All Stories

  1. Optimising the structure of a cascaded modular battery system for enhancing the performance of battery packs
  2. Design and evaluation of an energy storage system for helicopters
  3. Power Electronic Converters
  4. Hybrid inverter arrangements to facilitate reduced switching losses of the main inverter
  5. Mitigating the effect of series capacitance unbalance on the voltage reduction capability of an auxiliary CSI used as switching ripple active filter
  6. Experimental validation of the solid state substation with embedded energy storage concept
  7. The effect of including power converter losses when modelling energy storage systems: A UK domestic study
  8. Development of a battery energy loss observer based on improved equivalent circuit modelling
  9. Investigations in the Modeling and Control of a Medium-Voltage Hybrid Inverter System That Uses a Low-Voltage/Low-Power Rated Auxiliary Current Source Inverter
  10. Dynamic phasor analysis and design of phase-locked loops for single phase grid connected converters
  11. A hybrid inverter system for medium voltage applications using a low voltage auxiliary CSI
  12. A hybrid converter for medium voltage using a low-voltage current source active filter connected via a series capacitor
  13. Assessing the accuracy of loss estimation methods for supercapacitor energy storage devices operating under constant power cycling
  14. A Hybrid Inverter Solution for Medium Voltage Applications using Series Capacitor and a CSI Active Power Filter (SC-APF)
  15. An Analysis of Efficiency Improvement with the Installation of Energy Storage in Power Systems
  16. Analysis of stability aspects of a large constant power load in a local grid
  17. Comparison of multilevel PWM versus interleaved based sinewave shaping for two-stage current source inverters used in PV applications
  18. Modelling and control of a multi-stage interleaved DC–DC converter with coupled inductors for super-capacitor energy storage system
  19. Repetitive and Resonant Control for a Single-Phase Grid-Connected Hybrid Cascaded Multilevel Converter
  20. Investigation in the PV Converter Smoothing Circuit Size Reduction vs. Loss in Energy Capturing
  21. Novel Integration of Wind Generator-Energy Storage Systems Within Microgrids
  22. Common Mode Voltage Cancellation in a Buck-Type Active Front-End Rectifier Topology
  23. Evaluation of a digitally controlled power electronic emulator for supercapacitor
  24. Assessing the Benefits of Hybrid Cycloconverters
  25. Achieving the desired transformer leakage inductance necessary in DC-DC converters for energy storage applications
  26. High performance multilevel converter topology for interfacing energy storage systems with medium voltage grids
  27. Characterization of energy storage devices for constant power applications
  28. Space-Vector Modulated Multilevel Matrix Converter
  29. A power electronic controlled dump load with negligible harmonics for accurate loading used in testing small wind turbines
  30. Hybrid cascaded multilevel converter with integrated series Active Power Filter for interfacing energy storage system to medium voltage grid
  31. A new duty cycle based efficiency estimation method for a supercapacitor stack under constant power operation
  32. Selecting the power electronic interface for a supercapattery based energy storage system
  33. Experimental Evaluation of Hybrid Cycloconverters
  34. A Cost-Effective Solution to Power the Gate Drivers of Multilevel Inverters using the Bootstrap Power Supply Technique
  35. Implementation of a Hybrid AC–AC Direct Power Converter With Unity Voltage Transfer
  36. A two-stage power converter for welding applications with increased efficiency and reduced filtering
  37. Hybrid power converters: An exploration of benefits
  38. Hybrid power electronic converters: An exploration of benefits
  39. Hybrid matrix converter topologies: An exploration of benefits
  40. Experimental evaluation of the indirect three-level sparse matrix converter
  41. A new matrix converter-voltage source inverter hybrid arrangement for an adjustable speed-open winding induction motor drive with improved performance
  42. A New Three-Level Indirect Matrix Converter with Reduced Number of Switches
  43. A New Modulation Method for the Three-Level-Output-Stage Matrix Converter
  44. Hybrid cycloconverters: An exploration of benefits
  45. Modulation method for the three-level-output-stage matrix converter under balanced and unbalanced supply condition
  46. A New Single-Stage Current Source Inverter for Photovoltaic and Fuel Cell Applications using Reverse Blocking IGBTs
  47. A New Three-Level Sparse Indirect Matrix Converter
