All Stories

  1. Experimental investigations on the friction behavior of partially femtosecond laser-textured journal bearing shells
  2. A Printing Strategy for Embedding Conductor Paths into FFF Printed Parts
  3. 3D printing of piezoelectric and bioactive barium titanate-bioactive glass scaffolds for bone tissue engineering
  4. Micro Injection Molding of Drug-Loaded Round Window Niche Implants for an Animal Model Using 3D-Printed Molds
  5. Micro Injection Molding of Drug-Loaded Round Window Niche Implants for an Animal Model using 3D Printed Molds
  6. Influence of PEGDA Molecular Weight and Concentration on the In Vitro Release of the Model Protein BSA–FITC from Photo Crosslinked Systems
  7. 3D printing of aluminum oxide via composite extrusion modeling using a ceramic injection molding feedstock
  8. Influence of Haunch Geometry and Additional Steel Reinforcement on Load Carrying Capacity of Reinforced Concrete Box Culvert
  9. Time-dependent hyper-viscoelastic parameter identification of human articular cartilage and substitute materials
  10. Tribological effects of different scaled chevron-shaped microstructures on the Stribeck curve of parallel contacts under unidirectional friction
  11. Influence of the Volatility of Solvent on the Reproducibility of Droplet Formation in Pharmaceutical Inkjet Printing
  12. A novel approach to fabricate load-bearing Ti6Al4V-Barium titanate piezoelectric bone scaffolds by coupling electron beam melting and field-assisted sintering
  13. How droplets move on laser-structured surfaces: Determination of droplet adhesion forces on nano- and microstructured surfaces
  14. Volumetric mass density measurements of mesenchymal stem cells in suspension using a density meter
  15. 3D printed and stimulus responsive drug delivery systems based on synthetic polyelectrolyte hydrogels manufactured via digital light processing
  16. Correction: 3D printed and stimulus responsive drug delivery systems based on synthetic polyelectrolyte hydrogels manufactured via digital light processing
  17. Mouldability of Additively Manufactured Attachments on Multipoint Tools
  18. Review of Modeling Techniques for Analysis and Assessment of RC Beam–Column Joints Subjected to Seismic Loads
  19. Electrical impedance spectroscopy on capacitively coupled electrodes for cartilaginous cell stimulation
  20. Comparison of Conventional and Robotic Fused Filament Fabrication on Silicone Build Plates
  21. Hyperelastic parameter identification of human articular cartilage and substitute materials
  22. Digital Light Processing of Round Window Niche Implant Prototypes for Implantation Studies
  23. The influence of PEGDA’s molecular weight on its mechanical properties in the context of biomedical applications
  24. Optimization of composite extrusion modeling process parameters for 3D printing of low-alloy steel AISI 8740 using metal injection moulding feedstock
  25. Modeling The Microrelief Structure of Ti6Al4V Titanium Alloy Surface After Exposure to Femtosecond Laser Pulses
  26. 3D printed gelatin/decellularized bone composite scaffolds for bone tissue engineering: Fabrication, characterization and cytocompatibility study
  27. Interactive effects of ZnO nanoparticles and temperature on molecular and cellular stress responses of the blue mussel Mytilus edulis
  28. Thermal, Mechanical and Biocompatibility Analyses of Photochemically Polymerized PEGDA250 for Photopolymerization-Based Manufacturing Processes
  29. Machine learning for the intelligent analysis of 3D printing conditions using environmental sensor data to support quality assurance
  30. Investigation of suitable material and adhesion promoter combinations for fused filament fabrication on flexible silicone build plates
  31. Morphological and mechanical characterisation of three-dimensional gyroid structures fabricated by electron beam melting for the use as a porous biomaterial
  32. Heat accumulation during femtosecond laser treatment at high repetition rate – A morphological, chemical and crystallographic characterization of self-organized structures on Ti6Al4V
  33. Customised micro-electrode array (MEA) test setup featuring a silicone-casted overlay with two chambers for separated cell seedings
