All Stories

  1. Chip-Level Surface Patterning Solutions Towards High-Throughput, Parallel Surface Modulation of 1D Nanomaterials
  2. Gas Flow Sensing with a Piezoresistive Silicon Nanowire-Based MEMS Force Sensor
  3. Machine learning-driven atomistic analysis of mechanical behavior in silicon nanowires
  4. Understanding intrinsic stress effects on vibrational response of silicon nanowires
  5. The impact of the vitamin D and resveratrol administration on the stiffness and elasticity of T2DM rat aorta associated with the trace element and mineral levels
  6. Towards Fabrication of Next-Generation Physical Sensors Through Integrating Suspended Sub-Micron Silicon Nanowires with Microelectromechanical Systems
  7. Multiscale Fabrication and Characterization of a NEMS Force Sensor
  8. Investigation of the Bending Behavior in Silicon Nanowires: A Nanomechanical Modeling Perspective
  9. An analytical-atomistic model for elastic behavior of silicon nanowires
  10. High-Throughput Vibrational Testing of Silicon Nanowires
  11. Stencil-Based Selective Surface Functionalization of Silicon Nanowires in 3D Device Architectures for Next-Generation Biochemical Sensors
  12. Mechanical properties of silicon nanowires with native oxide surface state
  13. Machine Learning Insights into the Elasticity of Bottom-Up Silicon Nanowires
  14. Simplified top-down fabrication of sub-micron silicon nanowires
  15. Selective Surface Metallization of Single Crystal Silicon Nanowires via Stencil Lithography
  16. Innovative MEMS Stage for Automated Micromechanical Testing
  17. Nanomechanical Modeling of the Bending Response of Silicon Nanowires
  18. Stencil lithography for bridging MEMS and NEMS
  19. Silicon Nanowires Driving Miniaturization of Microelectromechanical Systems Physical Sensors: A Review
  20. The role of native oxide on the mechanical behavior of silicon nanowires
  21. Mechanical Properties of Silicon Nanowires with Native Oxide Surface State
  22. Effect of Native Oxide on Stress in Silicon Nanowires: Implications for Nanoelectromechanical Systems
  23. Use of an elastic buffer layer for improved performance of a polymer microcylinder ring resonator hydrogen sensor
  24. The Role of Native Oxide on the Mechanical Behavior of Silicon Nanowires
  25. A new characterization approach to study the mechanical behavior of silicon nanowires
  26. Molecular Dynamics Study of Orientation-dependent Tensile Properties of Si Nanowires with Native Oxide: Surface Stress and Surface Energy Effects
  27. Impact of the surface modifications and cell culture techniques on the biomechanical properties of PDMS in relation to cell growth behavior
  28. Evaluation of the Effects of Aging on the Aorta Stiffness in Relation with Mineral and Trace Element Levels: an Optimized Method via Custom-Built Stretcher Device
  29. Silk as a biodegradable resist for field-emission scanning probe lithography
  30. A detailed investigation of the effect of calcium crosslinking and glycerol plasticizing on the physical properties of alginate films
  31. Impact of PDMS surface treatment in cell-mechanics applications
  32. Real- and Q-space travelling: multi-dimensional distribution maps of crystal-lattice strain (ɛ044) and tilt of suspended monolithic silicon nanowire structures
  33. Line edge roughness metrology software
  34. Electromechanical modeling of silicon nanowire switches: Size and boundary condition effects
  35. Observation of coupled mechanical resonance modes within suspended 3D nanowire arrays
  36. Stress relaxation and humidity dependence in sodium alginate-glycerol films
  37. Mechanical properties of honeycomb nanoporous silicon: a high strength and ductile structure
  38. A Review on Size-Dependent Mechanical Properties of Nanowires
  39. Surface Stress Effect on Silicon Nanowire Mechanical Behavior: Size and Orientation Dependence
  40. Monolithic Fabrication of Silicon Nanowires Bridging Thick Silicon Structures
  41. Poisson's ratio of PDMS thin films
  42. Sensitivity of compositional measurement of high-pressure fluid mixtures using microcantilever frequency response
  43. A deformation-based approach to tuning of magnetic micromechanical resonators
  44. Fabrication of optical nanodevices through field-emission scanning probe lithography and cryogenic etching
  45. Field-emission scanning probe lithography with self-actuating and self-sensing cantilevers for devices with single digit nanometer dimensions
