaZr0.85Y0.15O3−δ
  40. Microstructural factors of electrodes affecting the performance of anode-supported thin film yttria-stabilized zirconia electrolyte (∼1μm) solid oxide fuel cells
  41. A Comparative Study of Catalytic Partial Oxidation of Methane Over Ceo2 Supported Metallic Catalysts
  42. High‐Performance Micro‐Solid Oxide Fuel Cells Fabricated on Nanoporous Anodic Aluminum Oxide Templates
  43. Surface modification of anode substrate via nano-powder slurry spin coating for the thin film electrolyte of solid oxide fuel cell
  44. Low temperature fabrication of nano-structured porous LSM–YSZ composite cathode film by aerosol deposition
  45. ‘Illusional’ nano-size effect due to artifacts of in-plane conductivity measurements of ultra-thin films
  46. Pulsed Laser Deposition of La0.6Sr0.4CoO3−δ-Ce0.9Gd0.1O2−δ Nano-Composite and Its Application to Gradient-Structured Thin-film Cathode of SOFC
  47. Transmission Electron Microscopy Study on Microstructure and Interfacial Property of Thin Film Electrolyte SOFC
  48. Limitation of Thickness Increment of Lanthanum Strontium Cobaltite Cathode Fabricated by Pulsed Laser Deposition
  49. Viable AC Two-Probe Impedance Spectroscopy Based on Spatially-Limited Contact Probe for SOFC Cathode
  50. Potential and Limitation of Application of Pulsed Laser Deposited Nano-Structure LSC Thin Film Cathode to YSZ Electrolyte SOFC
  51. Direct Applicability of La0.6Sr0.4CoO3 – δ Thin Film Cathode to Yttria Stabilised Zirconia Electrolytes at T ≤ 650 °C
  52. Suppression of Ni agglomeration in PLD fabricated Ni-YSZ composite for surface modification of SOFC anode
  53. Effects of B-site substitution on the surface adsorption properties and catalytic activities of La0.8Sr0.2(Mn1−xCox)O3
  54. Physical and Microstructural Properties of NiO‐ and Ni‐YSZ Composite Thin Films Fabricated by Pulsed‐Laser Deposition at T≤700°C
  55. Low Temperature Performance Improvement of SOFC with Thin Film Electrolyte and Electrodes Fabricated by Pulsed Laser Deposition
  56. Thin Film Electrolyte Micro-SOFC: Fabrication and Performance Improvement through Thin Film Electrolyte and Nano-Structure Electrodes
  57. 저온작동 (600∼650 ° C) SOFC용 복합밀봉재 제조 및 평가
  58. Substrate effect on the electrical properties of sputtered YSZ thin films for co-planar SOFC applications
  59. 메탄-산소 혼합가스 조건에서의 페롭스카이트계 산화물의 촉매특성 평가
  60. Effect of the LDC Buffer Layer in LSGM-based Anode-supported SOFCs
  61. 박막공정의 융합화를 통한 초소형 고체산화물 연료전지의 제작: I. Spray Pyrolysis법으로 증착된 Ni 기반 음극과 스퍼터링으로 증착된 YSZ 전해질의 다층구조
  62. An investigation of the interfacial stability between the anode and electrolyte layer of LSGM-based SOFCs
  63. Performance and Reliability Improvement of Planar SOFC Stack with Advanced Design of Unit Cell and Sealing
  64. Fabrication and Characterization of Miniaturized SOFC by Colloidal Process
  65. SOFCs with Sc-Doped Zirconia Electrolyte and Co-Containing Perovskite Cathodes
  66. Pulsed laser deposition of single phase LiNbO3 thin film waveguides
  67. Particle size effects on temperature-dependent performance of LiCoO2 in lithium batteries
  68. Sub-micron ferroelectric domain engineering in liquid phase epitaxy LiNbO3 by direct-write e-beam techniques
  69. Direct-write e-beam sub-micron domain engineering in liquid phase epitaxy (LPE) LiNbO3 thin films and single crystal LiNbO3
  70. Parametric Studies on Suppression of Secondary Phases in LiNbO3 Thin Films Deposited by Pulsed Laser Deposition
  71. Domain engineering in LiNbO_3 thin films grown by liquid phase epitaxy
  72. Domain engineering in LiNbO3 thin films grown by liquid phase epitaxy
  73. Direct-Write E-beam Submicron Domain Engineering in LiNbO3 Thin Films Grown by Liquid Phase Epitaxy
  74. Enhanced Densification of In2O3 Ceramics by Presintering with Low Pressure (5 MPa)