All Stories

  1. Hollow Ni-Intercalated ZIF-67 Integrated with PVDF-Derived Carbon Sheets for High-Performance Supercapacitor Electrodes
  2. Controlling the oxidation degree of graphene for improving the electrochemical performance of Ni-rich cathodes
  3. Techno-economic analysis of organic acid-based hydrometallurgical recycling of NCM cathodes
  4. Carbonization and structural evolution of bituminous coal-derived carbons material toward supercapacitor applications
  5. 3D printed 2D materials for tissue engineering applications
  6. N, O-Functionalized Curcumin-Derived Carbon Dots for Reactive Oxygen Species Regulation: Mechanistic Insights into Biomedical Applications
  7. Microflower CuS:Ni as a negative electrode with battery-type behavior for all transition-metal-sufides-based high-performance asymmetric supercapacitors
  8. pH-Triggered Phase Transitions, Coexposure of (001) and (110) Facets, and Oxygen Vacancies in BiOCl Photocatalysts
  9. Revealing the Dual Role of Ammonia in the Hydroxide Co‐Precipitation Synthesis of Cobalt‐Free Nickel‐Rich LiNi0.9Mn0.05Al0.05O2 (NMA955) Cathode Materials for Lithium‐Ion Batteries
  10. Alleviating Voltage Hysteresis by Interconnecting Truncated Octahedral LiNi0.5Mn1.5O4 Cathode Particles Using Exfoliated Graphene
  11. Toxicity assessment and bioimaging potential of carbon dots synthesized from banana peel in zebrafish model
  12. Enhanced syngas production through dry reforming of methane with Ni/CeZrO2 catalyst: Kinetic parameter investigation and CO2-rich feed simulation
  13. Exploring quantum confinement signature in nitrogen-functionalized graphene quantum dots: Effective mass approximation (EMA) model insights from computational and experimental analyses
  14. A High‐Performance, Low Defected, and Binder‐Free Graphene‐Based Supercapacitor Obtained via Synergistic Electrochemical Exfoliation and Electrophoretic Deposition Process
  15. Flexible Photothermal Membrane Based on PVA/Carbon Dot Hydrogel Films for High-Performance Interfacial Solar Evaporation
  16. High Volumetric Energy Density Supercapacitor of Additive-Free Quantum Dot Hierarchical Nanopore Structure
  17. Theoretical Investigation of the Green-Synthesized Carbon-Based Nanomaterial Potential as Inhibitors of ACE2 for Blocking SARS-CoV-2 Binding
  18. Machine Learning-Guided Synthesis of Room-Temperature Phosphorescent Carbon Dots for Enhanced Phosphorescence Lifetime and Information Encryption
  19. Unveiling the role of dopants in boosting CuS supercapacitor performance: insights from first-principles calculations
  20. Functionalized Phytochemicals-Embedded Carbon Dots Derived from Medicinal Plant for Bioimaging Application
  21. Cationic surfactant assisted electrostatic self-assembly of nitrogen-rich carbon enwrapped silicon anode: Unlocking high lithium storage performance
  22. Recent progress on reduced graphene oxide and polypyrrole composites for high performance supercapacitors: A review
  23. Porphyrin-derived carbon dots for an enhanced antiviral activity targeting the CTD of SARS-CoV-2 nucleocapsid
  24. Curcumin-derived carbon-dots as a potential COVID-19 antiviral drug
  25. Toward high-rate capability of intercalation cathodes Li-ion batteries, potency for fast-charging application: A materials perspective
  26. Role of LiTFSI Salt Content and Salt Crystallization on Carboxymethyl Chitosan-Based Solid Polymer Electrolytes for Stable Li Metal Batteries
  27. Recent Progress in Colloidal Quantum Dot Thermoelectrics
  28. Para Grass-Derived Porous Carbon-Rich SiOx/C as a Stable Anode for Lithium-Ion Batteries
  29. Iron-Decorated Nitrogen/Boron co-Doped Reduced Graphene Oxide Aerogel for Neutral Rechargeable Zn-Air Batteries
  30. Enhancing quantum capacitance of iron sulfide supercapacitor through defect-engineering: A first-principles calculation
  31. Highly efficient sandwich design thin film luminescent solar concentrators based on blue and green emissive MAPbBr3 perovskites nanostructures
  32. Advances and Perspective of Noble-Metal-Free Nitrogen-Doped Carbon for pH-Universal Oxygen Reduction Reaction Catalysts
  33. Interface Analysis of LiCl as a Protective Layer of Li1.3Al0.3Ti1.7(PO4)3 for Electrochemically Stabilized All-Solid-State Li-Metal Batteries
