All Stories

  1. Revealing the crystal transition of isotactic polybutene-1 via in situ Raman spectroscopy
  2. Biochar-encapsulated Ca-alginate hydrogels for copper harvesting from water: scalable composite design and mechanistic insights
  3. A photoinitiator-free UV-curable hydrogel with tunable properties using dextrans modified by adamantane, benzophenone, and β-cyclodextrin
  4. Mechanical properties of biopolymer gels: a review
  5. Multivalent ion-crosslinked alginate–montmorillonite nanocomposite hydrogels for hydrophilic drug release
  6. Injection rate of cylinder lubrication oil in large two-stroke marine diesel engines using a common rail lubrication system
  7. A computational study on wear behavior in piston ring-cylinder liner assemblies
  8. Enhancing biodegradation of polyolefins and real mixed plastic waste by combination of pretreatment and mixed microbial consortia
  9. Numerical analysis of the scavenging process in a large Two-Stroke engine using varied turbulence models
  10. A Photoinitiator-Free Uv-Curable Hydrogel with Tunable Properties Using Dextrans Modified by Adamantane, Benzophenone, and Β-Cyclodextrin
  11. In situ Raman scattering investigation of crystal phase transition in isotactic polybutene-1
  12. Crystallization and melting of polyethylene strongly cross-linked in the molten state
  13. In-vitro Delivery of Hydrophilic Drugs from Alginate–Montmorillonite Nanocomposite Hydrogels Cross-linked with Multivalent Cations
  14. Rheology of plant protein–polysaccharide gel inks for 3D food printing: Modeling and structure–property relations
  15. Decoupling elasticity and electrical conductivity of carbon-black gels filled with insulating non-Brownian grains
  16. Structure-property relations in rheology of cellulose nanofibrils-based hydrogels
  17. Efficient Depolymerization of Poly(ethylene 2,5-furanoate) Using Polyester Hydrolases
  18. Implementation of a VoF solver with phase change for the simulation of internal cavitation and droplet breakup in injectors
  19. Cold crystallization of polytrimethylene terephthalate and copolymers
  20. Controlling the rheo-electric properties of graphite/carbon black suspensions by ‘flow switching’
  21. Unveiling the Potential of Chitosan Nanoparticles and Jojoba Oil for Optimizing Poly(lactic acid) Characteristics: Insights into Physico-chemical Attributes and Crystallization Mechanisms
  22. Enriching Poly(lactic acid) Properties: Impact of Chitosan Nanoparticles and Jojoba Oil on Physico-chemical Characteristics and Isothermal Crystallization Behavior
  23. The Effect of pH on the Viscoelastic Response of Alginate–Montmorillonite Nanocomposite Hydrogels
  24. Cold Crystallization of Polytrimethylene Terephthalate and Copolymers
  25. Melt memory in random ethylene-1-alkene copolymers
  26. Numerical Analysis of the Scavenging Process in a Large Two-Stroke Engine Using Varied Turbulence Models
  27. Engineering Photo-Cross-Linkable MXene-Based Hydrogels: Durable Conductive Biomaterials for Electroactive Tissues and Interfaces
  28. Pure Hydrolysis of Polyamides: A Comparative Study
  29. The Effect of Physical Aging on the Viscoelastoplastic Response of Glycol Modified Poly(ethylene terephthalate)
  30. Toward Sustainability in the Built Environment: An Integrative Approach
  31. Pure Hydrolysis of Polyamides: A Comparative Study
  32. Stable hydrogel adhesion to polydimethylsiloxane enables cyclic mechanical stimulation of 3D‐bioprinted smooth muscle constructs
  33. The Effect of Temperature on the Mechanical Properties of Alginate Gels in Water/Alcohol Solutions
  34. Mechanical Properties of Alginate Hydrogels Cross-Linked with Multivalent Cations
  35. Swelling of Homogeneous Alginate Gels with Multi-Stimuli Sensitivity
  36. Lifetime Predictions for High-Density Polyethylene under Creep: Experiments and Modeling
  37. Rheology of polydisperse nonspherical graphite particles suspended in mineral oil
  38. The Effect of Physical Aging on the Viscoelastoplastic Response of Glycol Modified Poly(Ethylene Terephthalate)
  39. Pressure-independent through-plane electrical conductivity measurements of highly filled conductive polymer composites
  40. Tailoring Hydrogel Composition and Stiffness to Control Smooth Muscle Cell Differentiation in Bioprinted Constructs
  41. Enhancement of viscoelastic property of MABS processed by melt compounding and injection molding
  42. Swelling of Thermo-Responsive Gels in Aqueous Solutions of Salts: A Predictive Model
  43. Modeling the viscoplastic response of supramolecular elastomers
  44. Equilibrium Swelling of Thermo-Responsive Gels in Mixtures of Solvents
  45. Reentrant-Convex Swelling of Thermoresponsive Gels in Mixtures of Solvents
  46. Glassy structure affected cold-crystallization behavior and structure of poly(lactic acid)
