All Stories

  1. Computation analysis of Si waveguides on AlN substrate with GaN cladding
  2. Computational analysis of AgXSe2 (X = Ga, Sb)-based 2 T tandem solar cell: A pathway to >39% efficiency
  3. Machine learning-aided modeling and absorption optimization in stacked-absorber heterojunction solar cells
  4. Theoretical analysis of the novel samarium nickelate (SmNiO₃)-based broadband terahertz (THz) metamaterial absorbers
  5. Comprehensive Investigations on the Electronic and Transport Properties of Au 3 VX 4 (X = S, Se, Te) Compounds via DFT Study for Applications in TPV C...
  6. Electronic, optical, and transport properties of ternary α3Vβ4 (α = Cu, Ag, and β = S, Se, Te) for energy harvesting: A DFT insights
  7. Synthesis of copper iodide (CuI) thin films by DC magnetron sputtering and insight into its properties for photonic applications
  8. Theoretical insights into the electronic structures and transport properties of Ag3TaX4 (X = S, Se, Te) compounds for energy applications
  9. III–V compound-based solar cell technologies
  10. 3D Modeling and Optimization of BaZrS3 and SrHfSe3 Absorbers-Based Inorganic Perovskite Tandem Solar Cell
  11. Numerical Optimization of a Highly Efficient Two Terminal CZTS–ZnSnAs 2 ‐Based Tandem Solar Cell
  12. Unfolding the potential of the AgSbSe 2 chalcogenide for advancements in solar cell and photodetector technologies
  13. Exploration of AgXSe2 (X=Ga, Sb)-Based 2T Tandem Solar Cell: A Pathway to >39% Efficiency
  14. Studies on the non-linear optical properties of spin coated ZnTe thin films for application in photonic Mach-Zehnder modulator
  15. Structural, electronic and optical behaviors of BaGa2X2 (X = P, As, Sb) Zintl compounds: A first-principles approach for PV applications
  16. Simulation Driven Insights Into CuGaTe 2 Based Solar Cells and Photodetectors
  17. Computational Analysis of a GST‐Based Long‐Wave Infrared Microring Resonator on a ZnSe Platform as a Photonic Sensor
  18. Design and simulation of GaSe hybrid photonic waveguides on a β-Ga2O3 platform
  19. Theoretical design and insight of Fe2GeS4-based optoelectronic devices
  20. Numerical investigations on CdTe-based rectangular photonic waveguides
  21. Wideband GeTe-based near-perfect THz metamaterial absorber for 6G applications
  22. Transition metal induced magnetic semiconductor-half metallic-metallic transformation of ferromagnetic LaβO3 (β = Cr, Mn, Fe): A DFT insights
  23. Nitrogen vibrational states population enhancement by series arc discharge plasma jet and its application to nitrogen fixation
  24. Numerical analysis of ternary chalcopyrite-type ZnGeAs2-based photosensor and solar cell
  25. Discovering the inherent properties of CdS/TiTe2/Cu2Te near infrared photodetector: A computational analysis
  26. Synthesis of ZnSe thin films by solution-processed spin coating method for photonic integration applications
  27. Theoretical Sagacity of an Efficient Cu2ZnGeSe4‐Based Thin Film Solar Cell and Photodetector
  28. Synthesis of ZnSe thin films by solution-processed spin coating method for photonic integration applications
  29. Thiol-amine co-solvents aided direct synthesis of ZnTe thin films by spin coating for low cost optoelectronic applications
  30. Machine learning assisted revelation of the best performing single hetero-junction thermophotovoltaic cell
  31. Modeling of Ag3AuS2-based NIR photodetector with BaSi2 BSF layer for superior detectivity
  32. Probing the impact of WSe2 back surface layer in Cu3VSe4 thin film solar cell towards high efficiency
  33. Theoretical Revelation of Cu3BiS3‐Based Thin Film PV Cell Exerting Various Carrier Transport Layers
  34. Theoretical insights onto CuTlS2 semiconductor towards efficient solar cell and photosensor
  35. A Comprehensive Study on CdGeP2‐Based Photonic Device for Dual Applications in Solar Cell and Photodetector
