What is it about?

Liquefaction of saturated sandy soils has been considered as the main cause of most geotechnical hazards during earthquakes. Generation of excess pore water pressures in saturated silty sands when subjected to monotonic, cyclic, and earthquake loading has been shown to cause the liquefaction, which can be defined as the transformation of stable soil structure into unstable liquid form. The proposed research investigated the effect of grading characteristics on the generated excess pore water pressure of sand–silt mixture samples in loose, medium dense, and dense states. The laboratory investigation aimed at understanding the extent or degree at which excess pore pressure of sand–silt mixture soil is affected by its gradation under static loading conditions. For the purpose of clarifying and evaluating the generated pore pressure characteristics of sandy soils, a series of undrained monotonic triaxial tests were carried out on different reconstituted samples of sand–silt mixtures with various gradations. The soil samples were tested under a constant confining pressure (σ3′ = 100 kPa) and at three relative densities (Dr = 20 %, 53 %, and 91 %). The results from this laboratory investigation were used to develop insight into the pore water pressure response of sand and sand–silt mixtures under monotonic loading conditions. The analysis of the obtained data revealed that the grading characteristics [D10, D50, Cu, effective size ratio (ESR), and mean grain size ratio (MGSR)] have significant influence on the generation of the excess pore water pressure. It was found that maximum positive excess pore water pressure (Δumax) can be correlated to the grading characteristics for the sand–silt mixture. The ESR and MGSR appear as pertinent parameters to predict the excess pore water pressure response of the sand–silt mixtures for soil gradation under study

Featured Image

Why is it important?

Liquefaction of saturated sandy soils has been considered as the main cause of most geotechnical hazards during earthquakes. Generation of excess pore water pressures in saturated silty sands when subjected to monotonic, cyclic, and earthquake loading has been shown to cause the liquefaction, which can be defined as the transformation of stable soil structure into unstable liquid form. The proposed research investigated the effect of grading characteristics on the generated excess pore water pressure of sand–silt mixture samples in loose, medium dense, and dense states. The laboratory investigation aimed at understanding the extent or degree at which excess pore pressure of sand–silt mixture soil is affected by its gradation under static loading conditions. For the purpose of clarifying and evaluating the generated pore pressure characteristics of sandy soils, a series of undrained monotonic triaxial tests were carried out on different reconstituted samples of sand–silt mixtures with various gradations. The soil samples were tested under a constant confining pressure (σ3′ = 100 kPa) and at three relative densities (Dr = 20 %, 53 %, and 91 %). The results from this laboratory investigation were used to develop insight into the pore water pressure response of sand and sand–silt mixtures under monotonic loading conditions. The analysis of the obtained data revealed that the grading characteristics [D10, D50, Cu, effective size ratio (ESR), and mean grain size ratio (MGSR)] have significant influence on the generation of the excess pore water pressure. It was found that maximum positive excess pore water pressure (Δumax) can be correlated to the grading characteristics for the sand–silt mixture. The ESR and MGSR appear as pertinent parameters to predict the excess pore water pressure response of the sand–silt mixtures for soil gradation under study

Perspectives

Liquefaction of saturated sandy soils has been considered as the main cause of most geotechnical hazards during earthquakes. Generation of excess pore water pressures in saturated silty sands when subjected to monotonic, cyclic, and earthquake loading has been shown to cause the liquefaction, which can be defined as the transformation of stable soil structure into unstable liquid form. The proposed research investigated the effect of grading characteristics on the generated excess pore water pressure of sand–silt mixture samples in loose, medium dense, and dense states. The laboratory investigation aimed at understanding the extent or degree at which excess pore pressure of sand–silt mixture soil is affected by its gradation under static loading conditions. For the purpose of clarifying and evaluating the generated pore pressure characteristics of sandy soils, a series of undrained monotonic triaxial tests were carried out on different reconstituted samples of sand–silt mixtures with various gradations. The soil samples were tested under a constant confining pressure (σ3′ = 100 kPa) and at three relative densities (Dr = 20 %, 53 %, and 91 %). The results from this laboratory investigation were used to develop insight into the pore water pressure response of sand and sand–silt mixtures under monotonic loading conditions. The analysis of the obtained data revealed that the grading characteristics [D10, D50, Cu, effective size ratio (ESR), and mean grain size ratio (MGSR)] have significant influence on the generation of the excess pore water pressure. It was found that maximum positive excess pore water pressure (Δumax) can be correlated to the grading characteristics for the sand–silt mixture. The ESR and MGSR appear as pertinent parameters to predict the excess pore water pressure response of the sand–silt mixtures for soil gradation under study

Prof. Mostefa BELKHATIR
Universite Hassiba Benbouali de Chlef

Read the Original

This page is a summary of: Insight into the Effects of Gradation on the Pore Pressure Generation of Sand–Silt Mixtures, Geotechnical Testing Journal, July 2014, ASTM International,
DOI: 10.1520/gtj20130051.
You can read the full text:

Read

Contributors

The following have contributed to this page