  47. Tuning the viscoelastic response of hydrogel scaffolds with covalent and dynamic bonds
  48. A Predictive Model for Equilibrium Swelling of Thermoresponsive Gels in Aqueous Solutions of Surfactants
  49. Modulation of the volume phase transition temperature for multi-stimuli-responsive copolymer hydrogels
  50. Swelling of composite microgels with soft cores and thermo-responsive shells
  51. A model for equilibrium swelling of the upper critical solution temperature type thermoresponsive hydrogels
  52. Equilibrium swelling of multi-stimuli-responsive copolymer gels
  53. Toward sustainability in the built environment: An integrative approach
  54. Thermo-Viscoelastic Response of Protein-Based Hydrogels
  55. Thermo-Mechanical Behavior of Poly(ether ether ketone): Experiments and Modeling
  56. The effects of pH and ionic strength on the volume phase transition temperature of thermo-responsive anionic copolymer gels
  57. Modulation of the volume phase transition temperature of thermo-responsive gels
  58. Mechanical and microstructural characterization of poly(N-isopropylacrylamide) hydrogels and its nanocomposites
  59. Structure–property relations in linear viscoelasticity of supramolecular hydrogels
  60. Equilibrium swelling of thermo‐responsive core‐shell microgels
  61. Tension–compression asymmetry in the mechanical response of hydrogels
  62. Corrigendum to “Crystallisation of iPB-1 based on preserved helix conformation” [Polymer 190 (2020) 122209]
  63. Mechanical response and equilibrium swelling of thermoresponsive copolymer hydrogels
  64. Modeling dielectric permittivity of polymer composites at microwave frequencies
  65. Modeling dielectric permittivity of polymer composites filled with transition metal dichalcogenide nanoparticles
  66. Self-recovery, fatigue and anti-fatigue of supramolecular elastomers
  67. Modeling electrical conductivity of polymer nanocomposites with aggregated filler
  68. Modeling the elastic response of polymer foams at finite deformations
  69. Electromagnetic properties and EMI shielding effectiveness of polymer composites reinforced with ferromagnetic particles at microwave frequencies
  70. Crystallisation of iPB-1 based on preserved helix conformation
  71. Thermal dynamics affected formation and dislocation of PDLA morphology
  72. Micromechanical modeling of barrier properties of polymer nanocomposites
  73. Thermo-mechanical behavior of elastomers with dynamic covalent bonds
  74. Equilibrium swelling of thermo-responsive copolymer microgels
  75. The effect of saccharides on equilibrium swelling of thermo-responsive gels
  76. Multiscale Characterization of a Wood-Based Biocrude as a Green Compatibilizing Agent for High-Impact Polystyrene/Halloysite Nanotube Nanocomposites
  77. Evaluation of Relationship Between Crystallization Structure and Thermal‐Mechanical Performance of PLA with MCC Addition
  78. Thermal conductivity of highly filled polymer nanocomposites
  79. The effect of porosity on elastic moduli of polymer foams
  80. Modeling Thermal Conductivity of Highly Filled Polymer Composites
  81. Conformational Energy Settled Crystallization Behaviors of Poly(l-lactic acid)
  82. Closing the loop for PET, PE and PP waste from households: Influence of material properties and product design for plastic recycling
  83. Stretch‐induced stable‐metastable crystal transformation of PVDF/graphene composites
  84. Coupling method for internal nozzle flow and the spray formation for viscous liquids
  85. Self-recovery and fatigue of double-network gels with permanent and reversible bonds
  86. Memory effects on crystallization behaviours of poly(l-lactic acid) revisited
  87. Double-network gels with dynamic bonds under multi-cycle deformation
  88. Multi-cycle deformation of supramolecular elastomers: Constitutive modeling and structure-property relations
  89. Time-dependent response of hydrogels under multiaxial deformation accompanied by swelling
  90. Mechanical response of double-network gels with dynamic bonds under multi-cycle deformation
  91. Conformation Selected Direct Formation of Form I in Isotactic Poly(butene-1)
  92. Macroporous temperature-sensitive gels with fast response: Comparison of preparation methods
  93. Nanocomposite Gels with Permanent and Transient Junctions under Cyclic Loading
  94. A Novel Bioresidue to Compatibilize Sodium Montmorillonite and Linear Low Density Polyethylene
  95. Self-recovery, Fatigue and Anti-fatigue of Supramolecular Elastomers
  96. Bending of multilayer nanomembranes
  97. Structure–property relations for temperature-responsive gels
  98. Modeling the non-isothermal viscoelastic response of glassy polymers
  99. A simplified model for equilibrium and transient swelling of thermo-responsive gels
