All Stories

  1. A generative approach for synthetic image-response in surface plasmon resonance sensors
  2. Sensitivity Limits of SPR Sensors for Trace Acetone Detection in Breath Condensate
  3. Smartphone-Based Screening Colorimetry for APHA (Hazen) Color Assessment in Liquids
  4. Surface Plasmon Resonance Sensor for Acetone Detection in Breath Condensate
  5. A Compact and Smart Platform for Electrochemical Surface Plasmon Resonance Sensing
  6. Rapid, label-free surface plasmon resonance discrimination between Bothrops and Crotalus venoms using clinical antivenom as the capture reagent
  7. Smartphone-Based Screening Colorimetry for APHA (Hazen) Color Assessment in Liquids
  8. Smartphone-Based Screening Colorimetry for APHA (Hazen) Color Assessment in Liquids
  9. Soft Adaptive Virtual Impedance Control for Fault Ride-Through of Grid-Forming Inverters
  10. Soft Adaptive Virtual Impedance Control for Fault Ride-Through of Grid-Forming Inverters
  11. State of Health Estimation for Lithium-Ion Batteries Using Machine Learning and Pseudo-Synthetic Data
  12. Design of surface plasmon resonance sensor enhanced by graphene deposition for breast cancer detection
  13. A Transient Stability Enhancement Method for Grid-Forming Converters Enabling Operation Across the Four-Quadrant Range of Power Angle
  14. Rapid, label-free surface plasmon resonance discrimination between Bothrops and Crotalus venoms using clinical antivenom as the capture reagent
  15. Online Estimation of DC-link Capacitor Parameters of Three-Level NPC Converters Using Inherent Signals Analysis
  16. Trade-off between flight performance and energy consumption of a quadrotor
  17. A transient stability enhancement method for Grid-Forming converters enabling operation across the four-quadrant range of Power Angle
  18. Operating Grid-Forming Converters with Power Angle in the Four-Quadrant Range
  19. Intelligent Surface Plasmon Resonance Sensor for Refractive Index Substance Identification With Convolutional Neural Network Image-Based Model
  20. Multiobjective Constrained Optimization for Graphene-Based Plasmonic Sensor Design
  21. Operating Grid-Forming Converters with Power Angle in the Four-Quadrant Range
  22. The Development of a Malleable Model for Critical System Supervision Integration
  23. A Methodology for Analysis and Design of Dispatchable Virtual Oscillator Grid-Forming Control Methods
  24. A Malleable Model Development for Critical Systems Supervision Integration
  25. A Model for a Lithium-Polymer Battery Based on a Lumped Parameter Representation of the Charge Diffusion
  26. A coloured Petri nets-based system for validation of biomedical signal acquisition devices
  27. Assessing the Time Evolution of COVID-19 Effective Reproduction Number in Brazil
  28. Synchronizing a collaborative arm’s digital twin in real-time
  29. Electric Flight in Extreme and Uncertain Urban Environments
  30. Estimating the Loss of Effectiveness of UAV Actuators in the Presence of Aerodynamic Effects
  31. Dielectric Function of Gold Nanoparticles Synthesized Using Camellia sinensis Extract
  32. A Multilevel Open-End Winding Six-Phase Induction Motor Drive Topology Based on Three Two-Level Three-Phase Inverters
  33. A Range Prediction Method for All-Electric Aircraft by Capacity Discretization-based Iterative Convex Programming
  34. Evaluating the Use of Surface Plasmon Resonance-Based Sensing for Colorectal Mucosa Cancer Detection
  35. PUC Converter Based on AC-DC-AC Multilevel Topologies With a Shared Leg
  36. Single-Phase AC-DC-AC Multilevel Five-leg Converter Based on a High-Frequency Transformer
  37. Improving the Estimation of a Sucker Rod Pumping Dynamometer Card Based on the Terminal Quantities of the Driving Motor
  38. Trade-off between flight performance and energy consumption of a quadrotor
  39. Optical tracking system based on COTS components
  40. Desensitized Optimal Control of Electric Aircraft Subject to Electrical–Thermal Constraints
  41. AutoMoDe-Mate: Automatic off-line design of spatially-organizing behaviors for robot swarms
  42. In Silico Study of the Surface Plasmon Resonance Use for Detecting Cancer in the Colorectal Mucosa
