All Stories

  1. Academic Unit Strategies and Outcomes for Addressing Student Obstacles in PhD Programs
  2. Enhancing microalgae cell inactivation through hydrodynamic cavitation: Insights from flow cytometry analysis
  3. Identifying surface formation and adhesion mechanisms of FOG deposits on sewer lines
  4. Experimental Observation and Simulation of UV-C-Based Personal-Scale Reactors for Airborne Pathogen Disinfection
  5. Perturbations to common gardens of anaerobic co-digesters reveal relationships between functional resilience and microbial community composition
  6. Measurement and Temperature Prediction from Ash Disposed in Landfills Using a Quasi-Adiabatic Flow Reactor
  7. Microbial community assembly in engineered bioreactors
  8. Fat, Oil, and Grease Sewer Waste Management System: A Modeling Platform for Simulating the Formation of FOG Deposits in Sewer Networks
  9. Microplate-Based Cell Viability Assay as a Cost-Effective Alternative to Flow Cytometry for Microalgae Analysis
  10. Quasi-Mechanistic 3D Finite Element Model Predicts Temperatures in a U.S. Landfill
  11. Biotransformation of micropollutants in moving bed biofilm reactors under heterotrophic and autotrophic conditions
  12. Growth of Dunaliella viridis in multiple cycles of reclaimed media after repeated high pH-induced flocculation and harvesting
  13. Effects of UV-C Disinfection on N95 and KN95 Filtering Facepiece Respirator Reuse
  14. AEESP Endured Despite a Challenging Year
  15. Computational Fluid Dynamics Simulation of Suspended Solids Transport in a Secondary Facultative Lagoon Used for Wastewater Treatment
  16. Chlorophyll a and non-pigmented biomass are sufficient predictors for estimating light attenuation during cultivation of Dunaliella viridis
  17. Measurement of heat release during hydration and carbonation of ash disposed in landfills using an isothermal calorimeter
  18. The effect of activated sludge floc morphology on the measurement of biomass half-saturation coefficient: A 2D CFD biofilm model-based evaluation and experimental verification
  19. Biodegradation of organophosphorus pesticides in moving bed biofilm reactors: Analysis of microbial community and biodegradation pathways
  20. The Healing and Joyful Power of the Service to Others
  21. AEESP: A Collective Force to Achieve Educational and Research Heights in Environmental Engineering and Science
  22. Finite-Element Modeling of Landfills to Estimate Heat Generation, Transport, and Accumulation
  23. Reducing fat, oil, and grease (FOG) deposits formation and adhesion on sewer collection system structures through the use of fly ash replaced cement-based materials
  24. Assessment of alternative herbicides for residential sewer root treatment and their effects on downstream treatment plant nitrification
  25. Modeling cell aggregate morphology during aerobic granulation in activated sludge processes reveals the combined effect of substrate and shear
  26. Increased loading stress leads to convergence of microbial communities and high methane yields in adapted anaerobic co-digesters
  27. Relating nitrogen concentration and light intensity to the growth and lipid accumulation of Dunaliella viridis in a photobioreactor
  28. Dynamic Modeling of Microalgae Growth and Lipid Production under Transient Light and Nitrogen Conditions
  29. Flux modeling for monolignol biosynthesis
  30. Genetic Algorithm–Genetic Programming Approach to Identify Hierarchical Models for Ultraviolet Disinfection Reactors
  31. Measuring the Shape and Size of Activated Sludge Particles Immobilized in Agar with an Open Source Software Pipeline
  32. Dynamic modelling of the iron deficiency modulated transcriptome response in Arabidopsis thaliana roots
  33. Controlling aerobic biological floc size using Couette-Taylor Bioreactors
  34. Development of Photochemical Microsensors for Evaluating Photosynthetic Light Dose Distributions in Microalgal Photobioreactors
  35. Another Grand Challenge: Diversity in Environmental Engineering
  36. Improving wood properties for wood utilization through multi-omics integration in lignin biosynthesis
  37. Assessing the impact of the 4CL enzyme complex on the robustness of monolignol biosynthesis using metabolic pathway analysis
