All Stories

  1. Analysis and Design of Load-Independent Class-E Zero-Voltage Switching Power Oscillator
  2. Impacts of Overlay Topologies and Peer Selection on Latencies in IoT Blockchain
  3. Investigating Impacts of Uneven Node Distribution and Cross-Shard Transactions on Sharding IoT-Blockchain Systems
  4. ML-Based Fully-Numerical Design Method for Load-Independent Class-EF WPT Systems
  5. Evaluating MPQUIC schedulers in dynamic wireless networks with 2D and 3D mobility
  6. Phase-Shift Controlled Push-Pull Class-E Inverter With Diode Balance for Load Impedance Variations
  7. Quantum-Annealing-Based Sum Rate Maximization for Multi-UAV-Aided Wireless Networks
  8. Simultaneous Wireless Power and Data Transfer System With Reconfigurable Load-Independent Class-E Inverter
  9. Biological mimesis based on the WiBIC platform: Modeling of Pavlovian conditioning
  10. Pre-processing of CSI signal for Wi-Fi sensing-based motion detection
  11. Analysis of Load-Independent ZCS Parallel-Resonant Inverter With Constant Current
  12. Load-Independent Class-E Frequency Multipliers
  13. Analysis and Design of Load-Independent Series Resonant Power Amplifier With Constant Current Output and Its Application for WPT System
  14. VT-MCNet: High-Accuracy Automatic Modulation Classification Model Based on Vision Transformer
  15. Analysis and Design of High-Frequency WPT System Using Load-Independent Inverter With Robustness Against Load Variations and Coil Misalignment
  16. QoE Provisioning System for VoIP and Video Streaming Using Software-Defined Networking and IOTA Micropayment
  17. Design Procedure of Load-Independent Class-E WPT Systems and Its Application in Robot Arm
  18. An Accurate Platform for Investigating TCP Performance in Wi-Fi Networks
  19. Self-Tuned Series Resonant Power Oscillator with Load-independent Operation
  20. Simulator-Based Optimization Software for High-Frequency Power-Electronics Circuits
  21. Fine-grained QoS provisioning with micropayments in wireless networks
  22. Hybrid Quantum Convolutional Neural Networks for UWB Signal Classification
  23. CellularFlow: Memristive Circuits of Gyrator Neurons Toward Brain Circuits
  24. A Comparison of Blockchain Recovery Time in Static and Mobile IoT-Blockchain Networks
  25. On the Latency Performance in Private Blockchain Networks
  26. Load‐independent inverse class‐E ZVS inverter and its application to wireless power transfer systems
  27. Generalized Analysis of Load-Independent ZCS Parallel-Resonant Inverter
  28. Implementation of P4-Based Schedulers for Multipath Communication
  29. Signal Preprocessing Technique With Noise-Tolerant for RF-Based UAV Signal Classification
  30. Wireless power transfer system with load-independent inverse class-E oscillator
  31. Empowering 5G Mobile Devices With Network Softwarization
  32. Decentralizing Private Blockchain-IoT Network with OLSR
  33. High‐frequency single‐switch PFC with frequency‐modulation controlled class‐E2 converter
  34. Early Wake-Up Ahead Node for Fast Code Dissemination in Wireless Sensor Networks
  35. Comprehensive and Simplified Numerical Design Procedure for Class-E Switching Circuits
  36. Frequency-Modulation Controlled Load-Independent Class-E Inverter
  37. Continuous Class-F Power Amplifier Using Quasi-Elliptic Low-Pass Filtering Matching Network
  38. Design of Class-EM Amplifier with Consideration of Parasitic Nonlinear Capacitances and On-State Resistance
  39. Locking Range Maximization in Injection-Locked Class-E Oscillator—A Case Study for Optimizing Synchronizability
  40. Context-aware collect data with energy efficient in Cyber–physical cloud systems
  41. Throughput Analysis of IEEE 802.11 WLANs with Inter-Network Interference
  42. An automated design procedure for class-E amplifier
  43. Analysis and Design of Generalized Class-E/F2 and Class-E/F3 Inverters
  44. Generalized Analysis and Performance Investigation of the Class-E/Fn Rectifiers