  43. Aerodynamic Effects Compensation on Multi-Rotor UAVs Based on a Neural Network Control Allocation Approach
  44. A variable gain physiological controller for a rotary left ventricular assist device
  45. An Inverse Problem Approach for Parameter Estimation of Cardiovascular System Models
  46. Simulating cardiac disorders with a lumped parameter synergistic model
  47. A Multilevel Open-End Winding Six-Phase Induction Motor Drive Topology Based on Three Two-Level Three-Phase Inverters
  48. PUC Converter Based on AC-DC-AC Multilevel Topologies with a Shared Leg
  49. Single-Phase AC-DC-AC Multilevel Five-leg Converter Based on a High-Frequency Transformer
  50. Single-Stage Isolated Half-Bridge/Full-Bridge Converter for DC/AC Applications
  51. An image generator based on neural networks in GPU
  52. Representing the Accumulator Ageing in an Automotive Lead-Acid Battery Model
  53. Controle da locomoção de um robô de tração diferencial: problema de estabilização na postura [Not available in English]
  54. Computational model for identifying stereotyped behaviors and determining the activation level of pseudo-autistic
  55. An Automated Platform for Surface Plasmon Resonance-Based Sensors
  56. Multilevel Single-Phase Four-Leg AC-DC-AC Converter
  57. Universal Active Power Filter Based on AC-DC-AC Converter with Six Controlled Switches for Single-Phase Systems
  58. Predicting the Performance of Surface Plasmon Resonance Sensors Based on Anisotropic Substrates
  59. Feedback controller for restoring the basal hemodynamic condition with a rotary blood pump used as left ventricular assist device
  60. Approaches for deep-ultraviolet surface plasmon resonance sensors
  61. Surface Plasmon Resonance Sensing Characteristics of Thin Copper and Gold Films in Aqueous and Gaseous Interfaces
  62. Radiative and Non-radiative Surface Plasmon Resonance: Comparison of Real-Time Sensing Performance
  63. A physiological control system for ECG-synchronized pulsatile pediatric ventricular assist devices
  64. Data-Driven Sensitivity Coefficients Estimation for Cooperative Control of PV Inverters
  65. Combining Model-Based and Extremum Seeking Control for Fast Tracking the Maximum Power Point of Lundell Alternator
  66. A mixed-radix FFT algorithm implementation based on Petri nets to assist the certification of bio-medical systems
  67. Four-Port AC/DC-DC/AC Dual Active Bridge Based Converter
  68. Ion-specific quantitative measurement scheme using transit-time surface plasmon resonance
  69. Nonlinear trajectory tracking controller for wheeled mobile robots by using a flexible auxiliary law based on slipping and skidding variations
  70. Parameter estimation of a lead-acid battery model using genetic algorithm
  71. A mathematical model that allows the representation of the regurgitation flow of a prosthetic cardiac valve
  72. Polymer fiber actuators: manufacturing, modeling and application on an antagonistic joint
  73. Projeto automático de controladores para robôs de enxame em diferentes condições de cenário
  74. Heavy Metals
  75. Characterization of a pediatric rotary blood pump
  76. Numerical tool for estimating the dielectric constant, the thickness, and the coverage of immobilized inhomogeneous protein films on gold in aqueous solution
  77. A Distributed Functional Verification Environment for the Design of System-on-Chip in Heterogeneous Architectures
  78. Modeling, characterization and test of a pediatric ventricular assist device
  79. Surface plasmon resonance features of corrugated gold films: wavelength interrogation mode for exhaled gas detection
  80. Enhanced Directed Radiative Surface Plasmon Emission from Periodically Corrugated Noble Metal Films
  81. Comparative evaluation of modulation strategies for a single-phase PV micro-inverter with high-frequency transformer
  82. Environment for integration of distributed heterogeneous computing systems
  83. Shaping control strategies for active power filters
  84. Determining a processor utilization model based on fuzzy c-means clustering
  85. Model-based robotic hand tracking and gripper state determination
  86. Modeling and Temperature Drift Compensation Method for Surface Plasmon Resonance-Based Sensors