  38. <i>Preliminary tests of sensors to detect sewer network blockages</i>
  39. Heat Generation and Accumulation in Municipal Solid Waste Landfills
  40. A critical review of fat, oil, and grease (FOG) in sewer collection systems: Challenges and control
  41. Construction and Setup of a Bench-scale Algal Photosynthetic Bioreactor with Temperature, Light, and pH Monitoring for Kinetic Growth Tests
  42. Construction and Setup of a Bench-scale Algal Photosynthetic Bioreactor with Temperature, Light, and pH Monitoring for Kinetic Growth Tests
  43. Attenuated Total Reflectance Fourier transform infrared spectroscopy for determination of Long Chain Free Fatty Acid concentration in oily wastewater using the double wavenumber extrapolation technique
  44. A Model to Describe Heat Generation and Accumulation at Municipal Solid Waste Landfills
  45. Modeling fats, oil and grease deposit formation and accumulation in sewer collection systems
  46. A Proteomic‐Based Quantitative Analysis of the Relationship Between Monolignol Biosynthetic Protein Abundance and Lignin Content Using TransgenicPopulus trichocarpa
  47. Trends in Population and Demographics of U.S. Environmental Engineering Students and Faculty from 2005 to 2013
  48. Structural characteristics and development of the cake layer in a dynamic membrane bioreactor
  49. CFD for wastewater treatment: an overview
  50. Quantifying fat, oil, and grease deposit formation kinetics
  51. Good modelling practice in applying computational fluid dynamics for WWTP modelling
  52. Heuristic optimization of a continuous flow point-of-use UV-LED disinfection reactor using computational fluid dynamics
  53. Computational approaches to identify regulators of plant stress response using high-throughput gene expression data
  54. Clustering and Differential Alignment Algorithm: Identification of Early Stage Regulators in the Arabidopsis thaliana Iron Deficiency Response
  55. Population balance models: a useful complementary modelling framework for future WWTP modelling
  56. Computational fluid dynamics modeling alternatives for UV-initiated advanced oxidation processes
  57. Enhanced Nitrogen Removal by Rice Husk Amended Dynamic Membrane Bioreactors
  58. A protocol for the use of computational fluid dynamics as a supportive tool for wastewater treatment plant modelling
  59. FOGISEW: Modeling FOG Deposit Formation in Sewer Collection System
  60. Effect of source and environmental factors on properties and kinetics of FOG deposits in sewer collection systems
  61. Modeling a continuous flow ultraviolet Light Emitting Diode reactor using computational fluid dynamics
  62. Systems Biology of Lignin Biosynthesis in Populus trichocarpa: Heteromeric 4-Coumaric Acid:Coenzyme A Ligase Protein Complex Formation, Regulation, and Numerical Modeling
  63. Complete Proteomic-Based Enzyme Reaction and Inhibition Kinetics Reveal How Monolignol Biosynthetic Enzyme Families Affect Metabolic Flux and Lignin in Populus trichocarpa
  64. Factors that influence properties of FOG deposits and their formation in sewer collection systems
  65. Understanding the spatial formation and accumulation of fats, oils and grease deposits in the sewer collection system
  66. Mechanisms of Fat, Oil and Grease (FOG) deposit formation in sewer lines
  67. Monolignol Pathway 4-Coumaric Acid:Coenzyme A Ligases in Populus. trichocarpa: Novel Specificity, Metabolic Regulation, and Simulation of Coenzyme A Ligation Fluxes  
  68. Anaerobic co-digestion of fat, oil, and grease (FOG): A review of gas production and process limitations
  69. Field Characterization of External Grease Abatement Devices
  70. Optimization of waste stabilization pond design for developing nations using computational fluid dynamics
  71. Assessment of Internal and External Grease Interceptor Performance for Removal of Food‐Based Fats, Oil, and Grease from Food Service Establishments
  72. Evidence for Fat, Oil, and Grease (FOG) Deposit Formation Mechanisms in Sewer Lines
  73. Microbial UV fluence-response assessment using a novel UV-LED collimated beam system
  74. Combining CFD, FLOC Dynamics, and Biological Reaction Kinetics to Model Carbon and Nitrogen Removal in an Activated Sludge System
  75. MODELING TORTUOSITY IN THIN FIBROUS POROUS MEDIA USING COMPUTATIONAL FLUID DYNAMICS
