All Stories

  1. Comparison of Levelized Cost of Energy of superconducting direct drive generators for a 10 MW offshore wind turbine

    Article • IEEE Transactions on Applied Superconductivity, January 2018, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  2. Achieving Sensorless Control for the Brushless Doubly Fed Induction Machine

    Article • IEEE Transactions on Energy Conversion, December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  3. Comparison of modular wind turbine generators considering structural aspects

    Article • October 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  4. Energy consumption of electric powertrain architectures: A comparative study

    Article • September 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  5. Potential of Partially Superconducting Generators for Large Direct-Drive Wind Turbines

    Article • IEEE Transactions on Applied Superconductivity, August 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  6. Brushless Doubly-Fed Induction Machines for Wind Turbines: Developments and Research Challenges

    Article • IET Electric Power Applications, July 2017, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  7. Topology Comparison of Superconducting Generators for 10-MW Direct-Drive Wind Turbines: Cost of Energy Based

    Article • IEEE Transactions on Applied Superconductivity, June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  8. Effects of Armature Winding Segmentation With Multiple Converters on the Short Circuit Torque of 10-MW Superconducting Wind Turbine Generators

    Article • IEEE Transactions on Applied Superconductivity, June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  9. Short Circuits of a 10-MW High-Temperature Superconducting Wind Turbine Generator

    Article • IEEE Transactions on Applied Superconductivity, June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  10. FE based multi-objective optimization of a 3.2MW brushless doubly-fed induction machine

    Article • April 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  11. 3D FEM computation of axial flux in a brushless Doubly-fed Induction Machine

    Article • April 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  12. Optimization and comparison of superconducting generator topologies for a 10 MW wind turbine application

    Article • International Journal of Applied Electromagnetics and Mechanics, March 2017, IOS Press

    dr Henk Polinder

  13. Computationally efficient calculation of skew effects in brushless doubly-fed induction machines

    Article • IET Electric Power Applications, March 2017, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder, Xuezhou Wang

  14. Evaluating Harmonic Distortions in Brushless Doubly Fed Induction Machines

    Article • IEEE Transactions on Magnetics, January 2017, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  15. A Review of Methods to Increase the Availability of Wind Turbine Generator Systems

    Article • CPSS Transactions on Power Electronics and Applications, December 2016, China Power Supply Society

    dr Henk Polinder

  16. Modeling and Optimization of Brushless Doubly-Fed Induction Machines Using Computationally Efficient Finite-Element Analysis

    Article • IEEE Transactions on Industry Applications, November 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  17. Brushless Doubly Fed Induction Machines: Magnetic Field Analysis

    Article • IEEE Transactions on Magnetics, November 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  18. Modularity in wind türbine generator systems — Opportunities and challenges

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  19. Comparing the Brushless DFIM to other Generator Systems for Wind Turbine Drive-Trains

    Article • Journal of Physics Conference Series, September 2016, Institute of Physics Publishing

    dr Henk Polinder

  20. A starter/generator unit for aerospace applications-concept to prototype

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  21. Evaluating the cost of energy of a 10 MW direct-drive wind turbine with superconducting generators

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  22. Harmonics study of nested-loop rotors in brushless doubly-fed induction machines

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  23. A finite element post-processing for skew effects in brushless doubly-fed induction machines

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  24. Ripple Field AC Losses in 10-MW Wind Turbine Generators With a MgB2Superconducting Field Winding

    Article • IEEE Transactions on Applied Superconductivity, April 2016, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  25. Saturation in Brushless Doubly-Fed Induction Machines

    Article • January 2016, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  26. Design optimisation of high performance fractional-slot distributed winding PM Synchronous machines for In-wheel application in Electric Vehicles

    Article • January 2016, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  27. Power Density Limits and Design Trends of High-Speed Permanent Magnet Synchronous Machines

    Article • IEEE Transactions on Transportation Electrification, October 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  28. A review of failure mechanisms in wind turbine generator systems

    Article • September 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder, Prof Frede Blaabjerg

  29. Review of analytical methods to extract magnetic parameters of an inductively coupled circuit

    Article • June 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  30. Brushless doubly-fed induction machines: Torque ripple

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  31. Finite element based multi-objective optimization of a brushless Doubly-Fed Induction Machine

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  32. Finite element modeling of brushless doubly-fed induction machine based on magneto-static simulation

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  33. LVRT performance of brushless doubly fed induction machines — A comparison

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  34. Effects of rotor skew on the performance of brushless doubly-fed induction machine

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  35. Computationally efficient 3D FEM rotor eddy-current loss calculation for permanent magnet synchronous machines

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  36. Comparison of 10 MW superconducting generator topologies for direct-drive wind turbines