  87. Surface Plasmon Resonance Sensing Characteristics of Thin Aluminum Films in Aqueous Solution
  88. A framework for design and validation of face detection systems
  89. Formal modeling of biomedical signal acquisition systems: source of evidence for certification
  90. Leishmania spp. Detection Using a Surface Plasmon Resonance Biosensor
  91. Stereotyped gesture recognition: An analysis between HMM and SVM
  92. Simplified Immuno-assay for Rapid Label-free Dengue Serotype Diagnosis: Suppression of Non-specific Binding Interference
  93. Co-existence of Radiative and Non-Radiative Surface Plasmon Resonance Modes: Power Balance and Influence of Film Morphology
  94. Periodic protein adsorption at the gold/biotin aqueous solution interface: evidence of kinetics with time delay
  95. A new centralized active and reactive power control strategy for voltage regulation in power distribution networks with high penetration of photovoltaic generation
  96. Behavior coordination in multi-robot systems
  97. Controlling the cardiovascular response under synchronized ventricular assist device support
  98. Improved robust current shaping control for shunt active filters
  99. Lifetime estimation technique for lead-acid batteries
  100. Sensorless voltage-current shaping control for universal active filters
  101. A random fault injector for CAN Network
  102. Determining lead-acid battery DC resistance by tremblay battery model
  103. Surface structure determination of black phosphorus using photoelectron diffraction
  104. A Prism-based Polymeric Surface Plasmon Resonance Biochip for Angular and Spectral Modes
  105. Optical Properties and Instrumental Performance of thin Noble Metal (Cu, Au, Ag) Films Near the Surface Plasmon Resonance
  106. Recognition of Affective State for Austist from Stereotyped Gestures
  107. Photovoltaic system with bumpless transfer between grid-connected and stand-alone modes
  108. Polynomial design method for a current controller applied to a single-phase grid-connected VSI with LCL filter
  109. Smart control for active power generation, voltage level and harmonic content based on photovoltaic generators
  110. A Method for Measuring Torque of Squirrel-Cage Induction Motors Without Any Mechanical Sensor
  111. SPR sensor for tampering detection in biofuels
  112. Speed Estimation of an Induction Motor Operating in the Nonstationary Mode by Using Rotor Slot Harmonics
  113. A Robust DC-Link Voltage Control Strategy to Enhance the Performance of Shunt Active Power Filters Without Harmonic Detection Schemes
  114. Surface Plasmon Resonance Sensors
  115. Control of Nonholonomic Mobile Bases Supported by Measuring of the Slipping and Skidding Variations
  116. Design and theoretical analysis of a bidirectional calorimetric flow sensor
  117. Evaluating the signal processing chain employed in surface plasmon resonance biosensing
  118. Implementation of a FPGA-based data acquisition and processing system for image sensors employed in SPR biosensing
  119. Improved data extraction algorithm for biosensors utilizing surface plasmon resonance sensing
  120. Optical properties of thin VO<inf>2</inf>-films at the phase transition: Design aspects for a fiber-optic thermometer
  121. Smartphone based, portable optical biosensor utilizing surface plasmon resonance
  122. Torque estimation using rotor slots harmonics on a three-phase induction motor
  123. Controlling harmonics in electrical power systems for satisfying total and individual harmonic distortion constraints
  124. Designing a low cost high performance permanent magnet motor drive system
  125. Evaluating circuit topologies for battery charge equalization
  126. Visual feedback trajectory planning for object handling and obstacle avoidance
  127. A comparative evaluation of signal injection methods for PMSM self-sensing control
  128. A metric for evaluation of the performance of saliency-tracking self-sensing control of PM motor
  129. Power hardware-in-the-loop (PHIL) based on FPGA
  130. Self-sensing control of PMSM motor for wide-speed range operation
  131. Feasibility of a timeout power management policy
