Contact

All Stories

  1. ENGINEERING PEDAGOGY COURSE MAPPING

    Article • Acta Metallurgica Slovaca, March 2022, SciCell

    PhD Anatoliy Zavdoveev, Dr Oleksandr Viktorovych Perig

  2. Materials extrusion-inspired engineering reflection of social pressure-induced environmental impact on academy community well-being

    Article • Work, February 2021, IOS Press

    PhD Anatoliy Zavdoveev, Dr Oleksandr Viktorovych Perig

  3. Reducing the risk of formation of the eutectic Cu-Cu2O during welding of copper with steel by improving treatment preparation technology

    Article • Advances in Materials and Processing Technologies, February 2021, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  4. Improvement of technology for repair of ore-bucket unloader metal structure working under cyclic loading

    Article • Advances in Materials and Processing Technologies, August 2020, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  5. Analysis of the reasons for the penetration of copper into steel during welding

    Article • Advances in Materials and Processing Technologies, August 2020, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  6. Improvement of the heat state in welding copper with steel

    Article • Advances in Materials and Processing Technologies, June 2020, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  7. Educational research into socio-economic dynamics of university graduate employment: Triple analogy-based physics-and-engineering approach to labor market oscillations

    Article • Work, January 2020, IOS Press

    Dr Oleksandr Viktorovych Perig

  8. CFD-enhanced description of local viscous flow through expansion equal channel angular extrusion geometric domain

    Article • Advances in Materials and Processing Technologies, September 2019, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  9. Didactic games as student-friendly tools for learning hydraulics in a technical university’s undergraduate curriculum

    Article • Industry and Higher Education, January 2019, SAGE Publications

    Dr Oleksandr Viktorovych Perig

  10. FEM-based deformation regression analysis of ECAE strains

    Article • FME Transaction, January 2019, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr Oleksandr Viktorovych Perig

  11. Research into payload swaying reduction through cable length manipulation during Boom crane motion

    Article • FME Transaction, January 2019, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr Oleksandr Viktorovych Perig

  12. Method for Teaching Students to Make a Simple Geometric Estimation of the Macroscopic Rotational Modes of Large Deformations during Pressure Forming

    Article • International Journal of Continuing Engineering Education and Life-Long Learning, January 2019, Inderscience Publishers

    Dr Oleksandr Viktorovych Perig

  13. Recent Postdigital Transformations of Undergraduate Learning Processes in the Study of Multidisciplinary Materials Science

    Article • International Journal of Continuing Engineering Education and Life-Long Learning, January 2019, Inderscience Publishers

    Dr Oleksandr Viktorovych Perig

  14. Edification in creation of Lattice Boltzmann models for materials science students

    Article • International Journal of Continuing Engineering Education and Life-Long Learning, January 2019, Inderscience Publishers

    Dr Oleksandr Viktorovych Perig

  15. ALTERNATIVE STUDY OF A BEVEL PUNCH-ASSISTED ECAE SCHEME

    Article • Acta Metallurgica Slovaca, December 2018, Technical University of Kosice, Faculty of Manfacturing Technologies

    Dr Oleksandr Viktorovych Perig

  16. Hydraulic Analogy Method for Phenomenological Description of the Learning Processes of Technical University Students

    Article • European Journal of Contemporary Education, December 2018, Academic Publishing House Researcher

    Dr Oleksandr Viktorovych Perig

  17. Didactic Student-Friendly Approaches to More Effective Teaching of the Fundamentals of Scientific Research in a Digital Era of Scientometrics

    Article • Eurasia Journal of Mathematics Science and Technology Education, September 2018, Modestum Limited

    Dr Oleksandr Viktorovych Perig

  18. APPLICATION OF JMODELICA.ORG TO TEACHING THE FUNDAMENTALS OF DYNAMICS OF FOUCAULT PENDULUM-LIKE GUIDED SYSTEMS TO ENGINEERING STUDENTS

