Contact

All Stories

  1. 1-D time-based simulation of shape memory alloy phase transformation using a constitutive-resistance model

    Article • Canadian Metallurgical Quarterly, October 2025, Taylor & Francis

    Dr. Jamal A.-K. Mohammed

  2. Effect of automated airflow regulation on indirect solar dryer performance: comparative study

    Article • Bulletin of the Tomsk Polytechnic University Geo Assets Engineering, June 2025, National Research Tomsk Polytechnic University

    Dr. Jamal A.-K. Mohammed

  3. Design and implementation of jerk-controlled elevator systems using S-curve motion profiles

    Article • International Journal of Power Electronics and Drive Systems (IJPEDS), June 2025, Institute of Advanced Engineering and Science

    Dr. Jamal A.-K. Mohammed

  4. Comparative Performance Analysis of a PCM-based Solar Dryer under Natural Air Circulation Conditions

    Article • Evergreen, June 2025, Japan Society of Ski Sciences

    Dr. Jamal A.-K. Mohammed

  5. Modelling and analysis of shape memory alloys in COMSOL

    Article • Canadian Metallurgical Quarterly, May 2025, Taylor & Francis

    Dr. Jamal A.-K. Mohammed

  6. The effect of automated airflow regulation on the performance of an indirect solar dryer: a comparative study

    Article • Russian Physics Journal, March 2025, Springer Science + Business Media

    Dr. Jamal A.-K. Mohammed

  7. Design and implementation of pneumatic actuators in a dual-axis solar tracker under the climatic conditions of karbala city

    Article • Renewable Energy, February 2025, Elsevier

    Dr. Jamal A.-K. Mohammed

  8. Comparison of fuzzy logic and adaptive neuro-fuzzy inference system techniques in controlling pneumatic solar tracker

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  9. Effect of accumulator type on electro-hydraulic actuator performance

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  10. Implementation of an open-loop single-axis solar PV tracker driven by pneumatic actuator

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  11. Investigation of the impact of air gap length on the electromagnetic efficiency of eddy current brakes

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  12. Jerk optimization in elevator control: A comparative study of direct torque and field-oriented control techniques

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  13. Optimization process for using palm fiber and ultrasonic wave as a drag-reducing agent in crude oil pipelines

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  14. Firefighting robot control and monitoring using a smartphone application

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  15. Improvements of the Mecanum wheels on the robot’s platform placed in various directions

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  16. Investigation of the impact of conductive disk thickness on the electromagnetic efficiency of eddy current brakes

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  17. Optimization process for ultrasonic treatment of heavy crude oil

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  18. Position control of hydraulic system driven by variable speed pump with VFD-controlled induction motor

    Article • January 2025, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  19. A Comprehensive Review of Solar Tracking Technologies: A Survey with Future Directions

    Article • Kerbala Journal for Engineering Sciences, December 2024, College of Engineering - University of Kerbala

    Dr. Jamal A.-K. Mohammed

  20. Enhancing Elevator Ride Quality through Vector Control Techniques and S-Curve Profiles

    Article • Engineering Technology & Applied Science Research, December 2024, Engineering, Technology & Applied Science Research

    Dr. Jamal A.-K. Mohammed

  21. Modeling and Implementation of an Open-loop Single-axis Solar Tracking System Driven by an SMA Spring Actuator

    Article • Evergreen, December 2024, Japan Society of Ski Sciences

    Dr. Jamal A.-K. Mohammed

  22. Design of an Electric Elevator Drive with High Riding Quality under Jerk Control

    Article • Engineering Technology & Applied Science Research, October 2024, Engineering, Technology & Applied Science Research

    Dr. Jamal A.-K. Mohammed

  23. Design of Pneumatic Actuators for Driving a Two-Axis PV Solar Tracker under Iraqi Climate Conditions

    Article • Evergreen, September 2024, Japan Society of Ski Sciences

    Dr. Jamal A.-K. Mohammed

  24. Simulation of Pneumatic Actuators under Fuzzy Logic Control for Driving Solar Tracking System

    Article • Evergreen, September 2024, Japan Society of Ski Sciences

    Dr. Jamal A.-K. Mohammed

  25. Analysis of Permanent Magnet Material Influence on Eddy Current Braking Efficiency

    Article • Iraqi Journal for Electrical And Electronic Engineering, July 2024, University of Basrah - College of Engineering - Engineering Science Journal

