All Stories

  1. Engineering defects in MoS2 cathodes for high-performance aqueous zinc-ion batteries
  2. Core–Shell-Architected Active Sites from a Prussian Blue Analogue Enable Bifunctional Oxygen Electrocatalysis for High-Performance Rechargeable Zinc–Air Batteries
  3. Phase Formation and Elemental Transport in the Electrosynthesis of Nickel Ferrite by Sacrificial Iron Anode in Nickel Salt Solution
  4. Dual‐Driven Activation of High‐Valence States in Prussian Blue Analogues Via Graphene‐Quantum Dots and Ozone‐Induced Surface Restructuring for Superior Hydrogen Evolution Electrocatalyst
  5. Hydrothermal alkaline treatment of lignocellulosic biomass for microcrystalline cellulose generation at subcritical water
  6. Enhancing the Photoelectrochemical Activity of CuO/ZnO Junction Photocathodes for Water Splitting
  7. Acid hydrolysis roles in transformation of cellulose-I into cellulose-II for enhancing nitrocellulose performance as an energetic polymer
  8. Spray-dried porous silica using an anionic surfactant template for advanced photoluminescence support via ultrasound-assisted deposition
  9. Cellulose‐Based Hydrogel Polymer Electrolyte Derived from Coir Fiber for High‐Performance Lead‐Acid Batteries
  10. Electro-assisted alignment of coir fiber cellulose aerogel with low tortuosity channels for solar steam generation
  11. The Enhancement Discharge Performance by Zinc-Coated Aluminum Anode for Aluminum–Air Battery in Sodium Chloride Solution
  12. Controlling N-Doping Nature at Carbon Aerogels from Biomass for Enhanced Oxygen Reduction in Seawater Batteries
  13. Solar-driven water purification for sustainable clean water supply
  14. Tandem surface engineering of graphene quantum dot-assisted fluorinated NiFe Prussian blue analogue for electrocatalytic oxygen evolution reaction
  15. Preparation of monodisperse ZnO/SiO2 composite particles using spray drying with an anionic surfactant template and their photoluminescence characteristics
  16. Hydrophobic Modification of Sulfonated Carbon Aerogels from Coir Fibers To Enhance Their Catalytic Performance for Esterification
  17. Electrocapacitive and electrocatalytic performances of hydrochar prepared by one-step hydrothermal carbonization without further activation
  18. Foams stabilized with silica nanoparticles derived from sodium silicate for gas well liquid unloading
  19. Engineering Materials to Enhance Light-to-Heat Conversion for Efficient Solar Water Purification
  20. Fabrication of Hydrophobic Cellulose Aerogels from Renewable Biomass Coir Fibers for Oil Spillage Clean-Up
  21. High-performance electrocatalyst made from lignosulfonate nanofiber composited with manganese dioxide without carbonation process
  22. Preparation of rGO/MnO2 Composites through Simultaneous Graphene Oxide Reduction by Electrophoretic Deposition
  23. The effect of sodium lauryl sulfate on silica nanofluid stabilization using microbubble method
  24. One-step electrochemical synthesis of silica-coated magnetite nanofluids
  25. A performance study of magnetite-lignin composites as photothermal materials in solar steam generation system
  26. Sulfonated Mesoporous Silica-Carbon Composite Derived from a Silicate-Polyethylene Glycol Gel and Its Application as Solid Acid Catalysts
  27. Preparation of activated carbon from alkali lignin using novel one-step process for high electrochemical performance application
  28. Nitrogen-Doped Carbon Aerogels Prepared by Direct Pyrolysis of Cellulose Aerogels Derived from Coir Fibers Using an Ammonia–Urea System and Their Electrocatalytic Performance toward the Oxygen Reduction Reaction
  29. Activated carbon nanofibers derived from coconut shell charcoal for dye removal application
  30. Carbonization of Lignin Extracted from Liquid Waste of Coconut Coir Delignification
  31. Sulfonated carbon aerogel derived from coir fiber as high performance solid acid catalyst for esterification
  32. Novel monopolar arrangement of multiple iron electrodes for the large-scale production of magnetite nanoparticles for electrochemical reactors
  33. Production of cellulose aerogels from coir fibers via an alkali–urea method for sorption applications
  34. The Morphology of Si-K-HAs Composite Prepared by Spray Drying
  35. Banana Peel Activated Carbon in Removal of Dyes and Metals Ion in Textile Industrial Waste
  36. Sorption Efficiency in Dye Removal and Thermal Stability of Sorghum Stem Aerogel
  37. Fabrication of Interlayer-free P123 Caronised Template Silica Membranes for Water Desalination: Conventional Versus Rapid Thermal Processing (CTP vs RTP) Techniques
  38. Formation of Carbon Fibres From Polymer Poly(vinyl alcohol)/Acetylene Black using Electrospinning Method
  39. High-throughput production of magnetite nanoparticles prepared by the monopolar arrangement of iron electrodes in water
  40. Review on the method to prepare magnetite nanoparticles by the electrochemical
  41. Manganese dioxide nanoparticles synthesized by electrochemical method and its catalytic activity towards oxygen reduction reaction
  42. Synthesis of Silica Xerogels Obtained in Organic Catalyst via Sol Gel Route
  43. Silica-coated magnetite nanoparticles prepared by the one-step electrochemical method for dye removal
