All Stories

  1. Fire: An open-source adaptive mesh refinement solver for supersonic reacting flows
  2. Detonation diffraction in expansion channels with rounded corner
  3. Effects of incoming boundary layer on the initiation characteristics of oblique detonation waves over a compression corner
  4. Wake flow separation control on a notchback Ahmed body using sawtooth plasma actuators
  5. Numerical Study of Oblique Detonation Initiation Assisted by Local Energy Deposition
  6. Approximate Optimal Recursive Sliding Mode Control for Quadrotors and Adaptive Parameter Optimization Via Deep Reinforcement Learning
  7. On the receptivity of first and cross-flow modes in hypersonic sharp wing flows
  8. Detonation propagation in continuously curved three-dimensional ducts
  9. Prediction of shock and boundary layer interaction in supersonic/hypersonic flow over a compression ramp using deep neural networks
  10. Direct Lift Control for Carrier-Based Aircraft With Predefined-Time Incremental Strategy
  11. On theoretical modeling of underdriven oblique detonation phenomenon
  12. Global stability prediction of compression ramp flow based on deep neural networks
  13. Fast fixed-time incremental backstepping fault-tolerant control for aircraft with asymmetric wing damage
  14. Simulations of detonation wave reflection over cylindrical convex surfaces with a detailed reaction model
  15. Combined strategies of void layout and urban planning on air ventilation and pollutant removal in deep canyons
  16. Multi-Layer Path Planning for Complete Structural Inspection Using UAV
  17. Intelligent Joint Space Path Planning: Enhancing Motion Feasibility with Goal-Driven and Potential Field Strategies
  18. Acoustic–vortical evolution mechanisms of supersonic first Mack mode
  19. Predefined-Time Active Fault-Tolerant Control of Transport Aircraft Subject to Control Surface Failures
  20. Velocity-Free Adaptive Neural-Fuzzy Predefined-Time Attitude Control for Spacecraft
  21. Prescribed-Time Fault-Tolerant Flight Control for Aircraft Subject to Structural Damage
  22. Laminar-turbulent transition in a hypersonic compression ramp flow
  23. Evolution of shock-induced reactive and inert double-layer gas cylinders
  24. Transition reversal over a blunt plate at Mach 5
  25. PF-MAAC: A learning-based method for probabilistic optimization in time-constrained non-adversarial moving target search
  26. Disturbance-Observer-Based Fixed-Time Backstepping Control for Quadrotors with Input Saturation and Actuator Failure
  27. Autonomous aircraft inspection using UAV
  28. Impact of foam metal hoods on pressure waves generated by high-speed trains traversing tunnels
  29. Fast Fixed-Time Distributed Neural Formation Control-based Disturbance Observer for Multiple Quadrotor UAVs Under Unknown Disturbances
  30. Hierarchical 3D Scene Graph based Semantic-Metric SLAM for Plant Inspection and Fruit Counting in Intelligent Hydroponics System
  31. SMC-Searcher: Signal Mediated Coordination for Decentralized Multi-Robot Adversarial Moving Target Search
  32. Spatial–Temporal Diffusion Model for Underwater Scene Reconstruction With Application to AUV Navigation
  33. Adaptive Predefined-Time Disturbance Observer-Based Fast Nonsingular Sliding Mode Control Strategy for Consumer Quadrotor UAVs: Theory and Experiments
  34. A Fixed-Time Incremental Backstepping-Based Direct Lift Altitude Fault-Tolerant Control for Unilateral Horizontal-Tail-Damaged Aircraft
  35. Reach-Avoid Differential Graphical Games for Single Evader and Multiple Pursuers with Nonlinear Dynamics
  36. Analysis and applications of the upwind conservation element and solution element scheme for compressible flow simulations
  37. Mitigation mechanism of porous media hood for the sonic boom emitted from maglev tunnel portals
  38. Investigation of streamwise streak characteristics over a compression ramp at Mach 4
  39. Prediction and sensitivity analysis of the pressure wave peak value induced by the high-speed train in the long tunnel under a high geothermal environment
  40. Role of Atwood number in the shock-induced evolution of a double-layer gas cylinder
  41. Role of very large-scale motions in shock wave/turbulent boundary layer interactions
  42. The influence of hypersonic free-stream conicity on the flow over a sphere
