All Stories

  1. The Bio-Adhesion Behaviour of Banana Leaves as Soil Remover at Elevated Temperatures

    Article • Tribology Online, January 2016, Japanese Society of Tribologists

    PROF CHE HUSNA AZHARI

  2. Rheological characteristics of unaged and aged epoxidised natural rubber modified asphalt

    Article • Construction and Building Materials, January 2016, Elsevier

    PROF CHE HUSNA AZHARI

  3. Aspects of Titanate Coupling Agents and their Application in Dental Polymer Composites: A Review

    Article • Advanced Materials Research, December 2015, Trans Tech Publications

    PROF CHE HUSNA AZHARI, Professor Dr Andanastuti Muchtar, Nidal Elshereksi

  4. IMPROVEMENT OF MECHANICAL PROPERTIES OF Y-TZP VIA CERIA ADDITION AND COLD ISOSTATIC PRESSING METHOD

    Article • Jurnal Teknologi, November 2015, Penerbit UTM Press

    PROF CHE HUSNA AZHARI, Mr Mohamed M.M. Aboras

  5. Evaluation of thermal, morphological and mechanical properties of PMMA/NaCl/DMF electrospun nanofibers: an investigation through surface methodology approach

    Article • Iranian Polymer Journal, October 2015, Springer Science + Business Media

    PROF CHE HUSNA AZHARI

  6. Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Ceria-Zirconia Prepared by Colloidal Process

    Article • Advanced Materials Research, October 2015, Trans Tech Publications

    Mr Mohamed M.M. Aboras, PROF CHE HUSNA AZHARI

  7. Optimization of pH and dispersant amount of Y-TZP suspension for colloidal stability

    Article • Ceramics International, September 2015, Elsevier

    PROF CHE HUSNA AZHARI, Mr Mohamed M.M. Aboras

  8. Energy absorption and load carrying capability of woven natural silk epoxy–triggered composite tubes

    Article • Composites Part B Engineering, August 2015, Elsevier

    PROF CHE HUSNA AZHARI

  9. Types of Failures in Porcelain-Fused-to-Metal Dental Restoration

    Article • January 2015, Springer Science + Business Media

    PROF CHE HUSNA AZHARI, Mr Mohamed M.M. Aboras

  10. Skin Friction Coefficient and Boundary Layer Trend on UKM Aster i-Bond

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    PROF CHE HUSNA AZHARI, Dr Wan Mohd Faizal Wan Mahmood

  11. A Review of the Low-Temperature Degradation of Dental Zirconia

    Article • Applied Mechanics and Materials, August 2014, Trans Tech Publications

    PROF CHE HUSNA AZHARI, Mr Mohamed M.M. Aboras

  12. Physical and rheological properties of epoxidized natural rubber modified bitumens

    Article • Construction and Building Materials, July 2014, Elsevier

    PROF CHE HUSNA AZHARI

  13. Bombyx mori silk fibre and its composite: A review of contemporary developments

    Article • Materials & Design (1980-2015), May 2014, Elsevier

    PROF CHE HUSNA AZHARI

  14. Failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism

    Article • International Journal of Impact Engineering, February 2014, Elsevier

    PROF CHE HUSNA AZHARI

  15. Rheological Characteristics of Epoxidized Natural Rubber Modified Bitumen

    Article • Applied Mechanics and Materials, January 2014, Trans Tech Publications

    PROF CHE HUSNA AZHARI

  16. Perspectives for Titanium-Derived Fillers Usage on Denture Base Composite Construction: A Review Article

    Article • Advances in Materials Science and Engineering, January 2014, Hindawi Publishing Corporation

    PROF CHE HUSNA AZHARI, Nidal Elshereksi

  17. Effect of trigger configuration on the crashworthiness characteristics of natural silk epoxy composite tubes

    Article • Composites Part B Engineering, December 2013, Elsevier

    PROF CHE HUSNA AZHARI

  18. Effects of electron-beam and sulfur crosslinking of epoxidized natural rubber on the friction performance of semimetallic friction materials

    Article • Composites Part B Engineering, November 2013, Elsevier

    PROF CHE HUSNA AZHARI

  19. Impact Behaviour of Woven Natural Silk Composite Face-Sheet Sandwiched Foam under Low Velocity Impact

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    PROF CHE HUSNA AZHARI

  20. Impact damage characteristics in reinforced woven natural silk/epoxy composite face-sheet and sandwich foam, coremat and honeycomb materials

    Article • International Journal of Impact Engineering, August 2013, Elsevier

    PROF CHE HUSNA AZHARI

  21. Comparative research on the crashworthiness characteristics of woven natural silk/epoxy composite tubes

    Article • Materials & Design (1980-2015), May 2013, Elsevier

    PROF CHE HUSNA AZHARI

  22. Effects of epoxidized natural rubber–alumina nanoparticles (ENRAN) composites in semi-metallic brake friction materials

    Article • Wear, April 2013, Elsevier

    PROF CHE HUSNA AZHARI

  23. An experimental investigation on the response of woven natural silk fiber/epoxy sandwich composite panels under low velocity impact

    Article • Fibers and Polymers, January 2013, Springer Science + Business Media

    PROF CHE HUSNA AZHARI

  24. Finite element modelling of axially crushed silk/epoxy composite square tubes

    Article • Composite Structures, January 2013, Elsevier

    PROF CHE HUSNA AZHARI

  25. The failure mode of natural silk epoxy triggered composite tubes

    Article • IOP Conference Series Materials Science and Engineering, September 2012, Institute of Physics Publishing