  132. Adsorption, kinetics and biochemical interaction of biotin at the gold–water interface
  133. Combining Model-Based and Heuristic Techniques for Fast Tracking the Maximum-Power Point of Photovoltaic Systems
  134. A Surface Plasmon Resonance Biochip That Operates Both in the Angular and Wavelength Interrogation Modes
  135. Design methodology of a self-priming PMMA valveless piezoelectric micro-pump
  136. Sensitivity of an optical sensor that operates at angular or wavelength interrogation mode
  137. Diffusion Driven Accelerated Stress Corrosion Cracking in an Acrylic Polymer
  138. Cooperative control for active power compensators allocated in distributed networks
  139. Evaluating APLCs placement in a power system based on real-time simulation
  140. A fiber optical thermometer for high power transformer monitoring utilizing the thermo-optical phase transition of VO2
  141. A surface plasmon resonance biosensor for angular and wavelength operation
  142. System identification and energy-aware processor utilization control
  143. The interaction of ozone with bio-fuel, revealed by electrical conduction and infrared spectroscopy
  144. Quasi-Z-source converter topology with energy storage for photovoltaic night lighting systems
  145. Improving energy quality by voltage compensation and active power injection
  146. Estimation of Impulsive Noise in an Electricity Substation
  147. Refined dielectric breakdown model for crystalline organic insulators: electro-thermal instability coupled to interband impact ionization
  148. A method for determining the mutual diffusion coefficient of molecular solutes based on surface plasmon resonance sensing
  149. Linear peristaltic pump driven by three magnetic actuators: Simulation and experimental results
  150. An Effective Induction Motor Control for Photovoltaic Pumping
  151. Photovoltaic lighting system based on Z-source/quasi-Z-source converter topology
  152. Multisize Sliding Window in Workload Estimation for Dynamic Power Management
  153. Cooperative filters: Localization and injected current control
  154. A simple and effective control strategy for improved operation of a current-fed push-pull converter
  155. Automatic timed automata extraction from ladder programs for model-based analysis of control systems
  156. An electro-thermal approach to dielectric breakdown in solids: application to crystalline polymer insulators
  157. Line Shape Analysis and Extended Instrumental Operation of Surface Plasmon Resonance Sensors
  158. Comparison of HF signal injection methods for sensorless control of PM synchronous motors
  159. Lead-acid battery modeling and state of charge monitoring
  160. Performance analysis of a self-excited induction generator under nonlinear loads used harmonic suppression methods
  161. An Evaluation of Alternative Techniques for Monitoring Insulator Pollution
  162. Exchangeable low cost polymer biosensor chip for surface plasmon resonance spectroscopy
  163. Molecular transport and mutual diffusion measurement method in a micro-fluidic system, based on surface plasmon resonance spectroscopy
  164. Fault detection and diagnosis for stand alone system based on induction generator
  165. Modeling and analysis of six-phase induction machine under fault condition
  166. Voltage regulation and harmonic suppression of a self-excited induction generator under nonlinear loads
  167. Using hierarchical coloured petri net to support substation restoration
  168. A mathematical model for the strain–temperature hysteresis of shape memory alloy actuators
  169. Non-Invasive Fast Detection of Internal Fouling Layers in Tubes and Ducts by Acoustic Vibration Analysis
  170. On the automatic generation of timed automata models from Function Block Diagrams for safety instrumented systems
  171. MaeRobot: An Open Source Test Platform for Prototyping Robots
  172. Dynamic Power Management with Scheduled Switching Modes
  173. Temperature-dependent sensitivity of surface plasmon resonance sensors at the gold–water interface
  174. Figures of merit and optimization of a <inline-formula><math display="inline" overflow="scroll"><mrow><mi mathvariant="normal">V</mi><msub><mi mathvariant="normal">O</mi><mn>2</mn></msub>...