  36. Design and Optimization of CdSe–CuSbSe2‐Based Double‐Junction Two‐Terminal Tandem Solar Cells With VOC > 2.0 V and PCE Over 42%
  37. Numerical Simulation to Achieve High Efficiency in CuTlSe2–Based Photosensor and Solar Cell
  38. Back-to-Back Two-Terminal Tandem Solar Cells for Enhanced Bidirectional Light Harvesting
  39. Design and analysis of inorganic tandem architecture with synergistically optimized BaSnS3 top and AgTaS3 bottom perovskite Sub-Cells
  40. Numerical probing into the role of experimentally developed ZnTe window layer in high-performance Ag3AuSe2 photodetector
  41. Computational analysis of a Cu3VS4-based solar cell with a V2O5 back surface layer
  42. Comprehensive study on the optoelectronic properties of ZnSnP2 compound by DFT and simulation for the application in a photodetector
  43. Preparation of V2O5–Ink for the Fabrication of V2O5 Thin Films by the Spin Coating Method
  44. Machine Learning-Enabled performance exploration to unveil the potential of AuCuSe4 in thermophotovoltaic cell
  45. Numerical evaluation and optimization of high sensitivity Cu2CdSnSe4 photodetector
  46. Design and simulation of BeSiP2-based high-performance solar cell and photosensor
  47. Numerical Expedition on the Potential of AgBiS2-Based Thin Film Solar Cells Employing Different Carrier Transport Layers
  48. Modeling and Numerical Insights of TiSe2 Compound‐Based Photodetector
  49. Highly Efficient Cadmium telluride Solar Cell with a Thin CuInTe2 Current Booster: Theoretical Insights
  50. Theoretical insights into narrow bandgap CuFeS2 chalcopyrite for thermophotovoltaic applications
  51. Design and simulation of a high performance Ag3CuS2 jalpaite-based photodetector
  52. Theoretical insights towards a highly responsive AgInSe2 photodetector
  53. A theoretical analysis to reveal the prospects of MoS2 as a back surface field layer in TiS3-based near infrared photodetector
  54. Reply to: Letter to the editor of Heliyon re design and optimization of a high efficiency CdTe–FeSi2 based double-junction two-terminal tandem solar cell. Heliyon. 10 (2024) e27994
  55. Temperature dependent resistivity switching in CuxO thin films chemically synthesized from high pressure plasma-deposited copper iodide
  56. Correction to: Design of a High Efficiency p-Si Based Heterojunction Solar Cell with ln2S3 Window and NiO BSF Layers
  57. Unveiling the potentiality of a self-powered CGT chalcopyrite-based photodetector: theoretical insights
  58. Design of a High Efficiency p-Si Based Heterojunction Solar Cell with ln2S3 Window and NiO BSF Layers
  59. Design and optimization of a high efficiency CdTe–FeSi2 based double-junction two-terminal tandem solar cell
  60. Modeling and efficiency enhancement of SnSe thin film solar cell with a thin CIS layer
  61. Numerical simulation on an efficient n-CdS/p-ZnSnN2/p+-Cu2SnS3/p++- CuGaSe2 thin film solar cell
  62. A highly efficient n‐CdS/p‐Ag2S/p+‐SnS thin film solar cell: Design and simulation
  63. Current Remedy in Ultrathin Crystalline Si Solar Cell by Cu2SnS3 Thin Film toward High Efficiency
  64. Emerging II-VI wide bandgap semiconductor device technologies
  65. Computational analysis on the role of an AGT current enhancer in a CZTS-based thin film solar cell
  66. Design and performance evaluation of all-inorganic AgTaS3 perovskite solar cells
  67. Design and Simulation of a High‐Efficiency CuInS2 Thin‐Film Solar Cell with a Thin CIS Current Augmenter
  68. Numerical simulation of all-inorganic two-terminal AlSb/Al0.15Ga0.85Sb tandem solar cell with high-open circuit voltage (>1.90 V) and >40% conversion efficiency
  69. Exploring the potential of GeTe for the application in Thermophotovoltaic (TPV) cell
  70. Theoretical exploration of high VOC in Cu2SnS3 thin film solar cells towards high efficiency
  71. Numerical investigation on the role of ZnTe back surface layer in an efficient CuInS2 thin film solar cell