  43. Enhancing the accuracy of physics-informed neural networks for indoor airflow simulation with experimental data and Reynolds-averaged Navier–Stokes turbulence model
  44. Accelerating flow simulations in the built environment by using the fast fluid dynamics initializer
  45. Formation and propagation characteristics of a weak shock wave in maglev tube
  46. Bi-global stability of supersonic backward-facing step flow
  47. Effects of Mach and Atwood numbers on the shock-induced evolution of a double-layer gas cylinder
  48. Effects of swirling inflow on the stability and combustion mode of rotating detonations
  49. Flying in Dynamic Scenes With Multitarget Velocimetry and Perception-Enhanced Planning
  50. Disturbance Observer-Based Model Predictive Control for an Unmanned Underwater Vehicle
  51. Coexistence of different mechanisms underlying the dynamics of supersonic turbulent flow over a compression ramp
  52. Advancing UAV-Based Inspection System: The USSA-Net Segmentation Approach to Crack Quantification
  53. Autonomous–Targetless Extrinsic Calibration of Thermal, RGB, and LiDAR Sensors
  54. Experimental Nonrobocentric Dynamic Landing of Quadrotor UAVs With On-Ground Sensor Suite
  55. Direct Numerical Simulation of High-Enthalpy Turbulent Boundary-Layer Flow with Light Gas Injections
  56. Consistent energy-based framework of amplification mechanisms for the second mode in hypersonic boundary layers
  57. Stereo Visual Inertial Pose Estimation Based on Feedforward and Feedbacks
  58. Interaction and breakdown induced by multiple optimal disturbances in hypersonic boundary layer
  59. Effect of wind-based climate-responsive design on city breathability of a compact high-rise city
  60. A Low-Cost Relative Positioning Method for UAV/UGV Coordinated Heterogeneous System Based on Visual-Lidar Fusion
  61. Disturbance Observer-Based Model Predictive Control for an Unmanned Underwater Vehicle (UUV)
  62. Numerical Study of the Effects of Injection Conditions on Rotating Detonation Engine Propulsive Performance
  63. Stabilization mechanisms of various acoustic metasurfaces on the second mode in hypersonic boundary-layer flows
  64. Stabilization of hypersonic boundary-layer instability using porous coatings under thermochemical nonequilibrium
  65. A unified explanation of energy growth sources for unstable modes in flat-plate boundary layers
  66. Effect of acoustic metasurface on hypersonic-boundary-layer wave packet
  67. Coexistence of stationary Görtler and crossflow instabilities in boundary layers
  68. Effects of control zone, exhaust rate and station extent on smoke dispersal during emergency concourse fires in underground stations
  69. Response of hypersonic compression corner flow to upstream disturbances
  70. Hydrodynamic instabilities of a dual-mode air–SF6 interface induced by a cylindrically convergent shock
  71. A Novel Real-Time Autonomous Crack Inspection System Based on Unmanned Aerial Vehicles
  72. Influence of thermochemical nonequilibrium on expansion tube air test conditions: A numerical study
  73. Transmission mitigation of COVID-19: Exhaled contaminants removal and energy saving in densely occupied space by impinging jet ventilation
  74. Stability of hypersonic flow over a curved compression ramp
  75. Application: Compressible Multi-fluid Flows
  76. Application: Detonations
  77. CESE Schemes with Numerical Dissipation
  78. Filtering 2D-3D Outliers by Camera Adjustment for Visual Odometry
  79. High-Order CESE Schemes
  80. Introduction
  81. Multi-dimensional CESE Schemes
  82. Non-dissipative Core Scheme of CESE Method
  83. Numerical Features of CESE Schemes
  84. Other Applications
  85. Space–Time Conservation Element and Solution Element Method
  86. Summary
  87. Thermal Effects on the Performance of a Nanosecond Dielectric Barrier Discharge Plasma Actuator at Low Air Pressure
  88. Stabilization effect of acoustic metasurfaces on broadband disturbances in a Mach 6 boundary-layer flow
  89. Nonlinear interactions of global instabilities in hypersonic laminar flow over a double cone
  90. High-Speed Three-Dimensional Aerial Vehicle Evasion Based on a Multi-Stage Dueling Deep Q-Network
  91. Heat transfer and behavior of the Reynolds stress in Mach 6 boundary layer transition induced by first-mode oblique waves
  92. Sensitivity analysis on supersonic-boundary-layer stability: Parametric influence, optimization, and inverse design