  34. In vitro release of chlorhexidine from UV-cured PEGDA drug delivery scaffolds
  35. Micro injection molding of individualised implants using 3D printed molds manufactured via digital light processing
  36. Digital and Decentralized Management of Patient Data in Healthcare Using Blockchain Implementations
  37. Propagation‐Based Phase Contrast Computed Tomography as a Suitable Tool for the Characterization of Spatial 3D Cell Distribution in Biomaterials
  38. A machine learning method for defect detection and visualization in selective laser sintering based on convolutional neural networks
  39. Influence of structure-determining parameters on the mechanical properties and damage behavior of electron beam melted lattice structures under quasi-static and fatigue compression loading
  40. Tunable Pseudo-Piezoelectric Effect in Doped Calcium Titanate for Bone Tissue Engineering
  41. Electrically Conductive and 3D‐Printable Oxidized Alginate‐Gelatin Polypyrrole:PSS Hydrogels for Tissue Engineering
  42. Establishment of a New Device for Electrical Stimulation of Non-Degenerative Cartilage Cells In Vitro
  43. Complex mechanical behavior of human articular cartilage and hydrogels for cartilage repair
  44. A New Method for Modeling the Cyclic Structure of the Surface Microrelief of Titanium Alloy Ti6Al4V After Processing with Femtosecond Pulses
  45. Initial study on removing cellular residues from hydrostatic high-pressure treated allogeneic tissue using ultrasound
  46. PEGDA drug delivery scaffolds prepared with UV curing process
  47. DLP 3D printing of Dexamethasoneincorporated PEGDA-based photopolymers: compressive properties and drug release
  48. Printing of vessels for small functional tissues – a preliminary study
  49. Microstructured ceramic and metallic implant surfaces and their impact on the viscosity of a synovia fluid substitute
  50. Plasma printing - direct local patterning with functional polymer coatings for biosensing and microfluidics applications
  51. Effect of Chemical Solvents on the Wetting Behavior Over Time of Femtosecond Laser Structured Ti6Al4V Surfaces
  52. Polymer-Bioactive Glass Composite Filaments for 3D Scaffold Manufacturing by Fused Deposition Modeling: Fabrication and Characterization
  53. 3D Printing of Piezoelectric Barium Titanate-Hydroxyapatite Scaffolds with Interconnected Porosity for Bone Tissue Engineering
  54. Ring-Shaped Surface Microstructures for Improved Lubrication Performance of Joint Prostheses
  55. Requirements and Design of an Implant for Electrical Stimulation for Bone Regeneration in Animals
  56. Effect of Laser Pulse Overlap and Scanning Line Overlap on Femtosecond Laser-Structured Ti6Al4V Surfaces
  57. Beamless Metal Additive Manufacturing
  58. Bone regeneration of minipig mandibular defect by adipose derived mesenchymal stem cells seeded tri-calcium phosphate- poly(D,L-lactide-co-glycolide) scaffolds
  59. A Novel Hybrid Additive Manufacturing Process for Drug Delivery Systems with Locally Incorporated Drug Depots
  60. Biomaterial‐Induction of a Transplantable Angiosome
  61. Modification of joint prosthesis surfaces by ultrashort pulse laser treatment for improved joint lubrication
  62. Preliminary Study on 3D printing of PEGDA Hydrogels for Frontal Sinus Implants using Digital Light Processing (DLP)
  63. Thermomechanical properties of PEGDA in combination with different photo-curable comonomers
  64. Time-Dependent Anisotropic Wetting Behavior of Deterministic Structures of Different Strut Widths on Ti6Al4V
  65. Micro-Macro Relationship between Microstructure, Porosity, Mechanical Properties, and Build Mode Parameters of a Selective-Electron-Beam-Melted Ti-6Al-4V Alloy
  66. Femtosecond Laser Nano/Micro Textured Ti6Al4V Surfaces—Effect on Wetting and MG-63 Cell Adhesion
  67. Biocompatibility and thermodynamic properties of PEGDA and two of its copolymer
  68. Numerical simulation of the electric field distribution in an electrical stimulation device for scaffolds settled with cartilaginous cells
  69. Bioinorganic Angiogenesis
  70. Novel 3D printing concept for the fabrication of time-controlled drug delivery systems
