All Stories

  1. Geometrically Similar Rectangular Passive Micromixers and the Scaling Validity on Mixing Efficiency and Pressure Drops

    Article • Strojnícky časopis - Journal of Mechanical Engineering, May 2019, De Gruyter

    Dr Dhananjay Bodas

  2. Applications of cobalt ferrite nanoparticles in biomedical nanotechnology

    Article • Nanomedicine, June 2018, Future Medicine

    Dr Dhananjay Bodas

  3. A facile one-step method for cell lysis and DNA extraction of waterborne pathogens using a microchip

    Article • Biosensors and Bioelectronics, January 2018, Elsevier

    Dr Dhananjay Bodas

  4. Nanoscale silver depositions inhibit microbial colonization and improve biocompatibility of titanium abutments

    Article • Colloids and Surfaces B Biointerfaces, November 2017, Elsevier

    Dr Dhananjay Bodas

  5. use of an acellular cellulose based scaffold for treating osteochondral defects

    Article • International Journal of Nanomedicine, September 2017, Dove Medical Press

    Jyutika Rajwade, Dr Dhananjay Bodas, sachin jadhav

  6. Study of $$\upbeta $$ β -phase development in spin-coated PVDF thick films

    Article • Bulletin of Materials Science, June 2017, Springer Science + Business Media

    Dr Dhananjay Bodas

  7. Magnetically active micromixer assisted synthesis of drug nanocomplexes exhibiting strong bactericidal potential

    Article • Materials Science and Engineering C, November 2016, Elsevier

    Dr Dhananjay Bodas

  8. Radio-frequency triggered heating and drug release using doxorubicin-loaded LSMO nanoparticles for bimodal treatment of breast cancer

    Article • Colloids and Surfaces B Biointerfaces, September 2016, Elsevier

    Dr Dhananjay Bodas

  9. A high affinity phage-displayed peptide as a recognition probe for the detection of Salmonella Typhimurium

    Article • Journal of Biotechnology, August 2016, Elsevier

    Dr Dhananjay Bodas

  10. Chitosan nanoparticles synthesis caught in action using microdroplet reactions

    Article • Scientific Reports, February 2016, Nature

    Dr Dhananjay Bodas

  11. A concave microwell array fabricated using the ommatidium of the common fruit fly for efficient cell culture

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Dr Dhananjay Bodas

  12. Development of a novel smartphone-based application for accurate and sensitive on-field hemoglobin measurement

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Dr Dhananjay Bodas

  13. Synthesis of Monodisperse Chitosan Nanoparticles and in Situ Drug Loading Using Active Microreactor

    Article • ACS Applied Materials & Interfaces, October 2015, American Chemical Society (ACS)

    Dr Dhananjay Bodas

  14. ChemInform Abstract: Lanthanum Strontium Manganese Oxide (LSMO) Nanoparticles: A Versatile Platform for Anticancer Therapy

    Article • ChemInform, August 2015, Wiley

    Dr Dhananjay Bodas

  15. Computational fluid dynamic analysis of poly(dimethyl siloxane) magnetic actuator based micromixer

    Article • Sensors and Actuators B Chemical, June 2015, Elsevier

    Dr Dhananjay Bodas

  16. Benzophenone doped polydimethylsiloxane: self developable composite resist system for its use in a direct write laser lithography application

    Article • Journal of Physics D Applied Physics, March 2015, Institute of Physics Publishing

    Dr Dhananjay Bodas

  17. Design and simulation of microcantilevers for detection of pathogens

    Article • March 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Dhananjay Bodas

  18. Design and simulation of blocked blood vessel for early detection of heart diseases

    Article • March 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Dhananjay Bodas

  19. Room temperature magnetism and metal to semiconducting transition in dilute Fe doped Sb1−xSexsemiconducting alloy thin films

    Article • Materials Research Express, February 2015, Institute of Physics Publishing

