All Stories

  1. CFD study of the effect of perforated spacer on pressure loss and mass transfer in spacer-filled membrane channels
  2. Mixing performance in continuous oscillatory baffled reactors
  3. Predicting power consumption in continuous oscillatory baffled reactors
  4. Application of hybrid RANS-LES models to the prediction of flow behaviour in an industrial crystalliser
  5. An automated segmentation framework for nasal computational fluid dynamics analysis in computed tomography
  6. CFD Investigation of Flame and Pressure Wave Propagation through Variable Concentration Methane-Air Mixtures in a Tube Closed at One End
  7. Numerical study of heat transfer in square millimetric zigzag channels in the laminar flow regime
  8. The effects of variation in the arterial pulse waveform on perivascular flow
  9. Effect of Tube Size on Flame and Pressure Wave Propagation in a Tube Closed at One End: A Numerical Study
  10. Current Challenges and Emergent Technologies for Manufacturing Artificial Right Ventricle to Pulmonary Artery (RV-PA) Cardiac Conduits
  11. Polypeptide-affined interpenetrating hydrogels with tunable physical and mechanical properties
  12. Tough hydrophilic polyurethane-based hydrogels with mechanical properties similar to human soft tissues
  13. Investigation of turbulence model selection on the predicted flow behaviour in an industrial crystalliser — RANS and URANS approaches
  14. CFD study of the effect of unsteady slip velocity waveform on shear stress in membrane systems
  15. Tough and Processable Hydrogels Based on Lignin and Hydrophilic Polyurethane
  16. Investigation of the flow patterns produced from sudden expansion geometries using pressure difference measurements and flow visualisation techniques
  17. Assessment of the impact of bubble size modelling in CFD simulations of alternative bubble column configurations operating in the heterogeneous regime
  18. Oxygen transfer in pilot-scale contactors: An experimental and computational investigation into the effect of contactor design
  19. A CFD study on the effect of membrane permeance on permeate flux enhancement generated by unsteady slip velocity
  20. Hydrodynamics in a stirred tank in the transitional flow regime
  21. Potential application of double skin façade incorporating aerodynamic modifications for wind energy harvesting
  22. Chiari malformation may increase perivascular cerebrospinal fluid flow into the spinal cord: A subject-specific computational modelling study
  23. Simulation of microchannel flows using a 3D height function formulation for surface tension modelling
  24. Hydrodynamics and mixing in airlift contactors: Experimental work and CFD modelling
  25. Towards the design of an intensified coagulator
  26. Experimental investigation into the drag volume fraction correction term for gas-liquid bubbly flows
  27. Preface to special issue of selected papers from the Eleventh International Conference on CFD in the Minerals and Process Industries (CFD2015)
  28. Predicting flow and residence time in alumina digestion vessels
  29. CFD simulation of Taylor flow: Should the liquid film be captured or not?
  30. Utilizing cavity flow within double skin façade for wind energy harvesting in buildings
  31. Proper Orthogonal Decomposition (POD) analysis of CFD data for flow in an axisymmetric sudden expansion
  32. Preface to the Special Issue – Selected contributions from the 11th International Conference on CFD in the Minerals and Process Industries (CFD2015) in Melbourne Australia
  33. CFD simulation of industrial bubble columns: Numerical challenges and model validation successes
  34. Development of a slurry abrasion model using an Eulerian–Eulerian ‘two-fluid’ approach
  35. Preface to special issue of selected papers from the Eleventh International Conference on CFD in the Minerals and Process Industries (CFD2015)
  36. Heat transfer and pressure drop characteristics of gas–liquid Taylor flow in mini ducts of square and rectangular cross-sections
  37. Sustained high-pressure in the spinal subarachnoid space while arterial expansion is low may be linked to syrinx development
  38. Hydrodynamics and mixing in continuous oscillatory flow reactors—Part I: Effect of baffle geometry
  39. Numerical simulation of annular flow hydrodynamics in microchannels
  40. High-Speed Laser Image Analysis of Plume Angles for Pressurised Metered Dose Inhalers: The Effect of Nozzle Geometry
  41. Hydrodynamics and mixing in continuous oscillatory flow reactors—Part II: Characterisation methods
  42. Characterizing bubble column bioreactor performance using computational fluid dynamics
  43. Numerical simulation of annular flow boiling in microchannels
  44. Experimental investigation into the impact of sparger design on bubble columns at high superficial velocities
  45. Corrigendum to “Wind engineering analysis of parabolic trough solar collectors: The effects of varying the trough depth” [2014, J. Wind Eng. Ind. Aerodyn. 135, 118–128]
  46. Wind effects in solar fields with various collector designs
  47. Taylor flow heat transfer in microchannels—Unification of liquid–liquid and gas–liquid results
  48. Towards Autonomous MAV Soaring in Cities: CFD Simulation, EFD Measurement and Flight Trials
  49. Experimental study of transient behaviour of laminar flow in zigzag semi-circular microchannels
  50. Oxygen transfer in bubble columns at industrially relevant superficial velocities: Experimental work and CFD modelling