  100. Rheological behaviour of lubrication oils used in two-stroke marine engines
  101. Mechanical response and equilibrium swelling of temperature-responsive gels
  102. A MODEL FOR CAVITATION-INDUCED PRIMARY BREAK-UP OF VISCOUS LIQUID SPRAYS
  103. Apparent stiffening of a graphene nanomembrane with initial curvature
  104. The effects of pH and ionic strength on equilibrium swelling of polyampholyte gels
  105. Multiscale Investigation of a Bioresidue as a Novel Intercalant for Sodium Montmorillonite
  106. A Concrete and Viable Example of Multimaterial Body: The Evolution Project Main Outcomes
  107. Evolution FP7 funded project: body structure design strategies using new composite and aluminium materials and enabled technologies
  108. Swelling of glucose-responsive gels functionalized with boronic acid
  109. Deformation-induced crystalline structure evolutions of isotactic poly-1-butene
  110. Swelling-induced bending of bilayer gel beams
  111. Analysis of structure transition and compatibility of PTT/PC blend without transesterification
  112. The Effects of pH and Ionic Strength of Swelling of Cationic Gels
  113. pH-sensitive gels swell when immersed into water. Constitutive equations are derived
  114. Structure-property relations for equilibrium swelling of cationic gels
  115. Direct investigations on strain-induced cold crystallization behavior and structure evolutions in amorphous poly(lactic acid) with SAXS and WAXS measurements
  116. A model for the mechanical behavior and water uptake in gels sensitive to pH and temperature
  117. An Advanced Technological Lightweighted Solution for a Body in White
  118. Temperature dependence of poly(lactic acid) mechanical properties
  119. Thermal strain-induced cold crystallization of amorphous poly(lactic acid)
  120. A qualitative analysis of particle-induced viscosity reduction in polymeric composites
  121. Modeling the effects of temperature and pH on swelling of stimuli-responsive gels
  122. Double equilibrium melting temperatures and zero growth temperature of PVDF in PVDF/graphene composites
  123. Direct investigations of deformation and yield induced structure transitions in polyamide 6 below glass transition temperature with WAXS and SAXS
  124. Modeling the effects of pH and ionic strength on swelling of anionic polyelectrolyte gels
  125. Modeling the effects of pH and ionic strength on swelling of polyelectrolyte gels
  126. Swelling ofpH-sensitive hydrogels
  127. Crystalline structures and crystallization behaviors of poly(l-lactide) in poly(l-lactide)/graphene nanosheet composites
  128. Deformation and structure evolution of glassy poly(lactic acid) below the glass transition temperature
  129. Mechanical response of HEMA gel under cyclic deformation: Viscoplasticity and swelling-induced recovery
  130. Enhancement of mechanical properties of polypropylene by blending with styrene-(ethylene-butylene)-styrene tri-block copolymer
  131. Time-dependent response of hydrogels under constrained swelling
  132. Polypropylene/organoclay/SEBS nanocomposites with toughness–stiffness properties
  133. Erratum to: Sealing of polymer micro-structures by over-moulding
  134. Self-limiting lithiation of electrode nanoparticles in Li-ion batteries
  135. Stress–strain relations for hydrogels under multiaxial deformation
  136. How to tell if two different plastics can be welded
  137. Volume changes in hydrogels subjected to finite deformations
  138. Constitutive equations in finite elasticity of swollen elastomers
  139. Mechanical testing of polystyrene/polystyrene laser welds
  140. Effect of crystalline structure on the mechanical response of polypropylene under cyclic deformation
  141. Fading memory of loading history in polypropylene and a polypropylene/clay nanocomposite
  142. Multi-cycle deformation of semicrystalline polymers: Observations and constitutive modeling
  143. Investigation of Mechanical Properties of PP/Clay Nanocomposites Based on Network Cross-Linked Compatibilizers
  144. Investigation on high strength laser welds of polypropylene and high-density polyethylene
  145. Constitutive Modeling of the Mechanical Response of Nanocomposite Hydrogels for Tissue Engineering
  146. Cyclic viscoplasticity of semicrystalline polymers with finite deformations
  147. CYCLIC VISCOPLASTICITY OF SEMICRYSTALLINE POLYMERS WITH FINITE STRAINS: OBSERVATIONS AND CONSTITUTIVE MODELING
  148. Constitutive modeling of the viscoelastic and viscoplastic responses of metallocene catalyzed polypropylene
  149. Time-dependent response of polypropylene/clay nanocomposites under tension and retraction
  150. Influence of two compatibilizers on clay/PP nanocomposites properties