  72. Synthesis of Transparent CuI Thin Films by a Facile Low‐Cost High Pressure (HP)‐PECVD Method at Room Temperature for the Application in Solar Cells
  73. Group IV Mid-Infrared Thermophotovoltaic Cells on Silicon
  74. Numerical studies on a ternary AgInTe2 chalcopyrite thin film solar cell
  75. A highly efficient n-CdS/p-Ag2S/p+-SnS thin film solar cell: design and performance
  76. Design of a highly efficient n-CdS/p-AgGaTe2/p+-SnS double-heterojunction thin film solar cell
  77. Design of an efficient AgInSe 2 chalcopyrite‐based heterojunction thin film solar cell
  78. Design of n-CdS/p-CuInTe₂/p+-MoS₂ thin film solar cell with a power conversion efficiency of 34.32%
  79. Unraveling the effects of a GeSe BSF layer on the performance of a CuInSe2 thin film solar cell: a computational analysis
  80. Numerical modeling of CuSbSe2-based dual-heterojunction thin film solar cell with CGS back surface layer
  81. Solution-Processed Photodetectors
  82. Numerical prediction on the photovoltaic performance of CZTS‐based thin film solar cell
  83. Concurrent investigation of antimony chalcogenide (Sb2Se3 and Sb2S3)-based solar cells with a potential WS2 electron transport layer
  84. First-principles calculations to investigate structural, elastic, electronic, thermodynamic, and thermoelectric properties of CaPd3B4O12 (B = Ti, V) perovskite
  85. Numerical simulation on the impurity photovoltaic (IPV) effect in c-Si wafer-based dual-heterojunction solar cell
  86. Unraveling the nonlinear optical behaviors of indium selenide thin films prepared by spin coating method
  87. Theoretical insight into the enhancement of longer-wavelength light absorption in silicon solar cell with multilevel impurities
  88. First-principles calculations to investigate physical properties of single-cubic (Ba0.82K0.18)(Bi0.53Pb0.47)O3 novel perovskite superconductor
  89. A review on recent applications and future prospects of rare earth oxides in corrosion and thermal barrier coatings, catalysts, tribological, and environmental sectors
  90. Theoretical insights into a high-efficiency Sb2Se3-based dual-heterojunction solar cell
  91. Simulation approach to reach the SQ limit in CIGS-based dual-heterojunction solar cell
  92. Numerical Simulation on the Impurity Photovoltaic (Ipv) Effect in C-Si Wafer-Based Dual-Heterojunction Solar Cell
  93. Design of a highly efficient FeS2-based dual-heterojunction thin film solar cell
  94. Design guidelines for a highly efficient high-purity germanium (HPGe)-based double-heterojunction solar cell
  95. Unveiling the prospect of a novel chemical route for synthesizing solution-processed CdS/CdTe thin-film solar cells
  96. Simulating the performance of a high-efficiency SnS-based dual-heterojunction thin film solar cell
  97. Computational investigation on the photovoltaic performance of an efficient GeSe-based dual-heterojunction thin film solar cell
  98. Design and simulation of double-heterojunction solar cells based on Si and GaAs wafers
  99. A systematic study of how annealing conditions lead to the application-based microstructural, crystallographic, morphological, and optical features of spin-coated CdS thin-films
  100. Design of a highly efficient CdTe-based dual-heterojunction solar cell with 44% predicted efficiency
  101. Effect of CdS and In3Se4 BSF layers on the photovoltaic performance of PEDOT:PSS/n-Si solar cells: Simulation based on experimental data
  102. State-of-the-Art of Solution-Processed Crystalline Silicon/Organic Heterojunction Solar Cells: Challenges and Future
  103. Stress-induced phase-alteration in solution processed indium selenide thin films during annealing
  104. Design and simulation of high performance CH3NH3Pb(I1-xClx)3 based perovskite solar cell using CeOx ETL and NiO HTL
  105. A numerical simulation of high efficiency CdS/CdTe based solar cell using NiO HTL and ZnO TCO