    PROF CHE HUSNA AZHARI

  26. Crashworthiness characteristics investigation of silk/epoxy composite square tubes

    Article • Composite Structures, July 2012, Elsevier

    PROF CHE HUSNA AZHARI

  27. An Analysis of the Leasehold Concept in the Land Management System of Indonesia and Malaysia

    Article • The Social Sciences, March 2012, Science Alert

    PROF CHE HUSNA AZHARI

  28. Energy absorption and failure response of silk/epoxy composite square tubes: Experimental

    Article • Composites Part B Engineering, March 2012, Elsevier

    PROF CHE HUSNA AZHARI

  29. Influence of Polyacrilonitrile (PAN) Concentration on the Mechanical and Physical Properties of Electrospun Fibres

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    PROF CHE HUSNA AZHARI

  30. Process optimization of melt spinning and mechanical strength enhancement of functionalized multi-walled carbon nanotubes reinforcing polyethylene fibers

    Article • Composites Part B Engineering, January 2011, Elsevier

    Professor Kamaruzaman Jusoff, PROF CHE HUSNA AZHARI

  31. Sustainable rural energy: traditional water wheels in Padang (PWW), Indonesia

    Article • International Journal of Renewable Energy Technology, January 2011, Inderscience Publishers

    PROF CHE HUSNA AZHARI

  32. Effect of Silane Concentrations on Mode I Interlaminar Fracture of Woven Silk/Epoxy Composites

    Article • Advanced Materials Research, October 2010, Trans Tech Publications

    PROF CHE HUSNA AZHARI

  33. The impact damage response of plain woven natural silk/epoxy laminated composite plates

    Article • International Journal of Engineering Science and Technology, September 2010, African Journals Online (AJOL)

    PROF CHE HUSNA AZHARI

  34. Correlation of Filler Loading and Silane Coupling Agent on the Physical Characteristics of Epoxidized Natural Rubber-Alumina Nanoparticles Composites

    Article • Journal of Elastomers & Plastics, March 2010, SAGE Publications

    PROF CHE HUSNA AZHARI

  35. Interfacial Treatment of Multi-Layer Woven Silk Reinforced Epoxy Composites

    Article • Advanced Materials Research, March 2010, Trans Tech Publications

    PROF CHE HUSNA AZHARI

  36. Epoxidized natural rubber-alumina nanoparticle composites: Optimization of mixer parameters via response surface methodology

    Article • Journal of Applied Polymer Science, January 2010, Wiley

    PROF CHE HUSNA AZHARI

  37. Sustainable Rural Energy: Traditional Water Wheels in Padang (PWW) Indonesia

    Article • January 2010, American Institute of Physics

    PROF CHE HUSNA AZHARI

  38. Initiating automotive component reuse in Malaysia

    Article • Journal of Cleaner Production, November 2009, Elsevier

    PROF CHE HUSNA AZHARI

  39. Islam and Modernity in the Works of Two Contemporary Malay Anglophone Writers: Che Husna Azhari’s “Mariah” and Karim Raslan’s “Neighbors”

    Article • The Journal of Commonwealth Literature, August 2009, SAGE Publications

    PROF CHE HUSNA AZHARI

  40. Pitch and Timbre Determination of the Angklung

    Article • American Journal of Applied Sciences, January 2009, Science Publications

    PROF CHE HUSNA AZHARI

  41. Multistage Development of Müller-Achenbach model for Shape Memory Alloy

    Article • American Journal of Engineering and Applied Sciences, April 2008, Science Publications

    PROF CHE HUSNA AZHARI

  42. Interlaminar Fracture Properties of Multi-Layer Woven Silk Fibre/Polyester Composites

    Article • Asian Journal of Applied Sciences, February 2008, Science Alert

    PROF CHE HUSNA AZHARI

  43. Advanced VOCs decomposition method by gliding arc plasma

    Article • Chemical Engineering Journal, July 2007, Elsevier

    PROF CHE HUSNA AZHARI, Antonius Indarto

  44. The Performance Of Semi–Metallic Friction Materials For Passenger Cars

    Article • Jurnal Teknologi, June 2007, Penerbit UTM Press

    PROF CHE HUSNA AZHARI

  45. Analysis of the Sound of the Kompang for Computer Music Synthesis

    Article • June 2006, Institute of Electrical & Electronics Engineers (IEEE)

    PROF CHE HUSNA AZHARI

  46. Thermal and flow property-morphology relationship of sugarcane bagasse fiber-filled polyamide 6 blends

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    PROF CHE HUSNA AZHARI

  47. Interlaminar fracture properties of fibre reinforced natural rubber/polypropylene composites

    Article • Journal of Materials Processing Technology, October 2002, Elsevier

    PROF CHE HUSNA AZHARI

  48. Biodegradation of Natural Rubber by Actinomycete No. 4 in a Continuous Culture System

    Article • Pakistan Journal of Biological Sciences, March 2002, Science Alert

    PROF CHE HUSNA AZHARI

  49. Mathematical modelling of thermoplastic natural rubber melt flow in a double feed extrusion system

    Article • Polymer, September 1998, Elsevier

    PROF CHE HUSNA AZHARI