All Stories

  1. Tuning the wetting properties of Paraloid B72 from hydrophilicity to superamphiphobicity combined with antibacterial properties
  2. Self-Organization in Metal Plasticity: An ILG Update
  3. Near-Surface-Mounted CFRP Ropes as External Shear Reinforcement for the Rehabilitation of Substandard RC Joints
  4. Investigation of the Rheological Properties and Ageing Susceptibility of Bitumen Bio-Modified with Spent Coffee Grounds
  5. Validating Concrete-to-Concrete Interfacial Modeling through a Multiparametric Experimental Campaign
  6. Utilizing LDPE as a Second Life of Waste Plastic Through Pellet Extruder 3D Printing
  7. Enhancing Clay-Based 3D-Printed Mortars with Polymeric Mesh Reinforcement Techniques
  8. Bio-Modified Bitumen: A Comparative Analysis of Algae Influence on Characteristic Properties
  9. Highly sensitive resistance spectroscopy technique for online monitoring of biofilm growth on metallic surfaces
  10. Interpreting the setting time of cement pastes for modelling mechanical properties
  11. On the Effect of Volumetric Energy Density on the Characteristics of 3D-Printed Metals and Alloys
  12. Transport in a stochastic double diffusivity model
  13. Effect of Whitening Toothpastes with Different Active Agents on the Abrasive Wear of Dentin Following Tooth Brushing Simulation
  14. On the Use of Microstructure Characteristics to Predict Metal Matrix Composites’ Macroscopic Mechanical Behavior
  15. Effect of tooth brushing simulation on the surface properties of various resin‐matrix computer‐aided design/computer‐aided manufacturing ceramics
  16. 3D printed Inconel mechanical response related to volumetric energy density
  17. THREE-DIMENSIONAL STRAIN/STRESS FIELDS IN BERKOVICH/VICKERS INDENTATION: COMPARISONS WITH THIN FILM DELAMINATION AND SHEAR BAND FORMATION
  18. Effect of air-abrasion pretreatment with three bioactive materials on enamel susceptibility to erosion by artificial gastric juice
  19. Experimental investigation and analytical modelling of the roughness and bonding agent influence on the old-to-repair concrete interfacial bonding strength
  20. Generalized Aifantis strain gradient plasticity model with internal length scale dependence on grain size, sample size and strain
  21. A Note on Gradient/Fractional One-Dimensional Elasticity and Viscoelasticity
  22. A new method for interpreting Vickers indentation measurements
  23. GRADIENTS AND INTERNAL LENGTHS IN SMALL SCALE PROBLEMS OF MECHANICS
  24. INTERNAL LENGTH GRADIENT APPROACH TO PYRAMIDAL/SPHERICAL NANOINDENTATION EXPERIMENTS
  25. Evaluation of Monomer Elution and Surface Roughness of a Polymer-Infiltrated Ceramic Network CAD–CAM Material After Er,Cr:YSGG Laser-assisted Tooth Bleaching
  26. Use of Posidonia oceanica fibres in lime mortars
  27. Modelling triple diffusion of 63Ni in UFG Cu–Zr ingots
  28. Stochastic Dynamic Analysis of Cultural Heritage Towers up to Collapse
  29. Assessment and Fragility of Byzantine Unreinforced Masonry Towers
  30. On the use of confocal microscopy for calculating the surface microroughness and the respective hydrophobic properties of marble specimens
  31. A gradient elastic homogenisation model for brick masonry
  32. From Gradient Elasticity to Gradient Interatomic Potentials: The Case-Study of Gradient London Potential
  33. Capturing slip band formation in Ni3Al nanocubes during compression
  34. Modelling double diffusion in soils and materials
  35. On the role of higher order deformation gradients in necking, spinodal decomposition and neuron firing
  36. On stochastic resonance in a model of double diffusion
  37. A statistical study of precursor activity in earthquake-induced landslides
  38. “Pop-in” and “pop-out” effect in monocrystalline silicon. A statistical investigation
  39. Capturing the evaporation process of water drops on sticky superhydrophobic polymer-nanoparticle surfaces
  40. Gradient elasticity used as a new method for nanoindentation experiments
  41. Gradient plasticity used for modeling extrinsic and intrinsic size effects in the torsion of Au microwires
  42. interpretation of compression experiments of micropillars
  43. On the constitutive equations of fresh mortar
  44. On the interpretation of the indentation size effect (ISE) through gradient theory for Vickers and Berkovich indenters
  45. Correlating the internal length in strain gradient plasticity theory with the microstructure of material
  46. Capturing the stochastic mechanical behavior of micro and nanopillars
  47. A statistical study of precursor activity in rain-induced landslides
  48. Strain localization and strain propagation in collapsible solid foams
  49. 1D Gradient Material Mechanics with Applications at the Nanoscale
  50. Probing the mechanical properties of dental porcelain through nanoindentation
  51. Modeling Strain Localization Bands in Metal Foams
  52. Roughening and pinning of interface cracks in shear delamination of thin films
  53. Hall–Petch revisited at the nanoscale
  54. Yielding and tensile behavior of nanocrystalline copper
  55. Nucleation of interfacial shear cracks in thin films on disordered substrates
  56. Application of Gradient Theory and Quantized Fracture Mechanics in Snow Avalanches
  57. Fracture Toughness of Snow: The Influence of Layered Microstructure
  58. Deformation vs. flow and wavelet-based models of gradient plasticity: Examples of axial symmetry
  59. Strain gradient and wavelet interpretation of size effects in yield and strength
  60. Size Effects in Tension: Gradient Internal Variable and Wavelet Models
  61. Recent Developments in Gradient Plasticity—Part II: Plastic Heterogeneity and Wavelets
  62. Scale-dependent constitutive relations and the role of scale on nominal properties
  63. Gradient Constitutive Equations, Size Effects and Artificial Neural Networks
  64. Size Effects on Tensile Strength and Fracture Energy In Concrete: Wavelet vs. Fractal Approach
  65. On the decoupling of position and force controllers in constrained robotic tasks
  66. On the decoupling of position and force controllers in constrained robotic tasks