    Dr Dhananjay Bodas

  20. Lanthanum strontium manganese oxide (LSMO) nanoparticles: a versatile platform for anticancer therapy

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Dr Dhananjay Bodas

  21. Surface studies on benzophenone doped PDMS microstructures fabricated using KrF excimer laser direct write lithography

    Article • Applied Surface Science, September 2014, Elsevier

    Dr Dhananjay Bodas

  22. Development of immunosensor using magnetic nanoparticles and circular microchannels in PDMS

    Article • Microelectronic Engineering, March 2014, Elsevier

    Dr Dhananjay Bodas

  23. Cost-Effective Processing of Polymers and Application to Devices

    Article • January 2014, Springer Science + Business Media

    Dr Dhananjay Bodas

  24. Inducing multiple functionalities in ZnS nanoparticles by doping Ni+2 ions

    Article • Materials Research Bulletin, June 2013, Elsevier

    Dr Hemant P Soni, Dr Dhananjay Bodas

  25. Low cost fabrication and testing of high isolation RF MEMS switches

    Article • March 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Dhananjay Bodas

  26. Optimization of RF sputtered PZT thin films for MEMS cantilever application

    Article • March 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Dhananjay Bodas

  27. Relative humidity sensor using plasma polymerized methyl methacrylate (PPMMA)

    Article • March 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Dhananjay Bodas

  28. Magnetically controlled flexible valve for flow manipulation in polymer microfluidic devices

    Article • March 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Dhananjay Bodas

  29. Multiplexed Detection of Waterborne Pathogens in Circular Microfluidics

    Article • Applied Biochemistry and Biotechnology, February 2012, Springer Science + Business Media

    Dr Dhananjay Bodas

  30. In situ synthesis of Au nanoparticles in 3D circular microchannels in PDMS using a simple and reliable molding method

    Article • Microelectronic Engineering, February 2012, Elsevier

    Dr Dhananjay Bodas

  31. Deposition and characterization of low temperature silicon nitride films deposited by inductively coupled plasma CVD

    Article • Applied Surface Science, March 2011, Elsevier

    Dr Dhananjay Bodas

  32. Quantum dot based immunosensor using 3D circular microchannels fabricated in PDMS

    Article • Biosensors and Bioelectronics, February 2011, Elsevier

    Dr Dhananjay Bodas

  33. Development of PVdF based pressure sensor for low pressure application

    Article • February 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Dhananjay Bodas