    Dr. Jamal A.-K. Mohammed

  26. An Experimental Investigation for Flow Characteristics of Heavy Oil in Pipe Lines Using Dilution Technique With Different Solvents

    Article • Iraqi Journal of Oil and Gas Research (IJOGR), April 2024, University of Technology

    Dr. Jamal A.-K. Mohammed

  27. Modeling and control of a high-quality electro-hydraulic actuator driven via an induction motor under intelligent indirect vector control

    Article • Engineering and Technology Journal, March 2024, University of Technology

    Dr. Jamal A.-K. Mohammed

  28. Effect of the material properties of the rotor-disc on the performance of eddy current braking systems

    Article • Engineering and Technology Journal, February 2024, University of Technology

    Dr. Jamal A.-K. Mohammed

  29. Defect detection of rolling element bearings rotor system using vibration measurements of bearings base

    Article • January 2024, American Institute of Physics

    Tariq Hammza, Dr. Jamal A.-K. Mohammed

  30. Implementation of a rotating machines monitoring system based on lateral vibrations measurements

    Article • January 2024, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  31. Optimization of Agricultural Drying Using PCM-based Automated Indirect Solar Dryers

    Article • Russian Physics Journal, December 2023, Springer Science + Business Media

    Dr. Jamal A.-K. Mohammed

  32. Performance Enhancement of Solar Air Heater by Integrating Innovative Absorber Design and Automatic Control Flow Rate

    Article • Evergreen, September 2023, Japan Society of Ski Sciences

    Dr. Jamal A.-K. Mohammed

  33. AUTOMATED TEMPERATUREAND HUMIDITY CONTROL AND MONITORING SYSTEM FOR IMPROVING THE PERFORMANCE IN DRYING SYSTEM

    Article • Eurasian Physical Technical Journal, June 2023, Buketov Karaganda State University

    Dr. Jamal A.-K. Mohammed

  34. Performance Enhancement of a Single Pass Solar Air Heater by Adopting Wire Mesh Absorber Layer

    Article • Evergreen, June 2023, Japan Society of Ski Sciences

    Dr. Jamal A.-K. Mohammed

  35. PERFORMANCE IMPROVEMENTOF SOLAR DRYER USINGAN AUXILIARY HEAT SOURCE UNDER DIFFERENT VALUES OF AIRFLOW RATES

    Article • Eurasian Physical Technical Journal, March 2023, Buketov Karaganda State University

    Dr. Jamal A.-K. Mohammed

  36. A review on the employment of the hydraulic cylinder for lifting purposes

    Article • Indonesian Journal of Electrical Engineering and Computer Science, December 2022, Institute of Advanced Engineering and Science

    Dr. Jamal A.-K. Mohammed

  37. Modeling and simulation of electro-hydraulic telescopic elevator system controlled by programmable logic controller

    Article • Indonesian Journal of Electrical Engineering and Computer Science, July 2022, Institute of Advanced Engineering and Science

    Dr. Jamal A.-K. Mohammed

  38. Modeling and Simulation of Telescopic Hydraulic for Elevating Purposes

    Article • Engineering and Technology Journal, January 2022, University of Technology

    Dr. Jamal A.-K. Mohammed

  39. Design and Implementation of an Electromechanical Brake System

    Article • Engineering and Technology Journal, January 2022, University of Technology

    Dr. Jamal A.-K. Mohammed

  40. Optimization of Design Parameters for Manufacturing a Radial Active Magnetic Bearing with 12-Poles

    Article • Engineering and Technology Journal, January 2022, University of Technology

    Dr. Jamal A.-K. Mohammed

  41. Genetic algorithm based optimal design of an active magnetic bearing used in high rotational speed machines

    Article • January 2022, American Institute of Physics

    Dr. Muhannad Zaidan Khalifa, Dr. Jamal A.-K. Mohammed

  42. Electrical Engineering - Electric Machines and Drives - Elevators

    Article • January 2022, American Institute of Physics

    Dr. Jamal A.-K. Mohammed

  43. Numerical Analysis of Linear Elevator Structure Using Finite Element Method

    Article • Engineering and Technology Journal, September 2021, University of Technology