  44. The Effects of the Addition of Silica Mol Fraction (x = 1.5; 2; 2.5) as a Solid Electrolyte on Ion Conductivity of NASICON (Na1-xZr2SixP3-xO12) Using Solid-State Method
  45. Electrophoretic deposition of silica on the anodized stainless steel
  46. Modeling and Simulation of Aluminum Nanoparticle Synthesis by the Evaporation-Condensation Process Using the Nodal Method
  47. An Experimental and Theoretical Investigation of the Formation of Hydroxyapatite Particles Prepared by an Electrochemical Method
  48. PEG-templated mesoporous silicas using silicate precursor and their applications in desiccant dehumidification cooling systems
  49. Synthesis of mesoporous silica with controlled pore structure from bagasse ash as a silica source
  50. Magnetite thin film on mild steel formed by hydrothermal electrolysis for corrosion prevention
  51. A facile method for the production of high-surface-area mesoporous silica gels from geothermal sludge
  52. Using bagasse ash as a silica source when preparing silica aerogels via ambient pressure drying
  53. A facile method to prepare high-purity magnetite nanoparticles by electrooxidation of iron in water using a pulsed direct current
  54. Kinetic Model of LiFePO4 Formation Using Non-Isothermal Thermogravimetric Analysis
  55. Coating Steel with Nanosilica by Pulsed Direct Current Electrophoresis for Corrosion Protection
  56. Preparation of Sulfonate Grafted Silica/Chitosan-Based Proton Exchange Membrane
  57. Particle formation of hydroxyapatite precursor containing two components in a spray pyrolysis process
  58. To enhance the purity and crystallinity of magnetite nanoparticles prepared by surfactant-free electrochemical method by imposing higher voltage
  59. Preparation of thermal insulator of silica from waterglass using electrophorectic deposition
  60. Effect of fuel rate and annealing process of LiFePO4 cathode material for Li-ion batteries synthesized by flame spray pyrolysis method
  61. A versatile electrochemical method to produce nanoparticles of manganese oxides by KMnO4 electrolysis
  62. Electrochemical synthesis of nanosized hydroxyapatite by pulsed direct current method
  63. Electrodeposition of hydroxyapatite‐SiO2 composite particles for biomedical applications
  64. Hydrophobic Silica Coating Based on Waterglass on Copper by Electrophoretic Deposition
  65. Synthesis of Fe3O4/C composite as electrochemical capacitor in aqueous electrolytes
  66. The rule of carrier gas flow rate to Li+ diffusivity of LiFePo4 particles as lithium battery application
  67. Influence of formic acid on electrochemical properties of high-porosity Pt/TiN nanoparticle aggregates
  68. Thermal stability of silica-coated magnetite nanoparticles prepared by an electrochemical method
  69. Synthesis of magnetite nanoparticles by surfactant-free electrochemical method in an aqueous system
  70. One-step synthesis of silica-coated magnetite nanoparticles by electrooxidation of iron in sodium silicate solution
  71. Mesoporous silicas prepared from sodium silicate using gelatin templating
  72. Influence of the Synthesis Conditions on the Properties of Fe[sub 3]O[sub 4] Nanoparticles Prepared by Surfactant-Free Electrochemical Method
  73. Diffusion Flame Synthesis of Hydroxyapatite Nanoparticles using Urea Assisted Precursor Solution
  74. Synthesis of Silica Aerogel from Bagasse Ash by Ambient Pressure Drying
  75. A facile method for production of high-purity silica xerogels from bagasse ash
  76. Macro-instability characteristic in agitated tank based on flow visualization experiment and large eddy simulation
  77. Nanoparticle formation through solid-fed flame synthesis: Experiment and modeling
  78. Numerical Analysis of Macro-Instability Characteristic in a Stirred Tank by Means of Large Eddy Simulations: Off-Bottom Clearance Effect
  79. Modeling and Simulation of Aluminum Nanoparticle Synthesis by the Evaporation-Condensation Process Using the Nodal Method
  80. Suppression of particle generation in a plasma process using a sine-wave modulated rf plasma
  81. Observation of Heat-Induced Particle Resuspension and Transport in a Plasma Chemical Vapor Deposition Chamber
  82. Incorporation of Dust Particles into a Growing Film During Silicon Dioxide Deposition from a TEOS/O2Plasma
  83. Removal of particles during plasma processes using a collector based on the properties of particles suspended in the plasma
  84. Modeling of and experiments on dust particle levitation in the sheath of a radio frequency plasma reactor
  85. Particle Formation and Trapping Behavior in a TEOS/O2Plasma and Their Effects on Contamination of a Si Wafer
  86. Characterization of particle contamination in process steps during plasma-enhanced chemical vapor deposition operation
  87. Characterization of fine particle trapping in a plasma-enhanced chemical vapor deposition reactor
  88. An experimental and theoretical investigation of rarefied gas flow through circular tube of finite length
  89. Visualization and numerical simulation of fine particle transport in a low-pressure parallel plate chemical vapor deposition reactor
  90. Effect of Particle Size on Simulation of Three-Dimensional Solid Dispersion in Stirred Tank
  91. CVD Material Processing. Effects of Pressure and Gas Feed Rate on Growth Rate Profile of GaN Thin Film in Vertical MOCVD Reactor.