    Article • Information Technologies and Learning Tools, December 2017, Institute of Information Technologies and Learning Tools of NAES of Ukraine

    Dr Oleksandr Viktorovych Perig, Prof. Daniel Condurache

  19. Development of forging processes using intermediate workpiece profiling before drawing: research into strained state

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, May 2017, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  20. 2D CFD description of the kinematic effects of movable inlet and outlet die wall transport motion and punch shape geometry on the dynamics of viscous flow during ECAE through Segal 2θ-dies for a range of channel angles

    Article • January 2017, American Institute of Mathematical Sciences (AIMS)

    Dr Oleksandr Viktorovych Perig

  21. Effects of Material Rheology and Die Walls Translational Motions on the Dynamics of Viscous Flow during Equal Channel Angular Extrusion through a Segal 2θ-Die: CFD 2D Solution of a Curl Transfer Equation

    Article • Advances in Materials Science and Engineering, January 2017, Hindawi Publishing Corporation

    Dr Oleksandr Viktorovych Perig

  22. Research into 2D Dynamics and Control of Small Oscillations of a Cross-Beam during Transportation by Two Overhead Cranes

    Article • Shock and Vibration, January 2017, Hindawi Publishing Corporation

    Dr Oleksandr Viktorovych Perig

  23. The experimental verification of the known flow line models describing local flow during ECAE (ECAP)

    Article • Letters on Materials, January 2017, Institute for Metals Superplasticity Problems of RAS

    Dr Oleksandr Viktorovych Perig

  24. Effect of workpiece viscosity on strain unevenness during equal channel angular extrusion: CFD 2D solution of Navier–Stokes equations for the physical variables ‘flow velocities—punching pressure’

    Article • Materials Research Express, November 2016, Institute of Physics Publishing

    Dr Oleksandr Viktorovych Perig

  25. Calculation of recovery plasticity in multistage hot forging under isothermal conditions

    Article • SpringerPlus, October 2016, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  26. Simulation-assisted teaching of graduate students in transport: A case study of the application of acausal freeware JModelica.org to solution of Sakawas open-loop optimal control problem for payload motion during crane boom rotation

    Article • International Journal of Mechanical Engineering Education, October 2016, SAGE Publications

    Dr Oleksandr Viktorovych Perig

  27. A new process for forging shafts with convex dies. Research into the stressed state

    Article • The International Journal of Advanced Manufacturing Technology, September 2016, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  28. Numerical JModelica.org-based approach to a simulation of Coriolis effects on guided boom-driven payload swaying during non-uniform rotary crane boom slewing

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, June 2016, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig, Prof. Daniel Condurache

  29. CFD 2D Description of Local Flow of Polymer Workpiece through a modified U-Shaped Die During Equal Channel Multiple Angular Extrusion

    Article • Materials Research, June 2016, FapUNIFESP (SciELO)

    Dr Oleksandr Viktorovych Perig

  30. Research of energy-power parameters during powder wire flattening

    Article • The International Journal of Advanced Manufacturing Technology, April 2016, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  31. Development of a new process for forging plates using intensive plastic deformation

    Article • The International Journal of Advanced Manufacturing Technology, December 2015, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  32. New schemes of forging plates, shafts, and discs

    Article • The International Journal of Advanced Manufacturing Technology, June 2015, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  33. Fracture initiation from initial spherical flaws in incompressible propellant materials

    Article • Matéria (Rio de Janeiro), June 2015, FapUNIFESP (SciELO)

    Dr Oleksandr Viktorovych Perig

  34. Two-parameter Rigid Block Approach to Upper Bound Analysis of Equal Channel Angular Extrusion Through a Segal 2θ-die

    Article • Materials Research, June 2015, FapUNIFESP (SciELO)