  175. A four leg voltage source converter based dynamic voltage restorer
  176. Closed-loop control of a dynamic voltage restorer based on a 4-leg voltage source converter
  177. Fouling detection based on analysis of ultrasonic guided waves using wavelet transform
  178. Modeling and simulation of Systems of Multiple Sources of Energy by Differential Hybrid Petri Nets
  179. Comparative Analysis and Numerical Simulation of the Macro-mechanical Models of Shape Memory Alloy
  180. Influence of temperature effects on sensitivity of surface plasmon resonance sensors
  181. Vibration analysis for fouling detection using hammer impact test and finite element simulation
  182. Reduced Switch Count Multiple Three-Phase AC Machine Drive Systems
  183. Sensorless induction motor drive for photovoltaic pumping applications
  184. A Fast and Memory Efficient Huffman Decoding Method for the MPEG-4 AAC Standard
  185. Exploring the Switching Energy Effect in a Dynamic Power Management Technique for Wireless Sensor Networks
  186. Dynamic Power Management with Scheduled Switching Modes in Wireless Sensor Networks
  187. Optical monitoring of micro fluidic flow conditions, employing surface plasmon resonance sensing
  188. On the automatic generation of timed automata models from ISA 5.2 diagrams
  189. Short-Circuit Fault Mitigation in Six-Phase Induction Machine Drives
  190. DC-Link Three-Phase-to-Three-Phase Four-Leg Converters
  191. Improved Dead-Time Compensation for Sinusoidal PWM Inverters Operating at High Switching Frequencies
  192. Fouling Detection based on Vibration Analysis with the Hammer Impact Test
  193. Transient response analysis and modeling of near wall flow conditions in a micro channel: evidence of slip flow
  194. Parameter and Speed Estimation for Implementing Low Speed Sensorless PMSM Drive System Based on an Algebraic Method
  195. Bounded-distance multi-coverage backbones in wireless sensor networks
  196. Computer Aided Thought Process for Robust PMSM Control
  197. Design of robust PID controllers for PMSM drive with uncertain load parameter
  198. Using the model of the solar cell for determining the maximum power point of photovoltaic systems
  199. A General PWM Strategy for Four-Switch Three-Phase Inverters
  200. A New Approach for Inter-Turn Short-Circuit Detection in Six-Phase Induction Motor
  201. Sensorless Control of a PMSM Synchronous Motor at Low Speed
  202. Reduced Switch Count DC-Link AC–AC Five-Leg Converter
  203. A simplified induction machine model to study rotor broken bar effects and for detection
  204. Photovoltaic properties and technological aspects of In1−xGaxN/Si, Ge (0
  205. dc-Sheet resistance as sensitive monitoring tool of protein immobilization on thin metal films
  206. Optical properties and instrumental performance of thin gold films near the surface plasmon resonance
  207. 3E-5 Wavelet-Based Method for Fouling Detection Using Ultrasonic Guided Waves
  208. Modeling and analyzing power consumption in sensor networks nodes based on differential hybrid Petri nets
  209. AC Drive Systems Using Five-Leg Converter and Series-Connected Machines
  210. Reduced Switch Count Dual-Winding AC Drive Systems
  211. Modeling and performance of vanadium–oxide transition edge microbolometers
  212. Vector control strategies for single-phase induction motor drive systems
  213. Fault-Tolerant Voltage-Fed PWM Inverter AC Motor Drive Systems
  214. Online Estimation of the Stator Resistance and Leakage Inductance of a Four-Phase Induction Machine Drive
  215. Formal verification and controller redesign of power electronic converters
  216. AC motor drive systems with a reduced-switch-count converter
  217. Fault-tolerant reversible ac motor drive system
  218. Fault detection of open-switch damage in voltage-fed PWM motor drive systems
  219. Limiting loop proximity hysteresis model
  220. Modeling of the hysteretic metal-insulator transition in a vanadium dioxide infrared detector
  221. A new approach for the simulation of power electronic circuits
  222. Effects of electrothermal feedback on operation of high-Tc superconducting transition edge bolometers
  223. A three-leg voltage source inverter for two-phase AC motor drive systems
  224. Reducing losses in three-phase PWM pulsed DC-link voltage-type inverter systems
  225. Estimating the parameters of induction machines at standstill
  226. Stability conditions, nonlinear dynamics, and thermal runaway in microbolometers
  227. Current control of unbalanced electrical systems
  228. Digital scalar pulse-width modulation: a simple approach to introduce nonsinusoidal modulating waveforms
