All Stories

  1. Physicochemical Recycling of Cotton from Textile Waste Driven by the Ionic Liquid [DBNH][AcO] via Wet Spinning Through Factorial Design of Experiments

    Article • Applied Sciences, January 2026, MDPI AG

    Dr JD Badia

  2. Effect of cation’s alkyl chain length of imidazolium-driven PVDF-based supported ionic liquid membranes on the CO2 separation performance from biogas and flue gas

    Article • Carbon Capture Science & Technology, January 2026, Elsevier

    Dr JD Badia

  3. Abiotic Degradation Technologies to Promote Bio-Valorization of Bioplastics

    Article • Polymers, December 2025, MDPI AG

    Dr JD Badia

  4. Effects of Long Exposure to Dielectric Barrier Discharge on Films of Commercial Blends of Poly(Butylene Adipate-co-Terephthalate) (PBAT) and Thermoplastic Starch (TPS)

    Article • November 2025, MDPI AG

    Dr JD Badia

  5. Cellulose-Driven Supported Liquid Membranes with (Choline Chloride)-Based Deep Eutectic Solvents for CO2 Separation from Biogas

    Article • November 2025, MDPI AG

    Dr JD Badia

  6. Abiotic Surface Degradation Induced by Ozonation on Poly (Lactic Acid) (PLA)/Poly (Butylene Adipate-co-Terephthalate) (PBAT) Blends

    Article • November 2025, MDPI AG

    Dr JD Badia

  7. ChEngBoost: Vitaminised and gamified problem-based learning of chemical engineering bases in biotechnology

    Article • Education for Chemical Engineers, October 2025, Elsevier

    Dr JD Badia

  8. Hydrophobic PVDF‐Based Electrospun Nanofibrous Membranes: Design Criteria Fabrication and Resistance to Long‐Term Hydrodynamic Operation

    Article • Journal of Applied Polymer Science, July 2025, Wiley

    Dr JD Badia

  9. Advancing chemical engineering education: Amplifying active learning with Wooclap’s innovative pedagogical techniques

    Article • Education for Chemical Engineers, July 2025, Elsevier

    Dr JD Badia, Dr. Jordi Carrillo Abad

  10. PVDF Nanofiber Membranes for Dissolved Methane Recovery from Water Prepared by Combining Electrospinning and Hot-Pressing Methods

    Article • ACS Polymers Au, June 2025, American Chemical Society (ACS)

    Dr JD Badia

  11. FROM MOBILE PHONES TO LEARNING TOOLS: LEVERAGING WOOCLAP TO FOSTER INTERACTIVE AND STUDENT-CENTRED EDUCATION

    Article • June 2025, IATED Academy, S.L.

    Dr JD Badia, Dr. Jordi Carrillo Abad

  12. UV-C and UV-C/H₂O-Induced Abiotic Degradation of Films of Commercial PBAT/TPS Blends

    Article • Polymers, April 2025, MDPI AG

    Dr JD Badia

  13. Effect of Choline Chloride-Based DES on the Pore-Forming Ability and Properties of PVDF Membranes Prepared with Triethyl Phosphate as Green Solvent

    Article • Polymers, April 2025, MDPI AG

    Dr JD Badia

  14. Crosslinking optimization of sericin-based hydrogel membranes: A statistical approach to achieving stability and flexibility

    Article • Polymer Degradation and Stability, April 2025, Elsevier

    Dr JD Badia

  15. Ultrasonic chemo-thermal degradation of commercial poly(butylene adipate-co-terephthalate) (PBAT) and thermoplastic starch (TPS) blends

    Article • Polymer Degradation and Stability, February 2025, Elsevier

    Dr JD Badia

  16. Influence of Vinyl Acetate-Based and Epoxy-Based Compatibilizers on the Design of TPS/PBAT and TPS/PBAT/PBSA Films

    Article • Applied Sciences, January 2025, MDPI AG

    Dr JD Badia

  17. Mechanism and performance of the hydrolytic chemical recycling of polylactide catalyzed by the protic ionic liquid 2-HEAA

    Article • Resources Conservation and Recycling, November 2024, Elsevier

    Dr JD Badia

  18. A Review on the Application of Deep Eutectic Solvents in Polymer-Based Membrane Preparation for Environmental Separation Technologies

