All Stories

  1. AI Equation Forecasts Duration of Government Projects Using Multiple Factors

    Article • Engineering Construction & Architectural Management, June 2025, Emerald

    Ahmad Kueh

  2. Study on the Hysteresis Performance of Notch-Type Compliant Joints Based on Experimental and Finite-Element Simulation

    Article • Journal of Engineering Mechanics, April 2025, American Society of Civil Engineers (ASCE)

    Ahmad Kueh

  3. Competing reinforced concrete cover crack modes: Plain and stainless reinforcements rust growth and load effects

    Article • Materials Today Communications, February 2025, Elsevier

    Ahmad Kueh

  4. Tensegrity Prediction of E. coli Deactivation by Sonication Strategy

    Article • Journal of Advanced Research Design, December 2024, Akademia Baru Publishing

    Ahmad Kueh

  5. Compressive Characteristics of Interleaved Origami Tube Metamaterials Based on the “Flip-Flop” Fold Pattern

    Article • International Journal of Applied Mechanics, September 2024, World Scientific Pub Co Pte Lt

    Ahmad Kueh

  6. An analysis of the environmental effects of three types of concrete: Ready-mixed, reactive powder, and geopolymer

    Article • Ain Shams Engineering Journal, September 2024, Elsevier

    Ahmad Kueh

  7. Packing optimization and design of the deployable parabolic rigid antenna based on origami

    Article • Advances in Space Research, June 2024, Elsevier

    Ahmad Kueh

  8. Aqueous-phase Reforming of Glycerol using Cu-Ni Bimetal Catalyst Supported over Coconut Shell Activated Carbon

    Article • Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, March 2024, Akademia Baru Publishing

    Ahmad Kueh

  9. Mechanical Characteristics of Silica Aerogel Mortar and Sandwiched Mortar with Silica Aerogel Mat Core

    Article • Journal of Materials in Civil Engineering, January 2024, American Society of Civil Engineers (ASCE)

    Ahmad Kueh

  10. Modelling Mix Composition of Steel Fiber Reinforced Geopolymer Concrete (Sfrgc) for Ultra-High Strength

    Article • January 2024, Elsevier

    Ahmad Kueh

  11. Numerical Study of Incompressible Flow Past a Circular Cylinder at Low Reynolds Number Using COMSOL Multiphysics

    Article • January 2024, Springer Science + Business Media

    Ahmad Kueh

  12. Experimental study of twisted thin-walled box components in single-layer domes

    Article • Case Studies in Construction Materials, December 2023, Elsevier

    Ahmad Kueh

  13. Rigidity analysis and mechanical properties of programmable origami tubes

    Article • Mechanics Research Communications, October 2023, Elsevier

    Ahmad Kueh

  14. Resonant frequency of coronavirus: The tensegrity approach

    Article • Alexandria Engineering Journal, September 2023, Elsevier

    Ahmad Kueh

  15. Simplified surface wettability determination defined by new interfacial interaction compatibility expressions for composites

    Article • Journal of Adhesion Science and Technology, August 2023, Taylor & Francis

    Ahmad Kueh

  16. Quantification, characteristics, and distribution of microplastics released from waste burning furnaces and their associated health impacts

    Article • Environmental Quality Management, July 2023, Wiley

    Ahmad Kueh

  17. Adsorptive zeolitic imidazolate framework-8 membrane on ceramic support for the removal of lead(II) ions

    Article • Chemical Engineering Science, July 2023, Elsevier

    Ahmad Kueh

  18. Single and repetitive low-velocity impact responses of sandwich composite structures with different skin and core considerations: A review

    Article • Case Studies in Construction Materials, July 2023, Elsevier

    Ahmad Kueh

  19. Thermally-induced responses of triaxially woven fabric composites

    Article • Heliyon, July 2023, Elsevier

    Ahmad Kueh

  20. Imperfection Insensitivity of Origami-Inspired Tubular Structures

    Article • Acta Mechanica Solida Sinica, June 2023, Springer Science + Business Media

    Ahmad Kueh

  21. Methylene blue adsorption mechanism onto palm kernel shell-derived activated carbon: From particle diffusion to site adsorption

    Article • BioResources, June 2023, BioResources

    Ahmad Kueh

  22. Acoustical and mechanical characteristics of mortars with pineapple leaf fiber and silica aerogel infills – Measurement and modeling

