All Stories

  1. MWCNT Takviyeli PLA Kompozitlerden Üretilen Üçlü Periyodik Minimal Yüzey Kafes Yapıların Mekanik ve Elektriksel Özelliklerinin İncelenmesi

    Article • Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, October 2026, Dicle Universitesi Muhendislik Fakultesi Muhendislik Dergisi

    Erkan Bahçe

  2. Investigation of Piezoresistive Behaviors in TPMS Lattice Structures Produced with MWCNT-Reinforced PLA Filament

    Article • Polymers, October 2026, MDPI AG

    Erkan Bahçe

  3. Machining of natural fiber reinforced polymer composites: Damage mechanisms, fiber–process interactions, and performance implications

    Article • Journal of Composite Materials, September 2026, SAGE Publications

    Erkan Bahçe

  4. Detection of periapical lesions in teeth with fixed prostheses using segmentation models and analyzing crown–lesion relationships

    Article • Journal of Prosthetic Dentistry, July 2026, Elsevier

    Erkan Bahçe

  5. Effects of Vitamin C-Containing Commercial Toothpastes on Surface Roughness and Microhardness of Composite Resins: An In Vitro Study

    Article • Applied Sciences, April 2026, MDPI AG

    Erkan Bahçe

  6. Mechanostat-Informed Strain Mapping of Osseodensification-Inspired Peri-Implant Densification Versus Conventional Drilling in Osteoporotic-like Low-Density Cancellous Bone: A 3D Static Linear Finite Element Analysis

    Article • Journal of Functional Biomaterials, March 2026, MDPI AG

    Erkan Bahçe

  7. Weibull-Based Reliability of Full-Arch Zirconia Prostheses in a Mandibular All-on-4 Model: Monolithic Versus Titanium-Bar-Supported Designs

    Article • Applied Sciences, February 2026, MDPI AG

    Erkan Bahçe

  8. Mechanostat-Informed Strain Mapping of Osseodensification-Inspired Peri-Implant Densification in Osteoporotic-Like Low-Density Cancellous Bone: A 3D Static Linear Finite Element Analysis

    Article • February 2026, MDPI AG

    Erkan Bahçe

  9. Weibull-Based Reliability of Full-Arch Zirconia Prostheses in a Mandibular All-on-4 Model: Monolithic Versus Titanium-Bar–Supported Designs

    Article • February 2026, MDPI AG

    Erkan Bahçe

  10. Production of natural source nanocrystalline cellulose and performance comparison with industrial cellulose

    Article • Proceedings of the Institution of Mechanical Engineers Part N Journal of Nanomaterials Nanoengineering and Nanosystems, December 2025, SAGE Publications

    Erkan Bahçe

  11. Detection of periapical lesions in teeth with fixed prostheses using segmentation models and analyzing crown–lesion relationships

    Article • Journal of Prosthetic Dentistry, December 2025, Elsevier

    Erkan Bahçe

  12. Evaluating the performance of AI chatbots in responding to dental implant FAQs: A comparative study

    Article • BMC Oral Health, October 2025, Springer Science + Business Media

    Erkan Bahçe

  13. Evaluating the Performance of AI Chatbots in Responding to Dental Implant FAQs: A Comparative Study

    Article • June 2025, Springer Science + Business Media

    Erkan Bahçe

  14. Compressive behavior of functional graded hybrid lattice structure

    Article • The International Journal of Advanced Manufacturing Technology, May 2025, Springer Science + Business Media

    Erkan Bahçe

  15. KAFES YAPILI FEMUR PLAKLARIN STRES KALKANI ÜZERİNDEKİ ETKİSİNİN SONLU ELEMANLAR İLE İNCELENMESİ

    Article • Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, March 2025, Dicle Universitesi Muhendislik Fakultesi Muhendislik Dergisi

    Erkan Bahçe

  16. Karbon fiber kaplamalı tpms kafes yapılarının basma testi analizi

    Article • Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, March 2025, Dicle Universitesi Muhendislik Fakultesi Muhendislik Dergisi