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  37. Effects of an electromagnetic shield and armature teeth on the short-circuit performance of a direct drive superconducting generator for 10 MW wind turbines

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  38. Electromagnetomechanical Coupled Vibration Analysis of a Direct-Drive Off-Shore Wind Turbine Generator

    Article • Journal of Computational and Nonlinear Dynamics, April 2015, ASME International

    dr Henk Polinder

  39. Design and testing of a high-speed aerospace permanent magnet starter/generator

    Article • March 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  40. In-Situ Experimental Modal Analysis of a Direct-Drive Wind Turbine Generator

    Article • January 2015, Springer Science + Business Media

    dr Henk Polinder

  41. Analysis and neutral voltage based detection of inter-turn faults in high-speed permanent magnet machines with parallel strands

    Article • IEEE Transactions on Industrial Electronics, January 2015, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  42. Model Reduction Methods for Magnetic Fields Based on Modal Analysis

    Article • IEEE Transactions on Magnetics, November 2014, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  43. Influence of PWM switching frequency on the losses in PM machines

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  44. Brushless Doubly-Fed Induction Machines: Magnetic field modelling

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  45. A novel analytical approach and finite element modelling of a BDFIM

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  46. Efficient finite element based rotor loss calculation for permanent magnet synchronous machines

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  47. Experimental determination of stator winding failure behavior

    Article • August 2014, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  48. Small wind power generation using automotive alternator

    Article • Renewable Energy, June 2014, Elsevier

    dr Henk Polinder

  49. Current Sharing Analysis of Parallel Strands in Low-Voltage High-Speed Machines

    Article • IEEE Transactions on Industrial Electronics, June 2014, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  50. Design of an MgB2race track coil for a wind generator pole demonstration

    Article • Journal of Physics Conference Series, May 2014, Institute of Physics Publishing

    dr Henk Polinder

  51. Feasibility study of a superconducting motor for electrical helicopter propulsion

    Article • Journal of Physics Conference Series, May 2014, Institute of Physics Publishing

    dr Henk Polinder

  52. Effects of Magneto-Mechanical Coupling on Structural Modal Parameters

    Article • January 2014, Springer Science + Business Media

    dr Henk Polinder

  53. Comparison between Induction and PM Machine for High Speed Starter-Generator Applications

    Article • January 2014, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  54. Short-circuit faults in high-speed PM machines with parallel strands and coils

    Article • January 2014, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  55. High-Torque-Density High-Efficiency Flux-Switching PM Machine for Aerospace Applications

    Article • IEEE Journal of Emerging and Selected Topics in Power Electronics, December 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  56. Analytical-numerical hybrid model for flux-switching permanent magnet machines

    Article • November 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  57. An Inductive Power Transfer through metal object

    Article • November 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder, Prof. ABDUL-GANIYU A. JIMOH

  58. Trends in Wind Turbine Generator Systems

    Article • IEEE Journal of Emerging and Selected Topics in Power Electronics, September 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  59. Effect of Radial Cooling Ducts on the Electromagnetic Performance of the Permanent Magnet Synchronous Generators With Double Radial Forced Air Cooling for Direct-Driven Wind Turbines

    Article • IEEE Transactions on Magnetics, June 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  60. Machine selection and initial design of an aerospace starter/generator

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  61. Stator winding proximity loss reduction techniques in high speed electrical machines

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  62. Validation of eddy current loss models for permanent magnet machines with fractional-slot concentrated windings

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  63. Influence of Stator Slotting on the Performance of Permanent-Magnet Machines With Concentrated Windings

    Article • IEEE Transactions on Magnetics, February 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  64. Electrical drives for direct drive renewable energy systems

    Article • January 2013, Elsevier

    dr Henk Polinder

  65. Contributor contact details

    Article • January 2013, Elsevier

    dr Henk Polinder

  66. Comparison of Energy Yield of Small Wind Turbines in Low Wind Speed Areas

    Article • IEEE Transactions on Sustainable Energy, January 2013, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  67. Principles of electrical design of permanent magnet generators for direct drive renewable energy systems

    Article • January 2013, Elsevier

    dr Henk Polinder

  68. Direct drive wave energy conversion systems: an introduction

    Article • January 2013, Elsevier

    dr Henk Polinder

  69. Case study of the permanent magnet direct drive generator in the Zephyros wind turbine

    Article • January 2013, Elsevier

    dr Henk Polinder

  70. Case study of the Archimedes Wave Swing (AWS) direct drive wave energy pilot plant

    Article • January 2013, Elsevier

    dr Henk Polinder

  71. Optimization of the Winding Arrangement to Increase the Zero-Sequence Inductance of a Synchronous Machine With Multifunctional Converter Drive