  93. Deep Pose Graph-Matching-Based Loop Closure Detection for Semantic Visual SLAM
  94. Neural Network Based Model Predictive Control for a Quadrotor UAV
  95. A Novel Multispectral Line Segment Matching Method Based on Phase Congruency and Multiple Local Homographies
  96. Air thermochemistry in the converging section of de Laval nozzles on hypersonic wind tunnels
  97. Autonomous Exploration of Unknown Indoor Environments for High-Quality Mapping Using Feature-Based RGB-D SLAM
  98. Double-layer acoustic metasurface for the suppression of the Mack second mode in hypersonic boundary-layer flow
  99. Control of supersonic compression corner flow using a plasma actuator
  100. Numerical investigation on reacting shock-bubble interaction at a low Mach limit
  101. State-Specific Study of Air in the Expansion Tunnel Nozzle and Test Section
  102. Thermochemical nonequilibrium effects on high-enthalpy double-wedge flows
  103. On the Vibrational State-Specific Modeling of Radiating Normal Shocks in Air
  104. Development of Fixed-Wing UAV 3D Coverage Paths for Urban Air Quality Profiling
  105. Characterization of reflected shock tunnel air conditions using a simple method
  106. Transition to turbulence in hypersonic flow over a compression ramp due to intrinsic instability
  107. Mechanisms of the destabilized Mach reflection of inviscid oblique detonation waves before an expansion corner
  108. Broadband design of acoustic metasurfaces for the stabilization of a Mach 4 boundary layer flow
  109. An experimental study of formation of stabilized oblique detonation waves in a combustor
  110. Numerical investigation of supersonic flow over a parachute-like configuration including turbulent flow effects
  111. Three-dimensionality of hypersonic laminar flow over a double cone
  112. An End-to-End UAV Simulation Platform for Visual SLAM and Navigation
  113. Proactive Guidance for Accurate UAV Landing on a Dynamic Platform: A Visual–Inertial Approach
  114. Effects of building setback on thermal comfort and air quality in the street canyon
  115. Broadband Design of Acoustic Metasurfaces for the Stabilization of a Mach 4 Boundary Layer Flow
  116. Dynamic Object Tracking on Autonomous UAV System for Surveillance Applications
  117. Aerodynamic Performance of a Nanostructure-Induced Multistable Shell
  118. Review of unsteady aerodynamics of supersonic parachutes
  119. Leading-edge bluntness effects on hypersonic three-dimensional flows over a compression ramp
  120. Performance Deterioration of Pitot Tubes Caused by In-Flight Ice Accretion: A Numerical Investigation
  121. Review on pollutant dispersion in urban areas-part B: Local mitigation strategies, optimization framework, and evaluation theory
  122. Occurrence of global instability in hypersonic compression corner flow
  123. Flow control of a D-shaped bluff body using different DBD plasma actuators
  124. Control of Reflected Waves with Acoustic Metasurfaces for Hypersonic Boundary-Layer Stabilization
  125. Review on pollutant dispersion in urban areas-part A: Effects of mechanical factors and urban morphology
  126. Learning-Based Autonomous UAV System for Electrical and Mechanical (E&M) Device Inspection
  127. Unsteady effects in a hypersonic compression ramp flow with laminar separation
  128. Formation of stabilized oblique detonation waves in a combustor
  129. Numerical assessments of wind power potential and installation arrangements in realistic highly urbanized areas
  130. Multilayer Mapping Kit for Autonomous UAV Navigation
  131. Growth mechanisms of second-mode instability in hypersonic boundary layers
  132. Linear stability analysis of one-dimensional detonation coupled with vibrational relaxation
  133. On the conservative property of particle-based Fokker–Planck method for rarefied gas flows
  134. Numerical analysis of the vibration-chemistry coupling effect on one-dimensional detonation stability
  135. Stabilization of a Two-Dimensional Hypersonic Boundary Layer Using a Shallow Cavity
  136. Richtmyer–Meshkov instability on a dual-mode interface
  137. An Actuator Allocation Method for a Variable-Pitch Propeller System of Quadrotor-Based UAVs
  138. Effects of height-asymmetric street canyon configurations on outdoor air temperature and air quality
  139. Transition Optimization for a VTOL Tail-Sitter UAV