  151. Effect of multiple extrusions on the impact properties of polypropylene/clay nanocomposites
  152. Cyclic viscoelastoplasticity of polypropylene/nanoclay composites
  153. Cyclic viscoelastoplasticity of polypropylene/nanoclay hybrids
  154. Properties and Semicrystalline Structure Evolution of Polypropylene/Montmorillonite Nanocomposites under Mechanical Load
  155. Sealing of polymer micro-structures by over-moulding
  156. Activation energy of poly(methyl methacrylate) from rheometry and polymer welding
  157. Morphology study of layered silicate/chitosan nanohybrids
  158. Cyclic viscoelastoplasticity of polypropylene: effects of crystalline structure
  159. Nanomaterials in biomedical applications
  160. Effect of annealing on viscoplasticity of polymer blends: Experiments and modeling
  161. Viscoelasticity and viscoplasticity of polypropylene/polyethylene blends
  162. Mullins’ effect in semicrystalline polymers: experiments and modeling
  163. Nonlinear Viscoelastic Response of Thermoplastic-Elastomer Melts
  164. Nonlinear time-dependent response of polypropylene/nanoclay melts: Experiments and modeling
  165. Polypropylene/clay nanocomposites: mechanical response, damage, and fracture
  166. Viscoelasticity, viscoplasticity, and creep failure of polypropylene/clay nanocomposites
  167. Essential work of fracture and viscoplastic response of a carbon black-filled thermoplastic elastomer
  168. A model to predict creep failure in polypropylene
  169. Thermo-viscoplasticity of carbon black-reinforced thermoplastic elastomers
  170. Cyclic viscoplasticity of carbon black-filled thermoplastic elastomers: Experiments and modeling
  171. Cyclic thermo-viscoplasticity of carbon black-reinforced thermoplastic elastomers
  172. Viscoelasticity of polyethylene/montmorillonite nanocomposite melts
  173. Thermo-viscoelastic and viscoplastic behavior of high-density polyethylene
  174. Cyclic elastoplasticity of solid polymers
  175. Thermo-viscoelastic response of nanocomposite melts
  176. measurements of normal stresses in polymer melts
  177. Thermo-viscoelasticity of polymer melts: experiments and modeling
  178. Cyclic viscoplasticity of thermoplastic elastomers
  179. Viscoelasticity and viscoplasticity of semicrystalline polymers: Structure–property relations for high-density polyethylene
  180. Cyclic deformation of ternary nanocomposites: Experiments and modeling
  181. Cyclic viscoplasticity of solid polymers: The effects of strain rate and amplitude of deformation
  182. Cyclic viscoplasticity of high-density polyethylene: Experiments and modeling
  183. High density polyethylene and clay nano composite
  184. Constitutive equations for the nonlinear elastic response of rubbers
  185. A model for the mechanical behavior of thermoplastic elastomers
  186. Competing effect between filled glass bead and induced ? crystal on the tensile properties of polypropylene/glass bead blends
  187. Viscosity models for silicate melts
  188. Constitutive equations for the viscoplastic response of isotactic polypropylene in cyclic tests: The effect of strain rate
  189. Modelling the viscoplastic response of polyethylene in uniaxial loading–unloading tests
  190. Effect of high-temperature annealing on the elastoplastic response of isotactic polypropylene in loading-unloading tests
  191. The effect of annealing on the elastoplastic and viscoelastic responses of isotactic polypropylene
  192. Nonlinear time-dependent response of isotactic polypropylene
  193. The effect of annealing on the nonlinear viscoelastic response of isotactic polypropylene
  194. Finite viscoplasticity of semicrystalline polymers
  195. The effect of annealing on the viscoplastic response of semicrystalline polymers at finite strains
  196. Model for the viscoelastic and viscoplastic responses of semicrystalline polymers
  197. A Model for the Elastoplastic Behavior of Isotactic Poly(propylene) Below the Yield Point
  198. The effect of strain rate on the viscoplastic behavior of isotactic polypropylene at finite strains
  199. Model for anomalous moisture diffusion through a polymer-clay nanocomposite
  200. The effect of annealing on the elastoplastic response of isotactic polypropylene
  201. Physical aging in a hyperquenched glass
  202. The effect of annealing on the time-dependent behavior of isotactic polypropylene at finite strains
  203. Determination of the fictive temperature for a hyperquenched glass
  204. Influence of push–pull injection moulding on fibres and matrix of fibre reinforced polypropylene
  205. EFFECT OF CROSS-LINKING OF HIGH-DENSITY POLYETHYLENE. I. ON SPHERULITIC STRUCTURES
  206. Mechanical Properties of Isotactic Polypropylene with Oriented and Cross-hatched Lamellae Structure
  207. Sandwich Panel With a Periodical and Graded Core