  45. Novel Design Approach of Soft-Switching Resonant Converter With Performance Visualization Algorithm
  46. Throughput and Delay Analysis of IEEE 802.11-Based Tree-Topology Networks
  47. Steady-State Analysis of Class-E Shunt Inductor Inverter Outside ZCS and ZDCS Conditions
  48. Rigorous Analytical Model of Saturated Throughput for the IEEE 802.11p EDCA
  49. Throughput Analysis for IEEE 802.11 Multi-Hop Networks Considering Transmission Rate
  50. An Evaluation of Multipath TCP in Lossy Environment
  51. Frequency-Controlled Resonant Converter With Push-Pull Class-E Inverter
  52. An Approach to Reinforce Multipath TCP with Path-Aware Information
  53. Analysis of Class-DE PA Using MOSFET Devices With Non-Equally Grading Coefficient
  54. A Software Defined Networking Approach for Guaranteeing Delay in Wi-Fi Networks
  55. Implementation of Spiking Neural Network with Wireless Communications
  56. Experimental Evaluations of Thinned-Out and PDM Controlled Class-D Rectifier
  57. Analysis and Study of the Duty Ratio Effects on the Class-EM Power Amplifier Including MOSFET Nonlinear Gate-to-Drain and Drain-to-Source Capacitances
  58. Analysis and Design of Phase-Controlled Class-D ZVS Inverter
  59. XOR learning by spiking neural network with infrared communications
  60. Pre- and Post-Regulation Control of High-frequency Magnetic-Resonance Wireless Power Transfer System with Class-D Rectifier
  61. Subnominal Operation of Class-E Nonlinear Shunt Capacitance Power Amplifier at Any Duty Ratio and Grading Coefficient
  62. Phase-Controlled Class-D ZVS Inverter with Clamp Diodes
  63. Inverter/rectifier technologies on WPT systems
  64. A Novel High-Speed SiC MOSFET Driver with a Low Switch-Voltage Stress
  65. Analysis of class-D ZVS inverter with asymmetrical duty-cycle control for wireless power transfer applications
  66. Output Power Capability Comparisons of Class-E Power Amplifiers with Harmonic Resonance
  67. Throughput and Delay Analysis of IEEE 802.11 String-Topology Multi-Hop Network in TCP Traffic with Delayed ACK
  68. Design of Class E Power Amplifier with New Structure and Flat Top Switch Voltage Waveform
  69. Generalized analytical expressions for end-to-end throughput of IEEE 802.11 string-topology multi-hop networks
  70. Outside Nominal Operation Analysis and Design Considerations of Inverse-Class-E Power Amplifier
  71. A Novel Analysis Procedure for Class E Oscillator
  72. Analysis and Design of Wireless Power Transfer System with Asymmetrical Duty-Cycle Controlled Class-D ZVS Inverter
  73. Special section on recent progress in nonlinear theory and its applications
  74. A novel approach for achieving ZVS operation in class-D ZVS inverter
  75. Distributed cooperative communication nodes control and optimization reliability for resource-constrained WSNs
  76. APMD: A fast data transmission protocol with reliability guarantee for pervasive sensing data communication
  77. Implementation and evaluation of pre- and post-regulation control with class-e2wireless power transfer system
  78. The phase-controlled class-D ZVS inverter with current protection
  79. A flyback converter using power-MOSFETs to achieve high-frequency operation beyond 10MHz
  80. Design of wireless power transfer system with Class E inverter and half-bridge Class DE rectifier at any fixed coupling coefficient
  81. Proposal and analysis of class-E/F<inf>3</inf> rectifier
  82. A Delay‐Aware Congestion Control Protocol for Wireless Sensor Networks
  83. High-speed driver for SiC MOSFET based on class-E inverter
  84. Steady-State Analysis of Isolated Class-E$^2$ Converter Outside Nominal Operation
  85. Efficient Thread Mapping for Heterogeneous Multicore IoT Systems
  86. Energy-Efficient Broadcasting Scheme for Smart Industrial Wireless Sensor Networks
  87. Bottom-up analysis concept for throughput and delay analyses of wireless multi-hop networks