  140. Space–Time Conservation Element and Solution Element Method and Its Applications
  141. Thermal Effect on the Performance of an Alternating-Current Dielectric-Barrier-Discharge Plasma Actuator
  142. Effects of frontal area density on outdoor thermal comfort and air quality
  143. Effects of Different Particle Size Distributions on Aluminum Particle–Air Detonation
  144. Hypersonic flow over spherically blunted double cones
  145. The re-initiation mechanism of detonation diffraction in a weakly unstable gaseous mixture
  146. Perception in the Dark; Development of a ToF Visual Inertial Odometry System
  147. Theoretical Modeling of Porous Coatings with Simple Microstructures for Hypersonic Boundary-Layer Stabilization
  148. Numerical study of the Richtmyer–Meshkov instability of a three-dimensional minimum-surface featured SF6/air interface
  149. Design and Analysis of a Valveless Impedance Pump for a Direct Sodium Borohydride–Hydrogen Peroxide Fuel Cell
  150. Evolution of shock-accelerated heavy gas layer
  151. Interfacial instability at a heavy/light interface induced by rarefaction waves
  152. Interaction of a planar shock wave and a water droplet embedded with a vapour cavity
  153. System Identification and Control for a Tail-Sitter Unmanned Aerial Vehicle in the Cruise Flight
  154. Spatial Direct Numerical Simulation of the Hypersonic Boundary-Layer Stabilization Using Porous Coatings
  155. Application of CE/SE method to gas-particle two-phase detonations under an Eulerian-Lagrangian framework
  156. Position control of a tail-sitter UAV using successive linearization based model predictive control
  157. Numerical study on Rayleigh-Taylor effect on cylindrically converging Richtmyer-Meshkov instability
  158. Numerical investigation of hypervelocity shock-wave/boundary-layer interactions over a double-wedge configuration
  159. Flow Control on a Bluff Body Using Dielectric Barrier Discharge Plasma Actuators
  160. Reverse Design of Ultrasonic Absorptive Coating for the Stabilization of Mack Modes
  161. Maximum entropy modeling of oxygen vibrational excitation and dissociation
  162. Impedance-Near-Zero Acoustic Metasurface for Hypersonic Boundary-Layer Flow Stabilization
  163. Recent advances in fuel cells based propulsion systems for unmanned aerial vehicles
  164. Prediction of half reaction length for H2O2Ar detonation with an extended vibrational nonequilibrium Zel'dovich −von Neumann −Döring (ZND) model
  165. Numerical study on the jet formation of simple-geometry heavy gas inhomogeneities
  166. Stabilization of a Mach 6 Boundary Layer Using a Two-Dimensional Cavity
  167. Model-Aided Wind Estimation Method for a Tail-Sitter Aircraft
  168. Design and implementation of a real-time hardware-in-the-loop testing platform for a dual-rotor tail-sitter unmanned aerial vehicle
  169. Numerical investigation of oxygen thermochemical nonequilibrium on high-enthalpy double-cone flows
  170. Transition Between Different Initiation Structures of Wedge-Induced Oblique Detonations
  171. Chemical reaction mechanism related vibrational nonequilibrium effect on the Zel'dovich−von Neumann−Döring (ZND) detonation model
  172. Effects of vibrational nonequilibrium on hypersonic shock-wave/laminar boundary-layer interactions
  173. Numerical Study on Liquid Droplet Internal Flow Under Shock Impact
  174. Development of Model Predictive Controller for a Tail-Sitter VTOL UAV in Hover Flight
  175. Detonation-Driven Fuel-Injection System for Supersonic Combustion Testing Facilities
  176. Theoretical Modeling and Optimization of Porous Coating for Hypersonic Laminar Flow Control
  177. Full-scale Improved Delayed Detached Eddy Simulation of Transverse Hydrogen Jet in Supersonic Combustion
  178. Long-term effect of Rayleigh–Taylor stabilization on converging Richtmyer–Meshkov instability
  179. Oscillations of Leading-Edge Vortex Breakdown Locations over a Delta Wing
  180. Numerical simulation of local wall heating and cooling effect on the stability of a hypersonic boundary layer
  181. Theoretical investigation of shock stand-off distance for non-equilibrium flows over spheres
  182. Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods
  183. Extension of CE/SE method to non-equilibrium dissociating flows
  184. Model Predictive Control for Path Tracking of a VTOL Tailsitter UAV in an HIL Simulation Environment