  34. In Vitro and Silico Studies on the N-Doped Carbon Dots Potential in ACE2 Expression Modulation
  35. Modulating Photothermal Properties of Carbon Dots through Nitrogen Incorporation Enables Efficient Solar Water Evaporation
  36. Cobalt Nanoparticles Encapsulated with N-Doped Bamboo-Like Carbon Nanofibers as Bifunctional Catalysts for Oxygen Reduction/Evolution Reactions in a Wide pH Range
  37. New insight into pyrrolic-N site effect towards the first NIR window absorption of pyrrolic-N-rich carbon dots
  38. Recent Advances in the Fabrication and Functionalization of Nanostructured Carbon Spheres for Energy Storage Applications
  39. Improvement of electrochemical stability of NCM cathode materials recycled via organic acid leaching and Mn addition
  40. Effect of polyvinylpyrrolidone (PVP) on electrochemical performance of iron pyrite (FeS2) nanoparticle via hot-injection method
  41. Preliminary study of ultrasonication effect on the electrical properties of electrochemically exfoliated graphite
  42. Novel strategy for high-performance supercapacitors through the polyvinylpyrrolidone (PVP)-assisted in situ growth of FeS2
  43. Effect of Nickel on the Hydroxide Ion Adsorption of Copper Sulfide: A viewpoint from a first-principle calculation
  44. Rational design and recent advancements of addictives engineering in ASnI3 tin-based perovskite solar cells: insights from experiments and computational
  45. Improving the Structural Ordering and Particle-Size Homogeneity of Li-Rich Layered Li1.2Ni0.13Co0.13Mn0.54O2 Cathode Materials through Microwave Irradiation Solid-State Synthesis
  46. Truncated Octahedral Shape of Spinel LiNi0.5Mn1.5O4 via a Solid-State Method for Li-Ion Batteries
  47. Structural Modulation of Exfoliated Graphene via a Facile Postultrasonication Treatment toward Enhanced Electrochemical Properties of Supercapacitor Electrode
  48. A Free‐Standing Polyaniline/Silicon Nanowire Forest as the Anode for Lithium‐ion Batteries
  49. Multiple ZnO Core Nanoparticles Embedded in TiO2 Nanoparticles as Agents for Acid Resistance and UV Protection
  50. Covalently Bonded Ball-Milled Silicon/CNT Nanocomposite as Lithium-Ion Battery Anode Material
  51. Electrolyte-dependent Specific Capacitance and Charge Transfer Properties of Exfoliated Graphene as an Electrode of Supercapacitor
  52. NCM cathode active materials reproduced from end-of-life Li-ion batteries using a simple and green hydrometallurgical recycling process
  53. Evolutions of the optical properties in green-emitting MAPbBr3 perovskite nanoplatelets/polymethyl methacrylate (PMMA) composite films for light-emitting diode applications
  54. Rietveld study on the effect of pelletizing and sintering towards the structural evolution of Li1.3Al0.3Ti1.7(PO4)3
  55. Surface Functional Groups Effect on the Absorption Spectrum of Carbon Dots: Initial TD-DFT Study
  56. Coke-Resistant Ni/CeZrO2 Catalysts for Dry Reforming of Methane to Produce Hydrogen-Rich Syngas
  57. Effect of post-treatment drying processes on the optical and photothermal properties of carbon nanodots derived via microwave-assisted method
  58. Fabrication and structure optimization of expanded polystyrene (EPS) waste fiber for high-performance air filtration
  59. Toward Stable High-Performance Tin Halide Perovskite: First-Principles Insights into the Incorporation of Bivalent Dopants
  60. A Sustainable Approach for Preparing Porous Carbon Spheres Derived from Kraft Lignin and Sodium Hydroxide as Highly Packed Thin Film Electrode Materials
  61. Stable layered-layered-spinel structure of the Li1.2Ni0.13Co0.13Mn0.54O2 cathode synthesized by ball-milling assisted solid-state method
  62. Insights into the intermolecular interactions and temperature-concentration dependence of transport in ionic liquid-based EMI–TFSI/LiTFSI electrolytes
  63. The degradation of Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 during cycling studied by electrochemical impedance spectroscopy
  64. Transition metals recovery from organic acid leachate of spent lithium-ion battery cathode via oxalic acid co-precipitation
  65. Machine learning-driven advanced development of carbon-based luminescent nanomaterials
  66. Revealing the synergetic interaction between amino and carbonyl functional groups and their effect on the electronic and optical properties of carbon dots
