All Stories

  1. Chitosan nanoparticles’ functionality as redox active drugs through cytotoxicity, radical scavenging and cellular behaviour
  2. Compact Lens-less Digital Holographic Microscope for MEMS Inspection and Characterization
  3. d’Nanoimager and d’Holoscope - A Comparative Study for MEMS Metrology
  4. Damage monitoring using fiber optic sensors and by analysing electro-mechanical admittance signatures obtained from piezo sensor
  5. Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective
  6. Front Matter: Volume 9524
  7. Digital off-axis holography with angular multiplexing and synthetic aperture
  8. Phase shift reflectometry for wafer inspection
  9. Three-dimensional imaging of microstructures by an improved compact digital holographic microscope (ICDHM) with dual wavelength
  10. Wavefront subaperture stitching with Shack-Hartmann sensor
  11. Efficient design of Fiber Optic Polarimetric Sensors for crack location and sizing
  12. Fibre optic sensors for load-displacement measurements and comparisons to piezo sensor based electromechanical admittance signatures
  13. Shape reconstruction from gradient data in an arbitrarily-shaped aperture by iterative discrete cosine transforms in Southwell configuration
  14. Phase retrieval in arbitrarily shaped aperture with the transport-of-intensity equation
  15. FBG and FOPS for local and global structural health monitoring on a single fiber
  16. A new phase error compensation method in digital holographic microscopy
  17. Phase errors elimination in compact digital holoscope (CDH) based on a reasonable mathematical model
  18. Silicon wafer microstructure imaging using InfraRed Transport of Intensity Equation
  19. Birefringence characterization of injection molded microplates
  20. Failure assessment of aluminum liner based filament-wound hybrid riser subjected to internal hydrostatic pressure
  21. Capability enhancement in compact digital holographic microscopy
  22. Fibre Bragg grating sensors for in-situ measurement of resin pressure in curing composites
  23. The phase error reduction using window functions in digital holography
  24. A new autofocus method based on angular spectrum method in digital holography
  25. Microstructure measurement of digital holography
  26. Phase-space analysis of transport of intensity equation under partially coherent illumination
  27. Comparison of two-dimensional integration methods for shape reconstruction from gradient data
  28. Transport of intensity equation: a new approach to phase and light field
  29. Comparison of Image Processing Methods for the Detection of Particle from Digital Hologram
  30. 4f amplified in-line compressive holography
  31. Integrated real-time monitoring system for strain/temperature distribution based on simultaneous wavelength and time division multiplexing technique
  32. Boundary-artifact-free phase retrieval with the transport of intensity equation II: applications to microlens characterization
  33. Phase discrepancy analysis and compensation for fast Fourier transform based solution of the transport of intensity equation
  34. Phase space representation of transport of intensity phase retrieval for partially coherent fields
  35. New developments in transport of intensity equation for phase retrieval and computational imaging
  36. Front Matter: Volume 9132
  37. Optical frequency comb profilometry using a single-pixel camera
  38. Digital holography to light field
  39. Boundary-artifact-free phase retrieval with the transport of intensity equation: fast solution with use of discrete cosine transform
  40. Effect of particle concentration and turbidity on particle characterization using digital holography
  41. Light field moment imaging: comment
  42. Comparison of Digital Holography and Transport of Intensity for Quantitative Phase Contrast Imaging
  43. System and Method for Cylindrical Error Measurement with Interferometry
  44. Phase retrieval and computational imaging with the transport of intensity equation: boundary conditions, fast solution, and discrepancy compensation
  45. Direct continuous phase demodulation in digital holography with use of the transport-of-intensity equation
  46. Small diameter fiber Bragg gratings and applications
  47. High-speed transport-of-intensity phase microscopy with an electrically tunable lens
  48. Noninterferometric single-shot quantitative phase microscopy
  49. Measurement of Two-Dimensional Crystal Shape Using Digital Holography
  50. Flexible camera calibration using not-measured imperfect target
  51. Framework for gradient integration by combining radial basis functions method and least-squares method
  52. Effect of the location and size of a single crack on first fundamental frequency of a cantilever beam using fiber optic polarimetric sensors and characterisation of FBG sensors
  53. Front Matter: Volume 8769
  54. Quantitative phase from defocused intensity by image deconvolution