  185. High-speed unsteady flows past two-body configurations
  186. Labyrinthine and secondary wave instabilities of a miscible magnetic fluid drop in a Hele-Shaw cell
  187. Numerical investigation of effects of angle-of-attack on a parachute-like two-body system
  188. Optimization procedures for enhancement of city breathability using arcade design in a realistic high-rise urban area
  189. Hierarchy in air travel: Few large and many small
  190. Leading edge vortex control on a delta wing with dielectric barrier discharge plasma actuators
  191. Numerical simulation of cooling effect of vegetation enhancement in a subtropical urban park
  192. Investigation on Shock Induced Stripping Breakup Process of A Liquid Droplet
  193. Maximum-principle-satisfying space-time conservation element and solution element scheme applied to compressible multifluids
  194. Enhancement of city breathability with half open spaces in ideal urban street canyons
  195. Labyrinthine instabilities of miscible magnetic fluids in a rotating Hele-Shaw cell
  196. Dynamic Modeling and Hardware-In-Loop Simulation for a Tail-Sitter Unmanned Aerial Vehicle in Hovering Flight
  197. A Characteristic Space–Time CE/SE Method for Shock Capturing
  198. Evaluation of aptamer specificity with or without primers using clinical samples for C-reactive protein by magnetic-assisted rapid aptamer selection
  199. Study of Hypersonic Dissociating Flows over Spheres Using the Space-Time CE/SE Method
  200. Assessment of Vibrational Non-Equilibrium Effect on Detonation Cell Size
  201. A Camera-Based Target Detection and Positioning UAV System for Search and Rescue (SAR) Purposes
  202. Development and Testing of a Two-UAV Communication Relay System
  203. Experimental investigation on flow characteristics of a four-wing micro air vehicle
  204. A Numerical Study of Droplet Impingement for In-Flight Ice Accretion Prediction
  205. Leading Edge Vortex Control on a Delta Wing With Dielectric Barrier Discharge Actuators
  206. The evolution of helicopters
  207. Numerical Investigation of the Effect of Capsule Half-Cone Angle on a Supersonic Parachute System
  208. Investigation on Wind Environments of Surrounding Open Spaces Around a Public Building
  209. Optimization of lift force for a bio-inspired flapping wing model in hovering flight
  210. Estimation of wind power generation in dense urban area
  211. Asymmetric Flow Control on a Delta Wing with Dielectric Barrier Discharge Actuators
  212. A characteristic space–time conservation element and solution element method for conservation laws II. Multidimensional extension
  213. Parametric Study on Aerodynamic Interaction of Supersonic Parachute System
  214. Numerical Simulation of Ionized Hypersonic Flows using the Space-Time CE/SE Method
  215. Numerical analysis of hypersonic flows around blunt-nosed models and a space vehicle
  216. Effects of suspension line on flow field around a supersonic parachute
  217. A characteristic space–time conservation element and solution element method for conservation laws
  218. Robust high-order space–time conservative schemes for solving conservation laws on hybrid meshes
  219. Using the central ventilation shaft design within public buildings for natural aeration enhancement
  220. Application of Valve-Less Impedance Pumps to a Direct Sodium Borohydride–Hydrogen Peroxide Fuel Cell
  221. Application of CE/SE Method to Study Hypersonic Non-equilibrium Flows over Spheres
  222. Repair of articular cartilage in rabbit osteochondral defects promoted by extracorporeal shock wave therapy
  223. Application of a Valveless Impedance Pump in a Liquid Cooling System
  224. Numerical Simulation of Air-He Shock Tube Flow with Equilibrium Air Model
  225. Parametric study of helix configuration in ribbed lip seal
  226. An innovative numerical approach to resolve the pulse wave velocity in a healthy thoracic aorta model
  227. Simulation Methodology on Analyzing Clamping Mode for Single Proton Exchange Membrane Fuel Cell
  228. Numerical analysis of a rapid magnetic microfluidic mixer
  229. New deflected-helix ribbed lip seal with enhanced sealing performance
  230. An Axial Velocity Profile Method to Derive the Aortic Pulse-Wave Velocity in Diabaetic Patients
  231. Thermal management of a proton exchange membrane fuel cell stack with pyrolytic graphite sheets and fans combined