  67. A rational design of carbon dots via the combination of nitrogen and oxygen functional groups towards the first NIR window absorption
  68. Correction: Solid-state nitrogen-doped carbon nanoparticles with tunable emission prepared by a microwave-assisted method
  69. Development of 2-D Numerical Model for P-N Junction Betavoltaic and Leakage Current Evaluation in Planar Si/Ni-63 Device Configuration
  70. Vertically Aligned n-Type Silicon Nanowire Array as a Free-Standing Anode for Lithium-Ion Batteries
  71. Synergetic effect of the surface ligand and SiO2 driven photoluminescence stabilization of the CH3NH3PbBr3 perovskite magic-sized clusters
  72. Role of Intrinsic Points Defects on the Electronic Structure of Metal–Insulator Transition h-FeS
  73. Versatilely tuned vertical silicon nanowire arrays by cryogenic reactive ion etching as a lithium-ion battery anode
  74. The Influence of Surface Charge on the Antiviral Effect of Curcumin Loaded in Nanocarrier System
  75. Facile Fabrication of Polyelectrolyte Complex Nanoparticles Based on Chitosan – Poly-2-Acrylamido-2-Methylpropane Sulfonic Acid as a Potential Drug Carrier Material
  76. Sustainable porous hollow carbon spheres with high specific surface area derived from Kraft lignin
  77. PEO/PVA/LiOH Solid Polymer Electrolyte Prepared via Ultrasound-assisted Solution Cast Method
  78. Electrical Properties of Electrochemically Exfoliated Graphite with Copper Addition
  79. Silica addition effect on optical properties of halide perovskite-PMMA composite film
  80. The effect of voltage bias on the yield and electrical properties of Exfoliated Graphene synthesized via electrochemical method
  81. Carbon-Based Quantum Dots for Supercapacitors: Recent Advances and Future Challenges
  82. Solid-state nitrogen-doped carbon nanoparticles with tunable emission prepared by a microwave-assisted method
  83. Advances of the top-down synthesis approach for high-performance silicon anodes in Li-ion batteries
  84. Recent advances and rational design strategies of carbon dots towards highly efficient solar evaporation
  85. Effect of H2SO4/H2O2 pre-treatment on electrochemical properties of exfoliated graphite prepared by an electro-exfoliation method
  86. Rapid growth of the CH3NH3PbCl3 single crystal by microwave irradiation
  87. Green recycle processing of cathode active material from LiNi1/3Co1/3Mn1/3O2 (NCM 111) battery waste through citric acid leaching and oxalate co-precipitation process
  88. Preliminary study of electrochemical properties of polyethylene oxide (PEO) and polyvinyl alcohol (PVA) composites as material for solid polymer electrolyte
  89. Photoluminescence stability of CH3NH3PbBr3 perovskite nanoparticles by adding SiO2: Preliminary study
  90. Regeneration of LiNi1/3Co1/3Mn1/3O2Cathode Active Materials from End-of-Life Lithium-Ion Batteries through Ascorbic Acid Leaching and Oxalic Acid Coprecipitation Processes
  91. Electrochemically Exfoliated Graphite/Cu/Cu2O Composites and Their Photocatalytic Activity
  92. Catalytic oxidation of benzene at low temperature over novel combination of metal oxide based catalysts: CuO, MnO2, NiO with Ce0.75Zr0.25O2 as support
  93. Hexagonal Hollow Silica Plate Particles and Polymer Nanocomposite Films with Low Refractive Index
  94. On-demand tuning of charge accumulation and carrier mobility in quantum dot solids for electron transport and energy storage devices
  95. Atomic and molecular adsorption on single platinum atom at the graphene edge: A density functional theory study
  96. Improving the crystallinity and purity of monodisperse Ag fine particles
  97. A superhydrophilic bilayer structure of a nylon 6 nanofiber/cellulose membrane and its characterization as potential water filtration media
  98. Facile deposition of reduced graphene oxide-based transparent conductive film with microwave assisted method
  99. Synthesis of Exfoliated Graphene as Anode Material using a Modified Electrochemical Process
  100. Controlled morphology of electrospun nanofibers from waste expanded polystyrene for aerosol filtration
  101. Synthesis of LiNi0.85Co0.14Al0.01O2 Cathode Material and its Performance in an NCA/Graphite Full-Battery