    Article • IEEE Transactions on Industry Applications, November 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  72. Low cost axial flux PM generator for small wind turbines

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  73. Modeling for the design of fractional slot PM machines with concentrated windings protected from demagnetization during three-phase short circuit

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  74. Axial segmentation and magnets losses of SMPM machines using 2D FE method

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  75. Torque enhanced Flux-Switching PM machine for aerospace applications

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  76. Precise calculation and optimization of rotor eddy current losses in high speed permanent magnet machine

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  77. Optimization and comparison of electrical machines using particle swarm optimization

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  78. Eddy current loss calculation in rotor back iron for concentrated winding PM generator

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  79. Philosophical considerations on the design of smart grids

    Article • July 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  80. Planning and Designing Smart Grids: Philosophical Considerations

    Article • IEEE Technology and Society Magazine, January 2012, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  81. Literature survey of eddy-current loss analysis in rotating electrical machines

    Article • IET Electric Power Applications, January 2012, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  82. Structural comparison of permanent magnet direct drive generator topologies for 5MW wind turbines

    Article • January 2012, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  83. Performance of axial flux permanent magnet generator for human power application

    Article • January 2012, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  84. Rotor losses in laminated magnets and an anisotropic carbon fiber sleeve

    Article • January 2012, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  85. Energy yield of small wind turbines in low wind speed areas

    Article • November 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  86. A low conductivity composite rotor for fractional pitch concentrated winding machines

    Article • September 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  87. Electrical generators for maritime application

    Article • August 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  88. Influence of slot/pole number combination on performances of permanent magnet machines with concentrated windings for ship application

    Article • August 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  89. Overview of and trends in wind turbine generator systems

    Article • July 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  90. Direct drive in wave energy conversion — AWS full scale prototype case study

    Article • July 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  91. Energy yield of two generator systems for small wind turbine application

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  92. Inductance calculations for PM machines with concentrated windings

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  93. Composite materials for low loss rotor construction

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  94. Improved model for design of permanent magnet machines with concentrated windings

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  95. Analytical and FE calculation of eddy-current losses in PM concentrated winding machines for wind turbines

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  96. Effect of design parameters on electromagnetic torque of PM machines with concentrated windings using nonlinear dynamic FEM

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  97. Structural mass minimization of large direct-drive wind generators using a buoyant rotor structure

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  98. Structural Flexibility: A Solution for Weight Reduction of Large Direct-Drive Wind-Turbine Generators

    Article • IEEE Transactions on Energy Conversion, September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  99. Comparison of an axial flux and a radial flux permanent magnet motor for solar race cars

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  100. Studying rotor eddy current loss of PM machines using nonlinear FEM including rotor motion

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  101. Realization of the I/f control method for a high-speed permanent magnet motor

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  102. Comparison of analytical and Finite Element calculation of eddy-current losses in PM machines

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  103. Human powered axial flux permanent magnet machines: Review and comparison

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  104. Modular sensorless control of high speed, fault tolerant machines

    Article • June 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  105. Modeling magnetic saturation for the design of exterior rotor permanent magnet machines

    Article • June 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  106. On the Speed Limits of Permanent-Magnet Machines

    Article • IEEE Transactions on Industrial Electronics, January 2010, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  107. Enclosure design for a high-speed permanent magnet rotor

    Article • January 2010, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  108. Ring-shaped transverse flux PM generator for large direct-drive wind turbines

    Article • November 2009, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  109. Motor drive for a novel high-speed micro-milling spindle

    Article • July 2009, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  110. Design challenges and potentials of HTS synchronous motor for Superbus

    Article • May 2009, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  111. Scaling laws for direct drive generators in wind turbines

    Article • May 2009, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  112. Fault tolerant generator systems for wind turbines

    Article • May 2009, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  113. Optimization of Multibrid Permanent-Magnet Wind Generator Systems

    Article • IEEE Transactions on Energy Conversion, March 2009, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  114. A first-order energy storage requirements estimation for an Archimedes Wave Swing Park

    Article • November 2008, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  115. Design of a Lightweight Transverse Flux Permanent Magnet Machine for Direct-Drive Wind Turbines

    Article • October 2008, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  116. Overcoming limits of high-speed PM machines

    Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  117. Comparative design of radial and transverse flux PM generators for direct-drive wind turbines

    Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  118. Promising Direct-Drive Generator System for Large Wind Turbines

    Article • EPE Journal, September 2008, Taylor & Francis

    dr Henk Polinder

  119. A new concept for weight reduction of large direct drive machines

    Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  120. A 50kW integrated fault tolerant permanent magnet machine and motor drive

    Article • June 2008, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  121. Promising Direct-Drive Generator System for Large Wind Turbines