  232. Effects of sweep rates of external magnetic fields on the labyrinthine instabilities of miscible magnetic fluids
  233. Numerical Simulation of Complex Internal Viscous Flow in the HyShot-II Scramjet Model
  234. A Novel Inflatable Belt-Type Clamp in Open Heart Surgery
  235. Flow analysis of a ribbed helix lip seal with consideration of fluid–structure interaction
  236. A standing wave model for acoustic pumping effect in microchannels
  237. Nonequilibrium recombination after a curved shock wave
  238. Rapid micromixer via ferrofluids
  239. Natural convection of magnetic fluid in a rectangular Hele–Shaw cell of different aspect ratios
  240. Rapid magnetic microfluidic mixer utilizing AC electromagnetic field
  241. Investigation of Pulsatile Flowfield in Healthy Thoracic Aorta Models
  242. Preliminary Design and Simulation of Reflected Shock Tunnel in Taiwan
  243. Experimental study of clamping effects on the performances of a single proton exchange membrane fuel cell and a 10-cell stack
  244. Design, analysis and optimization of an electromagnetic actuator for a micro impedance pump
  245. Nonequilibrium Recombination After a Curved Shock Wave (Hornung Invited Session)
  246. Analysis of flow field around a ribbed helix lip seal
  247. Performance of a proton exchange membrane fuel cell stack with thermally conductive pyrolytic graphite sheets for thermal management
  248. Design and characterization of MEMS-based flow-rate and flow-direction microsensor
  249. In vitro characterization of aortic flow using numerical simulation, phase-contrast magnetic resonance imaging, and particle tracking images
  250. Electrokinetic instability effects in microchannels with and without nanofilm coatings
  251. Design and fabrication of novel micro electromagnetic actuator
  252. Shock–vortex interactions in a soap film
  253. Design and fabrication of a novel micro electromagnetic actuator
  254. Application of a thermally conductive pyrolytic graphite sheet to thermal management of a PEM fuel cell
  255. A MEMS-based valveless impedance pump utilizing electromagnetic actuation
  256. An Electromagnetic Actuator in Lab-on-a-Chip Systems
  257. Experimental studies of labyrinthine instabilities of miscible ferrofluids in a Hele-Shaw cell
  258. Theoretical analysis and optimization of electromagnetic actuation in a valveless microimpedance pump
  259. Labyrinthine instability of a miscible magnetic drop
  260. Design and modeling of electromagnetic actuator in mems-based valveless impedance pump
  261. Simulation and experimentation on the contact width and pressure distribution of lip seals
  262. Quantification of the pulse wave velocity of the descending aorta using axial velocity profiles from phase-contrast magnetic resonance imaging
  263. The application of μPIV technique in the study of magnetic flows in a micro-channel
  264. Natural convection of magnetic fluid in a rectangular Hele-Shaw cell
  265. Air-damping effects on developing velocity profiles in flowing soap films
  266. On the drag of two-dimensional flow about a circular cylinder
  267. Experimental and numerical study of the separation angle for flow around a circular cylinder at low Reynolds number
  268. Measurement of thermal contact resistance of aluminum honeycombs
  269. Analogy between soap film and gas dynamics. II. Experiments on one-dimensional motion of shock waves in soap films
  270. THERMAL CONTACT RESISTANCE OF ALUMINUM HONEYCOMBS ACROSS BOLTED JOINTS
  271. Analogy between soap film and gas dynamics. I. Equations and shock jump conditions
  272. THERMAL CONTACT RESISTANCE OF ALUMINUM HONEYCOMBS ACROSS BOLTED JOINTS
  273. Numerical simulations of miscible magnetic flows in a Hele–Shaw cell
  274. Flow visualization of natural convection of magnetic fluid in a rectangular Hele-Shaw cell
  275. The oscillatory squeeze flow of electrorheological fluid considering the inertia effect
  276. An experimental investigation of thermal contact conductance across bolted joints
  277. Interpretation of color fringes in flowing soap films
  278. A soap film shock tube to study two-dimensional compressible flows
  279. Two-dimensional vortex shedding of a circular cylinder
  280. Non-equilibrium dissociating flow over spheres
  281. A MEMS-based Impedance Pump Based on a Magnetic Diaphragm