  88. Quality assessment of streaming services in mobile devices
  89. A Class-E Power Amplifier Design Considering MOSFET Nonlinear Drain-to-Source and Nonlinear Gate-to-Drain Capacitances at Any Grading Coefficient
  90. New class-E rectifier with low voltage stress
  91. Power-flow simulation with visualization function based on IEEE common data format
  92. Channel assignment for multi-interface multi-hop wireless networks
  93. Analysis and design of class E power amplifier considering MOSFET parasitic input and output capacitances
  94. Design procedure for wireless power transfer system with inductive coupling-coil optimizations using PSO
  95. Small-signal analysis of closed-loop PWM boost converter in CCM with complex impedance load
  96. A throughput aware with collision-free MAC for wireless LANs
  97. FFSC: An Energy Efficiency Communications Ap-proach for Delay Minimizing in Internet of Things
  98. A Trust-Based Model for Security Cooperating in Vehicular Cloud Computing
  99. Design and Analysis of Multi-Channel MAC Protocol with Channel Grouping in Wireless Ad-Hoc Networks
  100. Orthogonal‐Gradient Measurement Matrix Construction Algorithm
  101. Small-World-Network Model Based Routing Method for Wireless Sensor Networks
  102. Steady-State Analysis and Design of Class-D ZVS Inverter at Any Duty Ratio
  103. Throughput Analysis of WLANs in Saturation and Non-Saturation Heterogeneous Conditions with Airtime Concept
  104. Analysis and Design of Loosely Inductive Coupled Wireless Power Transfer System Based on Class-<formula formulatype="inline"><tex Notation="TeX">${\rm E}^{2}$</tex></formula> DC-DC Converter for Efficiency Enhancement
  105. Class-D inverter with MOSFET nonlinear parasitic capacitance
  106. Class-E2 inductive power transfer system with pre- and post-regulators
  107. Electrical Characteristics of AlGaAs/GaAs Heterostructures With a Pair of 2-D Electron and Hole Channels
  108. A design of inductively coupled wireless power transfer system with coupling coil optimization
  109. Light-weight performance analysis of Wi-Fi offload using mean-field approximation
  110. Design of a DC-DC Converter With Phase-Controlled Class-D ZVS Inverter
  111. A Low Latency, Energy Efficient MAC Protocol for Wireless Sensor Networks
  112. End-to-end throughput and delay analysis for IEEE 802.11 string topology multi-hop network using Markov-chain model
  113. Steady-State Analysis and Design of Class-DE Inverter at Any Duty Ratio
  114. Analytical design for resonant inductive coupling wireless power transfer system with class-E inverter and class-DE rectifier
  115. Throughput analysis of wireless networks with tethering function
  116. End-to-End Delay Analysis for IEEE 802.11 String-Topology Multi-Hop Networks
  117. End-to-end throughput analysis for IEEE 802.11e EDCA string-topology wireless multi-hop networks
  118. Generalized Design Considerations and Analysis of Class-E Amplifier for Sinusoidal and Square Input Voltage Waveforms
  119. Special section on network sciences and engineering
  120. Analytical design procedure for resonant inductively coupled wireless power transfer system with class-DE inverter and class-E rectifier
  121. Locking Range Derivations for Injection-Locked Class-E Oscillator Applying Phase Reduction Theory
  122. Multi-channel MAC protocol with channel grouping in wireless ad-hoc network
  123. Numerical algorithm for distribution-map derivations of switching converters
  124. Analysis, Design, and Implementation of the Class-E ZVS Power Amplifier With MOSFET Nonlinear Drain-to-Source Parasitic Capacitance at any Grading Coefficient
  125. Loosely coupled inductive wireless power transfer systems with class-E transmitter and multiple receivers
  126. Analytical design procedure for resonant inductively coupled wireless power transfer system with class-E<sup>2</sup> DC-DC converter
  127. Multiphase resonant inverters with common resonant circuit
