All Stories

  1. Effect of isothermal shear flow on morphology evolution of an isotactic polypropylene

    Article • Polymer, February 2024, Elsevier

    Dr Felice De Santis

  2. Trimodal polyethylene polymer design for more sustainable packaging applications

    Article • Polymer, February 2024, Elsevier

    Dr Felice De Santis

  3. Critical insights into ethylene‐1‐alkene copolymers and long‐chain branched polyethylene microstructure on thermo‐rheological and sealing behavior of multicomponent systems

    Article • Polymer Engineering & Science, January 2023, Wiley

    Dr Felice De Santis

  4. Poly(l-lactic acid) nucleation by alkylated carbon black

    Article • Polymer, September 2022, Elsevier

    Dr Felice De Santis

  5. Prediction of the maximum flow length of a thin injection molded part

    Article • Journal of Power Electronics, October 2020, De Gruyter

    Mrs Sara Liparoti, Dr Felice De Santis

  6. Effects of rapid cavity temperature variations on the crystallinity of PLA

    Article • January 2020, American Institute of Physics

    Dr Felice De Santis

  7. Effective de-icing skin using graphene-based flexible heater

    Article • Composites Part B Engineering, April 2019, Elsevier

    Dr Felice De Santis

  8. Innovative design and simulation study of a mould for rapid temperature control in micro-injection moulding

    Article • January 2019, American Institute of Physics

    Dr Felice De Santis

  9. Microinjection molded PLA parts with modulated degradation rates

    Article • January 2019, American Institute of Physics

    Dr Felice De Santis

  10. Thermodynamic properties and crystallization kinetics of isotactic polypropylene under pressure

    Article • January 2019, American Institute of Physics

    Dr Felice De Santis

  11. PLA Melt Stabilization by High-Surface-Area Graphite and Carbon Black

    Article • Polymers, February 2018, MDPI AG

    Dr Felice De Santis

  12. Effect of rapid temperature variations on the resulting orientation and morphology of micro molded parts

    Article • January 2018, American Institute of Physics

    Dr Felice De Santis

  13. Dynamic local temperature control in micro-injection molding: Effects on poly(lactic acid) morphology

    Article • Polymer Engineering & Science, December 2017, Wiley

    Dr Felice De Santis

  14. Effect of mold opening on the properties of PLA samples obtained by foam injection molding

    Article • Polymer Engineering & Science, October 2017, Wiley

    Dr Felice De Santis

  15. Mimicking the contractions of a human stomach and their effect on pharmaceuticals

    Article • Journal of Drug Delivery Science and Technology, October 2017, Elsevier

    Dr Felice De Santis

  16. PLA-Based Nanobiocomposites with Modulated Biodegradation Rate

    Article • July 2017, Springer Science + Business Media

    Dr Felice De Santis

  17. Effect of processing conditions on the cell morphology distribution in foamed injection molded PLA samples

    Article • January 2017, American Institute of Physics

    Dr Felice De Santis

  18. Development of a rapid surface temperature variation system and application to micro-injection molding

    Article • Journal of Materials Processing Technology, November 2016, Elsevier

    Dr Felice De Santis

  19. Analysis of flow induced crystallization through molecular stretch

    Article • Polymer, November 2016, Elsevier

    Dr Felice De Santis

  20. The rheological and crystallization behavior of polyoxymethylene

    Article • Polymer Testing, November 2016, Elsevier

    Dr Felice De Santis

  21. Effects of water sorption on poly(lactic acid)

    Article • Polymer, September 2016, Elsevier

    Dr Felice De Santis

  22. Effect of molding conditions on crystallization kinetics and mechanical properties of poly(lactic acid)

    Article • Polymer Engineering & Science, August 2016, Wiley

    Dr Felice De Santis

  23. Effect of shear flow on spherulitic growth and nucleation rates of polypropylene

    Article • Polymer, May 2016, Elsevier

    Dr Felice De Santis

  24. Antimicrobial azobenzene compounds and their potential use in biomaterials

    Article • January 2016, American Institute of Physics

    Dr Felice De Santis

  25. Melt compounding of poly (Lactic Acid) and talc: assessment of material behavior during processing and resulting crystallization

    Article • Journal of Polymer Research, November 2015, Springer Science + Business Media

    Dr Felice De Santis

  26. Iron Chelates: Production Processes and Reaction Evolution Analysis

    Article • Chemical Engineering Communications, November 2015, Taylor & Francis

    Dr Felice De Santis

  27. A spectroscopic approach to assess transport properties of water vapor in PLA

    Article • Polymer Testing, July 2015, Elsevier

    Dr Felice De Santis

  28. Biodegradable antimicrobial films based on poly(lactic acid) matrices and active azo compounds

    Article • Journal of Applied Polymer Science, May 2015, Wiley

    Dr Felice De Santis

  29. Strain and damage monitoring in carbon-nanotube-based composite under cyclic strain

    Article • Composites Part A Applied Science and Manufacturing, April 2015, Elsevier