  102. Development of faujasite-type zeolite and iron oxide as mixed catalyst for aquathermolysis reaction of heavy oil
  103. Electrochemical properties of TiOx/rGO composite as an electrode for supercapacitors
  104. Simultaneous ultraviolet and first near-infrared window absorption of luminescent carbon dots/PVA composite film
  105. The synthesis of nanofiber membranes from acrylonitrile butadiene styrene (ABS) waste using electrospinning for use as air filtration media
  106. Using a smartphone’s magnetic sensor in a low-cost experiment to study the magnetic field due to Helmholtz and anti-Helmholtz coil
  107. In situ functionalization of gadolinium oxide nanoparticles with polyethylene glycol (PEG) by pulsed laser ablation in a liquid medium (PLAL)
  108. Physicochemical study of multicolor BCNO phosphors using a urea combustion method
  109. Electrochemical impedance analysis of polyvinylpyrrolidone-coated sulfur/reduced graphene oxide (S/rGO) electrode
  110. The enhancement on thermoluminescence response of rare earth metal-doped CaSO4/CaF2-based thermoluminescence dosimetry driven by polytetrafluoroethylene decomposition
  111. Sintering time optimization on red photoluminescence properties of manganese-doped boron carbon oxynitride (BCNO:Mn) phosphor
  112. Design of Pyrrolic-N-Rich Carbon Dots with Absorption in the First Near-Infrared Window for Photothermal Therapy
  113. The effect of addition of PTFE or urea on luminescence response of copper-doped lithium tetraborate
  114. Air filtration media from electrospun waste high-impact polystyrene fiber membrane
  115. Simple preparation of Fenton catalyst@bacterial cellulose for waste water treatment
  116. Recovery and Recycling of Tungsten by Alkaline Leaching of Scrap and Charged Amino Group Assisted Precipitation
  117. The influence of copper addition on the electrical conductivity and charge transfer resistance of reduced graphene oxide (rGO)
  118. Measurement of 3-axis magnetic fields induced by current wires using a smartphone in magnetostatics experiments
  119. Natural Rubber Nanocomposite with Human-Tissue-Like Mechanical Characteristic
  120. PTFE Additive and Re-annealing Effect on Thermoluminescence Response of CaSO4:Dy Derived from Co-precipitation Method
  121. Preliminary Studies of Thermoluminescence Dosimeter (TLD) CaSO4:Dy Synthesis
  122. Microwave Synthesis of BCNO/SiO2 Nanocomposite Material
  123. 2nd Materials Research Society of Indonesia Meeting (MRS-Id 2016)
  124. Surface Plasmon Enhanced Nitrogen‐Doped Graphene Quantum Dot Emission by Single Bismuth Telluride Nanoplates
  125. Highly conductive nano-sized Magnéli phases titanium oxide (TiOx)
  126. A modified Marcano method for improving electrical properties of reduced graphene oxide (rGO)
  127. Fabrication of Electrospun Nanofiber from Waste Expanded Polystyrene for Aerosol Filtration Application
  128. Effect of temperature and precursor concentration on the morphology of Cu/γ-Al2O3 prepared via urea combustion method
  129. Composited reduced graphene oxide into LiFePO4/Li2SiO3and its electrochemical impedance spectroscopy properties
  130. Facile and Efficient Removal of Tungsten Anions Using Lysine-Promoted Precipitation for Recycling High-Purity Tungsten
  131. Preliminary Study of the Effect Microwave-Heating on the Morphology and Surface Area of NaX Zeolite
  132. Functionalized carbon nanotube (CNT) membrane: progress and challenges
  133. Natural Rubber Nanocomposite as Human-Tissue-Mimicking Materials for Replacement Cadaver in Medical Surgical Practice
  134. A red emitting of manganese-doped boron carbon oxynitride (BCNO) phosphor materials: facile approach and photoluminescence properties
  135. Microwave-assisted reduction method under nitrogen atmosphere for synthesis and electrical conductivity improvement of reduced graphene oxide (rGO)
  136. Utilisation of the magnetic sensor in a smartphone for facile magnetostatics experiment: magnetic field due to electrical current in straight and loop wires
  137. Heat-treated Escherichia coli as a high-capacity biosorbent for tungsten anions
  138. Initial Study on Thin Film Preparation of Carbon Nanodots Composites as Luminescence Material
  139. Predicting jet radius in electrospinning by superpositioning exponential functions
  140. Preliminary Study of Heat Supply during Carbon Nanodots Synthesis by Microwave-assisted Method
  141. Preliminary Study on Synthesis of Organolead Halide with Lead Derived from Solder Wire
  142. Preparation of Copper Iodide (CuI) Thin Film by In-Situ Spraying and Its Properties
  143. Synthesis of LiFePO4/Li2SiO3/reduced Graphene Oxide (rGO) Composite via Hydrothermal Method
  144. A simple straightforward thermal decomposition synthesis of PEG-covered Gd 2 O 3 (Gd 2 O 3 @PEG) nanoparticles
  145. Tailored synthesis of macroporous Pt/WO3 photocatalyst with nanoaggregates via flame assisted spray pyrolysis
  146. Selective Biosorption and Recovery of Tungsten from an Urban Mine and Feasibility Evaluation
  147. Role of C–N Configurations in the Photoluminescence of Graphene Quantum Dots Synthesized by a Hydrothermal Route
  148. Viscosity Reduction of Heavy Oil Using Nanocatalyst in Aquathermolysis Reaction
  149. Effect of precursor concentration on the electrical properties of LiFePO4 prepared by solvothermal method
  150. Kinetics of nitrogen-doped carbon dot formation via hydrothermal synthesis
  151. Synthesis of gadolinium carbonate-conjugated-poly(ethylene)glycol (Gd2(CO3)3@PEG) particles via a modified solvothermal method
  152. The influence of reduced graphene oxide on electrical conductivity of LiFePO4-based composite as cathode material
  153. Microwave synthesis of homogeneous and highly luminescent BCNO nanoparticles for the light emitting polymer materials
  154. Absorbance Studies of Perovskite CH3NH3PbI(3-x)Clx as Light Harvester in Solar Cell
  155. A System for Characterizing Batteries and their Charging-Discharging Properties
  156. Synthesis of Fe3O4 Nanoparticles Using the Co-Precipitation Method and its Development into Nanofluids as a Catalyst in Aquathermolysis Reactions
  157. First Principle Calculation of Li2Fe0.5Cr0.5SiO4 for Li-Ion Battery Cathode
  158. Graphene Nickel facile reduction
  159. Effects of calcinations temperature and precursor concentration on crystallinity of NiO nanocrystalline powder synthesized via Ethylene Glycol route
  160. Photoluminescence optimization of BCNO phosphors synthesized using citric acid as a carbon source
  161. Synthesis and photoluminescence of BCNO/SiO2 nanocomposite phosphor materials
  162. Synthesis of composite WO3/TiO2 nanoparticles by flame-assisted spray pyrolysis and their photocatalytic activity
  163. Microwave-Assisted Solid State Synthesis of Red-Emitting BCNO Phosphor and its Characteristics
  164. Synthesis of Fe<sub>2</sub>O<sub>3</sub>/C Nanocomposite Using Microwave Assisted Calcination Method
  165. Direct white light emission from a rare-earth-free aluminium–boron–carbon–oxynitride phosphor
  166. Transient nature of graphene quantum dot formation via a hydrothermal reaction
  167. Fluorescent of C-dot composite thin films and its properties
  168. Fe3O4/Zeolite nanocomposites synthesized by microwave assisted coprecipitation and its performance in reducing viscosity of heavy oil
  169. Simulation of electron-matter interaction during wet-STEM electron tomography
  170. Controllable crystallite and particle sizes of WO3 particles prepared by a spray‐pyrolysis method and their photocatalytic activity
  171. Solvothermal synthesis of lithium iron phosphate from a high concentration precursor
  172. Synthesis of spherical macroporous WO3 particles and their high photocatalytic performance
  173. Ethylene Glycol Route Synthesis of Nickel Oxide Nanoparticles as a Catalyst in Aquathermolysis
  174. Preliminary study of natural zeolite as catalyst for decreasing the viscosity of heavy oil
  175. Fabrication of BCNO-composite thin film phosphors and controlling its thickness
  176. Preparation of Polyacrylonitrile Nanofibers with Controlled Morphology Using a Constant-Current Electrospinning System for Filter Applications
  177. Syntheses of Hematite (α-Fe<sub>2</sub>O<sub>3</sub>) Nanoparticles Using Microwave-Assisted Calcination Method
  178. Synthesis of Ni<sub>x</sub>Fe<sub>3-x</sub>O<sub>4</sub> Nanoparticles by Microwave-Assisted Coprecipitation and their Application in Viscosity Reduction of Heavy Oil
  179. Ion-induced nucleation rate measurement in SO2/H2O/N2 gas mixture by soft X-ray ionization at various pressures and temperatures
  180. Preface: The 2nd International Conference on Theoretical and Applied Physics (ICTAP-2012)
  181. Syntheses and Characterizations of Supercapacitors Using Nano-Sized ZnO/Nanoporous Carbon Electrodes and PVA-Based Polymer-Hydrogel Electrolytes
  182. Towards Better Phosphor Design: Effect of SiO2Nanoparticles on Photoluminescence Enhancement of YAG:Ce
  183. Analysis of electron leakage current in MOS capacitors by using anisotropic and isotropic mass approaches
  184. Direct synthesis of spherical YAG:Ce phosphor from precursor solution containing polymer and urea
  185. Numerical Simulation of Tunneling Current in an Anisotropic Metal-Oxide-Semiconductor Capacitor
  186. Numerical Simulation of Tunneling Current in an Anisotropic Metal-Oxide-Semiconductor Capacitor
  187. Influence of Polymer Decomposition Temperature on the Formation of Rare-Earth Free Boron Carbon Oxynitride Phosphors
  188. Modeling of electron transmittance and tunneling current through an interfacial oxide-high-k-gate-stack by including transverse-longitudinal kinetic energy coupling and anisotropic masses: Effects of metal work function
  189. Perpendicular easy axis alignment of FePt nanoparticles on a platinum-(001) buffer layer for high-density magnetic recording
  190. Measuring the effective density, porosity, and refractive index of carbonaceous particles by tandem aerosol techniques
  191. Highly luminescent silica-coated ZnO nanoparticles dispersed in an aqueous medium
  192. Synthesis of uniformly porous NiO/ZrO2 particles
  193. Highly ordered porous monolayer generation by dual-speed spin-coating with colloidal templates
  194. Novel rare-earth-free tunable-color-emitting BCNO phosphors
  195. Preface: The 4[sup th] Nanoscience and Nanotechnology Symposium (NNS2011)
  196. Resistors Network Model of Bcc Cell for Investigating Thermal Conductivity of Nanofluids
  197. Analysis of Mechanical Properties of Single-Wall Carbon Nanotube by Using Finite Element Method
  198. Effect of Silica Nanoparticles on the Photoluminescence Properties of BCNO Phosphor
  199. Optimization of Coating Temperature of TiO[sub 2] Nanoparticles on the Polypropylene Copolymer Surface for Photodegradation of Methylene Blue
  200. Effect of Silica Nanoparticles on Compressive Strength of Leaves-Waste Composite
  201. Morphology Controlled Electrospun Nanofibers for Humidity Sensor Application
  202. Electron Tunnel Current through HfO[sub 2]∕SiO[sub 2] Nanometer-thick Layers with a Trapped Charge: Effects of Electron Incident Angle and Silicon Substrate Orientation
  203. An Analysis of Electron Direct Tunneling Current through a High-K MOS Capacitor by Including the Effect of a Trap between HfO[sub 2] and SiO[sub 2] Interfaces
  204. Simulation of Electron Tunnel Current through HfO[sub 2]∕SiO[sub 2] Nanometer-thick Layers with a Trapped Charge of a MOS Capacitor Using a Transfer-Matrix Method
  205. Quantum Size Effect Simulation on the Electronic Characteristic of Silicon Based Single Electron Transistor
  206. Simulation of Leakage Current in Si∕Ge∕Si Quantum Dot Floating Gate MOSFET Using High-K Material as Tunnel Oxide
  207. Molecular Dynamics Simulation of Smaller Granular Particles Deposition on a Larger One Due to Velocity Sequence Dependent Electrical Charge Distribution
  208. Fabrication of Controllable Pore and Particle Size of Mesoporous Silica Nanoparticles via a Liquid-phase Synthesis Method and Its Absorption Characteristics
  209. Enhanced photoluminescence of ZnO–SiO2 nanocomposite particles and the analyses of structure and composition
  210. Suggesting a derivative of isoindol-1-one from a Vitex species
  211. Morphology optimization of polymer nanofiber for applications in aerosol particle filtration
  212. Experimental evaluation of the pressure and temperature dependence of ion-induced nucleation
  213. Formation of Highly Ordered Nanostructures by Drying Micrometer Colloidal Droplets
  214. Nanometer to Submicrometer Magnesium Fluoride Particles with Controllable Morphology
  215. Controlled synthesis of carbon-based alumina nanophosphors with tunable blue-green luminescence
  216. Particle dynamics simulation of nanoparticle formation in a flame reactor using a polydispersed submicron-sized solid precursor
  217. Nanoparticle formation in spray pyrolysis under low-pressure conditions
  218. Indium Tin Oxide Nanofiber Film Electrode for High Performance Dye Sensitized Solar Cells
  219. A Nanoporous Carbon∕Exfoliated Graphite Composite For Supercapacitor Electrodes
  220. Characterization of silica-coated silver nanoparticles prepared by a reverse micelle and hydrolysis–condensation process
  221. Design of a highly ordered and uniform porous structure with multisized pores in film and particle forms using a template-driven self-assembly technique
  222. Effect of the Carbon Source on the Luminescence Properties of Boron Carbon Oxynitride Phosphor Particles
  223. Intense UV-light absorption of ZnO nanoparticles prepared using a pulse combustion-spray pyrolysis method
  224. Morphology and Particle Size Distribution Controls of Droplet-to-Macroporous/Hollow Particles Formation in Spray Drying Process of Colloidal Mixtures Precursor
  225. A Role of Template Surface Charge in the Preparation of Porous and Hollow Particles Using Spray-drying
  226. Chemical and photoluminescence analyses of new carbon-based boron oxynitride phosphors
  227. Effect of X-ray energy and ionization time on the charging performance and nanoparticle formation of a soft X-ray photoionization charger
  228. Macroporous anatase titania particle: Aerosol self-assembly fabrication with photocatalytic performance
  229. Highly Luminous Hollow Chloroapatite Phosphors Formed by a Template-Free Aerosol Route for Solid-State Lighting
  230. Scaling law on particle-to-fiber formation during electrospinning
  231. Facile Method for the Fabrication of Vertically Aligned ITO Nanopillars with Excellent Properties
  232. Rapid synthesis of a BN/CNT composite particle via spray routes using ferrocene/ethanol as a catalyst/carbon source
  233. Dispersion Stability Enhancement of Titania Nanoparticles in Organic Solvent Using a Bead Mill Process
  234. Morphology-controlled synthesis of chromia–titania nanofibers via electrospinning followed by annealing
  235. Nanoparticle processing for optical applications – A review
  236. Sintering behavior of spherical aggregated nanoparticles prepared by spraying colloidal precursor in a heated flow
  237. A New Physical Route to Produce Monodispersed Microsphere Nanoparticle−Polymer Composites
  238. Production of morphology-controllable porous hyaluronic acid particles using a spray-drying method
  239. Nanoparticle formation through solid-fed flame synthesis: Experiment and modeling
  240. Analysis of fluid permeation through a particle-packed layer using an electric resistance network as an analogy
  241. Synthesis of spherical mesoporous silica nanoparticles with nanometer-size controllable pores and outer diameters
  242. Photoluminescence Characteristics of Macroporous Eu-Doped Yttrium Oxide Particles Prepared by Spray Pyrolysis
  243. Photoluminescent and crystalline properties of Y3−xAl5O12:Cex3+ phosphor nanofibers prepared by electrospinning
  244. Direct synthesis of hBN/MWCNT composite particles using spray pyrolysis
  245. Direct synthesis of highly crystalline transparent conducting oxide nanoparticles by low pressure spray pyrolysis
  246. High performance electrospinning system for fabricating highly uniform polymer nanofibers
  247. Measurement of the Effective Density of Both Spherical Aggregated and Ordered Porous Aerosol Particles Using Mobility- and Mass-Analyzers
  248. Characterization of silica-coated Ag nanoparticles synthesized using a water-soluble nanoparticle micelle
  249. Fabrication and Characterization of a Yellow-Emitting BCNO Phosphor for White Light-Emitting Diodes
  250. Prepazation of Ni/BaTiO3 Core-shell Particle by Spray Drying Process
  251. Synthesis of nanocrystalline GaN from Ga2O3 nanoparticles derived from salt-assisted spray pyrolysis
  252. Nanosized Polymer Particle-facilitated Preparation of Mesoporous Silica Particles Using a Spray Method
  253. Multilayer film deposition of Ag and SiO2 nanoparticles using a spin coating process
  254. Rapid Synthesis of Non‐Aggregated Fine Chloroapatite Blue Phosphor Powders with High Quantum Efficiency
  255. Photoluminescence Properties of Submicrometer Phosphors with Different Crystallite/Particle Sizes