  55. Single-shot quantitative phase microscopy with the transport-of-intensity equation
  56. Digital holography display (3)
  57. Specular 3D shape measurement with a compact fringe reflection system
  58. Dual wavelength digital holography for improving the measurement accuracy
  59. 4D metrology of flapping-wing micro air vehicle based on fringe projection
  60. Physical phase compensation in digital holographic microscopy by using of electrical tunable lens
  61. Investigation of surface and subsurface profile, techniques of measurement, and replication of the Chinese Magic Mirror
  62. Weighing of moving vehicles using fiber optic polarimetric sensor
  63. Phase aberration compensation in digital holographic microscopy based on principal component analysis
  64. Camera calibration with active phase target: improvement on feature detection and optimization
  65. Impact of charge-coupled device size on axial measurement error in digital holographic system
  66. Polarization modulation study of transmissive liquid crystal spatial light modulator using digital holographic polariscope
  67. Compound common-path digital holographic microscope
  68. Transport-of-intensity phase imaging using Savitzky-Golay differentiation filter - theory and applications
  69. Effect of injection-molding-induced residual stress on microchannel deformation irregularity during thermal bonding
  70. Real-time three-dimensional infrared imaging using fringe projection prof ilometry
  71. Phase shift reflectometry for sub-surface defect detection
  72. Compact digital holoscope with dual wavelength
  73. Improvement of least-squares integration method with iterative compensations in fringe reflectometry
  74. Calibration of the DOE lens array based multipoint diffraction strain sensor
  75. Investigation of cell morphology by the TRUImagE digital holographic microscopy system
  76. Phase retrieval from reflective fringe patterns of double-sided transparent objects
  77. A four-camera videogrammetric system for 3-D motion measurement of deformable object
  78. Fluorescence Enhancement Using Silver Nanotriangle Arrays
  79. Improvement of least squares integration method with iterative compensation for shape reconstruction from gradient
  80. Computer-generated kinoforms of real-existing full-color 3D objects using pure-phase look-up-table method
  81. Fast full-field out-of-plane deformation measurement using fringe reflectometry
  82. Mueller–Stokes polarimetric characterization of transmissive liquid crystal spatial light modulator
  83. Physical spherical phase compensation in reflection digital holographic microscopy
  84. Studies on aperture synthesis in digital Fresnel holography
  85. Genetic algorithm-support vector regression for high reliability SHM system based on FBG sensor network
  86. Effect of residual stresses in injection molded cyclic olefin copolymer during microfabrication: hot embossing as well as thermal bonding
  87. Studies on Digital Holographic Tomography
  88. Quality-guided phase unwrapping technique: comparison of quality maps and guiding strategies
  89. Nanosphere Templated Metallic Grating Assisted Enhanced Fluorescence
  90. Rapid defect detections of bonded wafer using near infrared polariscope
  91. Study on three-dimensional shape measurement of partially diffuse and specular reflective surfaces with fringe projection technique and fringe reflection technique
  92. Whole field curvature and residual stress determination of silicon wafers by reflectometry
  93. Digital Holography for MEMS and Microsystem Metrology
  94. Conclusion
  95. Digital Reflection Holography and Applications
  96. Introduction
  97. Large field-of-view deformation measurement for transmission tower based on close-range photogrammetry
  98. Practical Framework for Phase Retrieval and Invalidity Identification with Temporal Phase Unwrapping Method in Fringe Projection Profilometry
  99. Dynamic three-dimensional sensing for specular surface with monoscopic fringe reflectometry
  100. Accurate size measurement of needle-shaped particles using digital holography
  101. Tunable optofluidic aperture configured by a liquid-core/liquid-cladding structure
  102. Full-field phase modulation characterization of liquid-crystal spatial light modulator using digital holography
  103. Profilometry fringe-phase-retrieval methods
  104. Disposable flow cytometer with high efficiency in particle counting and sizing using an optofluidic lens
  105. Characterization and inspection of microlens array by single cube beam splitter microscopy
  106. Phase invalidity identification framework with the temporal phase unwrapping method
  107. A new methodology for pixel size retention in lensless digital holographic microscopy applied to micro-particle analysis
  108. Resolution analysis of a digital holography system
  109. Imaging mechanisms analysis of compact digital holographic microscope for microparticles measurement