  46. Piezoresistive silicon nanowire resonators as embedded building blocks in thick SOI
  47. Determination of composition of ethanol-CO 2 mixtures at high pressures using frequency response of microcantilevers
  48. Monolithic technology for silicon nanowires in high-topography architectures
  49. Characterization of fluid mixtures at high pressures using frequency response of microcantilevers
  50. A Monolithic Approach to Downscaling Silicon Piezoresistive Sensors
  51. Integrated humidity sensor based on SU-8 polymer microdisk microresonator
  52. Selecting the optimum engineering model for the frequency response of fcc nanowire resonators
  53. Piezoresistivity characterization of silicon nanowires through monolithic MEMS
  54. High-resolution spatiotemporal strain mapping reveals non-uniform deformation in micropatterned elastomers
  55. Top-down technique for scaling to nano in silicon MEMS
  56. Superplastic behavior of silica nanowires obtained by direct patterning of silsesquioxane-based precursors
  57. Optical sensor for humidity and hydrogen gas based on polymer microresonators
  58. Thermo-coupled Surface Cauchy–Born theory: An engineering finite element approach to modeling of nanowire thermomechanical response
  59. A deep etching mechanism for trench-bridging silicon nanowires
  60. Time-resolved local strain tracking microscopy for cell mechanics
  61. Micro-Scale Cyclic Bending Response of NiTi Shape Memory Alloy
  62. Determination of the Elastic Behavior of Silicon Nanowires within a Scanning Electron Microscope
  63. Effect of geometry in frequency response modeling of nanomechanical resonators
  64. A Numerical Simulation for the Stress Effect in Flexural Micro/Nano Electromechanical Resonators
  65. Determination of viscosity and density of fluids using frequency response of microcantilevers
  66. Multiscale coupling based on quasicontinuum method in nanowires at finite temperatures
  67. Residual stress gradients in electroplated nickel thin films
  68. Monolithic fabrication of silicon nanowires
  69. Microcantilever based disposable viscosity sensor for serum and blood plasma measurements
  70. Frequency response of microcantilevers immersed in gaseous, liquid, and supercritical carbon dioxide
  71. Monolithic integration of Si nanowires with metallic electrodes: NEMS resonator and switch applications
  72. MEMS biosensor for detection of Hepatitis A and C viruses in serum
  73. MEMS biosensor for parallel and highly sensitive and specific detection of hepatitis
  74. Detection of human κ-opioid antibody using microresonators with integrated optical readout
  75. Magnetic actuated MOEMS resonant biosensor array
  76. Deterministic assembly of channeling cracks as a tool for nanofabrication
  77. Monolithic Integration of Silicon Nanowires With a Microgripper
  78. Micro-Nano Integration
  79. Controlled observation of nondegenerate cavity modes in a microdroplet on a superhydrophobic surface
  80. On heat transfer at microscale with implications for microactuator design
  81. Strain-controlled bulge test
  82. A Magnetically Actuated Resonant Mass Sensor With Integrated Optical Readout
  83. Resonant cantilever bio sensor with integrated grating readout
  84. Design and integration of a bimorph thermal microactuator with electrostatically actuated microtweezers
  85. Erratum to “An enhanced analytical model for residual stress prediction in machining” [CIRP Ann. 57 (1) (2008) 81–84]
  86. An enhanced analytical model for residual stress prediction in machining
  87. Microgrippers: a case study for batch-compatible integration of MEMS with nanostructures
  88. Route to batch-compatible fabrication of nanotweezers by guided self-assembly
  89. Analytical modelling of residual stresses in machining
  90. Junction formation during desiccation cracking
  91. Self-assembly-based batch fabrication of nickel–iron nanowires by electroplating
  92. Batch Fabrication of Self-assembled Nickel-Iron Nanowires by Electrodeposition
  93. Guided self-assembly of metallic nanowires and channels
  94. Biaxial testing of nanoscale films on compliant substrates: Fatigue and fracture
  95. On the interface debond at the edge of a thin film on a thick substrate
  96. Self-Assembled Nano Wires
  97. Analytical modeling of electrostatic membrane actuator for micro pumps