  71. Inkjet printing for localized coating and functionalization of medical devices
  72. Thermomechanical properties of PEGDA and its co-polymers
  73. Effects of Build Orientation on Surface Morphology and Bone Cell Activity of Additively Manufactured Ti6Al4V Specimens
  74. Influence of the Velocity and the Number of Polishing Passages on the Roughness of Electrolytic Plasma Polished Pipe Inner Surfaces
  75. Silicone-Based Molding Technique for Optical Flow Analysis in Transparent Models of Fluidic Components
  76. Mechanical Properties of Stainless-Steel Structures Fabricated by Composite Extrusion Modelling
  77. Electrolytic Plasma Polishing of Pipe Inner Surfaces
  78. Endocultivation: continuous application of rhBMP-2 via mini-osmotic pumps to induce bone formation at extraskeletal sites
  79. Comparison of Single Ti6Al4V Struts Made Using Selective Laser Melting and Electron Beam Melting Subject to Part Orientation
  80. Extrusion Based Additive Manufacturing of Metal Parts
  81. Functional Laterality of Task-Evoked Activation in Sensorimotor Cortex of Preterm Infants: An Optimized 3 T fMRI Study Employing a Customized Neonatal Head Coil
  82. Diabetes and Breast Cancer Subtypes
  83. Bioprinting of three dimensional tumor models: a preliminary study using a low cost 3D printer
  84. Numerical flow simulation methods and additive manufacturing methods for the development of a flow optimised design of a novel point-of-care diagnostic device
  85. Mechanical and biological effects of infiltration with biopolymers on 3D printed tricalciumphosphate scaffolds
  86. An Investigation of Sintering Parameters on Titanium Powder for Electron Beam Melting Processing Optimization
  87. Additive Fertigung mit Metallspritzguss-Granulaten / Additive manufacturing with metal injection molding granules
  88. Composites of amorphous and nanocrystalline Zr–Cu–Al–Nb bulk materials synthesized by spark plasma sintering
  89. Continuous cellularization of calcium phosphate hybrid scaffolds induced by plasma polymer activation
  90. Printed pressure housings for underwater applications
  91. Experimental studies on 3D printing of barium titanate ceramics for medical applications
  92. Adjusting inkjet printhead parameters to deposit drugs into micro-sized reservoirs
  93. Influence of different test gases in a non-destructive 100% quality control system for medical devices
  94. Flow optimised design of a novel point-of-care diagnostic device for the detection of disease specific biomarkers
  95. Impact of Particle Size of Ceramic Granule Blends on Mechanical Strength and Porosity of 3D Printed Scaffolds
  96. Endocultivation: Histomorphological effects of repetitive rhBMP-2 application into prefabricated hydroxyapatite scaffolds at extraskeletal sites
  97. A concept for scaffold-based tissue engineering in alveolar cleft osteoplasty
  98. Microstructured zirconia surfaces modulate osteogenic marker genes in human primary osteoblasts
  99. Inkjet printing of viable human dental follicle stem cells
  100. Numerical simulation of low-pulsation gerotor pumps for use in the pharmaceutical industry and in biomedicine
  101. Tomographic particle image velocimetry of a water-jet for low volume harvesting of fat tissue for regenerative medicine
  102. Numerical and experimental flow analysis in centifluidic systems for rapid allergy screening tests
  103. Track N. Low Liquid Flows in Medical Technology and Miscellaneous
  104. Analysis of the release kinetics of surface-bound proteins via laser-induced fluorescence
  105. Drug Delivery From Poly(ethylene glycol) Diacrylate Scaffolds Produced by DLC Based Micro-Stereolithography
  106. Cellular Ti6Al4V with carbon nanotube-like structures fabricated by selective electron beam melting
  107. A new Micro-Stereolithography-System based on Diode Laser Curing (DLC)
  108. The Effects of Various Flow Velocities on the Sensitivity of an Enzyme-Linked Immunosorbent Assay in a Fluidic Allergy Diagnostic Device
  109. A Novel Cell Seeding Chamber for Tissue Engineering and Regenerative Medicine
  110. Investigation of powder removal of net-structured titanium parts made from electron beam melting