  229. Modeling a magnetostrictive transducer using genetic algorithm
  230. Optimization strategy for a small-scale reverse osmosis water desalination system based on solar energy
  231. Modeling and control of unbalanced three-phase systems containing PWM converters
  232. A hysteresis model for a vanadium dioxide transition-edge microbolometer
  233. An induction motor drive system with improved fault tolerance
  234. Thermal dynamics of VO2 films within the metal–insulator transition: Evidence for chaos near percolation threshold
  235. On-line estimation of the stator resistance of induction machines based on zero-sequence model
  236. Nonlinearity and electrothermal feedback of high Tc transition edge bolometers
  237. Characterization of a trajectory recognition optical sensor for an automated guided vehicle
  238. Real-time estimation of the electric parameters of an induction machine using sinusoidal PWM voltage waveforms
  239. Rotor-flux-oriented control of a single-phase induction motor drive
  240. Control of unbalanced three-phase power electronic systems
  241. Induction motor drive system for low-power applications
  242. Linear parameter estimation for induction machines considering the operating conditions
  243. Methodology for simulating the response of nonlinear power circuits
  244. Parameter estimation of induction machines under sinusoidal PWM excitation
  245. Single-phase induction motor drives systems
  246. Dynamic Response of a Feedback Thermoresistive Electrical Substitution Pyranometer
  247. A feedback I/sup 2/-controlled constant temperature solar radiation meter
  248. Current control for induction motor drives using random PWM
  249. Reducing cogging torque in interior permanent magnet machines without skewing
  250. Compensation of Self-Heating in the Measurement of the Dynamic Response of a Thermoresistive Sensor
  251. Parameter sensitivity of MRAC models employed in IFO-controlled AC motor drive
  252. On a pole placement iterative design scheme
  253. Corrections to "Thermoresistive Radiatian Sensor Response Time Employing Electrical Heating"
  254. Thermoresistive radiation sensor response time employing electrical heating
  255. Identification of thermoresistive solar radiation sensors
  256. Avaliação do processo de atendimento a pacientes portadores de doença crônico-degenerativa em uma unidade básica de saúde
  257. Dynamic response of thermoresistive sensors
  258. dc amplifier with auto-zeroing of thermal drift
  259. Dual AC Drives with Five-Leg Converter
  260. Reconfigurable Fault Tolerant Dual-Winding AC Motor Drive System
  261. Sensorless Control Strategies for Single-Phase Induction Motor Drive System
  262. Startup and Fault Tolerance of the SRM Drive with Three-Phase Bridge Inverter
  263. Disturbance-free operation of a six-phase ac motor drive system
  264. Elimination of the current tail effect in the SRM drive with a three phase bridge
  265. Fault tolerant control of five-phase AC motor drive
  266. Self-compensation of unbalancing for induction motors drive system based on a quasi time-invariant model
  267. Component minimized drive systems for multi-machine applications
  268. Characterization of induction machines with a genetic algorithm
  269. Estimating the parameters of induction machines at standstill
  270. Parameter estimation of induction machines under sinusoidal excitation
  271. Experimental determination of the time constant of a thermoresistive sensor
  272. Linear parameter estimation of an induction machine
  273. Restricted adaptation of simple controllers
  274. Current control for induction motor drives based on input-output dynamic discrete model
  275. A SISO Strategy to Control an AGV
  276. A model of double star induction motors under rotor bar defect for diagnosis purpose
  277. AC-AC single-phase to single-phase two-leg converters
  278. Common-mode voltage reduction in a reduced-switch induction motor drive system
  279. Indirect field-oriented control of an induction motor by using closed-loop identification
  280. Random Space Vector Modulation for 3-Level Power Inverter-fed Drive Systems with Current Control
  281. Reduced switch count dual-winding ac drive system with common-mode voltage mitigation
  282. A modified load commutated inverter-fed induction motor drive system
  283. A multi-function power quality utility for connecting co-generation systems to the power mains
  284. A suitable control strategy for integrating an active power filter and a VAR compensator operating under unbalanced conditions of the power mains