    Article • Polymers, September 2024, MDPI AG

    Dr JD Badia

  19. Factorial Analysis and Thermal Kinetics of Chemical Recycling of Poly(ethylene terephthalate) Aided by Neoteric Imidazolium-Based Ionic Liquids

    Article • Polymers, August 2024, MDPI AG

    Dr JD Badia

  20. The Impact of Green Physical Crosslinking Methods on the Development of Sericin-Based Biohydrogels for Wound Healing

    Article • Biomimetics, August 2024, MDPI AG

    Dr JD Badia

  21. Chemical recycling of post-consumer poly(ethylene terephthalate) (PET) driven by the protic ionic liquid 2-HEAA: Performance, kinetics and mechanism

    Article • Journal of Environmental Chemical Engineering, August 2024, Elsevier

    Dr JD Badia

  22. LEVELING UP CHEMICAL ENGINEERING: UTILIZING H5P FOR INTERACTIVE LEARNING AND ENHANCED STUDENT PERFORMANCE

    Article • July 2024, IATED Academy, S.L.

    Dr. Jordi Carrillo Abad, Dr JD Badia

  23. Influence of Hot-Pressing on the Morphology and Performance of Electrospun Pvdf Membranes for Gas-Liquid Membrane Technologies

    Article • January 2024, Elsevier

    Dr JD Badia

  24. Polysaccharide/Silica Microcapsules Prepared via Ionic Gelation Combined with Spray Drying: Application in the Release of Hydrophilic Substances and Catalysis

    Article • Polymers, October 2023, MDPI AG

    Dr JD Badia

  25. Stability of Superhydrophobicity and Structure of PVDF Membranes Treated by Vacuum Oxygen Plasma and Organofluorosilanisation

    Article • Membranes, March 2023, MDPI AG

    Dr JD Badia

  26. CORONA TREATMENT ACTIVATION FOR THE ORGANOFLUOROSILANISATION OF PVDF MEMBRANE. EFFECT OF THE LONG-TERM OPERATION IN THE HYDROPHOBICITY

    Article • January 2023, Grupo Pacifico

    Dr JD Badia

  27. SURFACE CHEMICAL MODIFICATION OF PVDF MEMBRANE BY OXYGEN PLASMA AND ORGANOFLUOROSILANISATION: STABILITY OF THE SUPERHYDROPHOBICITY AND STRUCTURE

    Article • January 2023, Grupo Pacifico

    Dr JD Badia

  28. Flat PVDF Membrane with Enhanced Hydrophobicity through Alkali Activation and Organofluorosilanisation for Dissolved Methane Recovery

    Article • Membranes, April 2022, MDPI AG

    Dr JD Badia

  29. Potential of phosphonium-based ionic liquids to purify 1-propanol from water by liquid–liquid extraction at mild conditions

    Article • The Journal of Chemical Thermodynamics, February 2022, Elsevier

    Dr JD Badia

  30. Recovery of dissolved methane through a flat sheet module with PDMS, PP, and PVDF membranes

    Article • Separation and Purification Technology, February 2022, Elsevier

    Dr JD Badia

  31. The Role of Eucalyptus Species on the Structural and Thermal Performance of Cellulose Nanocrystals (CNCs) Isolated by Acid Hydrolysis

    Article • Polymers, January 2022, MDPI AG

    Dr JD Badia

  32. Conductive polycaprolactone/gelatin/polyaniline nanofibres as functional scaffolds for cardiac tissue regeneration

    Article • Reactive and Functional Polymers, January 2022, Elsevier

    Dr Pilar Sepulveda, Dr Imelda Ontoria-Oviedo, Dr JD Badia

  33. Analysis of plasticization and reprocessing effects on the segmental cooperativity of polylactide by dielectric thermal spectroscopy

    Article • Polymer, May 2021, Elsevier

    Dr JD Badia

  34. Molecular Mobility in Oriented and Unoriented Membranes Based on Poly[2-(Aziridin-1-yl)ethanol]

    Article • Polymers, March 2021, MDPI AG

    Dr JD Badia

  35. Contextualized project-based learning for training chemical engineers in graphic expression

    Article • Education for Chemical Engineers, January 2021, Elsevier

    Dr JD Badia

  36. Surface modification of membranes for methane degassing from water: preliminary study on hydrophobicity and performance

