What is it about?

Compression rings are the main sources of frictional losses in internal combustion engines. The present paper aims to present a thermo-mixed hydrodynamic analysis for coated top compression rings. To understand the coating effects, the main tribological parameters are investigated into a ring-cylinder conjunction in a motorbike engine. Furthermore, flow simulations have been carried out on how different worn profiles on the cylinder inner liner affects friction, lubricant film and localized contact deformation of the coated compression rings.

Featured Image

Why is it important?

This research shows that because of thermal effects, the boundary friction is higher at reversals and the viscous friction is lower because of reduced oil viscosity. As regards to the isothermal case, the viscous friction is greater because of a higher lubricant viscosity. In the case of chromium-plated ring, boundary friction was 16 per cent lower than a grey cast iron ring taking into account thermal effects. Regarding the localized contact deformation, the coated compression rings showed lower values under different worn cylinder shapes. In particular, hard wear-resistant (Ni-Cr-Mo) coating showed the slighter local deformation. Therefore, the worn cylinder profiles promote boundary/mixed lubrication regime, whereas the lobed profile of cylinder inner liner becomes more wavy.

Read the Original

This page is a summary of: Thermo-mixed lubrication analysis of coated compression rings with worn cylinder profiles, Industrial Lubrication and Tribology, January 2017, Emerald,
DOI: 10.1108/ilt-11-2015-0169.
You can read the full text:

Read

Contributors

The following have contributed to this page