  110. An accurate 3D inspection system using heterodyne multiple frequency phase-shifting algorithm
  111. Calibration of Pizeo Rotation Nano-positioning Stage by Digital Holography System
  112. Characterization of dual-periodic structures with optical scattering
  113. Characterization of Piezo rotation stage by multipoint diffraction strain sensor
  114. Design and characterization of DOE micro lens array for spatial light modulator
  115. Digital Holography Display (2)
  116. Dynamic Stress Concentration – a Hybrid Analysis
  117. 用基于种子点的三维图像相关法测量连续大变形
  118. Preface
  119. Three-dimensional quantitative phase measurement by Common-path Digital Holographic Microscopy
  120. Warpage Measurement of Thin Wafers by Reflectometry
  121. Resolution Analysis of In-line Digital Holography
  122. Dynamic 3D Measurement for Specular Reflecting Surface with Monoscopic Fringe Reflectometry
  123. An accurate stereo vision system using cross-shaped target self-calibration method based on photogrammetry
  124. Recording and reconstruction of digital Gabor hologram
  125. Microlens characterization by digital holographic microscopy with physical spherical phase compensation
  126. Fault-Tolerant Characterization of Phase Objects Using a Speckle-Based Phase Retrieval Technique
  127. Comparison of two-­dimensional phase retrieval methods from single interference fringe pattern
  128. Multi-functional, optofluidic, in-plane, bi-concave lens: tuning light beam from focused to divergent
  129. Effect of Hydration on the Strain Gradients in Dental Hard Tissues after Heat and Cold Application
  130. Full-field TN-LCSLM phase modulation characterization using digital holography
  131. Stress measurement of thin wafer using reflection grating method
  132. Quasi-physical phase compensation in digital holographic microscopy: errata
  133. Characterization and inspection of micro-lens array by SCBS microscope
  134. Digital reflection holography based systems development for MEMS testing
  135. A tuneable micro-optofluidic biconvex lens with mathematically predictable focal length
  136. Least-squares calibration method for fringe projection profilometry considering camera lens distortion
  137. Comparison of Fourier transform, windowed Fourier transform, and wavelet transform methods for phase extraction from a single fringe pattern in fringe projection profilometry
  138. Tunable micro-optofluidic prism based on liquid-core liquid-cladding configuration
  139. Metal enhanced fluorescence on silver nano-triangles
  140. Microparticle characterization using digital holography
  141. Challenges of digital holography in micro-optical measurement
  142. Compact fringe projection profilometer
  143. Compact handheld digital holographic microscopy system development
  144. Curvature measurement system of Si-wafer using circular gratings
  145. Defect inspections using infrared phase shift field polariscope
  146. Digital holographic display
  147. Digital in-line holographic microscopy at 1310 nm with superluminescent light-emitting diode broadband source
  148. Dynamic imaging of micro-particles in 3D using lensless in-line digital holographic microscopy
  149. Fabrication and characterization of mono-layered polystyrene beads using nanosphere lithography (NSL) for metal-enhanced fluorescence (MEF)
  150. Fiber Bragg grating sensor multiplexing system based on the time- and wavelength- division technique
  151. Least-squares phase-height mapping for fringe projection profilometry considering camera lens distortion
  152. Method for compensation of transverse dispersion in electro-holography
  153. Non-contact dynamic displacement and vibration measuring technology using laser Doppler vibrometer
  154. Physical phase compensation in digital holographic microscopy
  155. Quantitative analysis of live cells using digital holographic microscopy
  156. Tunable-microlens-based multipoint diffraction strain sensor
  157. Twisted nematic liquid crystal cell characterization using rotating polarizers including full-field cell gap thickness measurement
  158. Biconcave micro-optofluidic lens with low-refractive-index liquids
  159. Thermo-mechanical characterization of surface-micromachined microheaters using in-line digital holography
  160. A novel time-division multiplexing fiber Bragg grating sensor interrogator for structural health monitoring
  161. Phase-shifting in-line digital holography on a digital micro-mirror device
  162. Quasi-physical phase compensation in digital holographic microscopy
  163. Compact digital holographic microscopes and application
  164. Of light, of MEMS: Optical MEMS in telecommunications and beyond
  165. A novel fiber Bragg grating sensor interrogator based on time division multiplexing technique
  166. Effectively tunable dispersion compensation based on chirped fiber Bragg gratings using electroactive polymer
  167. A micro optofluidic lens with short focal length
  168. Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements
  169. Transmission digital holographic microscopy based on a beam-splitter cube interferometer
  170. Effect of polarization on symmetry of focal spot of a plasmonic lens
  171. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
  172. Digital holographic microscopy with physical phase compensation
  173. Three dimensional digital holographic profiling of micro-fibers
  174. Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry
  175. Deformation and shape measurement using multiple wavelength microscopic TV holography
  176. Measurement of coefficient of thermal expansion of films using digital image correlation method
  177. Study on aberration suppressing methods in digital micro-holography
  178. Optical alignment of a cylindrical object
  179. Modelling and optimization of micro optofluidic lenses
  180. Modeling and Characterization of Micro Optofluidic Lenses With Short Focal Length
  181. 用于MEMS动态计量的同轴数字全息术
  182. Digital Holography for MEMS Application
  183. Links between regularized phase tracking/windowed Fourier ridges for fringe pattern analysis and digital image correlation
  184. On errors of digital image correlation due to speckle patterns
  185. Phase reconstruction of living human embryonic kidney 293 cells based on two off-axis holograms
  186. Time division multiplexing of FBG sensor system
  187. Strain and tilt measurement using multi-point diffraction strain sensor
  188. Improved speckle projection profilometry for out-of-plane shape measurement
  189. A multipoint diffraction strain sensor using micro-lens array: review on variable sensitivity
  190. Adaptive confocal system for 3-D profiling
  191. Characterisation of laser marks using digital holographic microscopy
  192. Comparison of digital holographic microscope and confocal microscope methods for characterization of micro-optical diffractive components
  193. Deformation analysis on micro objects using multiple wavelength microscopic TV holography
  194. Microlens testing: an application
  195. On-line digital holographic measurement of size and shape of microparticles for crystallization processes
  196. Phase measurement via in-line digital holographic microscopy
  197. Phase shift polarimetry for non-invasive detection of laser-induced damage
  198. Processing of digital holograms for size measurements of microparticlese
  199. Reduction of speckle noise by multi-kinoforms in holographic three-dimensional display
  200. Residual stress in silicon wafer using IR polariscope
  201. Structure measurement of phase grating on post-magnification digital micro-holography
  202. Surface measurement with Shack-Hartmann wavefront sensing technology
  203. Whole field residual stress measurement using computer aided reflection grating
  204. Microscopic TV holography for MEMS deflection and 3-D surface profile characterization
  205. Full-field retardation measurement of a liquid crystal cell with a phase shift polariscope
  206. A whole-field polariscope using a liquid crystal polarization rotator
  207. Signature Optical Cues: Emerging Technologies for Monitoring Plant Health
  208. Measurement accuracy of lateral-effect position-sensitive devices in presence of stray illumination noise
  209. A dynamic three-dimensional display technique based on liquid crystal spatial light modulator
  210. A multipoint diffraction strain sensor using a micro-lens array: from theory to application
  211. Characterization of MEMS cantilevers using lensless digital holographic microscope
  212. Full-field analysis of a liquid crystal cell using a low birefringence polariscope
  213. Study of the holographic phase stitching technique
  214. Development of a simple user-friendly commercial digital holographic microscope
  215. Defocus measurement for random self-affine fractal surfaces
  216. CrossRef Listing of Deleted DOIs
  217. Dynamic characterization of MEMS diaphragm using time averaged in-line digital holography
  218. Warpage of thin wafers using computer aided reflection moire method
  219. Optical Spectroscopic Approach for Non-Invasive Monitoring of Plant Water and Nutrient Stress
  220. Slab-viewing in turbid water by underwater lidar imaging (UWLI)
  221. Double exposure time-averaged in-line digital holography
  222. Phase measurement errors due to holographic interferograms compression
  223. Optical fluorescence biosensor for plant water stress detection
  224. Multipoint diffraction strain sensor with variable sensitivity
  225. Shape detection using light line and Bezier approximation network
  226. Whole-field optical strain sensor using a microlens array
  227. Fundamentals And Applications Of Biophotonics In Dentistry
  228. PHOTOMECHANICS
  229. Characterization of Multipoint Diffraction Strain Sensor (MISS)
  230. Characterization of multipoint diffraction strain and tilt sensor based on moiré interferometer and multichannel imaging position-sensitive detector
  231. Pre-visual detection of iron and phosphorus deficiency by transformed reflectance spectra
  232. Advances in dynamic metrology using in-line digital holographic interferometry
  233. Investigation of inherent wafer defects using reflection grating technique
  234. Multipoint diffraction strain sensor: an add-on to moire interferometer
  235. Amplitude and phase analysis in digital dynamic holography
  236. Multipoint diffraction strain sensor: theory and results
  237. Generalized three-dimensional windowed Fourier transform for fringe analysis
  238. Performance analysis of all-fiber polarimetric strain sensor for composites structural health monitoring
  239. Misalignment of the optical fibers in multi-channel V-grooves
  240. Digital in-line holography for dynamic micrometrology
  241. Fabrication technique of nanograting using AFM
  242. Time-averaged in-line digital holographic interferometry for vibration analysis
  243. Fiber misalignment in silicon V-groove based optical modules
  244. Digital moiré interferometric investigations on the deformation gradients of enamel and dentine: An insight into non-carious cervical lesions
  245. Efficient implementation of a spatial light modulator as a diffractive optical microlens array in a digital Shack-Hartmann wavefront sensor
  246. Optical sensors enhance plant nutrient monitoring
  247. Characterization of Multipoint Diffraction Strain Sensor (MISS)
  248. Vibration Analysis of Membrane by Time Average In-Line Digital Holographic Interferometry
  249. Sectioning of amplitude images in digital holography
  250. Early detection of calcium deficiency in plants using red edge position
  251. A simple phase unwrapping approach based on filtering by windowed Fourier transform
  252. Amplitude contrast image enhancement in digital holography for particles analysis
  253. Effect of humidity on optical fiber-adhesive bonding
  254. Fault detection by interferometric fringe pattern analysis using windowed Fourier transform
  255. Development of fiber optic spectroscopy for detection of genetically modified plants (Invited Paper)
  256. Photomechanical studies on non-carious-cervical-lesions of the teeth (Invited Paper)
  257. A compact remote controlled interferometer for photomechanics applications
  258. Comparative study of all optical fibers in different smart structures and non-destructive evaluation
  259. Determination of phase-shift from two fringe patterns using windowed Fourier ridges
  260. Laser interferometry method for measuring displacement field of crack tip of bimetal hot-dip specimen
  261. Moire interferometric investigation on the role of hydration in the mechanical behavior of dentine
  262. Spatially sampling effect on fringe phase-shifting detection
  263. Spectroscopic detection of fluorescent protein marker gene activity in genetically modified plants
  264. Uncertainty principle and fringe image processing
  265. Use of reflectance spectroscopy for early detection of calcium deficiency in plants
  266. Optical coupling efficiency studies of passively aligned CWDM optical modules
  267. Recognition of a light line pattern by Hu moments for 3-D reconstruction of a rotated object
  268. A phase-shifting technique for Jamin laser interferometry
  269. High-power efficient continuous-wave TEM_00 intracavity frequency-doubled diode-pumped Nd:YLF laser
  270. Effects of thermally induced optical fiber shifts in V-groove arrays for optical MEMS
  271. Experimental investigation on the role of water in the mechanical behavior of structural dentine
  272. Highly efficient high-repetition-rate tunable all-solid-state optical parametric oscillator
  273. Imaging analysis of digital holography
  274. Optical Fiber Shifts and Shear Stains in V-Groove Arrays for Optical MEMS Packaging
  275. Photomechanical investigations on the stress-strain relationship in dentine macrostructure
  276. Thermal lensing effects for diode-end-pumped Nd:YVO4 and Nd:YAG lasers
  277. Vibration measurement with a micromachined mirror in a very-short external cavity laser
  278. Calibration of phase shift from two fringe patterns
  279. An approach to the coupling effect between torsion and bending for electrostatic torsional micromirrors
  280. Numerical and experimental study diode-pumped Nd:YVO 4 laser with undoped end cap
  281. Optical techniques to understand biofunctional adaptation in human dentine
  282. Application on multichannel V-groove inspection
  283. A plastic fiber polarimetric sensor for dynamic applications
  284. Hybrid analysis of micromachined silicon thin film based on digital microscopic holography
  285. Performance of a multifiber polarimetric strain sensor
  286. A simple phase unwrapping approach using windowed Fourier filtering
  287. Micro optical probe sensor (MOPS) for dynamic in-plane displacement sensing
  288. Optical diffraction strain sensor
  289. Study of high temperature loading on optical fiber-adhesive bonding
  290. Compact broadband tunable short-pulse high-repetition-rate optical parametric oscillator
  291. Automated full-field interferometric characterization of micromachined silicon membrane
  292. A study on residual stresses in polymer composites using moiré interferometry
  293. Observation of the birefringence of intermediate-density gratings
  294. Instantaneous frequency and its application to strain extraction in moire interferometry
  295. Smoothing filters in phase-shifting interferometry
  296. Fiber optic polarimetric sensor (FOPS) prototype and applications
  297. A fiber-optic-based biosensor to monitor mutans streptococci in saliva
  298. Photonic bandgap crystals: a breakthrough for new-generation integrated optical device
  299. Micro/nano moire methods
  300. A fiber optic biosensor (FOBS) to monitor mutans streptococci in human saliva
  301. Filtering the complex field in phase shifting interferometry
  302. Phase-shifting windowed Fourier ridges for determination of phase derivatives
  303. Derivative using low frequency carrier fringes
  304. Noise suppression in spatial carrier phase shifting method
  305. Parameters affecting the quality of acquired signals for the global health monitoring of mobile bridges using fiber optic polarimetric sensors
  306. Sensitivity analysis of all fibers in polarimetric fiber optic sensor for structural health monitoring of composites
  307. Algorithm for directly retrieving the phase difference: a generalization
  308. Shape detection of moving objects based on a neural network of a light line
  309. Sampled speckles and applications
  310. Evaluation of binary speckle correlation
  311. Development of Matlab filtering techniques in digital speckle pattern interferometry
  312. Digital speckle pattern interferometric (DSPI) and thermo-graphic investigations on the thermal responds in human teeth
  313. Structural health monitoring of smart composite materials by using EFPI and FBG sensors
  314. Residual interlaminar deformation analysis in the carbon/epoxy composites using micro-moiré interferometry
  315. Digital microholointerferometer: development and validation
  316. Comparative study on thermal effects of diode-pumped Nd:YVO 4 and Nd:YAG lasers
  317. Discretization effects on imaging performance of digital holographic systems
  318. Strain contouring with Gabor filters: filter bank design
  319. Characterizing Young's fringes’ orientation and spacing by Fourier transform and Radon transform
  320. Double-detector-array 3D profile inspection system
  321. Light source fluctuation effect on confocal imaging system
  322. Power scaling of diode-pumped Nd:YVO/sub 4/ lasers
  323. High resolution AFM scanning Moiré method and its application to the micro-deformation in the BGA electronic package
  324. Dynamic photoelasticity using TDI imaging
  325. Development and validation of digital microholo interferometric system for micromechanical testing
  326. Non-destructive evaluation of smart materials by using extrinsic Fabry–Perot interferometric and fiber Bragg grating sensors
  327. Strain contouring using Gabor filters: principle and algorithm
  328. Strain contouring using Gabor filters: filter bank design
  329. Thermal deformation of electronic package using scanning moire method with high-resolution microscopy
  330. Grating-based real-time polarization phase-shifting interferometry: error analysis
  331. A novel curvature fringe extraction method from speckle slope fringes
  332. Diffraction image in an optical microscope: application to detection of birefringence
  333. Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors
  334. Speckle Methods
  335. MATLAB® for Photomechanics (PMTOOLBOX)
  336. Digital Photoelasticity
  337. NDE of smart structures using multimode fiber optic vibration sensor
  338. Moiré Methods
  339. Photomechanical investigations on post endodontically rehabilitated teeth
  340. High-resolution micromeasurement with digital holography
  341. Comparative study on thermal effects of diode-pumped Nd:YVO4 and Nd:YAG lasers--SUBSCRIPT
  342. Discretization effects on imaging quality of digital holographic systems
  343. Phase-shifting AFM moire method
  344. Strain contouring using Gabor filters
  345. Analysis on the nature of thermally induced deformation in human dentine by electronic speckle pattern interferometry (ESPI)
  346. Hybrid holographic microscope for interferometric measurement of microstructures
  347. Microscopic grid methods—resolution and sensitivity
  348. Multichannel 3D profilometry
  349. Dynamic phase-shift photoelasticity
  350. Fiber Optic Polarimetric Sensor (FOPS) for dynamic applications
  351. Development of fiber optic spectroscopy for in-vitro and in-planta detection of fluorescent proteins
  352. Simultaneous microstress and strain measurement with an optical microscope
  353. Fourier transform method for phase retrieving from fringe patterns with carrier: window selection
  354. High-resolution micro-moire methods: principles and applications
  355. Micro-moire for thermal deformation investigation in electronics packaging
  356. Simple extrashort external-cavity laser self-mixing interferometer for acceleration sensing
  357. Surface inspection using radon transform of projected grating patterns
  358. Tele-shearography for nondestructive evaluation (NDE) of aircraft/composite panels: an analysis
  359. Use of Matlab filtering techniques in digital speckle pattern interferometry
  360. Fiber optic evanescent wave (FOEW) microbial sensor for dental application
  361. Study of parameters affecting the sensitivity of a 3D measurement system using the phase shifting technique
  362. Three-dimensional biofunctional adaptation in human tooth
  363. Modeling of grating/moiré based micro motion sensor
  364. Studies of digital microscopic holography with applications to microstructure testing
  365. Designing and modelling of a grating-based displacement micro-transducer
  366. FMCW reflectometric optical fiber strain sensor
  367. Full field automated photoelasticity using two-load-step method
  368. Dynamic phase-shifting photoelasticity
  369. Double shearography for engineering metrology: optical and digital approach
  370. Diffraction strain sensor for micromeasurements
  371. Dynamic photoelasticity by TDI imaging
  372. FMCW reflectometric optical fiber strain sensor
  373. Inspection of defects in wineglasses using Gabor-filter demodulation method
  374. Measurement of residual stresses in polymer composites using moire interferometry
  375. Photoelastic stress analysis of internal fixation techniques for femur shaft crack
  376. Polarimetric sensors for damage detection of aluminum materials
  377. Thermal deformation measurement of electronic packaging component using AFM scanning moire method
  378. Characterization of microstructures with in-line digital micro-holo-interferometry
  379. Heating measurements in diode-end-pumped Nd:YVO4 lasers
  380. Micro-moire methods: optical and scanning techniques
  381. Noninvasive detection of plant nutrient stress using fiber optic spectrophotometry
  382. Spectroscopy detection of green and red fluorescent proteins in genetically modified plants using a fiber optics system
  383. Evaluation of scaling output power of diode-end-pumped vanadate lasers
  384. Structural health monitoring using a fiber optic polarimetric sensor and a fiber optic curvature sensor - static and dynamic test
  385. Thermal deformation measurement of electronic packages using the atomic force microscope scanning moiré technique
  386. Opto-digital system for curvature measurement
  387. Advanced digital photoelastic investigations on the tooth–bone interface
  388. Investigations of thermal property gradients in the human dentine
  389. Optical strain sensor using median density grating foil: Rivaling the electric strain gauge
  390. Properties of digital holography based on in-line configuration
  391. Criteria for phase reconstruction using Fourier transformation method
  392. Measurement of thermal deformation of IC packages using the AFM scanning moire technique
  393. Discussion on spatial resolution and sensitivity of Fourier transform fringe detection
  394. Micro-opto-mechanical grating switches
  395. Novel full-field automated photoelastic analysis technique
  396. A computer vision system for wineglass defect inspection via Gabor-filter-based texture features
  397. Diffraction strain sensor for micromeasurements
  398. A strain gauge and photoelastic analysis of in vivo strain and in vitro stress distribution in human dental supporting structures
  399. Optical strain sensor using position-sensitive detector and diffraction grating: error analysis
  400. Stress distribution in the dento-alveolar system using digital photoelasticity
  401. Determination of isoclinic and isochromatic parameters using the three-load method
  402. Measurement of Methanol Proportion in Methanol-Gasoline Mixtures - An Application of Fiber Optic Raman Spectroscopy
  403. Effects of different parameters on the performance of a fiber polarimetric sensor for smart structure applications
  404. Micro-measurement using grating microscopy
  405. In-plane deformation measurement using the atomic force microscope moiré method
  406. Sampled-speckle photography for measurement of deformation
  407. Experimental studies on the nature of property gradients in the human dentine
  408. Digital moiré for deformation analysis
  409. Optical Grating Diffraction Method: From Strain Microscope to Strain Gauge
  410. Fiber optic vibration sensor-based smart civil structures
  411. Micro-electro-mechanical fiber optical switches
  412. Comparison of grating structures in optical fibers and integrated optics for MEMS applications
  413. Simultaneous strain and displacement measurements in micromechanics
  414. Fiber optic Raman spectroscopy: an application for the in-situ measurement of water content in methanol
  415. Full-field stress/birefringence analysis with a polarizing microscope
  416. Grid method for strain measurement in electronic packaging using optical, electronic, and atomic force microscope
  417. Mechanical behavior measurement of wood by ESPI method
  418. Optical time-domain reflectometry for distributed sensing of the structural strain and deformation
  419. Development and application of micro-moire interferometer
  420. Detection of cracks in aluminum beams using fiber optic polarimetric sensor
  421. Fiber optic sensor for methane hazards
  422. Portable system approach of monitoring plant nutrient deficiency using fiber optic spectrophotometry
  423. Optical time-domain reflectometry for distributed sensing of the structural strain and deformation
  424. On-line health monitoring of smart composite structures using fiber polarimetric sensor
  425. Phase-shifting method with a normal polariscope
  426. Unified calibration technique and its applications in optical triangular profilometry
  427. Mapping algorithm for 360-deg profilometry with time delayed integration imaging
  428. Active vibration control system of smart structures based on FOS and ER actuator
  429. Polarization phase shifting shearography for optical metrological applications
  430. Optical breakdown laser-generated sound in water
  431. Salt water for optical breakdown laser-generated sound
  432. Digital moire: techniques and applications
  433. Grating diffraction for strain measurement in a microscope
  434. Phase-shifting grating microscope with slab-tilting method for deformation measurement
  435. Fast phase-unwrapping algorithm based on a gray-scale mask and flood fill
  436. TDI imaging—a tool for profilometry and automated visual inspection
  437. Polarimetric sensors for strain measurement and damage detection
  438. White-light speckle method—current trends
  439. Recent advances in photoelastic applications
  440. Micro-optical filter using a polysilicon surface micromachining process
  441. Fiber Optic Sensors for Damage Detection in Composite Materials
  442. Digital drum camera for dynamic recording
  443. Rigid inclusions on the interface between dissimilar anisotropic media
  444. Dynamic photoelasticity using a laser scanner
  445. On rate-dependent plasticity—linear viscoelastic constitutive equations
  446. Fiber optic strain sensor: comparison of HiBi fibers
  447. Peripheral inspection of objects
  448. Novel techniques in reflection moiré
  449. Low-cost digital polariscope for dynamic photoelasticity
  450. 360-deg profilometry: new techniques for display and acquisition
  451. Digital dynamic photoelasticity
  452. Phase shifted projection grid—Effect of pitch and profile
  453. Phase shifting applied to non-sinusoidal intensity distribution—An error simulation
  454. An incremental stress-based constitutive modeling on anisotropic damaged materials
  455. Computer gratings display and applications
  456. Structured-light-assisted CAD/CAM
  457. Computer gratings for vibration analysis
  458. Automated visual inspection of moving objects
  459. Image filtering using 2D fast Hartley transformation
  460. Computer Aided Moiré Methods
  461. Moire methods using computer-generated gratings
  462. Hologram interferometry using PSALM
  463. Logical moiré and its application
  464. Digital enhancement of LCD-based shadow moiré
  465. Damage field and its evolution in a glass-fiber cloth/epoxy composite plate with a central hole
  466. Effect of specimen curvature in moiré interferometry for out-of-plane displacement measurement
  467. Deformations in glass-fiber woven composite using moiré interferometry
  468. CCD Based Moire Interferometric Strain Sensor (MISS)
  469. Moiré interferometry for simultaneous measurement of U, V W
  470. Moire interferometry for out-of-plane displacement measurement around cracks
  471. Moiré interferometry for deformation measurement
  472. Moiré interferometry for vibration analysis of plates
  473. Deformation in adhesive joints using moiré interferometry
  474. Isopachic contouring of opaque plates
  475. Vector representation of Moiré fringes
  476. Separation of 3-D displacement components in the white light speckle method
  477. Measurement of large deformations using the white light speckle method
  478. A white light speckle method applied to the determination of stress intensity factor and displacement field around a crack tip
  479. Introduction to Engineering Mechanics
  480. Metrological Fringe inpainting
  481. Retrieving the instantaneous frequency from images by wavelet ridges
  482. Tunable external-cavity laser using MEMS technology
  483. Thermal deformation measurement of electronic package using advanced moire methods
  484. Fault detection from temporal unusualness in fringe patterns