    Article • Materials Today Communications, June 2023, Elsevier

    Ahmad Kueh

  23. Effect of Wall Oscillation Period on Fluid Flow in Branched Channel with a Moving Indentation

    Article • Malaysian Journal of Fundamental and Applied Sciences, April 2023, Penerbit UTM Press

    Ahmad Kueh

  24. Impact of Montmorillonite Clay on Polysulfone Mixed Matrix Membrane for Heavy Metal Adsorption

    Article • Water Air & Soil Pollution, April 2023, Springer Science + Business Media

    Ahmad Kueh

  25. Form-finding analysis and optimization of cable membrane structure based on iterative correction of tension process

    Article • Advances in Space Research, March 2023, Elsevier

    Ahmad Kueh

  26. Leaching Behaviour of Synthetic Leachate through a Sewage Sludge and Red Gypsum Composite as Intermediate Landfill Cover

    Article • Sustainability, February 2023, MDPI AG

    Ahmad Kueh

  27. Employing an Artificial Neural Network in Correlating a Hydrogen-Selective Catalytic Reduction Performance with Crystallite Sizes of a Biomass-Derived Bimetallic Catalyst

    Article • Catalysts, July 2022, MDPI AG

    Ahmad Kueh

  28. Water–Cement Ratio on High-Cycle Fatigue in the Theory of Critical Distances of Plain Concrete

    Article • Iranian Journal of Science and Technology Transactions of Civil Engineering, May 2022, Springer Science + Business Media

    Ahmad Kueh

  29. Analytical model and general calculation procedure for wrinkled membrane parameters

    Article • International Journal of Mechanical Sciences, May 2022, Elsevier

    Ahmad Kueh

  30. Prediction of Equivalent Chloride Ion Diffusion Coefficient in Cracked Concrete of the in-Service RC Element

    Article • KSCE Journal of Civil Engineering, May 2022, Elsevier

    Ahmad Kueh

  31. Artificial Neural Network-Forecasted Compression Strength of Alkaline-Activated Slag Concretes

    Article • Sustainability, April 2022, MDPI AG

    Ahmad Kueh

  32. Mixed Finite Element Formulation for Navier–Stokes Equations for Magnetic Effects on Biomagnetic Fluid in a Rectangular Channel

    Article • Materials, April 2022, MDPI AG

    Ahmad Kueh

  33. EDITORIAL SCOPE – STRUCTURE AND MATERIAL EDITION

    Article • Journal of Civil Engineering Science and Technology, April 2022, UNIMAS Publisher

    Ahmad Kueh

  34. A Sustainable Reuse of Agro-Industrial Wastes into Green Cement Bricks

    Article • Materials, February 2022, MDPI AG

    Ahmad Kueh

  35. MECHANICAL PROPERTIES AND FRACTURE PREDICTION OF CONCRETES CONTAINING OIL PALM SHELL AND EXPANDED CLAY FOR FULL REPLACEMENT OF CONVENTIONAL AGGREGATES

    Article • Jurnal Teknologi (Sciences & Engineering), January 2022, Penerbit UTM Press

    Ahmad Kueh

  36. Bioremediation of micropollutants using living and non-living algae - Current perspectives and challenges

    Article • Environmental Pollution, January 2022, Elsevier

    Ahmad Kueh

  37. Folding Responses of Origami-Inspired Structures Connected by Groove Compliant Joints

    Article • Journal of Mechanisms and Robotics, November 2021, ASME International

    Ahmad Kueh

  38. Impact resistance of bio-inspired sandwich beam with side-arched and honeycomb dual-core

    Article • Composite Structures, November 2021, Elsevier

    Ahmad Kueh

  39. Artificial neural network and regressed beam-column connection explicit mathematical moment-rotation expressions

    Article • Journal of Building Engineering, November 2021, Elsevier

    Ahmad Kueh

  40. Thermal Behavior and Energy Efficiency of Modified Concretes in the Tropical Climate: A Systemic Review

    Article • Sustainability, October 2021, MDPI AG

    Ahmad Kueh

  41. Shifting from Conventional to Organic Filter Media in Wastewater Biofiltration Treatment: A Review

    Article • Applied Sciences, September 2021, MDPI AG

    Ahmad Kueh

  42. Prospective biodegradation of organic and nitrogenous pollutants from palm oil mill effluent by acidophilic bacteria and archaea