    Dr Liberata Guadagno, Dr Felice De Santis

  30. Physical changes of poly(lactic acid) induced by water sorption

    Article • January 2015, American Institute of Physics

    Dr Felice De Santis

  31. Injection molding of iPP samples in controlled conditions and resulting morphology

    Article • January 2015, American Institute of Physics

    Dr Felice De Santis

  32. Modeling morphology evolution during injection molding of thermoplastic polymers

    Article • January 2015, American Institute of Physics

    Dr Felice De Santis

  33. Preface: GT70 Conference

    Article • January 2015, American Institute of Physics

    Dr Felice De Santis

  34. Fibrillar Morphology in Shear-Induced Crystallization of Polypropylene

    Article • Macromolecular Materials and Engineering, August 2014, Wiley

    Dr Felice De Santis

  35. Fibrillar morphology formation in a sheared polypropylene melt

    Article • January 2014, American Institute of Physics

    Dr Felice De Santis

  36. Spherulitic nucleation and growth rates in a sheared polypropylene melt

    Article • January 2014, American Institute of Physics

    Dr Felice De Santis

  37. Modelling morphology evolution during solidification of IPP in processing conditions

    Article • January 2014, American Institute of Physics

    Dr Felice De Santis

  38. Characterization of the Polycaprolactone Melt Crystallization: Complementary Optical Microscopy, DSC, and AFM Studies

    Article • The Scientific World JOURNAL, January 2014, Hindawi Publishing Corporation

    Dr Felice De Santis

  39. Optical Properties of Polypropylene upon Recycling

    Article • The Scientific World JOURNAL, January 2013, Hindawi Publishing Corporation

    Dr Felice De Santis

  40. Nucleation density and growth rate of polypropylene measured by calorimetric experiments

    Article • Journal of Thermal Analysis and Calorimetry, October 2012, Springer Science + Business Media

    Dr Felice De Santis

  41. The influence of dissolution conditions on the drug ADME phenomena

    Article • European Journal of Pharmaceutics and Biopharmaceutics, October 2011, Elsevier

    Gaetano Lamberti, Dr Felice De Santis

  42. Nucleation and crystallization kinetics of poly(lactic acid)

    Article • Thermochimica Acta, August 2011, Elsevier

    Dr Felice De Santis

  43. Crystallization kinetics of virgin and processed poly(lactic acid)

    Article • Polymer Degradation and Stability, July 2010, Elsevier

    Dr Felice De Santis

  44. Analysis of Shrinkage Development of a Semicrystalline Polymer during Injection Molding

    Article • Industrial & Engineering Chemistry Research, March 2010, American Chemical Society (ACS)

    Dr Felice De Santis

  45. Alternatives to Laboratory Animals: In Vitro and In Silico Approaches

    Article • Scientia Pharmaceutica, January 2010, Osterreichische Pharmazeutische Gesellschaft (OPhG)

    Dr Felice De Santis

  46. Synthesis and characterization of P(MMA-AA) copolymers for targeted oral drug delivery

    Article • Polymer Bulletin, January 2009, Springer Science + Business Media

    Gaetano Lamberti, Dr Felice De Santis

  47. As-molded shrinkage on industrial polypropylene injection molded parts: experiments and analysis

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Dr Felice De Santis

  48. Isothermal Nanocalorimetry of Isotactic Polypropylene

    Article • Macromolecules, December 2007, American Chemical Society (ACS)

    Dr Felice De Santis, Prof. Christoph Schick

  49. Heat transfer and crystallization kinetics during fast cooling of thin polymer films

    Article • Heat and Mass Transfer, November 2006, Springer Science + Business Media

    Gaetano Lamberti, Dr Felice De Santis

  50. Scanning Nanocalorimetry at High Cooling Rate of Isotactic Polypropylene

    Article • Macromolecules, April 2006, American Chemical Society (ACS)

    Dr Felice De Santis, Prof. Christoph Schick

  51. Optical In Situ Characterization of Isotactic Polypropylene Crystallization Using an LED Array in Avalanche-Photoreceiver Mode

    Article • IEEE Transactions on Instrumentation and Measurement, February 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Felice De Santis

  52. Morphology Evolution During Polymer Crystallization Simultaneous Calorimetric and Optical Measurements

    Article • Macromolecular Symposia, February 2006, Wiley

    Dr Felice De Santis

  53. Improved experimental characterization of crystallization kinetics

    Article • European Polymer Journal, October 2005, Elsevier

    Gaetano Lamberti, Dr Felice De Santis

  54. Crystallization kinetics of a fluorinated copolymer of tetrafluoroethylene

    Article • European Polymer Journal, September 2004, Elsevier

    Dr Felice De Santis

  55. Modeling the interactions between light and crystallizing polymer during fast cooling

    Article • Applied Physics A, March 2004, Springer Science + Business Media

    Dr Felice De Santis, Gaetano Lamberti

  56. Analysis of gate freeze-off time in injection molding

    Article • Polymer Engineering & Science, January 2004, Wiley

    Dr Felice De Santis

  57. Crystallization during fast cooling experiments, a novel apparatus for real time monitoring

    Article • Macromolecular Symposia, August 2002, Wiley

    Dr Felice De Santis, Gaetano Lamberti

  58. A new method for on-line monitoring of non isothermal crystallization kinetics of polymers

    Article • Polymer Bulletin, April 2002, Springer Science + Business Media

    Dr Felice De Santis, Gaetano Lamberti

  59. In-situ characterization of polymer crystallization using a low-cost light emitting diode array as optical receiver with photogain

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Dr Felice De Santis

  60. Polymer Crystallization Under High Cooling Rate and Pressure: A Step Towards Polymer Processing Conditions

    Article • Springer Science + Business Media

    Dr Felice De Santis