    Dr Oleksandr Viktorovych Perig

  35. ECAP process improvement based on the design of rational inclined punch shapes for the acute-angled Segal 2θ-dies: CFD 2-D description of dead zone reduction

    Article • Mechanical Sciences, April 2015, Copernicus GmbH

    Dr Oleksandr Viktorovych Perig

  36. Effect of 2θ-Punch Shape on Material Waste during ECAE through a 2θ-Die

    Article • Materials and Manufacturing Processes, December 2014, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  37. Research into the process of producing powder tapes

    Article • The International Journal of Advanced Manufacturing Technology, November 2014, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  38. 2D upper bound analysis of ECAE through 2θ-dies for a range of channel angles

    Article • Materials Research, October 2014, FapUNIFESP (SciELO)

    Dr Oleksandr Viktorovych Perig

  39. CFD 2D simulation of viscous flow during ECAE through a rectangular die with parallel slants

    Article • The International Journal of Advanced Manufacturing Technology, June 2014, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  40. CFD SIMULATION OF ECAE THROUGH A MULTIPLE-ANGLE DIE WITH A MOVABLE INLET WALL

    Article • Chemical Engineering Communications, May 2014, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  41. Rational parameters of profiled workpieces for an upsetting process

    Article • The International Journal of Advanced Manufacturing Technology, February 2014, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  42. 3 DOF Spherical Pendulum Oscillations with a Uniform Slewing Pivot Center and a Small Angle Assumption

    Article • Shock and Vibration, January 2014, Hindawi Publishing Corporation

    Dr Oleksandr Viktorovych Perig, Prof. Daniel Condurache

  43. Spherical Pendulum Small Oscillations for Slewing Crane Motion

    Article • The Scientific World JOURNAL, January 2014, Hindawi Publishing Corporation

    Dr Oleksandr Viktorovych Perig

  44. Two-Dimensional Solute Transport from a Varying Pulse-Type Point Source

    Article • January 2014, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  45. Study of ECAE mechanics by upper bound rigid block model with two degrees of freedom

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, December 2013, Springer Science + Business Media

    Dr Oleksandr Viktorovych Perig

  46. Analysis of equal channel angular extrusion by upper bound method and rigid blocks model

    Article • Materials Research, November 2013, FapUNIFESP (SciELO)

    Dr Oleksandr Viktorovych Perig

  47. Effect of Die Radii on Material Waste during Equal Channel Angular Extrusion

    Article • Materials and Manufacturing Processes, June 2013, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  48. Shape Effect of Angular Die External Wall on Strain Unevenness during Equal Channel Angular Extrusion

    Article • Materials and Manufacturing Processes, June 2013, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  49. Intensive Shear Deformation in Billets During Forging with Specially Formed Anvils

    Article • Materials and Manufacturing Processes, May 2013, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  50. Forging of Ingots Without Hot Tops

    Article • Materials and Manufacturing Processes, March 2013, Taylor & Francis

    Dr Oleksandr Viktorovych Perig

  51. Systemization of Severe Plastic Deformation (SPD) processes for the production of ultrafine-grained and nanocrystalline structures within bulk workpieces

    Article • Letters on Materials, January 2012, Institute for Metals Superplasticity Problems of RAS

    Dr Oleksandr Viktorovych Perig

  52. An experimental and theoretical analysis of geometric features of equal channel plastic flow during angular extrusion of materials via route C

    Article • Letters on Materials, January 2012, Institute for Metals Superplasticity Problems of RAS

    Dr Oleksandr Viktorovych Perig

  53. Kinematic features of viscous flow of amorphous materials during an equal channel multiple-angle extrusion through a 2-turn rectangular die

    Article • Letters on Materials, January 2011, Institute for Metals Superplasticity Problems of RAS

    Dr Oleksandr Viktorovych Perig

  54. Equal channel angular extrusion of soft solids

    Article • Materials Science and Engineering A, June 2010, Elsevier

    Dr Oleksandr Viktorovych Perig