    Article • Bioresource Technology Reports, September 2021, Elsevier

    Ahmad Kueh

  43. Wrapping Deployment Simulation Analysis of Leaf-Inspired Membrane Structures

    Article • Aerospace, August 2021, MDPI AG

    Ahmad Kueh

  44. Experimental and numerical appraisal of steel joints integrated with single- and double-angles for transmission line towers

    Article • Thin-Walled Structures, July 2021, Elsevier

    Ahmad Kueh

  45. Opportunities and Challenges for Sustainable Bioremediation of Natural and Synthetic Estrogens as Emerging Water Contaminants Using Bacteria, Fungi, and Algae

    Article • Water Air & Soil Pollution, June 2021, Springer Science + Business Media

    Ahmad Kueh

  46. Experimental and numerical evaluations of composite concrete-to-concrete interfacial shear strength under horizontal and normal stresses

    Article • PLOS One, May 2021, PLOS

    Ahmad Kueh

  47. Two-Dimensional Meshfree-Based Digital Image Correlation for Strain-Displacement Measurement

    Article • Experimental Techniques, May 2021, Springer Science + Business Media

    Ahmad Kueh

  48. Spent ground coffee – awaking the sustainability prospects

    Article • Environmental and Toxicology Management, April 2021, Universitas Nahdlatul Ulama Surabaya

    Ahmad Kueh

  49. Thermal Performance of Structural Lightweight Concrete Composites for Potential Energy Saving

    Article • Crystals, April 2021, MDPI AG

    Ahmad Kueh

  50. Compressive and Flexural Strengths of Mortar with Silica Aerogel Powder

    Article • January 2021, Springer Science + Business Media

    Ahmad Kueh

  51. Hydroelastic responses of plates with sinusoidal tubercles under perpendicularly loaded flow

    Article • Ocean Engineering, January 2021, Elsevier

    Ahmad Kueh

  52. Contesting crack modes modeling of reinforced concrete structure threatened by the progressive rust expansion in rebars in the presence of external load

    Article • Construction and Building Materials, December 2020, Elsevier

    Ahmad Kueh

  53. Flow responses alteration by geometrical effects of tubercles on plates under the maximal angle of attack

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, November 2020, SAGE Publications

    Ahmad Kueh

  54. Effects of water-cement ratio and notches to the flexural strength of concrete

    Article • IOP Conference Series Materials Science and Engineering, May 2020, Institute of Physics Publishing

    Ahmad Kueh

  55. Numerical study on drag and lift coefficients of a marine riser at high Reynolds number using COMSOL multiphysics

    Article • IOP Conference Series Earth and Environmental Science, April 2020, Institute of Physics Publishing

    Ahmad Kueh

  56. Failure behavior of sandwich honeycomb composite beam containing crack at the skin

    Article • PLOS One, February 2020, PLOS

    Ahmad Kueh

  57. Silver nanoparticles adsorption by the synthetic and natural adsorbent materials: an exclusive review

    Article • Nanotechnology for Environmental Engineering, January 2020, Springer Science + Business Media

    Prof. Mohamad Ali Fulazzaky, Ahmad Kueh

  58. Performance of spent garnet as a sand replacement in high-strength concrete exposed to high temperature

    Article • Journal of Structural Fire Engineering, December 2019, Emerald

    Ahmad Kueh

  59. Strut waviness and load orientation affected fracture toughness knockdown in biaxially woven square lattices

    Article • International Journal of Mechanical Sciences, December 2019, Elsevier

    Ahmad Kueh

  60. A Review of Design Methods of Transverse Reinforcement of Concrete Bridge Deck on Prestressed Girders

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Ahmad Kueh

  61. Failure mode maps of bio-inspired sandwich beams under repeated low-velocity impact

    Article • Composites Science and Technology, September 2019, Elsevier

    Ahmad Kueh

  62. Finite Element State-Space Model of Edge Initiating Localized Interfacial Degeneration of Damped Composite Laminated Plates

    Article • IOP Conference Series Materials Science and Engineering, September 2019, Institute of Physics Publishing

    Ahmad Kueh

  63. Influences of Yield Strength and Section Depth to the Compression Capacity of Single Cold-Formed Channel Lipped

    Article • IOP Conference Series Materials Science and Engineering, September 2019, Institute of Physics Publishing

    Ahmad Kueh

  64. High-density concrete: Exploring Ferro boron effects in neutron and gamma radiation shielding

    Article • Construction and Building Materials, August 2019, Elsevier

    Ahmad Kueh

  65. Structural performance of steel beams and frames with slant end-plate connections at elevated temperature

    Article • Engineering Structures, May 2019, Elsevier

    Ahmad Kueh

  66. A review on wooden formwork for concrete casting

    Article • IOP Conference Series Materials Science and Engineering, April 2019, Institute of Physics Publishing

