All Stories

  1. Cartridge filter selection and replacement: Optimization of produced water quantity, quality, and cost
  2. Optimisation of a forward osmosis and membrane distillation hybrid system for the treatment of source-separated urine
  3. Role of feed water biodegradable substrate concentration on biofouling: Biofilm characteristics, membrane performance and cleanability
  4. ATP measurement in seawater reverse osmosis systems: Eliminating seawater matrix effects using a filtration-based method
  5. Enhanced biofilm solubilization by urea in reverse osmosis membrane systems
  6. A uniform bacterial growth potential assay for different water types
  7. Impact of Distribution and Network Flushing on the Drinking Water Microbiome
  8. Fouling resilient perforated feed spacers for membrane filtration
  9. Polyelectrolyte-Based Sacrificial Protective Layer for Fouling Control in Reverse Osmosis Desalination
  10. Simultaneous phosphorous and nitrogen recovery from source-separated urine: A novel application for fertiliser drawn forward osmosis
  11. Review on strategies for biofouling mitigation in spiral wound membrane systems
  12. Application of monochloramine for wastewater reuse: Effect on biostability during transport and biofouling in RO membranes
  13. Earth’s field MRI for the non-invasive detection of fouling in spiral-wound membrane modules in pressure vessels during operation
  14. The membrane fouling simulator: development, application, and early-warning of biofouling in RO treatment
  15. Characterization of the bacterial community in shower water before and after chlorination
  16. Biofouling in capillary and spiral wound membranes facilitated by marine algal bloom
  17. Aquaporin based biomimetic membrane in forward osmosis: Chemical cleaning resistance and practical operation
  18. Porosity of spacer-filled channels in spiral-wound membrane systems: Quantification methods and impact on hydraulic characterization
  19. Flow cytometric bacterial cell counts challenge conventional heterotrophic plate counts for routine microbiological drinking water monitoring
  20. Predicting the impact of feed spacer modification on biofouling by hydraulic characterization and biofouling studies in membrane fouling simulators
  21. Spatially-resolved in-situ quantification of biofouling using optical coherence tomography (OCT) and 3D image analysis in a spacer filled channel
  22. Applicability of short-term accelerated biofouling studies to predict long-term biofouling accumulation in reverse osmosis membrane systems
  23. Application of DBNPA dosage for biofouling control in spiral wound membrane systems
  24. Biofouling patterns in spacer filled channels: High resolution imaging for characterization of heterogeneous biofilms
  25. Characterization of feed channel spacer performance using geometries obtained by X-ray computed tomography
  26. Coating of reverse osmosis membranes with amphiphilic copolymers for biofouling control
  27. Construction and validation of a long-channel membrane test cell for representative monitoring of performance and characterization of fouling over the length of spiral-wound membrane modules
  28. Eukaryotic community diversity and spatial variation during drinking water production (by seawater desalination) and distribution in a full-scale network
  29. Biofouling in forward osmosis systems: An experimental and numerical study
  30. Spatial heterogeneity of biofouling under different cross-flow velocities in reverse osmosis membrane systems
  31. Long-Term Bacterial Dynamics in a Full-Scale Drinking Water Distribution System
  32. Effect of water temperature on biofouling development in reverse osmosis membrane systems
  33. Hybrid SBR–FO system for wastewater treatment and reuse: Operation, fouling and cleaning
  34. Mini-review: novel non-destructive in situ biofilm characterization techniques in membrane systems
  35. Bacterial community structure and variation in a full-scale seawater desalination plant for drinking water production
  36. Temporal changes in extracellular polymeric substances on hydrophobic and hydrophilic membrane surfaces in a submerged membrane bioreactor
  37. Development and characterization of 3D-printed feed spacers for spiral wound membrane systems
  38. Biological Stability of Drinking Water: Controlling Factors, Methods, and Challenges
  39. A systematic approach for the assessment of bacterial growth-controlling factors linked to biological stability of drinking water in distribution systems
  40. Life cycle cost of a hybrid forward osmosis – low pressure reverse osmosis system for seawater desalination and wastewater recovery
  41. Experimental and numerical characterization of the water flow in spacer-filled channels of spiral-wound membranes
  42. Early non-destructive biofouling detection and spatial distribution: Application of oxygen sensing optodes
  43. Early non-destructive biofouling detection in spiral wound RO membranes using a mobile earth׳s field NMR
  44. Development of a setup to enable stable and accurate flow conditions for membrane biofouling studies
  45. Compaction and relaxation of biofilms
  46. Phosphate and arsenate removal efficiency by thermostable ferritin enzyme from Pyrococcus furiosus using radioisotopes
  47. Calcium carbonate scaling in seawater desalination by ammonia–carbon dioxide forward osmosis: Mechanism and implications
  48. Dynamics of bacterial communities before and after distribution in a full-scale drinking water network
  49. Magnetic resonance signal moment determination using the Earth’s magnetic field
  50. Impact of organic nutrient load on biomass accumulation, feed channel pressure drop increase and permeate flux decline in membrane systems
  51. Forward osmosis niches in seawater desalination and wastewater reuse
  52. In-situ biofilm characterization in membrane systems using Optical Coherence Tomography: Formation, structure, detachment and impact of flux change
  53. Spacer geometry and particle deposition in spiral wound membrane feed channels
  54. Long-term performance and fouling analysis of full-scale direct nanofiltration (NF) installations treating anoxic groundwater
  55. Combining flow cytometry and 16S rRNA gene pyrosequencing: A promising approach for drinking water monitoring and characterization
  56. Higher boron rejection with a new TFC forward osmosis membrane
  57. Effect of different commercial feed spacers on biofouling of reverse osmosis membrane systems: A numerical study
  58. Impact of spacer thickness on biofouling in forward osmosis
  59. Impact of biofilm accumulation on transmembrane and feed channel pressure drop: Effects of crossflow velocity, feed spacer and biodegradable nutrient