    Dr. Jamal A.-K. Mohammed

  44. Variable Speed Drives in Electric Elevator Systems: A Review

    Article • Journal of Physics Conference Series, August 2021, Institute of Physics Publishing

    Dr. Jamal A.-K. Mohammed

  45. Modeling and Simulation of an Electromechanical Brake System

    Article • IOP Conference Series Materials Science and Engineering, June 2021, Institute of Physics Publishing

    Dr. Jamal A.-K. Mohammed

  46. Assessment of disturbed voltage supply effects on steady-state performance of an induction motor

    Article • International Journal of Electrical and Computer Engineering (IJECE), June 2020, Institute of Advanced Engineering and Science

    Dr. Jamal A.-K. Mohammed

  47. Performance Improvement of a Conventional Hydraulic Elevator by Using Electro-Hydraulic Servo Mechanism

    Article • Engineering and Technology Journal, May 2020, University of Technology

    Dr. Jamal A.-K. Mohammed

  48. Design and implementation of a single-side flat synchronous linear motor model

    Article • IOP Conference Series Materials Science and Engineering, March 2020, Institute of Physics Publishing

    Dr. Jamal A.-K. Mohammed

  49. Voltage disturbance mitigation in Iraq's low voltage distribution system

    Article • Indonesian Journal of Electrical Engineering and Computer Science, January 2020, Institute of Advanced Engineering and Science

    Dr. Jamal A.-K. Mohammed

  50. Design and Optimization of a Surface-Mounted Permanent-Magnet Linear Synchronous Motor with Maxwell ANSYS

    Article • Al-Khwarizmi Engineering Journal, August 2019, Al-Khwarizmi Engineering Journal

    Dr. Jamal A.-K. Mohammed

  51. Performance Enhancement of Photovoltaic Panel Using Double-sides Water Glazing Chambers Cooling Technique

    Article • Al-Nahrain Journal for Engineering Sciences, March 2019, Al-Nahrain Journal for Engineering Sciences

    Dr. Jamal A.-K. Mohammed

  52. Design and Implementation of an Automatic Control for Two Axis Tracking System for Applications of Concentrated Solar Thermal Power

    Article • Al-Khwarizmi Engineering Journal, December 2018, Al-Khwarizmi Engineering Journal

    Dr. Jamal A.-K. Mohammed

  53. Thermal Performance Analysis of Parabolic Trough Solar Concentrator with Helical Tube Receiver

    Article • Al-Nahrain Journal for Engineering Sciences, September 2018, Al-Nahrain Journal for Engineering Sciences

    Dr. Jamal A.-K. Mohammed

  54. Efficiency Enhancement of a Dual-axis Solar PV Panel Tracker Using Water-Flow Double Glazing Technique

    Article • Al-Khwarizmi Engineering Journal, August 2018, Al-Khwarizmi Engineering Journal

    Dr. Jamal A.-K. Mohammed

  55. Efficiency Enhancement of a Dual-axis Solar PV Panel Tracker Using Water-Flow Double Glazing Technique

    Article • Al-Khwarizmi Engineering Journal, August 2018, Al-Khwarizmi Engineering Journal

    Dr. Jamal A.-K. Mohammed

  56. Investigation of high performance split air conditioning system by using Hybrid PID controller

    Article • Applied Thermal Engineering, January 2018, Elsevier

    Dr. Jamal A.-K. Mohammed

  57. Using Smart Control System to Enhancement the Split Air Conditioning System Performance

    Article • Al-Khwarizmi Engineering Journal, December 2017, Al-Khwarizmi Engineering Journal

    Dr. Jamal A.-K. Mohammed

  58. Economical design of H-bridge multilevel inverter drive controlled by modified fast algorithm

    Article • Microelectronics Reliability, October 2016, Elsevier

    Dr. Jamal A.-K. Mohammed