  48. A New Two-Stage Voltage Source Inverter with Modulated DC-link Voltage and Reduced Switching Losses
  49. A New Hybrid Cycloconverter with Smooth Output Voltage Generation Capability and Accurate Control of the Circulating Current
  50. A Hybrid Approach to Improve the Robustness Against Unbalanced Voltage Supply and Cancel the Common Mode Voltage for a 3-ph Buck-Type Rectifier
  51. A Hybrid Approach to Improve the Robustness Against Unbalanced Voltage Supply and Cancel the Common Mode Voltage for a 3-ph Buck-Type Rectifier
  52. New modulation method for matrix converters
  53. Using reverse-blocking IGBTs in power converters for adjustable-speed drives
  54. New Methods for the Active Compensation of Unbalanced Supply Voltages for Two-Stage Direct Power Converters
  55. A predictive current control scheme for a hybrid AC/AC direct power converter
  56. Compact ASD Topologies for Single-Phase Integrated Motor Drives with Sinusoidal Input Current
  57. Modulation Method for a Multiple Drive System Based on a Two-Stage Direct Power Conversion Topology With Reduced Input Current Ripple
  58. An indirect matrix converter with a cost effective protection and control
  59. Improvement of output voltage capability of a two stage direct power converter under unbalanced input voltages
  60. Short Term Braking Capability During Power Interruptions for Integrated Matrix Converter—Motor Drives
  61. An AC/AC direct power conversion topology having multiple power grid connections with adjustable loading
  62. A new power converter for fuel cells with high system efficiency
  63. A Direct Power Electronic Conversion Topology for Multi-Drive Applications
  64. A new matrix converter motor (MCM) for industry applications
  65. Experimental evaluation of ride-through capabilities for a matrix converter under short power interruptions
  66. New solutions for a low-cost power electronic building block for matrix converters
  67. Comparison of two current modulation strategies for matrix converters under unbalanced input voltage conditions
  68. Fundamentals of the Matrix Converter Technology
  69. Limited ride-through capabilities for direct frequency converters
  70. The Matrix Converter: Overvoltages Caused By the Input Filter, Bidirectional Power Flow, and Control for Artificial Loading of Induction Motors
  71. Artificial loading of the induction motors using a matrix converter
  72. Using reverse blocking IGBTs in power converters for adjustable speed drives
  73. A new green power inverter for fuel cells
  74. Short term braking capability during power interruptions for integrated matrix converter-motor drives
  75. A new cost-effective multi-drive solution based on a two-stage direct power electronic conversion topology
  76. A new buck-type active front end rectifier topology with improved voltage transfer ratio and common mode voltage cancellation
  77. Improved control of an active-front-end adjustable speed drive with a small de-link capacitor under real grid conditions
  78. A new class of hybrid AC/AC direct power converters
  79. Converter topologies with low passive components usage for the next generation of integrated motor drives
  80. Evaluation of the converter topologies suited for integrated motor drives
  81. Hybrid Indirect Matrix Converter Immune to Unbalanced Voltage Supply, with Reduced Switching Losses and Improved Voltage Transfer Ratio
  82. Adjustable speed drives with square-wave input current: a cost effective step in development to improve their performance
  83. Hybrid Direct Power Converters with Increased/Higher than Unity Voltage Transfer Ratio and Improved Robustness against Voltage Supply Disturbances
  84. Active Compensation of Unbalanced Supply Voltage for Two-Stage Direct Power Converters Using the Clamp Capacitor
  85. Control of a two-stage direct power converter with a single voltage sensor mounted in the intermediary circuit
  86. Comparison of two current modulation strategies for matrix converters under unbalanced input voltage conditions
  87. A new generalized two-stage direct power conversion topology to independently supply multiple AC loads from multiple power grids with adjustable power loading
  88. A new modulation method for matrix converters
  89. Modulation method for a multiple drive system based on a two-stage direct power conversion topology with reduced input current ripple
  90. Implementation of a Hybrid AC/AC Direct Power Converter with Unity Voltage Transfer Ratio
  91. Stability analysis and experimental evaluation of a matrix converter drive system
  92. New steps towards a low-cost power electronic building block for matrix converters
  93. A new matrix converter-motor (MCM) for industry applications