  128. Analysis and Design of Class-${\rm E}_{\rm M}$ Power Amplifier
  129. Modeling and Analysis of Class-E Amplifier With a Shunt Inductor at Sub-Nominal Operation for Any Duty Ratio
  130. Waveform Equations, Output Power, and Power Conversion Efficiency for Class-E Inverter Outside Nominal Operation
  131. Class E2 resonant non-radiative Wireless Power Transfer link: A design-oriented joint circuit-system co-characterization approach
  132. MOSFET parasitic capacitance effects to class-DE power amplifier
  133. Analysis and Design of Class-E Power Amplifier With MOSFET Parasitic Linear and Nonlinear Capacitances at Any Duty Ratio
  134. Design of high-efficiency inductive-coupled wireless power transfer system with class-DE transmitter and class-E rectifier
  135. Promotional effect of Au on reduction of Ni(II) to form Au–Ni alloy catalysts for hydrogenolysis of benzylic alcohols
  136. High-frequency high-efficiency resonant converter with class-EM inverter and class-E rectifier
  137. Performance Study of Class-E Power Amplifier With a Shunt Inductor at Subnominal Condition
  138. Consideration of interference between parallel connected class D amplifiers operated at different switching frequencies
  139. Effect of MOSFET parasitic capacitances on EER transmitter with class-E amplifier
  140. Numerical derivations of locking ranges for injection-locked class-E oscillator
  141. Inductively coupled wireless power transfer with class-DE power amplifier
  142. An asynchronous multi-channel MAC protocol with Pulse/Tone exchange for RTS collision avoidance
  143. Design of Class-E$_{\rm M}$ Oscillator With Second Harmonic Injection
  144. A directional MAC protocol with the DATA-frame fragmentation and short busy advertisement signal for mitigating the directional hidden node problem
  145. Push-Pull Class-${\rm E}_{\rm M}$ Power Amplifier for Low Harmonic-Contents and High Output-Power Applications
  146. A numerical approach to calculate grazing bifurcation points in an impact oscillator with periodic boundaries
  147. ALLEVIATING THE SPARSITY PROBLEM OF COLLABORATIVE FILTERING USING AN EFFICIENT ITERATIVE CLUSTERED PREDICTION TECHNIQUE
  148. Backoff-stage synchronization in three-hop string-topology wireless networks with hidden nodes
  149. Bifurcation analysis of the class-E inverter for switching-pattern derivations
  150. MAC Protocol for Ad Hoc Networks Using Smart Antennas for Mitigating Hidden and Deafness Problems
  151. Particle swarm optimization for design of class-E amplifier
  152. Design of symmetric class-E<inf>M</inf> power amplifier
  153. Design of Class-E Amplifier With MOSFET Linear Gate-to-Drain and Nonlinear Drain-to-Source Capacitances
  154. Power conversion efficiency of class-E power amplifier outside nominal operation
  155. Analytical Expression of Maximum Throughput for Long-Frame Communications in One-way String Wireless Multihop Networks
  156. Novel Design Procedure for Class-${\rm E}_{\rm M}$ Power Amplifiers
  157. Isolated class-E switching converter with high-frequency high-efficiency operation for low-voltage/high-current output applications
  158. Analysis of Class-DE Amplifier With Linear and Nonlinear Shunt Capacitances at 25% Duty Ratio
  159. Analytical expressions of maximum throughput for long-frame communications in one-way string wireless multihop networks
  160. Effect of MOSFET gate-to-drain parasitic capacitance on class-E power amplifier
  161. Maximum throughput analysis for RTS/CTS-used IEEE 802.11 DCF in wireless multi-hop networks
  162. Analysis of Class DE Amplifier With Nonlinear Shunt Capacitances at Any Grading Coefficient for High $\displaystyle Q$ and 25 $\displaystyle $ % Duty Ratio
  163. Computer-aided design for class-E switching circuits taking into account optimized inductor designs
  164. Mixed Noise Removal for Images Using the FINDRM with the Directional Difference and the BSF in the Dual-Tree Complex Wavelet Transform Domain