  60. Development and testing of a transparent membrane biofouling monitor
  61. Monitoring microbiological changes in drinking water systems using a fast and reproducible flow cytometric method
  62. Water harvesting from municipal wastewater via osmotic gradient: An evaluation of process performance
  63. Do biological-based strategies hold promise to biofouling control in MBRs?
  64. A microbiology-based multi-parametric approach towards assessing biological stability in drinking water distribution networks
  65. Hydraulic resistance of biofilms
  66. Short-term adhesion and long-term biofouling testing of polydopamine and poly(ethylene glycol) surface modifications of membranes and feed spacers for biofouling control
  67. New approaches to characterizing and understanding biofouling of spiral wound membrane systems
  68. Impact of feed spacer and membrane modification by hydrophilic, bactericidal and biocidal coating on biofouling control
  69. The potential of standard and modified feed spacers for biofouling control
  70. Effect of flow velocity, substrate concentration and hydraulic cleaning on biofouling of reverse osmosis feed channels
  71. Quantitative measurement and visualization of biofilm O2 consumption rates in membrane filtration systems
  72. Quantitative Measurement and Visualization of Biofilm O2 Consumption Rates Inmembrane Filtration Systems
  73. Hydraulic Biofilm Resistance
  74. A simple optode based method for imaging O2 distribution and dynamics in tap water biofilms
  75. Biofouling in membrane devices treating water with different salinities: a modeling study
  76. A novel scenario for biofouling control of spiral wound membrane systems
  77. Early warning of biofouling in spiral wound nanofiltration and reverse osmosis membranes
  78. Integrated approach for biofouling control
  79. Magnetic resonance imaging and 3D simulation studies of biofilm accumulation and cleaning on reverse osmosis membranes
  80. Modeling the effect of biofilm formation on reverse osmosis performance: Flux, feed channel pressure drop and solute passage
  81. Chemical cleaning of biofouling in reverse osmosis membranes evaluated using magnetic resonance imaging
  82. Phosphate limitation to control biofouling
  83. Impact of flow regime on pressure drop increase and biomass accumulation and morphology in membrane systems
  84. Biofouling in spiral wound membrane systems: Three-dimensional CFD model based evaluation of experimental data
  85. Three-dimensional modeling of biofouling and fluid dynamics in feed spacer channels of membrane devices
  86. Sensitive pressure drop measurements of individual lead membrane elements for accurate early biofouling detection
  87. Pressure drop increase by biofilm accumulation in spiral wound RO and NF membrane systems: role of substrate concentration, flow velocity, substrate load and flow direction
  88. Biofouling of spiral-wound nanofiltration and reverse osmosis membranes: A feed spacer problem
  89. A critical flux to avoid biofouling of spiral wound nanofiltration and reverse osmosis membranes: Fact or fiction?
  90. Quantitative biofouling diagnosis in full scale nanofiltration and reverse osmosis installations
  91. Monitoring and control of biofouling in nanofiltration and reverse osmosis membranes
  92. Nuclear magnetic resonance microscopy studies of membrane biofouling
  93. The membrane fouling simulator: a suitable tool for prediction and characterisation of membrane fouling
  94. Air/water cleaning for biofouling control in spiral wound membrane elements
  95. The Membrane Fouling Simulator as a new tool for biofouling control of spiral-wound membranes
  96. Periodic air/water cleaning for control of biofouling in spiral wound membrane elements
  97. The Membrane Fouling Simulator: A practical tool for fouling prediction and control
  98. Tools for fouling diagnosis of NF and RO membranes and assessment of the fouling potential of feed water
  99. Diagnosis of fouling problems of NF and RO membrane installations by a quick scan
  100. Diagnosis, prediction and prevention of biofouling of NF and RO membranes
  101. Biofouling potential of chemicals used for scale control in RO and NF membranes
  102. RO treatment: selection of a pretreatment scheme based on fouling characteristics and operating conditions based on environmental impact
  103. Biofouling of membranes for drinking water production
  104. Use of chemostat data for modelling extracellular-inulinase production by Kluyveromyces marxianus in a high-cell-density fed-batch process
  105. Kinetic aspects of biofilm formation on surfaces exposed to drinking water
  106. Production of extracellular inulinase in high-cell-density fed-batch cultures of Kluyveromyces marxianus