    Ahmad Kueh

  67. Removal of Silver Nanoparticles from Water Environment: Experimental, Mathematical Formulation, and Cost Analysis

    Article • Water Air & Soil Pollution, April 2019, Springer Science + Business Media

    Ahmad Kueh

  68. Multi-objective optimization of underground car park design for tenability under fire-induced smoke

    Article • Tunnelling and Underground Space Technology, March 2019, Elsevier

    Ahmad Kueh

  69. Evaluation of the Performance of Helmet Prototypes Fabricated from Acrylonitrile Butadiene Styrene Composites Filled with Natural Resource

    Article • Materials, December 2018, MDPI AG

    Ahmad Kueh

  70. Efficient cumulative breakage distribution and breakage rate computation with minimal experiment intervention incorporating optimal time determination for fine grinding simulation

    Article • Powder Technology, April 2018, Elsevier

    Ahmad Kueh

  71. Bio-inspired vs. conventional sandwich beams: A low-velocity repeated impact behavior exploration

    Article • Construction and Building Materials, April 2018, Elsevier

    Ahmad Kueh

  72. EXPERIMENTAL STUDY ON THE PERFORMANCE OF SLANT END-PLATE CONNECTIONS AT ELEVATED TEMPERATURE

    Article • March 2018, Hong Kong Institute of Steel Construction

    Ahmad Kueh

  73. FIRE RESISTANCE OF A DAMAGED BUILDING EMPLOYING BUCKLING RESTRAINED BRACED SYSTEM

    Article • March 2018, Hong Kong Institute of Steel Construction

    Ahmad Kueh

  74. Behaviour of soft soil improved by floating soil–cement columns

    Article • International Journal of Physical Modelling in Geotechnics, March 2018, Emerald

    Ahmad Kueh

  75. Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection

    Article • Advances in Structural Engineering, February 2018, SAGE Publications

    Ahmad Kueh

  76. Silver Nanoparticles in the Water Environment in Malaysia: Inspection, characterization, removal, modeling, and future perspective

    Article • Scientific Reports, January 2018, Springer Science + Business Media

    Ahmad Kueh

  77. A review on the application of the theory of critical distance towards concrete

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Ahmad Kueh

  78. Review study on the current development of confined high-strength concrete

    Article • International Journal of Structural Engineering, January 2018, Inderscience Publishers

    Ahmad Kueh

  79. Novel Weed-Extracted Silver Nanoparticles and Their Antibacterial Appraisal against a Rare Bacterium from River and Sewage Treatment Plan

    Article • Nanomaterials, December 2017, MDPI AG

    Ahmad Kueh

  80. Stress-strain evaluation of steel-strapped high-strength concrete with modified self-regulating end clips

    Article • Structural Concrete, November 2017, Wiley

    Chee Loong Chin, Ahmad Kueh

  81. Comparative low-velocity impact behavior of bio-inspired and conventional sandwich composite beams

    Article • Composites Science and Technology, September 2017, Elsevier

    Ahmad Kueh

  82. Capacity of Lightly Reinforced Bridge Deck Cantilever Overhang Subjected to Static Loading

    Article • Advanced Science Letters, September 2017, American Scientific Publishers

    Ahmad Kueh

  83. Influence of tows waviness and anisotropy on effective Mode I fracture toughness of triaxially woven fabric composites

    Article • Engineering Fracture Mechanics, September 2017, Elsevier

    Ahmad Kueh

  84. The effect of laminate stacking sequence and fiber orientation on the dynamic response of FRP composite slabs

    Article • Journal of Building Engineering, September 2017, Elsevier

    Ahmad Kueh

  85. Physical, thermal, and mechanical properties of polypropylene composites filled with rattan nanoparticles

    Article • Journal of Applied Research and Technology, August 2017, Universidad Nacional Autonoma de Mexico

    Ahmad Kueh

  86. A Review of Silver Nanoparticles: Research Trends, Global Consumption, Synthesis, Properties, and Future Challenges

    Article • Journal of the Chinese Chemical Society, June 2017, Wiley

    Tony Hadibarata, Ahmad Kueh

  87. A purely green synthesis of silver nanoparticles using Carica papaya, Manihot esculenta, and Morinda citrifolia: synthesis and antibacterial evaluations