    Erkan Bahçe

  17. New type of infrastucture in fixed prostheses: lattice framework

    Article • Progress in Additive Manufacturing, March 2025, Springer Science + Business Media

    Erkan Bahçe

  18. Mechanical analysis of 3D printed dental restorations manufactured using different resins and validation with FEM analysis

    Article • BMC Oral Health, January 2025, Springer Science + Business Media

    Erkan Bahçe

  19. Bio‐Inspired Graded and Uniform Cylindrical Lattices Fabricated by Material Extrusion 3D Printing: An Experimental and Numerical Investigation

    Article • Journal of Applied Polymer Science, December 2024, Wiley

    Erkan Bahçe

  20. Fabrication and machining of aluminum-reinforced graphite metal matrix composites

    Article • Fullerenes Nanotubes and Carbon Nanostructures, November 2024, Taylor & Francis

    Erkan Bahçe

  21. Investigation of mechanical performance of hybrid design porous structures manufactured from CoCr Alloy

    Article • Progress in Additive Manufacturing, October 2024, Springer Science + Business Media

    Erkan Bahçe

  22. Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions

    Article • International Journal of Precision Engineering and Manufacturing-Green Technology, August 2024, Springer Science + Business Media

    Erkan Bahçe

  23. Monitoring chip color change in Ti6Al4V alloy milling and investigating the effects of cooling/lubrication on chip morphology

    Article • Journal of Manufacturing Processes, August 2024, Elsevier

    Erkan Bahçe

  24. Investigation of Delamination in The Drilling of PLA Specimens With Different Lattice Structures

    Article • Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi, May 2024, Van Yuzuncu Yil University and Institute of Health Sciences

    Erkan Bahçe

  25. Experimental and numerical study on micro-milling of CoCrW alloy produced by selective laser melting and casting

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, January 2024, SAGE Publications

    Erkan Bahçe

  26. Experimental investigation and FEM analysis of chip morphology in the turning of ASTM F-75 CoCrMo alloy

    Article • Sigma Journal of Engineering and Natural Sciences – Sigma Mühendislik ve Fen Bilimleri Dergisi, January 2024, Kare Publishing

    Erkan Bahçe

  27. Mechanical characterization of lattice structure produced by additive manufacturing under torsion and compression

    Article • Journal of Cellular Plastics, December 2023, SAGE Publications

    Erkan Bahçe

  28. WEAR AND ADHESION PROPERTIES OF MULTILAYER Ti/TiN ,(TiC)/TiCN/TaN THIN FILMS DEPOSITED ON Ti13Nb13Zr ALLOY BY CLOSE FIELD UNBALANCED MAGNETRON SPUTTERING

    Article • Acta Metallurgica Slovaca, December 2023, SciCell

    Erkan Bahçe

  29. Preparation of apricot kernel shell powder added polyester/calcium carbonate composite discs and investigation of their abrasive properties

    Article • NATURENGS MTU Journal of Engineering and Natural Sciences Malatya Turgut Ozal University, December 2023, NATURENGS MTU Journal of Engineering and Natural Sciences, Malatya Turgut Ozal University

    Erkan Bahçe

  30. Preparation and Characterization of Nano TiO2–Hydroquinone-Doped Al Composites and Investigation of Theirs Wear Properties

    Article • Protection of Metals and Physical Chemistry of Surfaces, November 2023, Pleiades Publishing Ltd

    Erkan Bahçe

  31. CASE STUDY OF A DISTAL FEMUR TI6Al4V LOCKED COMPRESSION PLATE FAILURE SURFACE INVESTIGATION AND FINITE ELEMENT ANALYSIS

    Article • Journal of Mechanics in Medicine and Biology, October 2023, World Scientific Pub Co Pte Lt

    Erkan Bahçe

  32. Finite element analysis of lattice designed lumbar interbody cage based on the additive manufacturing

    Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, June 2023, SAGE Publications

    Erkan Bahçe

  33. Özgün Bir Jet Motor Şaftının Farklı Eğim Açılarına Sahip Türbin Kanatçığı için Tasarımı ve Analizi