    Article • March 2008, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  122. Structural mass in direct-drive permanent magnet electrical generators

    Article • IET Renewable Power Generation, March 2008, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  123. Investigation of the Coupling Paths of a Galvanically Isolated AC/AC Converter

    Article • July 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  124. Current and Novel Electrical Generator Technology for Wave Energy Converters

    Article • May 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  125. Analytical Modeling of a Permanent-Magnet Synchronous Machine in a Flywheel

    Article • IEEE Transactions on Magnetics, May 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  126. 10 MW Wind Turbine Direct-Drive Generator Design with Pitch or Active Speed Stall Control

    Article • May 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  127. Eddy-Current Losses in the Solid Back-Iron of PM Machines for different Concentrated Fractional Pitch Windings

    Article • May 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  128. Quantum Control for an Experimental Contactless Energy Transfer System for Multiple Users

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  129. Common Mode DC-Bus Filter Design for Variable Speed Drive System via Transfer Ratio Measurements

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  130. Noise propagation path identification of variable speed drive in time domain via common mode test mode

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  131. Design of an Inductive Contactless Power System for Multiple Users

    Article • October 2006, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  132. Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines

    Article • IEEE Transactions on Energy Conversion, September 2006, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  133. Eddy-current losses in the solid back-iron of permanent-magnet machines with concentrated fractional pitch windings

    Article • January 2006, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  134. Basic Operation Principles and Electrical Conversion Systems of Wind Turbines

    Article • EPE Journal, December 2005, Taylor & Francis

    dr Henk Polinder

  135. Reduced-Order Modelling of Wind Turbines

    Article • October 2005, Wiley

    dr Henk Polinder

  136. Wind Power and Voltage Control

    Article • October 2005, Wiley

    dr Henk Polinder

  137. Conventional and TFPM Linear Generators for Direct-Drive Wave Energy Conversion

    Article • IEEE Transactions on Energy Conversion, June 2005, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  138. Wave energy converters and their impact on power systems

    Article • January 2005, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  139. Comparison of direct-drive and geared generator concepts for wind turbines

    Article • January 2005, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  140. Design, modelling and test results of the AWS PM linear generator

    Article • European Transactions on Electrical Power, January 2005, Wiley

    dr Henk Polinder

  141. Mastering high‐density optical disks: a new concept design

    Article • Assembly Automation, December 2004, Emerald

    dr Henk Polinder

  142. Linear PM Generator System for Wave Energy Conversion in the AWS

    Article • IEEE Transactions on Energy Conversion, September 2004, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  143. Representing wind turbine electrical generating systems in fundamental frequency simulations

    Article • IEEE Transactions on Energy Conversion, December 2003, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  144. Contribution of permanent-magnet volume elements to no-load voltage in machines

    Article • IEEE Transactions on Magnetics, May 2003, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  145. Varying magnetization orientation for permanent-magnet volume reduction in machines

    Article • IEEE Transactions on Magnetics, May 2003, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  146. General model for representing variable speed wind turbines in power system dynamics simulations

    Article • IEEE Transactions on Power Systems, February 2003, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  147. General Model for Representing Variable-Speed Wind Turbines in Power System Dynamics Simulations

    Article • IEEE Power Engineering Review, November 2002, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  148. Magnet shaping for minimal magnet volume in machines

    Article • IEEE Transactions on Magnetics, September 2002, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  149. Modelling a linear PM motor including magnetic saturation

    Article • January 2002, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  150. Voltage Control Methods with Grid Connected Wind Turbines: A Tutorial Review

    Article • Wind Engineering, November 2001, SAGE Publications

    dr Henk Polinder

  151. Modeling wind turbines in power system dynamics simulations

    Article • January 2001, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  152. Dynamic modelling of a wind turbine with doubly fed induction generator

    Article • January 2001, Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  153. Modelling a PM machine with shielding cylinder

    Article • January 1999, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  154. Eddy-current losses in the segmented surface-mounted magnets of a PM machine

    Article • IEE Proceedings - Electric Power Applications, January 1999, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  155. Eddy-current losses in the permanent magnets of a PM machine

    Article • January 1997, the Institution of Engineering and Technology (the IET)

    dr Henk Polinder

  156. Initialization of wind turbine models in power system dynamics simulations

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  157. Linear generators for direct-drive wave energy conversion

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  158. Modeling new generation and storage technologies in power system dynamics simulations

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  159. Magnet shaping for minimal magnet volume in machines

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  160. Analytic calculation of the magnetic field in PM machines

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  161. Investigation of EMI noise transfer characteristic of variable speed drive system

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder

  162. Modelling of a linear PM machine including magnetic saturation and end effects: Maximum force to current ratio

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    dr Henk Polinder