  256. A constant-current electrospinning system for production of high quality nanofibers
  257. Facile Synthesis of New Full‐Color‐Emitting BCNO Phosphors with High Quantum Efficiency
  258. Role of urea addition in the preparation of tetragonal BaTiO3 nanoparticles using flame-assisted spray pyrolysis
  259. Patterned indium tin oxide nanofiber films and their electrical and optical performance
  260. Single crystal ZnO:Al nanoparticles directly synthesized using low-pressure spray pyrolysis
  261. Beads Mill-Assisted Synthesis of Poly Methyl Methacrylate (PMMA)-TiO2 Nanoparticle Composites
  262. High performance of GaN thin films grown on sapphire substrates coated with a silica-submicron-sphere monolayer film
  263. Optical and electrical properties of indium tin oxide nanofibers prepared by electrospinning
  264. Preparation and characterization of nanopigment‐poly(styrene‐co‐n‐butyl acrylate‐co‐methacrylic acid) composite particles by high speed homogenization‐assisted suspension polymerization
  265. Heating Profile Effect on Morphology, Crystallinity, and Photoluminescent Properties of Y2O3:Eu3+Phosphor Nanofibers Prepared Using an Electrospinning Method
  266. Nanoparticle filtration by electrospun polymer fibers
  267. Simulation and experimental study of spray pyrolysis of polydispersed droplets
  268. Monolayer deposition of L10 FePt nanoparticles via electrospray route
  269. Enhanced Photocatalytic Performance of Brookite TiO2 Macroporous Particles Prepared by Spray Drying with Colloidal Templating
  270. Production of Narrow‐Size‐Distribution Polymer‐Pigment‐Nanoparticle Composites via Electrohydrodynamic Atomization
  271. Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method
  272. Control of Particle Morphology from Porous to Hollow by Spray-Drying with a Two-Fluid Nozzle and Template Materials
  273. Reaction of Hydrogen Chloride with Hydrated Lime for Flue Gas Cleaning of Incinerators
  274. Technology Innovation in the Nanoparticle Project
  275. Experimental investigation of nanoparticle dispersion by beads milling with centrifugal bead separation
  276. Fabrication of L10 FePtAg nanoparticles and a study of the effect of Ag during the annealing process
  277. Characterization of dip-coated ITO films derived from nanoparticles synthesized by␣low-pressure spray pyrolysis
  278. Semiconductor Nanoparticle-Polymer Composites
  279. Preparation of functional nanostructured particles by spray drying
  280. Simple synthesis of GaN nanoparticles from gallium nitrate and ammonia aqueous solution under a flow of ammonia gas
  281. Fabrication and photoluminescence of highly crystalline GaN and GaN:Mg nanoparticles
  282. High Coercivity of Ordered Macroporous FePt Films Synthesized via Colloidal Templates
  283. Preparation of oxide particles with ordered macropores by colloidal templating and spray pyrolysis
  284. Self-organization kinetics of mesoporous nanostructured particles
  285. Silica Films Containing Ordered Pores Prepared by Dip Coating of Silica Nanoparticles and Polystyrene Beads Colloidal Mixture
  286. Control of the morphology of nanostructured particles prepared by the spray drying of a nanoparticle sol
  287. Optical band gap and ultralow dielectric constant materials prepared by a simple dip coating process
  288. Interaction of Deposited Aerosol Particles with the Alveolar Liquid Layer
  289. Preparation of microencapsulated powders by an aerosol spray method and their optical properties
  290. Single Route for Producing Organized Metallic Domes, Dots, and Pores by Colloidal Templating and Over-Sputtering
  291. Controllability of Pore Size and Porosity on Self-Organized Porous Silica Particles
  292. Stable photoluminescence of zinc oxide quantum dots in silica nanoparticles matrix prepared by the combined sol–gel and spray drying method
  293. In Situ Production of Spherical Silica Particles Containing Self-Organized Mesopores
  294. Fabrication and Characterization of SiO2 Particles Generated by Spray Method for Standards Aerosol.
  295. One-Step Synthesis for Zn2SiO4:Mn Particles 0.3–1.3 µm in Size with Spherical Morphology and Non-Aggregation
  296. An experimental and modeling investigation of particle production by spray pyrolysis using a laminar flow aerosol reactor