  34. Development and Analytical Treatment of 3-D Passive Mixromixer for Enhanced Microfluidics Reactions

    Article • January 2011, ASME International

    Dr Dhananjay Bodas

  35. Creation of a stable hydrophilic poly(dimethyl siloxane) surface by the plasma-induced crosslinking of monomers

    Article • Journal of Applied Polymer Science, November 2010, Wiley

    Dr Dhananjay Bodas

  36. Structural, magnetic and optical studies of (Zn0.90Co0.05Ni0.05O) DMS

    Article • Materials Letters, October 2010, Elsevier

    Dr Dhananjay Bodas

  37. Simulations of piezoelectric pressure sensor for radial artery pulse measurement

    Article • Materials Science and Engineering B, April 2010, Elsevier

    Dr Dhananjay Bodas

  38. Study of electrical and optical properties of Mn doped ZnS clusters

    Article • Materials Letters, December 2009, Elsevier

    Dr Hemant P Soni, Dr Dhananjay Bodas

  39. Electrical and optical characteristics of Ni doped ZnS clusters

    Article • Materials Letters, April 2009, Elsevier

    Dr Hemant P Soni, Dr Dhananjay Bodas

  40. Surface modification and aging studies of addition-curing silicone rubbers by oxygen plasma

    Article • European Polymer Journal, July 2008, Elsevier

    Dr Dhananjay Bodas

  41. Formation of ZnS nanorods entrapped in polyacrylic acid (PAA) film

    Article • Materials Letters, June 2008, Elsevier

    Dr Hemant P Soni, Dr Dhananjay Bodas

  42. Direct patterning of quantum dots on structured PDMS surface

    Article • Sensors and Actuators B Chemical, December 2007, Elsevier

    Dr Dhananjay Bodas

  43. Hydrophilization and hydrophobic recovery of PDMS by oxygen plasma and chemical treatment—An SEM investigation

    Article • Sensors and Actuators B Chemical, April 2007, Elsevier

    Dr Dhananjay Bodas

  44. Capacitance-voltage characterization of electron beam induced surface cross-linked functional monomers

    Article • Applied Physics Letters, March 2007, American Institute of Physics

    Dr Dhananjay Bodas

  45. Fabrication of long-term hydrophilic surfaces of poly(dimethyl siloxane) using 2-hydroxy ethyl methacrylate

    Article • Sensors and Actuators B Chemical, January 2007, Elsevier

    Dr Dhananjay Bodas

  46. Electron beam induced surface cross-linking of functional monomers coated on silicon substrate

    Article • Materials Letters, May 2006, Elsevier

    Dr Dhananjay Bodas

  47. Formation of more stable hydrophilic surfaces of PDMS by plasma and chemical treatments

    Article • Microelectronic Engineering, April 2006, Elsevier

    Dr Dhananjay Bodas

  48. Poly(methyl methacrylate) as masking material for microelectromechanical system (MEMS) fabrication

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Dr Dhananjay Bodas

  49. Structural characterization of sputtered PMMA in argon plasma

    Article • Materials Letters, October 2005, Elsevier

    Dr Dhananjay Bodas

  50. Deposition of indium nitride films by activated reactive evaporation process – a feasibility study

    Article • Applied Surface Science, May 2005, Elsevier

    Dr Dhananjay Bodas

  51. Deposition of plasma-polymerized hydroxyethyl methacrylate (HEMA) on silicon in presence of argon plasma

    Article • Applied Surface Science, May 2005, Elsevier

    Dr Dhananjay Bodas

  52. Deposition of PTFE thin films by RF plasma sputtering on 〈100〉 silicon substrates

    Article • Applied Surface Science, May 2005, Elsevier

    Dr Dhananjay Bodas

  53. Comparative study of spin coated and sputtered PMMA as an etch mask material for silicon micromachining

    Article • Sensors and Actuators A Physical, May 2005, Elsevier

    Dr Dhananjay Bodas

  54. RF sputtered polytetrafluoroethylene—a potential masking material for MEMS fabrication process

    Article • Journal of Micromechanics and Microengineering, April 2005, Institute of Physics Publishing

    Dr Dhananjay Bodas

  55. PTFE as a masking material for MEMS fabrication

    Article • Journal of Micromechanics and Microengineering, February 2005, Institute of Physics Publishing

    Dr Dhananjay Bodas

  56. Fabrication of long-term hydrophilic elastomeric surfaces via plasma induced surface cross-linking of functional monomers

    Article • Surface and Coatings Technology, June 2004, Elsevier

    Dr Dhananjay Bodas

  57. Plasma-treated polymer as humidity sensing material—a feasibility study

    Article • Sensors and Actuators B Chemical, March 2004, Elsevier

    Dr Dhananjay Bodas

  58. Characterization of indium nitride films deposited by activated reactive evaporation process

    Article • Thin Solid Films, November 2003, Elsevier

    Dr Dhananjay Bodas

  59. Tailor-made functional surfaces: potential elastomeric biomaterials I

    Article • Journal of Biomaterials Science Polymer Edition, January 2003, Taylor & Francis

    Dr Dhananjay Bodas

  60. RF sputter deposition of poly(tetrafluoroethylene) films as masking materials for silicon micromachining

    Article • Journal of Applied Polymer Science, January 2003, Wiley

    Dr Dhananjay Bodas

  61. Deposition of silicon films in presence of nitrogen plasma—A feasibility study

    Article • Bulletin of Materials Science, October 2002, Springer Science + Business Media

    Dr Dhananjay Bodas

  62. Characterization of silicon films deposited in presence of nitrogen plasma

    Article • Vacuum, February 2002, Elsevier

    Dr Dhananjay Bodas