    Article • Bayburt Üniversitesi Fen Bilimleri Dergisi, June 2023, Isletme Ekonomi ve Yonetim Arastirmalari Dergisi

    Erkan Bahçe

  34. Investigation of the Effect of Feed Rate on Vibration in Aluminum Milling

    Article • Karadeniz Fen Bilimleri Dergisi, June 2023, Karadeniz Fen Bilimleri Dergisi

    Erkan Bahçe

  35. Experimental and Theoretical Studies on Bending Performance of Hot Press GFRP Composite Panels

    Article • Black Sea Journal of Engineering and Science, June 2023, Black Sea Journal of Engineering and Science

    Erkan Bahçe

  36. Investigation of the mechanical properties triple periodic minimal surfaces lattice structures with functional graded of porosity

    Article • Journal of Cellular Plastics, May 2023, SAGE Publications

    Erkan Bahçe

  37. Cam Elyaf Takviyeli Polimer Kompozitlerin Delmesinde Takım Çapının İtme Kuvveti ve Titreşim Üzerindeki Etkisinin Araştırılması

    Article • Black Sea Journal of Engineering and Science, April 2023, Black Sea Journal of Engineering and Science

    Erkan Bahçe

  38. Optimization of parameters for drilling composite materials with freeform surfaces

    Article • Materials and Manufacturing Processes, March 2023, Taylor & Francis

    Erkan Bahçe

  39. The effects of HAp coating layer on mechanical and optical properties at bonding interface of high-performance polymers

    Article • Journal of the Mechanical Behavior of Biomedical Materials, January 2023, Elsevier

    Erkan Bahçe

  40. Analysis of Drilling Behaviour in Jute Fibres Reinforced Natural Composites

    Article • Journal of Natural Fibers, December 2022, Taylor & Francis

    Erkan Bahçe

  41. Prediction of tool deflection using image processing in ball-end milling

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, November 2022, SAGE Publications

    Erkan Bahçe

  42. Dimensional Accuracy of Porous Structures Manufactured Using Air Controller

    Article • September 2022, Springer Science + Business Media

    Erkan Bahçe, Prof. Dr. Alper Uysal

  43. Mechanical analysis of three-unit metal-free fixed dental prostheses produced in different materials with CAD/CAM technology

    Article • Clinical Oral Investigations, July 2022, Springer Science + Business Media

    Erkan Bahçe

  44. Eklemeli İmalatta Üretim Yönünün Parça Üretimine Etkileri

    Article • Karadeniz Fen Bilimleri Dergisi, June 2022, Karadeniz Fen Bilimleri Dergisi

    Erkan Bahçe

  45. Eklemeli İmalat ve Geleneksel İmalat Yöntemi ile Üretilen CoCr Alaşımı Yüzeylerde Hidroksiapatit (HAp) Kaplamanın Karşılaştırılması

    Article • Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi, April 2022, Van Yuzuncu Yil University and Institute of Health Sciences

    Erkan Bahçe

  46. Investigation of thermal damage in bone drilling: Hybrid processing method and pathological evaluation of existing methods

    Article • Journal of the Mechanical Behavior of Biomedical Materials, February 2022, Elsevier

    Erkan Bahçe

  47. Productıon and Cleaning of Lattice Structures Used in the Space and Aerospace Industry with Metal Additive Manufacturing Method

    Article • Journal of Materials Engineering and Performance, January 2022, Springer Science + Business Media

    Erkan Bahçe, Prof. Dr. Alper Uysal

  48. Evaluation of the accuracy of dental casts manufactured with 3D printing technique in the All-on-4 treatment concept

    Article • The Journal of Advanced Prosthodontics, January 2022, The Korean Academy of Prosthodontics (KAMJE)

    Erkan Bahçe

  49. Ti6Al4V Malzemesinin Mikro Frezeleme İşleminde Sonlu Elemanlar Yöntemi İle Kriyojenik Soğutmanın Etkisinin İncelenmesi