    Article • Bioprocess and Biosystems Engineering, June 2017, Springer Science + Business Media

    Ahmad Kueh

  88. Bearing capacity charts of soft soil reinforced by deep mixing

    Article • Proceedings of the Institution of Civil Engineers - Ground Improvement, February 2017, ICE Publishing

    Ahmad Kueh

  89. Experimental study on the shear behaviour of precast concrete hollow core slabs with concrete topping

    Article • Engineering Structures, October 2016, Elsevier

    Ahmad Kueh

  90. Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study

    Article • Construction and Building Materials, September 2016, Elsevier

    Ahmad Kueh

  91. Numerical Study on the Structural Performance of Steel Beams with Slant End-plate Connections

    Article • Latin American Journal of Solids and Structures, July 2016, FapUNIFESP (SciELO)

    Ahmad Kueh

  92. Criteria of Acceptance for Constant Rate of Strain Consolidation Test for Tropical Cohesive Soil

    Article • Geotechnical and Geological Engineering, April 2016, Springer Science + Business Media

    Ahmad Kueh

  93. Quantitative impact response analysis of reinforced concrete beam using the Smoothed Particle Hydrodynamics (SPH) method

    Article • STRUCTURAL ENGINEERING AND MECHANICS, December 2015, Techno-Press

    Ahmad Kueh

  94. LOW-VELOCITY IMPACT OF COMPOSITE SANDWICH PLATE WITH FACESHEET INDENTATION DESCRIPTION

    Article • Jurnal Teknologi (Sciences & Engineering), November 2015, Penerbit UTM Press

    Ahmad Kueh

  95. EFFECTS OF NANOPARTICLE FILLER ON THERMO-PHYSICAL PROPERTIES OF RATTAN POWDER-FILLED POLYPROPYLENE COMPOSITES

    Article • Jurnal Teknologi (Sciences & Engineering), November 2015, Penerbit UTM Press

    Ahmad Kueh

  96. Fire response of a 3D multi-storey building with buckling restrained braces

    Article • Latin American Journal of Solids and Structures, November 2015, FapUNIFESP (SciELO)

    Ahmad Kueh

  97. Stability of triaxially woven fabric composites employing geometrically nonlinear plate model with volume segmentation ABD constitution

    Article • Journal of Composite Materials, October 2015, SAGE Publications

    Ahmad Kueh

  98. A numerical analysis on the performance of buckling restrained braces at fire-study of the gap filler effect

    Article • Steel and Composite Structures, September 2015, Techno-Press

    Ahmad Kueh

  99. CHARACTERIZATION OF SHEAR BOND STRESS FOR DESIGN OF COMPOSITE SLABS USING AN IMPROVED PARTIAL SHEAR CONNECTION METHOD

    Article • Journal of Civil Engineering and Management, June 2015, Vilnius Gediminas Technical University

    Ahmad Kueh

  100. Behaviour of weak soils reinforced with soil cement columns formed by the deep mixing method: Rigid and flexible footings

    Article • Measurement, May 2015, Elsevier

    Ahmad Kueh

  101. Friction and cohesion coefficients of composite concrete-to-concrete bond

    Article • Cement and Concrete Composites, February 2015, Elsevier

    Ahmad Kueh

  102. Economic aspect of square hollow section in the design of multi-storey unbraced steel frame

    Article • Materials Research Innovations, December 2014, Taylor & Francis

    Ahmad Kueh

  103. Uniaxial compressive stability of laminated composite plate with localised interfacial degeneration

    Article • Materials Research Innovations, December 2014, Taylor & Francis

    Ahmad Kueh

  104. Comparative study on the behaviour of Buckling Restrained Braced frames at fire

    Article • Journal of Constructional Steel Research, November 2014, Elsevier

    Ahmad Kueh

  105. Direct stiffness model of slant connection under thermal and non-symmetric gravity load

    Article • Journal of Constructional Steel Research, November 2014, Elsevier

    Ahmad Kueh

  106. Development of Rapid Consolidation Equipment for Cohesive Soil

    Article • Geotechnical and Geological Engineering, October 2014, Springer Science + Business Media

