All Stories

  1. Experimental and Numerical Modelling of the 4-Point Bending Test of Hinged Concrete Beams Externally Bonded with CFRP Composites
  2. Development of a high-performance blast energy-absorbing system for building structures
  3. Experimental Validation and Numerical Analysis of a High-Performance Blast Energy-Absorbing System for Building Structures
  4. Numerical Modeling of Reinforced Concrete T-Beams
  5. Experimental Research and Development on Blast Resistant Structures
  6. Innovative Seismic Strengthening Techniques to Be Used in RC Beams’ Critical Zones
  7. Slab–column connection punching and ductility improvement methods for seismic response of buildings with flat slabs
  8. Performance of single and double flat jacks in stone masonry lab tests
  9. The efficiency of confinement reinforcement in post-tensioning anchorage zones
  10. Progressive Collapse Prevention Design of Framed RC Structures-Cost–Benefit Analysis
  11. Role of punching shear reinforcement in the seismic performance of flat slab frames
  12. Post-earthquake Performance of a Slab-Column Connection with Punching Shear Reinforcement
  13. Behavior of RC flat slabs with shear bolts under reversed horizontal cyclic loading
  14. Experimental evaluation of cyclic loading test procedure including gravity load on RC beams
  15. Gravity load effects on the behaviour of reinforced concrete beam critical zones subjected to cyclic loads
  16. Efficiency of the confinement reinforcement in anchorage zones of posttensioning tendons
  17. Reversed horizontal cyclic loading tests of flat slab specimens with studs as shear reinforcement
  18. Performance assessment of flat slabs strengthened with a bonded reinforced-concrete overlay
  19. Development of steel angles as energy dissipation devices for rocking connections
  20. Experimental analysis of rubble stone masonry walls strengthened by transverse confinement under compression and compression-shear loadings
  21. Numerical Simulation of Blast Effects on Fibre Grout Strengthened RC Panels
  22. Rubble Stone Masonry Walls in Portugal: Material Properties, Carbonation Depth and Mechanical Characterization
  23. Damage Detection Sensitivity of a Vehicle-based Bridge Health Monitoring System
  24. Characterisation of unidirectional fibre reinforced grout as a strengthening material for RC structures
  25. Optimization of anchorage corner blisters for posttensioning tendons
  26. Strengthening of RC slabs with reinforced concrete overlay on the tensile face
  27. Punching behaviour of RC flat slabs under reversed horizontal cyclic loading
  28. Punching of high strength concrete flat slabs without shear reinforcement
  29. Long term application of bus monitoring system to short and medium span bridges and damage detection
  30. Um Modelo Simplificado Para Análise do Comportamento Dinâmico de Torres Treliçadas em Concreto Armado Para Turbinas Eólicas Offshore
  31. Rubble Stone Masonry Walls Strengthened by Three-Dimensional Steel Ties and Textile-Reinforced Mortar Render, Under Compression and Shear Loads
  32. The effect of the vertical component of prestress forces on the punching strength of flat slabs
  33. SFRC flat slabs punching behaviour – Experimental research
  34. Rubble Stone Masonry Walls Strengthened by Three-Dimensional Steel Ties and Textile Reinforced Mortar Render, Under Compression
  35. Assessing the behaviour of RC beams subject to significant gravity loads under cyclic loads
  36. Discussion: Pull-out and push-in tests of bonded steel strands
  37. Discussion of “Strengthening Two-Way Reinforced Concrete Floor Slabs Using Polypropylene Fiber Reinforcement” by Matthew J. Radik, Ece Erdogmus, and Travis Schafer
  38. Compression behaviour of short columns made from cement-bonded particle board
  39. Development of an injectable grout for concrete repair and strengthening
  40. Post-punching behaviour of flat slabs strengthened with a new technique using post-tensioning
  41. Punching of Strengthened Concrete Flat Slabs—Experimental Analysis and Comparison with Codes
  42. Pull-out and push-in tests of bonded steel strands
  43. Strengthening of flat slabs with post-tensioning using anchorages by bonding
  44. Rubble stone masonry walls in Portugal strengthened with reinforced micro-concrete layers
  45. Punching of flat slabs with in-plane forces
  46. Development of a penetration test for timber impregnation products for use in old buildings
  47. Post-punching behaviour of prestressed concrete flat slabs
  48. Seismic Behaviour of Limestone Masonry Buildings