  165. Collaborative filtering based on an iterative prediction method to alleviate the sparsity problem
  166. Analysis and Design of Class DE Amplifier With Nonlinear Shunt Capacitances
  167. An efficient collaborative filtering algorithm using SVD-free latent Semantic indexing and particle swarm optimization
  168. Design of AC resonant inductors using area product method
  169. Design of class-E<inf>M</inf> power amplifier with one input signal
  170. Design of class-DE amplifier with linear and nonlinear shunt capacitances for 25 % duty ratio
  171. A New Framework of Removing Salt and Pepper Impulse Noise for the Noisy Image Including Many Noise-Free White and Black Pixels
  172. Analysis and Experiments of Maximum Throughput in Wireless Multi-Hop Networks for VoIP Application
  173. Design Procedure for Class E Switching Circuits Allowing Implicit Circuit Equations
  174. Spatial Data Compression Techniques for GML
  175. A fuzzy switching filter for removing impulse noise
  176. Design of Class-E<inf>M</inf> power amplifier taking into account auxiliary circuit
  177. Compatibility between sports-utility vehicles and sedan-type vehicles
  178. Identification and Characterization of Two Strains of Human Parechovirus 4 Isolated from Two Clinical Cases in Fukuoka City, Japan
  179. An interleaved class E<sup>2</sup> dc/dc converter
  180. Design of class DE amplifier with nonlinear shunt capacitances for any output Q
  181. Design of Class DE Amplifier with Nonlinear Shunt Capacitances for Any Output Q
  182. NOVEL DESIGN PROCEDURE FOR CLASS DE AMPLIFIER
  183. Analysis and Design of Class DE Amplifier with Nonlinear Shunt Capacitance
  184. Design of Class DE Inverter with Second Order Constant K Band-Pass Filter
  185. Simple adaptive control for SISO nonlinear systems using multiple neural networks
  186. Sliding mode control using neural networks for SISO nonlinear systems
  187. Post-Processing for Restoring Edges and Removing Artifacts of Low Bit Rates Wavelet-Based Image
  188. Use Minimum Graph Cut Based On Hybrid Algorithm For Motion Segmentation
  189. Design of Class DE Inverter with Band-pass Filter
  190. Resonant DC–DC Converter With Class-E Oscillator
  191. Investigation of Class E Amplifier with Nonlinear Capacitance for Any Output Q and Finite DC-Feed Inductance
  192. Phase control for resonant DC-DC converter with class-DE inverter and class-E rectifier
  193. Noise Removal for Degraded Images Using Trimmed Filter and Neural Filters
  194. Design of Phase-Controlled Class E Inverter With Asymmetric Circuit Configuration
  195. FM/PWM Control Scheme in Class DE Inverter
  196. A Kalman estimator using two directions of angular velocity
  197. Design of generalized class E2 dc/dc converter
  198. Noise Removal for Degraded Images with Impulse Noise Using Median Filters and Neural Filters
  199. Computation of design values for Class E amplifiers without using waveform equations
  200. A multisensor tracking system with an airborne sensor to mitigate the effect of cross‐range errors
  201. Investigation of not‐in‐phase synchronization on coupled system of four oscillators
  202. Synchronization of self‐switching phenomena on full‐coupled chaotic oscillators
  203. Resonant DC/DC converter with class DE inverter and class E rectifier using thinned-out method (deleting some of the pulses to the rectifier)
  204. Design of a high-efficiency class DE tuned power oscillator
  205. New control scheme for class DE inverter by varying driving signals
  206. A Random-valued Impulse Noise Detector Using Level Detection
  207. Design of class E amplifier with any output Q and nonlinear capacitance on MOSFET
  208. Optimization procedure of class E amplifiers using SPICE
  209. Resonant dc/dc converter with class E oscillator
  210. Combining RNN equalizer with SOM detector
  211. Computation of design values for class E amplifier without using waveform equations