  285. Estimating the parameters of an induction motor in open-loop and closed-loop operation
  286. A hysteresis model for a VO/sub 2/ variable optical attenuator
  287. Compensation strategies in the PWM-VSI topology for a fault tolerant induction motor drive system
  288. Dead-time compensation in the zero-crossing current region
  289. Parameter estimation of induction machines by using its steady-state model and transfer function
  290. Parameters estimation of induction motor using subspace methods
  291. Six-phase AC drive system with reduced common-mode voltage
  292. Vector and scalar modulation for six-phase voltage source inverters
  293. A nonstandard control strategy for active power filters for unbalanced conditions of the power mains
  294. Adjustable-speed single-phase induction motor drive
  295. Component minimized single-phase converters for multiple single-phase loads
  296. Indirect field orientation for induction motors without speed sensor
  297. Nonlinear inverse filtering for measurement of thermal hysteresis
  298. On-line estimation of the stator resistance and leakage inductance of a four-phase induction machine drive
  299. On-line estimation of the stator resistance of a six-phase induction machine
  300. Two fault tolerant control strategies for shunt active power filter systems
  301. Varying the switching frequency to compensate the dead-time in pulse width modulated voltage source inverters
  302. A fault tolerant induction motor drive system by using a compensation strategy on the PWM-VSI topology
  303. A gain-scheduling PID-like controller for Peltier-based thermal hysteresis characterization platform
  304. A reduced switch count three-phase AC motor drive
  305. A space vector PWM method for three-level flying-capacitor inverters
  306. A strategy for improving reliability of motor drive systems using a four-leg three-phase converter
  307. AC motor drive systems with a reduced switch count converter
  308. AC/AC converters with a reduced number of switches
  309. An optimum double correlated sampling technique for infrared radiation detection
  310. Control of a three-phase four-wire active filter operating with an open phase
  311. Eliminating the common-mode voltage in AC drive systems using a four-phase machine
  312. Fault tolerant reversible AC motor drive system
  313. Improved fault tolerance of active power filter system
  314. Instability and dynamics of thermal runaway of thermoresistive microsensors
  315. A hysteresis model for vanadium oxide thermal radiation sensor
  316. A simple indirect field oriented control of induction machines without speed measurement
  317. An algebraic PWM method for three-level voltage source inverters
  318. Digital current control of unbalanced three-phase power electronic systems
  319. Fault detection in voltage-fed PWM motor drive systems
  320. Quasi time-invariant parameter modeling and control of unbalanced induction machines
  321. Reducing losses in three-phase PWM pulsed DC-link voltage-type inverters
  322. A new method for estimating all the electrical parameters of induction machines
  323. Characterization of a neural network-based trajectory recognition optical sensor for an automated guided vehicle
  324. Field oriented control of a single-phase induction motor drive
  325. PWM current controllers in the synchronous and stationary reference frame with different sampling and converter switching frequencies
  326. Pulse width modulator for voltage-type inverters with either constant or pulsed DC link
  327. Current control for a random PWM voltage source inverter
  328. Enhanced PWM voltage waveform and dead time compensation for AC drive systems
  329. Flux and torque control of an induction machine using linear discrete state space approach
  330. Induction motor drive system for low power applications
  331. PWM space vector based in digital scalar modulation
  332. Real-time estimation of the electrical parameters of an induction machine using sinusoidal PWM voltage waveforms
  333. The influence of the slip and the speed in the parameter estimation of induction machines
  334. AC/AC converter with four switch three phase structures
  335. Induction generator static systems with a reduced number of components
  336. MRAC strategies for an IFO controlled AC motor drive with parameter estimation
  337. Dynamic estimation of the induction machine parameters and speed
  338. Vector and scalar control of a four switch three phase inverter
  339. Parameter estimation models for induction machines
  340. Vector control in synchronous machine drives