    Article • October 2020, Grupo Pacifico

    Dr JD Badia

  37. Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

    Article • Polymer Degradation and Stability, October 2020, Elsevier

    Dr JD Badia

  38. Polycaprolactone/gelatin-based scaffolds with tailored performance: in vitro and in vivo validation

    Article • Materials Science and Engineering C, February 2020, Elsevier

    Dr Imelda Ontoria-Oviedo, Dr Pilar Sepulveda, Dr JD Badia

  39. Crosslinked chitosan/poly(vinyl alcohol)-based polyelectrolytes for proton exchange membranes

    Article • Reactive and Functional Polymers, September 2019, Elsevier

    Dr Jalel Labidi, Dr JD Badia

  40. Performance of Polyester-Based Electrospun Scaffolds under In Vitro Hydrolytic Conditions: From Short-Term to Long-Term Applications

    Article • Nanomaterials, May 2019, MDPI AG

    Dr JD Badia, José Badia

  41. Dielectric spectroscopy of novel thiol-ene/epoxy thermosets obtained from allyl-modified hyperbranched poly(ethyleneimine) and diglycidylether of bisphenol A

    Article • European Polymer Journal, April 2019, Elsevier

    Dr JD Badia

  42. Crosslinked Sulfonated Poly(vinyl alcohol)/Graphene Oxide Electrospun Nanofibers as Polyelectrolytes

    Article • Nanomaterials, March 2019, MDPI AG

    Dr JD Badia

  43. Functionalised Poly(Vinyl Alcohol)/Graphene Oxide as Polymer Composite Electrolyte Membranes

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2019, Computers, Materials and Continua (Tech Science Press)

    Dr JD Badia

  44. Thermal kinetics for the energy valorisation of polylactide/sisal biocomposites

    Article • Thermochimica Acta, December 2018, Elsevier

    Dr JD Badia

  45. Polylactide-based self-reinforced composites biodegradation: Individual and combined influence of temperature, water and compost

    Article • Polymer Degradation and Stability, December 2018, Elsevier

    Dr JD Badia

  46. Influence of chitin nanocrystals on the dielectric behaviour and conductivity of chitosan-based bionanocomposites

    Article • Composites Science and Technology, October 2018, Elsevier

    Dr JD Badia, Dr Jalel Labidi

  47. Electrospun Poly(ethylene-co-vinyl alcohol)/Graphene Nanoplatelets Composites of Interest in Intelligent Food Packaging Applications

    Article • Nanomaterials, September 2018, MDPI AG

    Dr JD Badia

  48. Reduction of Nitrates in Waste Water through the Valorization of Rice Straw: LIFE LIBERNITRATE Project

    Article • Sustainability, August 2018, MDPI AG

    Dr JD Badia

  49. Workshops of innovation in chemical engineering to train communication skills in science and technology

    Article • Education for Chemical Engineers, July 2018, Elsevier

    Dr JD Badia

  50. In vitro validation of biomedical polyester-based scaffolds: Poly(lactide- co -glycolide) as model-case

    Article • Polymer Testing, April 2018, Elsevier

    Dr JD Badia, Dr Imelda Ontoria-Oviedo, Dr Pilar Sepulveda

  51. Tailored electrospun nanofibrous polycaprolactone/gelatin scaffolds into an acid hydrolytic solvent system

    Article • European Polymer Journal, April 2018, Elsevier

    Dr JD Badia

  52. Thermal and thermo-oxidative stability and kinetics of decomposition of PHBV/sisal composites

    Article • Chemical Engineering Communications, December 2017, Taylor & Francis

    Professor Monica Ek, Dr JD Badia

  53. Effect of sisal and hydrothermal ageing on the dielectric behaviour of polylactide/sisal biocomposites

    Article • Composites Science and Technology, September 2017, Elsevier

    Dr JD Badia

  54. Relevant factors for the eco-design of polylactide/sisal biocomposites to control biodegradation in soil in an end-of-life scenario

    Article • Polymer Degradation and Stability, September 2017, Elsevier

    Dr JD Badia

  55. Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation

    Article • Journal of Applied Polymer Science, July 2017, Wiley

    Dr JD Badia

  56. Long-term properties and end-of-life of polymers from renewable resources

    Article • Polymer Degradation and Stability, March 2017, Elsevier

    Dr JD Badia

  57. Effect of the dissolution time into an acid hydrolytic solvent to tailor electrospun nanofibrous polycaprolactone scaffolds