    Ahmad Kueh

  107. Analytical study of slant end-plate connection subjected to elevated temperatures

    Article • Steel and Composite Structures, July 2014, Techno-Press

    Ahmad Kueh

  108. Optimal sensor placement for mode shapes using improved simulated annealing

    Article • Smart Structures and Systems, March 2014, Techno-Press

    Ahmad Kueh

  109. Size-influenced mechanical isotropy of singly-plied triaxially woven fabric composites

    Article • Composites Part A Applied Science and Manufacturing, February 2014, Elsevier

    Ahmad Kueh

  110. Finite Element Modeling of Laminated Composite Plates with Locally Delaminated Interface Subjected to Impact Loading

    Article • The Scientific World JOURNAL, January 2014, Hindawi Publishing Corporation

    Ahmad Kueh

  111. Vibration Characteristics of Composite Footbridges under Various Human Running Loads

    Article • ISRN Civil Engineering, October 2013, Wiley

    Ahmad Kueh

  112. Magnetic Field Effects on 3D Blood Flow Patterns of Straight and Stenotic Arteries

    Article • Advanced Science Letters, September 2013, American Scientific Publishers

    Ahmad Kueh

  113. Computational impact responses of reinforced concrete slabs

    Article • Computers and Concrete, July 2013, Techno-Press

    Ahmad Kueh

  114. Dynamic response of composite footbridges under running pedestrian load

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mohammadreza Vafaei, Ahmad Kueh

  115. Bending Response of Cross‐Ply Laminated Composite Plates with Diagonally Perturbed Localized Interfacial Degeneration

    Article • The Scientific World JOURNAL, January 2013, Wiley

    Ahmad Kueh

  116. Buckling of sandwich columns reinforced by triaxial weave fabric composite skin-sheets

    Article • International Journal of Mechanical Sciences, January 2013, Elsevier

    Ahmad Kueh

  117. The effect of magnetisation and Lorentz forces in a two-dimensional biomagnetic channel flow

    Article • January 2013, American Institute of Physics

    Ahmad Kueh

  118. Structural Behaviour of Combined Flange-Cleat and Gusset Plate Connection for Cold-Formed Steel Double Channel Sections

    Article • Advanced Science Letters, August 2012, American Scientific Publishers

    Ahmad Kueh

  119. Flexural Performance of Laminated Composite Plates with Diagonally Perturbed Localized Delamination

    Article • Advanced Science Letters, July 2012, American Scientific Publishers

    Ahmad Kueh

  120. Experimental Investigation on Locally Produced Cold-Formed Steel Sections for Roof Truss System

    Article • Advanced Science Letters, June 2012, American Scientific Publishers

    Ahmad Kueh

  121. Element Free Galerkin Formulation of Composite Beams with Longitudinal and Transverse Partial Interactions

    Article • Applied Mechanics and Materials, May 2012, Trans Tech Publications

    Ahmad Kueh

  122. Optimization of Cold-Formed Channel Sections Using Imperialist Competitive Algorithm

    Article • Applied Mechanics and Materials, May 2012, Trans Tech Publications

    Ahmad Kueh

  123. Fitting-free hyperelastic strain energy formulation for triaxial weave fabric composites

    Article • Mechanics of Materials, April 2012, Elsevier

    Ahmad Kueh

  124. Size Effects on Biaxially Compressed Stability of Triaxial Weave Fabric Composites

    Article • Advanced Materials Research, February 2012, Trans Tech Publications

    Ahmad Kueh

  125. Size Dependent Uniaxially Loaded Stability of Triaxial Weave Fabric Composites

    Article • Applied Mechanics and Materials, September 2011, Trans Tech Publications

    Ahmad Kueh

  126. Behaviour of Composite Beam with Trapezoid Web Profiled Steel Section in Sub-Assemblage Frame

    Article • Advanced Materials Research, May 2011, Trans Tech Publications

    Ahmad Kueh

  127. Experimental Investigation on Slip-In Connection for Cold-Formed Steel Double Channel Sections

    Article • Advanced Materials Research, May 2011, Trans Tech Publications

    Ahmad Kueh

  128. Maximum Local Thermal Effects Carpet Plot for Symmetric Laminated Composite Plates

    Article • Advanced Materials Research, May 2011, Trans Tech Publications

    Ahmad Kueh

  129. Experimental Investigation of End-Plate Connection with Cruciform Column Section

    Article • Advanced Materials Research, May 2011, Trans Tech Publications

    Ahmad Kueh

  130. Staggered Grid Computation of Fluid Flow with an Improved Discretisation of Finite Differencing

    Article • January 2011, Springer Science + Business Media

    Ahmad Kueh