  106. Structural, surface morphological and optical properties and their correlation with the thickness of spin coated superior quality CdS thin film synthesized using a novel chemical route
  107. Guidelines for a highly efficient CuI/n-Si heterojunction solar cell
  108. Synthesis of Self-Assembled Randomly Oriented VO2 Nanowires on a Glass Substrate by a Spin Coating Method
  109. Solution-Processed Synthesis of Copper Oxide (CuxO) Thin Films for Efficient Photocatalytic Solar Water Splitting
  110. Enhancement the Performance of CdS/CdTe Heterojunction Solar Cell Using TiO2/ZnO Bi-layer ARC and V2O5 BSF layers: A Simulation Approach
  111. Enhancing the open circuit voltage of the SnS based heterojunction solar cell using NiO HTL
  112. Newly synthesized A-site ordered cubic-perovskite superconductor (Ba0.54K0.46)4Bi4O12: A DFT investigation
  113. A novel CdTe ink-assisted direct synthesis of CdTe thin films for the solution-processed CdTe solar cells
  114. Effect of Triton X-100 surfactant on thiol-amine cosolvents assisted facile synthesized CdS thin films on glass substrate by spin coating method
  115. Design and Simulation of FeSi 2 ‐Based Novel Heterojunction Solar Cells for Harnessing Visible and Near‐Infrared Light
  116. Investigation of thin-film p-BaSi2/n-CdS heterostructure towards semiconducting silicide based high efficiency solar cell
  117. A novel synthesis and characterization of transparent CdS thin films for CdTe/CdS solar cells
  118. Performance enhancement of CIGS-based solar cells by incorporating an ultrathin BaSi2 BSF layer
  119. Optimization of multilayer anti-reflection coatings for efficient light management of PEDOT:PSS/c-Si heterojunction solar cells
  120. Unveiling the electrical and thermoelectric properties of highly degenerate indium selenide thin films: indication of In3Se4 phase
  121. Electronic Structure of In3–xSe4 Electron Transport Layer for Chalcogenide/p-Si Heterojunction Solar Cells
  122. Unraveling the electrical properties of solution-processed copper iodide thin films for CuI/n-Si solar cells
  123. Role of facile synthesized V2O5 as hole transport layer for CdS/CdTe heterojunction solar cell: Validation of simulation using experimental data
  124. Optimization of multilayer antireflection coatings for improving performance of silicon solar cells
  125. Study on the Performance of ZnO/CuO Heterojunction Solar Cell Simulation and Experimental
  126. Comparative study of thin-film solar cells
  127. CaxBa1–xNb2O6 Ferroelectric Nanopowders for Ultrahigh-Density Optical Data Storage
  128. Crystalline-Si heterojunction with organic thin-layer (HOT) solar cell module using poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)
  129. High near-infrared transmittance, high intense orange luminescence in vanadium doped indium oxide (V: In2O3) thin films deposited by electron beam evaporation
  130. Barium hydroxide hole blocking layer for front- and back-organic/crystalline Si heterojunction solar cells
  131. Electrical and Optical Transport Characterizations of Electron Beam Evaporated V Doped In2O3 Thin Films
  132. Nafion-Modified PEDOT:PSS as a Transparent Hole-Transporting Layer for High-Performance Crystalline-Si/Organic Heterojunction Solar Cells with Improved Light Soaking Stability
  133. Correlation between the fine structure of spin-coated PEDOT:PSS and the photovoltaic performance of organic/crystalline-silicon heterojunction solar cells
  134. Effect of substrate bias on mist deposition of conjugated polymer on textured crystalline-Si for efficient c-Si/organic heterojunction solar cells
  135. Investigating the chemical mist deposition technique for poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) on textured crystalline-silicon for organic/crystalline-silicon heterojunction solar cells
  136. Solution-processed crystalline silicon double-heterojunction solar cells
  137. Temperature effect on the electrical properties of undoped NiO thin films