All Stories

  1. Numerical estimation of the peel strength of adhesive joints via the floating roller peel test
  2. Experimental and cohesive zone modelling study on composite joining by co-curing and adhesive bonding for sheet moulding compound or carbon-fibre prepreg laminates
  3. Adhesive peeling performance vs. adherend combination: polymer composite, aluminum, and hybrid.
  4. A new structural two-component epoxy adhesive: Strength and fracture characterization
  5. Mechanical behaviour assessment of unsaturated polyester polymer mortars filled with nano-sized Al 2 O 3 and ZrO 2 particles
  6. Effects of carbon nanotube modified adhesive layer on low velocity impact and flexural properties of cork core sandwich structures
  7. Multifunctional Material Systems: A state-of-the-art review
  8. An Investigation on Fire and Flexural Mechanical Behaviors of Nano and Micro Polyester Composites Filled with SiO2 and Al2O3 Particles
  9. Impact on fire reaction and mechanical properties of composites with hybrid flame retardant systems
  10. The Combined Effect of Phosphinates with Al2O3, Mg(OH)2 or SiO2 Nano/Micro Particles on Mechanical and Fire Reaction Properties of Unsaturated Polyester Composites
  11. Low velocity impact and flexural performance of sandwich structures with cork and polymer foam cores
  12. Characterization of carbon nanotube 3D-structures infused with low viscosity epoxy resin system
  13. High CNT content composites with CNT Buckypaper and epoxy resin matrix: Impregnation behaviour composite production and characterization
  14. Magnetic nanocomposite materials obtained using magnetic nano fluids and resins
  15. Dynamic Mechanical Thermal Analysis of Flame-Retardant Unsaturated Polyester Nanocomposites: The Effect of Aluminum Hydroxide (ATH) and Nanoclays
  16. Magnetic nanocomposites obtained using high evaporation rate magnetic nanofluids
  17. Mechanical Performance of Unsaturated Polyester Resins Modified with Powder from Scrap Tyre Rubber
  18. Low Velocity Impact of Thermosetting Composite Systems Modified with Rubber and Cork Powders
  19. Flexural performance of polyester and epoxy polymer mortars under severe thermal conditions
  20. Mechanical characterization of lightweight polymer mortar modified with cork granulates
  21. Mechanical characterization of lightweight polymer mortar modified with cork granulates
  22. Mechanical Behaviour of Cork-Modified Polymer Concrete
  23. Particularity Concerning the Use of Nanomagnetic Fluids and the Magnetic Field, to Enhance the Production of Composit Parts Components Made by RTM – MNF