    Article • European Polymer Journal, February 2017, Elsevier

    Dr JD Badia

  58. Suitability of Blends from Virgin and Reprocessed Polylactide: Performance and Energy Valorization Kinetics

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2017, Scrivener Publishing

    Dr JD Badia

  59. Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques

    Article • European Polymer Journal, November 2016, Elsevier

    Dr JD Badia

  60. Impact of hydrothermal ageing on the thermal stability, morphology and viscoelastic performance of PLA/sisal biocomposites

    Article • Polymer Degradation and Stability, October 2016, Elsevier

    Dr JD Badia

  61. Análisis DAFO creativo colaborativo para desarrollar la competencia de innovación, creatividad y emprendimiento

    Article • July 2016, Universitat Politecnica de Valencia

    Dr JD Badia

  62. On-line quizzes to evaluate comprehension and integration skills

    Article • Journal of Technology and Science Education, June 2016, Omnia Publisher SL

    Dr JD Badia

  63. Novel silicon microparticles to improve sunlight stability of raw polypropylene

    Article • European Polymer Journal, September 2015, Elsevier

    Dr JD Badia

  64. Dynamic Mechanical Thermal Analysis of Polymer Blends

    Article • October 2014, Wiley

    Dr JD Badia

  65. Hydrothermal ageing of polylactide/sisal biocomposites. Studies of water absorption behaviour and Physico-Chemical performance

    Article • Polymer Degradation and Stability, October 2014, Elsevier

    Dr JD Badia

  66. Water absorption and hydrothermal performance of PHBV/sisal biocomposites

    Article • Polymer Degradation and Stability, October 2014, Elsevier

    Dr JD Badia

  67. Dielectric spectroscopy of recycled polylactide

    Article • Polymer Degradation and Stability, September 2014, Elsevier

    Dr JD Badia

  68. A kinetic study of the formation of smectic phases in novel liquid crystal ionogens

    Article • European Polymer Journal, June 2013, Elsevier

    Dr JD Badia

  69. Characterization of Functionalized Side-Chain Liquid Crystal Methacrylates Containing Nonmesogenic Units by Dielectric Spectroscopy

    Article • Industrial & Engineering Chemistry Research, January 2013, American Chemical Society (ACS)

    Dr JD Badia

  70. Thermal and thermo-oxidative stability of reprocessed poly(ethylene terephthalate)

    Article • Journal of Analytical and Applied Pyrolysis, January 2013, Elsevier

    Dr JD Badia

  71. Hygrothermal ageing of reprocessed polylactide

    Article • Polymer Degradation and Stability, October 2012, Elsevier

    Dr JD Badia

  72. Reprocessed polylactide: Studies of thermo-oxidative decomposition

    Article • Bioresource Technology, June 2012, Elsevier

    Dr JD Badia

  73. A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: Pyrolysis of reprocessed polylactide

    Article • Bioresource Technology, May 2012, Elsevier

    Dr JD Badia

  74. Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance

    Article • Polymer Degradation and Stability, April 2012, Elsevier

    Dr JD Badia

  75. The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)

    Article • Polymer Degradation and Stability, January 2012, Elsevier

    Dr JD Badia

  76. Assessing the MALDI-TOF MS sample preparation procedure to analyze the influence of thermo-oxidative ageing and thermo-mechanical degradation on poly (Lactide)

    Article • European Polymer Journal, July 2011, Elsevier

    Dr JD Badia

  77. A statistical design of experiments for optimizing the MALDI-TOF-MS sample preparation of polymers. An application in the assessment of the thermo-mechanical degradation mechanisms of poly (ethylene terephthalate)

    Article • Analytica Chimica Acta, April 2011, Elsevier

    Dr JD Badia

  78. Thermal analysis applied to the characterization of degradation in soil of polylactide: II. On the thermal stability and thermal decomposition kinetics

    Article • Polymer Degradation and Stability, November 2010, Elsevier

    Dr JD Badia

  79. Thermal analysis applied to the characterization of degradation in soil of polylactide: I. Calorimetric and viscoelastic analyses

    Article • Polymer Degradation and Stability, November 2010, Elsevier

    Dr JD Badia

  80. Thermal analysis as a quality tool for assessing the influence of thermo-mechanical degradation on recycled poly(ethylene terephthalate)

    Article • Polymer Testing, April 2009, Elsevier

    Dr JD Badia

  81. A Thermogravimetric Approach to Study the Influence of a Biodegradation in Soil Test to a Poly(lactic acid)

    Article • Macromolecular Symposia, November 2008, Wiley

    Dr JD Badia