  76. Performance of Grease Abatement Devices for Removal of Fat, Oil, and Grease
  77. Modeling Hydroxyl Radical Distribution and Trialkyl Phosphates Oxidation in UV−H2O2 Photoreactors Using Computational Fluid Dynamics
  78. Modeling the UV/hydrogen peroxide advanced oxidation process using computational fluid dynamics
  79. Field Assessment of Grease Abatement Devices
  80. Assessing the Impact of Upstream Hydraulics on the Dose Distribution of Ultraviolet Reactors Using Fluorescence Microspheres and Computational Fluid Dynamics
  81. Fats, Roots, Oils, and Grease (FROG) in Centralized and Decentralized Systems
  82. Celebrating a milestone in Population Balance Modeling
  83. Properties Influencing Fat, Oil, and Grease Deposit Formation
  84. Application of non-biological surrogates for analysis of sequential disinfection continuous flow systems
  85. Monitoring Microbial Shifts during Activated Sludge Floc and Aerobic Granule Development
  86. Observation and Analysis of Popular Root Control Methods in Pilot Scale Sanitary Sewer
  87. Numerical simulation of UV disinfection reactors: Evaluation of alternative turbulence models
  88. Simulation of Flocculation in Stirred Vessels Lagrangian Versus Eulerian
  89. Comparative Inactivation ofBacillus SubtilisSpores and MS-2 Coliphage in a UV Reactor: Implications for Validation
  90. From lag synchronization to pattern formation in one-dimensional open flow models
  91. Numerical simulation of chloramines formation in turbulent flow using a multi-fluid micromixing model
  92. Effect of particles on ultraviolet light penetration in natural and engineered systems
  93. Impact of Turbulent Mixing on the Performance of a CFD Chloramine Model
  94. Modeling spatial distribution of floc size in turbulent processes using the quadrature method of moment and computational fluid dynamics
  95. Experimental Measurements of Fluence Distribution in a UV Reactor Using Fluorescent Microspheres
  96. Alternative Approaches to Modeling Fluence Distribution and Microbial Inactivation in Ultraviolet Reactors: Lagrangian versus Eulerian
  97. Assessment of Reduction Equivalent Fluence Bias Using Computational Fluid Dynamics
  98. Impact of lamp shadowing and reflection on the fluence rate distribution in a multiple low-pressure UV lamp array
  99. UV disinfection of chlorinated water: impact on chlorine concentration and UV dose delivery
  100. Determination of ultraviolet sensor location for sensor set-point monitoring using computational fluid dynamics
  101. Impact of Influent Pipe Configuration on UV Reactor Performance: Is the Elbow Truly the Worst Case Hydraulic Condition?
  102. Evaluation of alternative fluence rate distribution models
  103. A non-biological surrogate for sequential disinfection processes
  104. Modeling Low-Energy Mixers for Chemical Dispersion in Water Treatment
  105. Characterizing flocculation under heterogeneous turbulence
  106. Modeling Nitrogen Transport in Duckweed Pond for Secondary Treatment of Swine Wastewater
  107. Modeling of Disinfection Contactor Hydraulics under Uncertainty
  108. A two-scale PBM for modeling turbulent flocculation in water treatment processes
  109. Optimization of activated sludge designs using genetic algorithms
  110. The integrated disinfection design framework approach to reactor hydraulics characterization
  111. System-Wide Optimization of Wastewater Treatment Plants Using Genetic Algorithms
  112. Lessons for Applying Computational Fluid Dynamics Modeling to Disinfection Clearwells
  113. Determining disinfection needs
  114. Turbulence in flocculators: Comparison of measurements and CFD simulations
  115. The Influence of Tank Size and Impeller Geometry on Turbulent Flocculation: I. Experimental
  116. The Influence of Tank Size and Impeller Geometry on Turbulent Flocculation: II. Model
  117. Turbulence in flocculators: Effects of tank size and impeller type
  118. WIP: Piloting a Comprehensive Needs Assessment to Enhance Engineering Faculty Development
  119. Reimagining Faculty Development with an Entrepreneurial Approach Using the Harvard Business Review Framework and a Corporate Brand Identity Matrix
  120. WIP: A Call to Action: Developing A Leadership Program that Supports Academic Caregivers Using the Kotter Change Model