All Stories

  1. Theoretical analysis of the compressible flow in Ranque–Hilsch vortex tube
  2. Computational study of flow separation in truncated ideal contour nozzles under high-altitude conditions
  3. Effect of upstream injection and pylon downstream of the cavity on the mixing characteristics
  4. Experimental study on cavitation inhibition in a butterfly valve with different plate shapes
  5. A Brief Review on the Advances of Passive Strut Combustors
  6. Hydrogen As An Alternative Aviation Fuel—A Review
  7. Energy-Efficient Retrofitting of Buildings in the Tropics Through Daylight and Solar Radiation Harnessing
  8. Prospects for scramjet engines in reusable launch applications: A review
  9. Effect of passive strut angle on the vortical structures and mixing characteristics of scramjet combustor
  10. Efficacious slosh suppression technique in road tankers to enhance the effectiveness of drinking water distribution
  11. Study on Control of Unsteadiness and Flow Asymmetry in Linear Aerospike Nozzles
  12. Modal analysis of mixing characteristics in scramjet combustor with passive struts
  13. Transdisciplinary learning exercise on post occupancy evaluation and retrofitting of built spaces
  14. Thermo-Fluid Analysis on the Efficiency of Wet Compression Process
  15. Prediction and visualization of supersonic nozzle flows using OpenFOAM
  16. Green energy for environmental sustainability
  17. Analysis of Battery Thermal Management System for Electric Vehicles using 1-Tetradecanol Phase Change Material
  18. Investigation of optimal water utilization for water spray cooled photovoltaic panel: A three-dimensional computational study
  19. Selection of working fluids for solar organic Rankine cycle—A review
  20. Advancements in renewable energy transition in India: A review
  21. Wind power resource assessment and wind-hydrogen generation potential: a case study
  22. Numerical investigation and experimental validation of controlled venting of Helium from a high pressure gas bottle
  23. Sloshing Behavior of Different Fluids in a Cylindrical Tank
  24. Combustion efficiency improvement for scramjet combustor with strut based flame stabilizer using passive techniques
  25. Computational investigation of cooling effectiveness for film cooled dual-bell exhaust nozzle for LO2/LH2 liquid rocket engines
  26. Numerical Analysis of Flowfield in Linear Plug Nozzle with Base Bleed
  27. Buzz characteristics and separation bubble dynamics in supersonic intake
  28. Revision of Undergraduate Engineering Curriculum with Emphasis on Project-Based Teaching Learning Approach - Case Study of KTU
  29. Visualization of flow through planar double divergent nozzles by computational method
  30. A Study on the Flow Physics of Altitude Adaptive Nozzles
  31. Comparison of Flow Features Inside a Plain Orifice Injector for Different Length-to-Diameter Ratios
  32. Computational Study on the Flow Characteristics in a Film Cooled Dual-Bell Nozzle
  33. Effects of flap on the reentry aerodynamics of a blunt cone in the supersonic flow
  34. Numerical Simulation on Optimization of Pintle Base Shape in Planar Expansion-Deflection Nozzles
  35. Computational study on reducing flow asymmetry in over-expanded planar nozzle by incorporating double divergence
  36. Investigation of flow characteristics in supersonic combustion ramjet combustor toward improvement of combustion efficiency
  37. Performance of ejector refrigeration cycle based on solar energy working with various refrigerants
  38. A Numerical Study on Planar Nozzles with Different Divergence Angles
  39. Assessment of Aerodynamic Characteristics on Shock Vector Control
  40. Disruptions in Engineering Education: Perceptions of Mid-Career Academicians
  41. Estimation of Shear-Induced Blood Damage in Artificial Heart Valve Components
  42. Experimental Study on Temperature Profile Within a Compressed Air Tank
  43. Experimental and Numerical Investigation of Sloshing Phenomenon in Cylindrical and Rectangular Tanks Subjected to Linear Excitation
  44. Flow Characteristics of Confined G-CO2 and S-CO2 Jets
  45. Numerical Investigation on Flow Separation Characteristics of Truncated Ideal Contour Nozzles
  46. Pseudo Shock Wave in a Slotted Duct of Constant Area
  47. Recent Asian Research on Thermal and Fluid Sciences
  48. Trans-disciplinary Project Based Learning Models for Community Service
  49. Computational investigation on the flow characteristics in beam dyeing process
  50. Computational study on flow through truncated conical plug nozzle with base bleed
  51. Study on reduction in pressure losses in pipe bends using guide vanes
  52. Energy efficiency analysis of wet compression systems through thermo-fluid dynamic considerations
  53. Numerical study of flow through planar double divergent nozzles
  54. Study of flow characteristics of supersonic flow through pipe bends
  55. Investigation on the effect of baffle position on sloshing in tanks
  56. Study of Conical Aerospike Nozzles with Base-Bleed and Freestream Effects
  57. Parametric study of supersonic film cooling in dual bell nozzle for an experimental air–kerosene engine
  58. Comparative study of boundary layer control around an ordinary airfoil and a high lift airfoil with secondary blowing
  59. A Study on the Charge-Discharge Cycle of a Compressed Hydrogen Tank for Automobiles
  60. Analysis of Coriolis Effect in a Curved Pipe Conveying Hydrogen Using Timoshenko Beam Element
  61. Computational Study on the Design for Fluid Flow in High Angular Velocity Screw Pumps
  62. Performance Analysis of Ceramic Composite Thermal Protection System Tiles
  63. Thermodynamic Analysis of Inlet Air Cooling System for a Centrifugal Compressor
  64. Computational study of performance characteristics for truncated conical aerospike nozzles
  65. Computational study on the influence of number of threads on the performance of single screw pump at high angular velocities
  66. Computational Study on Aerodynamic and Thermal Characteristics of a Hot Jet in Parallel Flow
  67. Thermo-Fluid Dynamics of the Effects of Water Spray on Air Compression Process
  68. Thermo-fluid dynamic analysis of wet compression process
  69. Numerical Analysis of Hypersonic Flow Past Blunt Bodies with Aerospikes
  70. Thermo-Fluid Dynamic Analysis on the Compression Process of Liquid-Gas Two-Phase
  71. Transforming Kerala-Role of University in Building Entrepreneurship
  72. Computational Study of Hypersonic Flow Past Spiked Blunt Body Using RANS and DSMC Method
  73. STUDY OF HYPERSONIC FLOW PAST SPIKED BLUNT BODY USING DIRECT SIMULATION MONTE CARLO METHOD
  74. Mass flow prediction of the coriolis meter using C0 continuous beam elements
  75. Comparative study of turbulence models performance for refueling of compressed hydrogen tanks
  76. Numerical analysis on thermo-fluid dynamic behavior of hydrogen gas during fast high pressure filling
  77. Three dimensional numerical computations on the fast filling of a hydrogen tank under different conditions
  78. Experimental investigations on impaction pin nozzles for inlet fogging system
  79. Numerical Simulation of the Filling-Up Process of a Hydrogen Fuel Tank for Vehicular Applications
  80. Thermo-Fluid Dynamic Behavior of Water Droplets Injected Into Air Stream
  81. Numerical simulation of duct flow with fog droplets
  82. Visualization of Hysteresis Phenomenon of Shock Waves in Supersonic Internal Flow
  83. Experimental study on the inlet fogging system using two-fluid nozzles