    Article • International Journal of Innovative Engineering Applications, December 2021, International Journal of Innovative Engineering Applications

    Erkan Bahçe

  50. Electrochemical Corrosion and Metal Ion Release Protective Efficiency of the Multilayer TaN Coatings on CoCrMo Biomedical Alloy

    Article • Materials Science, November 2021, Publishing House Technologija

    Erkan Bahçe

  51. Effect of Octet-Truss Lattice Transition Geometries on Mechanical Properties

    Article • Journal of Materials Engineering and Performance, August 2021, Springer Science + Business Media

    Erkan Bahçe, Prof. Dr. Alper Uysal

  52. Investigation of the Lattice Production of Removable Dental Prostheses with CoCr Alloy Using Additive Manufacturing

    Article • Journal of Materials Engineering and Performance, June 2021, Springer Science + Business Media

    Erkan Bahçe

  53. Investigating MoP bearing wear behavior in a hip simulator with muscular properties

    Article • Emerging Materials Research, March 2021, ICE Publishing

    Erkan Bahçe

  54. Experimental Investigation of Delamination Formed by Bone Drilling

    Article • Tehnicki vjesnik - Technical Gazette, June 2020, Mechanical Engineering Faculty in Slavonski Brod

    Erkan Bahçe

  55. Wear and validation of posterior stabilized knee prosthesis with the knee simulator

    Article • Materials Technology, June 2020, Taylor & Francis

    Erkan Bahçe

  56. Burr Measurement Method Based on Burr Surface Area

    Article • International Journal of Precision Engineering and Manufacturing-Green Technology, June 2020, Springer Science + Business Media

    Erkan Bahçe

  57. KALÇA PROTEZLERİNDE OLUŞAN AŞINMANIN FEMUR KAS-İSKELET SİSTEMİ TABANLI SONLU ELEMANLAR ANALİZİ İLE İNCELENMESİ

    Article • Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, December 2019, Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi

    Erkan Bahçe

  58. Tribological investigation of multilayer CrN/CrCN/TaN films deposited by close field unbalanced magnettron sputtering

    Article • REVIEWS ON ADVANCED MATERIALS SCIENCE, December 2019, De Gruyter

    Erkan Bahçe

  59. Investigation of the Surface Properties TaN Based Thin Film Coatings on the CoCrMo Alloy

    Article • Karadeniz Fen Bilimleri Dergisi, December 2019, Karadeniz Fen Bilimleri Dergisi

    Erkan Bahçe

  60. Production of abrasive apricot kernel shell powder/boron nitride/polyester composites for cleaning of paint and corrosion on metal surfaces

    Article • Polymer Composites, October 2019, Wiley

    Erkan Bahçe

  61. Investigation of the burr formation during the drilling of free-form surfaces in al 7075 alloy

    Article • Journal of Materials Research and Technology, September 2019, Elsevier

    Burak ÖZDEMİR, Erkan Bahçe

  62. Investigation of wear of ultra high molecular weight polyethylene in a soft tissue behaviour knee joint prosthesis wear test simulator

    Article • Journal of Materials Research and Technology, September 2019, Elsevier

    Erkan Bahçe

  63. Investigation of Surface Quality of CoCrMo Alloy Used in the Tibial Component of the Knee Prosthesis According to the Methods of Turning and Turning-Grinding

    Article • Materials Science, August 2019, Publishing House Technologija

    Erkan Bahçe

  64. Tool deflection measurement with image proccess.

    Article • IET Image Processing, August 2019, the Institution of Engineering and Technology (the IET)

    Burak ÖZDEMİR, Erkan Bahçe

  65. Influence of a stepped feed rate on burr formation when drilling Al-5005

    Article • Materials Testing, February 2018, De Gruyter

    Erkan Bahçe

  66. Low Dielectric Constant Polyimide-Zirconium Nanocomposites with Improved Thermal Properties

    Article • International Journal of Polymeric Materials, March 2008, Taylor & Francis

    Erkan Bahçe