  111. Fabrication of biodegradable, porous scaffolds using a low-cost 3D printer
  112. Track D
  113. Track R
  114. Track P
  115. Track M
  116. Influence of grain size and grain-size distribution on workability of granules with 3D printing
  117. Erratum to: A review on 3D micro-additive manufacturing technologies
  118. Characterization and evaluation of a PMMA‐based 3D printing process
  119. Simulation of Cell-Laden Flow in a Cell Mixer Using Computational Fluid Dynamics
  120. On the Development of a Test Setup for a Non-Destructive Quality Control of Centifluidic Medical Devices
  121. Comparison of Elisa Sensitivity Relating to Manual and Low-Pressure Loading of the Fluidic Test Device
  122. Infiltration of 3D printed tricalciumphosphate scaffolds with biodegradable polymers and biomolecules for local drug delivery
  123. Machining of Biocompatible Ceramics with Femtosecond Laser Pulses
  124. Machining of Biocompatible Polymers with Shaped Femtosecond Laser Pulses
  125. Improvement of Mechanical Properties of Bone Tissue Engineered Scaffolds through Sintering and Infiltration with Biopolymers
  126. Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions
  127. A review on 3D micro-additive manufacturing technologies
  128. Endocultivation: the influence of delayed vs. simultaneous application of BMP-2 onto individually formed hydroxyapatite matrices for heterotopic bone induction
  129. Cell seeding chamber for bone graft substitutes
  130. Laser induced surface structure on stainless steel influences cell viability
  131. Laser structuring of silica surface improves cell adhesion
  132. Loading method for discrete drug depots on implant surfaces
  133. Material Processing with Femtosecond Laser Pulses for Medical Applications
  134. Additive Manufacturing of Drug Delivery Systems
  135. Material processing with shaped femtosecond laser pulses
  136. Osteoblast Behavior In Vitro in Porous Calcium Phosphate Composite Scaffolds, Surface Activated with a Cell Adhesive Plasma Polymer Layer
  137. Migration Capacity and Viability of Human Primary Osteoblasts in Synthetic Three-dimensional Bone Scaffolds Made of Tricalciumphosphate
  138. In vitro -Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate Scaffolds
  139. Biocompatibility of individually designed scaffolds with human periosteum for use in tissue engineering
  140. Ceramic scaffolds produced by computer‐assisted 3D printing and sintering: Characterization and biocompatibility investigations
  141. Endocultivation: 3D printed customized porous scaffolds for heterotopic bone induction
  142. Different Calcium Phosphate Granules for 3-D Printing of Bone Tissue Engineering Scaffolds
  143. Processing and mechanical properties of a new flexible acrylic stereolithographic resin family for engineering and medical device manufacturing
  144. Validation of a Femoral Critical Size Defect Model for Orthotopic Evaluation of Bone Healing: A Biomechanical, Veterinary and Trauma Surgical Perspective
  145. Non‐toxic flexible photopolymers for medical stereolithography technology
  146. Image-based analysis of the internal microstructure of bone replacement scaffolds fabricated by 3D printing
  147. Bioceramic Granulates for use in 3D Printing: Process Engineering Aspects
  148. Biomaterials as Scaffold for Bone Tissue Engineering
  149. Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
  150. Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing
  151. Opportunities and limitations of the computer aided surgical reconstruction after complex facial burn injuries
  152. Computer aided surgical reconstruction after complex facial burn injuries – opportunities and limitations
  153. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
  154. Novel, biocompatible polyether(meth)acrylate-based formulations for stereolithography – A new flexible material class for three-dimensional applications
  155. Modelling of a microfluidic device with piezoelectric actuators
  156. Rapid Prototyping models for surgical planning with hard and soft tissue representation
  157. FAST GENERATION OF STEREOLITHOGRAPHlC MODELS
  158. Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography