Contact

All Stories

  1. Drilling CF/PEEK thermoplastic composite: Optimization of drill point angle and cutting parameters using nature-inspired hybrid optimization

    Article • Composites Part B Engineering, August 2026, Elsevier

    Prof. Dr. Alper Uysal

  2. Investigation of the Milling Performance of Different Support Structures Produced by FDM Using Hyper PLA

    Article • July 2026, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  3. Machine Learning-Based Surface Roughness Prediction in Eco-Friendly Milling of AISI 420 Stainless Steel

    Article • İmalat Teknolojileri ve Uygulamaları, April 2026, Manufacturing Technologies and Applications

    Prof. Dr. Alper Uysal

  4. Sustainable Roller Burnishing: Effects on Surface Roughness and Power Consumption in Additively Manufactured AlSi10Mg Alloy

    Article • Key Engineering Materials, February 2026, Trans Tech Publications

    Prof. Dr. Alper Uysal

  5. Evaluation of Flank Wear and Surface Roughness in Nanofluid-Assisted Machining of AISI 430 Ferritic Stainless Steel by FUCA MCDM Method

    Article • January 2026, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  6. Machining performance analysis and optimization in the milling of mold steel under MQL with nanofluid

    Article • Machining Science and Technology, December 2025, Taylor & Francis

    Prof. Dr. Alper Uysal

  7. Synergistic effects of ultrasonic vibration and nanofluid-MQL on surface integrity in sustainable machining of Ti-6Al-7Nb alloy

    Article • CIRP Journal of Manufacturing Science and Technology, December 2025, Elsevier

    Prof. Dr. Alper Uysal

  8. The Effects of MQL Pulse Parameters on Cutting Force, Cutting Temperature and Surface Roughness in Turning Process

    Article • Key Engineering Materials, June 2025, Trans Tech Publications

    Prof. Dr. Alper Uysal

  9. Evaluation of slot milling processes on carbon fiber reinforced polyetheretherketone thermoplastic composite utilizing nanofluid-enhanced minimum quantity lubrication technique

    Article • Journal of Thermoplastic Composite Materials, May 2025, SAGE Publications

    Prof. Dr. Alper Uysal

  10. An Experimental Study on MQL Nozzle Distance and Flow Rate in Slot Milling Operation

    Article • January 2025, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  11. CoCoSo Method-Based Evaluation of Cutting Parameters in Turning of AISI 1040 Steel Under Plain and Nano MoS2 Reinforced Cutting Fluid Assisted MQL Methods

    Article • January 2025, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  12. Investigation on machining of GFRP through ANOVA, DFA, and CoCoSo method combined with Taguchi approach

    Article • Journal of Reinforced Plastics and Composites, March 2024, SAGE Publications

    Prof. Dr. Alper Uysal

  13. Investigation of ultrasonic vibration assisted orthogonal turning under dry and minimum quantity lubrication conditions and performing sustainability analyses

    Article • Journal of Cleaner Production, January 2024, Elsevier

    Prof. Dr. Alper Uysal

  14. Effects of Cutting Parameters on Surface Roughness and Flank Wear in Face Turning of Inconel 718

    Article • January 2024, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  15. Ensuring Tool Run-In When Milling AISI321 Steel in Various Technological Environments

    Article • January 2024, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  16. An Impact of the Cutting Fluid Supply on Contact Processes During Drilling AISI 321 Stainless Steel

    Article • August 2023, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  17. An Impact of the Cutting Fluid Supply on Contact Processes During Drilling

    Article • January 2023, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  18. Surface Roughness Assessment After Milling of Pure and Carbon Black Reinforced Polypropylene Materials

    Article • January 2023, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  19. Dimensional Accuracy of Porous Structures Manufactured Using Air Controller

    Article • September 2022, Springer Science + Business Media

    Erkan Bahçe, Prof. Dr. Alper Uysal

  20. Productıon and Cleaning of Lattice Structures Used in the Space and Aerospace Industry with Metal Additive Manufacturing Method

    Article • Journal of Materials Engineering and Performance, January 2022, Springer Science + Business Media

    Erkan Bahçe, Prof. Dr. Alper Uysal

  21. Ensuring the Quality of Conical Mating Surfaces Processing by Diamond Honing

    Article • January 2022, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  22. Improvement of the MQL Efficiency in Machining Stainless Steel by Adding Nanoparticles to the Cutting Fluid

    Article • November 2021, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  23. Optimization of Sustainable Machining of Ti6Al4V Alloy Using Genetic Algorithm for Minimized Carbon Emissions and Machining Costs, and Maximized Energy Efficiency and Human Health Benefits

    Article • November 2021, ASME International

    Prof. Dr. Alper Uysal

  24. Effect of Octet-Truss Lattice Transition Geometries on Mechanical Properties

    Article • Journal of Materials Engineering and Performance, August 2021, Springer Science + Business Media

    Erkan Bahçe, Prof. Dr. Alper Uysal

  25. Analysis of slip-line model for serrated chip formation in orthogonal machining of AISI 304 stainless steel under various cooling/lubricating conditions

    Article • Journal of Manufacturing Processes, July 2021, Elsevier

    Prof. Dr. Alper Uysal

  26. Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel

    Article • The International Journal of Advanced Manufacturing Technology, June 2021, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  27. An Experimental and Statistical Investigation on Cutting Forces in Turning of AISI 304 Stainless Steel Under Dry, MQL and Nanofluid MQL Conditions

    Article • January 2021, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  28. Minimizing Surface Roughness and Radius Error in Laser Cutting of EN10346 Steel Plate

    Article • January 2021, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  29. A comparative study on performance of cermet and coated carbide inserts in straight turning AISI 316L austenitic stainless steel

    Article • The International Journal of Advanced Manufacturing Technology, November 2020, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  30. Improving the accuracy of deep hole machining by diamond honing process in 41Cr4 steel parts

    Article • IOP Conference Series Materials Science and Engineering, November 2020, Institute of Physics Publishing

    Prof. Dr. Alper Uysal

  31. Multi-objective optimization of turning parameters for targeting surface roughness and maximizing material removal rate in dry turning of AISI 316L with PVD-coated cermet insert

    Article • SN Applied Sciences, July 2020, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  32. An Investigation of Process Performance when Drilling Carbon Fiber Reinforced Polymer (CFRP) Composite under Dry, Cryogenic and MQL Environments

    Article • Procedia Manufacturing, January 2020, Elsevier

    Prof. Dr. Alper Uysal

  33. Effect of MWCNT on surface roughness and burr height in MQL milling of AISI 430 ferritic stainless steel

    Article • Ukrainian Journal of Mechanical Engineering and Materials Science, January 2020, Lviv Polytechnic National University

    Prof. Dr. Alper Uysal

  34. Minimising carbon emissions and machining costs with improved human health in sustainable machining of austenitic stainless steel through multi-objective optimisation

    Article • International Journal of Sustainable Manufacturing, January 2020, Inderscience Publishers

    Prof. Dr. Alper Uysal

  35. The Influence of Milling Parameters on Cutting Forces in High-Speed Milling of Polymer Materials

    Article • January 2020, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  36. Turning Performance of Bonded Cutting Tools with Nanographene or Multi-walled Carbon Nanotube Particle-Reinforced Epoxy-Based Nanocomposite Adhesives

    Article • Arabian Journal for Science and Engineering, May 2019, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  37. Mechanical strength of single-lap joints bonded with nano graphene and MWCNT reinforced epoxy-based nanocomposite adhesives

    Article • Materials Testing, March 2019, De Gruyter

    Prof. Dr. Alper Uysal

  38. Validation of the slip-line model for serrated chip formation in orthogonal turning under dry and MQL conditions

    Article • Procedia CIRP, January 2019, Elsevier

    Prof. Dr. Alper Uysal

  39. A slip-line model for serrated chip formation in machining of stainless steel and validation

    Article • The International Journal of Advanced Manufacturing Technology, December 2018, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  40. Influence of cutting temperature when drilling carbon black reinforced polyamides

    Article • Materials Testing, June 2018, De Gruyter

    Prof. Dr. Alper Uysal

  41. Effects of nano graphene particles on surface roughness and cutting temperature during MQL milling of AISI 430 stainless steel

    Article • Materials Testing, May 2018, De Gruyter

    Prof. Dr. Alper Uysal

  42. Evaluation of drilling parameters on surface roughness and burr when drilling carbon black reinforced high-density polyethylene

    Article • Journal of Composite Materials, January 2018, SAGE Publications

    Prof. Dr. Alper Uysal

  43. Investigation into the effectiveness of cutting parameters on wear regions of the flank wear curve and associated cutting tool life improvement

    Article • International Journal of Materials and Product Technology, January 2018, Inderscience Publishers

    Prof. Dr. Alper Uysal

  44. Accuracy estimation in drilling small holes on engineering plastics by a mathematical approach

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, November 2017, SAGE Publications

    Prof. Dr. Alper Uysal

  45. An Experimental Study on Mechanical Behavior of Nanographene/Epoxy Nanocomposites

    Article • Advances in Polymer Technology, August 2016, Wiley

    Prof. Dr. Alper Uysal

  46. Drilling of Carbon Black Reinforced Polymer

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, August 2016, SAGE Publications

    Prof. Dr. Alper Uysal

  47. Wear in MQL milling of stainless steel by nanofluid

    Article • Industrial Lubrication and Tribology, June 2016, Emerald

    Prof. Dr. Alper Uysal

  48. Cutting parameters for optimum surface roughness during end milling of carbon fiber reinforced composites

    Article • Materials Testing, May 2016, De Gruyter

    Prof. Dr. Alper Uysal

  49. Effect of work hardening of cobalt in sintered carbide cutting tool on tool failure during interrupted cutting

    Article • The International Journal of Advanced Manufacturing Technology, April 2016, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  50. Surface Roughness in Nanofluid Minimum Quantity Lubrication Milling of AISI 430 Ferritic Stainless Steel

    Article • Journal of Testing and Evaluation, April 2016, ASTM International

    Prof. Dr. Alper Uysal

  51. Investigation of Surface Roughness and Chip Forms in Milling of Stainless Steel by MQL Method

    Article • Acta Physica Polonica A, April 2016, Institute of Physics, Polish Academy of Sciences

    Prof. Dr. Alper Uysal

  52. Surface Roughness in Drilling of Electrically Conductive Polyamide

    Article • Acta Physica Polonica A, April 2016, Institute of Physics, Polish Academy of Sciences

    Prof. Dr. Alper Uysal

  53. Quality during milling of a glass fiber reinforced polymer composite

    Article • Materials Testing, August 2015, De Gruyter

    Prof. Dr. Alper Uysal

  54. RELATION BETWEEN DRILL BIT TEMPERATURE AND CHIP FORMS IN DRILLING OF CARBON BLACK REINFORCED POLYAMIDE

    Article • Journal of Thermal Engineering, July 2015, Kare Publishing

    Prof. Dr. Alper Uysal

  55. Surface Roughness of Milled Sheet Molding Compound Composites

    Article • Acta Physica Polonica A, April 2015, Institute of Physics, Polish Academy of Sciences

    Prof. Dr. Alper Uysal

  56. Slip-line field modelling of rounded-edge cutting tool for orthogonal machining

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, March 2015, SAGE Publications

    Prof. Dr. Alper Uysal

  57. An experimental study on dead metal zone in orthogonal cutting with worn rounded-edge cutting tools

    Article • International Journal of Materials and Product Technology, January 2015, Inderscience Publishers

    Prof. Dr. Alper Uysal

  58. Effect of Ploughing Force on Cutting Forces in Micro-cutting with a Rounded-edge Cutting Tool

    Article • Materials Today Proceedings, January 2015, Elsevier

    Prof. Dr. Alper Uysal

  59. A Study on Drilling of AISI 304L Stainless Steel with Nanocomposite-Coated Drill Tools

    Article • Arabian Journal for Science and Engineering, October 2014, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  60. A New Slip-Line Field Modeling of Orthogonal Machining with a Rounded-Edge Worn Cutting Tool

    Article • Machining Science and Technology, July 2014, Taylor & Francis

    Prof. Dr. Alper Uysal

  61. Experimental investigation of a slip-line field model for a worn cutting tool

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, October 2013, SAGE Publications

    Prof. Dr. Alper Uysal

  62. Effects of process parameters on surface roughness in saw cutting of polypropylene/TiO2 nano composites

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, September 2013, Springer Science + Business Media

    Prof. Dr. Alper Uysal

  63. Metallographic Analysis of the Dead Metal Zone In Metal Cutting With a Rounded-Edge Tool

    Article • Practical Metallography, May 2013, De Gruyter

    Prof. Dr. Alper Uysal

  64. A Slip-Line Approach to the Micro-Cutting Process with a Rounded-Edge Tool

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Prof. Dr. Alper Uysal

  65. Effects of cutting parameters on tool wear in drilling of polymer composite by Taguchi method

    Article • The International Journal of Advanced Manufacturing Technology, July 2011, Springer Science + Business Media

    Prof. Dr. Alper Uysal