  51. An Investigation into the Powder Release Behavior from Capsule-Based Dry Powder Inhalers
  52. Thoracic aortic aneurysm: 4D flow MRI and computational fluid dynamics model
  53. Implementation of a height function method to alleviate spurious currents in CFD modelling of annular flow in microchannels
  54. Influence of Tortuous Geometry on the Hydrodynamic Characteristics of Laminar Flow in Microchannels
  55. Scale-resolving simulation to predict the updraught regions over buildings for MAV orographic lift soaring
  56. Towards a CFD model of bubble columns containing significant surfactant levels
  57. Wind Engineering Analysis of Parabolic Trough Collectors to Optimise Wind Loads and Heat Loss
  58. Impact of tortuous geometry on laminar flow heat transfer in microchannels
  59. Impact of Surfactant Addition on Oxygen Mass Transfer in a Bubble Column
  60. The Effect of Active Pharmaceutical Ingredients on Aerosol Electrostatic Charges from Pressurized Metered Dose Inhalers
  61. Mixing in bubble column reactors: Experimental study and CFD modeling
  62. Heat exchanger specification: Coupling design and surface performance evaluation
  63. Impact of Surfactant Addition on Oxygen Mass Transfer in a Bubble Column
  64. Wind engineering analysis of parabolic trough solar collectors: The effects of varying the trough depth
  65. Corrigendum to “Effects of fluid structure interaction in a three dimensional model of the spinal subarachnoid space” [J. Biomech. 47 (11) (2014) 2826–2830]
  66. The Effect of Actuator Nozzle Designs on the Electrostatic Charge Generated in Pressurised Metered Dose Inhaler Aerosols
  67. Validation of a Computationally Efficient Computational Fluid Dynamics (CFD) Model for Industrial Bubble Column Bioreactors
  68. Dynamic flow modelling in precipitator vessels – A study of turbulence modelling approaches
  69. Preface to special issue of selected papers from CFD in the minerals and process industries
  70. Effects of fluid structure interaction in a three dimensional model of the spinal subarachnoid space
  71. A Review of Computational Modelling of Flow Boiling in Microchannels
  72. Transient laminar heat transfer simulations in periodic zigzag channels
  73. Experimental Investigation of Taylor and Intermittent Slug-annular/Annular Flow in Microchannels
  74. Impact of Surfactant Chemistry on Bubble Column Systems
  75. Development of a CFD Model of Bubble Column Bioreactors: Part Two - Comparison of Experimental Data and CFD Predictions
  76. The Influence of Actuator Materials and Nozzle Designs on Electrostatic Charge of Pressurised Metered Dose Inhaler (pMDI) Formulations
  77. Development of a CFD Model of Bubble Column Bioreactors: Part One - A Detailed Experimental Study
  78. Computational Fluid Dynamic Analysis of Intracranial Aneurysmal Bleb Formation
  79. Computational fluid dynamics modelling of cerebrospinal fluid pressure in Chiari malformation and syringomyelia
  80. Laminar heat transfer simulations for periodic zigzag semicircular channels: Chaotic advection and geometric effects
  81. Modeling of Microfluidic Devices
  82. Hydrodynamics of liquid–liquid Taylor flow in microchannels
  83. Three Dimensional Effects in Taylor Flow in Circular Microchannels
  84. On the importance of upstream compressibility in microchannel boiling heat transfer
  85. Chaotic advection in steady laminar heat transfer simulations: Periodic zigzag channels with square cross-sections
  86. Formation of tip-vortices on triangular prismatic-shaped cliffs. Part 2: A computational fluid dynamics study
  87. The shear rheology of bread dough: Analysis of local flow behaviour using CFD
  88. The presence of arachnoiditis affects the characteristics of CSF flow in the spinal subarachnoid space: A modelling study
  89. A numerical treatment of crystallization in tube flow
  90. The use of computational approaches in inhaler development
  91. Gravitational effect on Taylor flow in horizontal microchannels
  92. Validation of a CFD model of Taylor flow hydrodynamics and heat transfer
  93. An assessment of different turbulence models for predicting flow in a baffled tank stirred with a Rushton turbine
  94. CFD approaches for the simulation of hydrodynamics and heat transfer in Taylor flow
  95. Particle Aerosolisation and Break‐up in Dry Powder Inhalers: Evaluation and Modelling of the Influence of Grid Structures for Agglomerated Systems
  96. Effect of Flow Characteristics on Taylor Flow Heat Transfer
  97. Particle Aerosolisation and Break-Up in Dry Powder Inhalers: Evaluation and Modelling of Impaction Effects for Agglomerated Systems
  98. Preface to special issue of selected papers from CFD in the minerals and process industries
  99. Heat transfer in well-characterised Taylor flow
  100. Numerical simulation of idealised three-dimensional downburst wind fields
  101. Film and slug behaviour in intermittent slug–annular microchannel flows
  102. Preface to Special Issue: Part I of Selected Papers from CFD in the Minerals and Process Industries
  103. Particle Aerosolisation and Break-up in Dry Powder Inhalers 1: Evaluation and Modelling of Venturi Effects for Agglomerated Systems
  104. The influence of the relative timing of arterial and subarachnoid space pulse waves on spinal perivascular cerebrospinal fluid flow as a possible factor in syrinx development
  105. CFD modelling of flow and heat transfer in the Taylor flow regime
  106. Taylor Flow in Microchannels: A Review of Experimental and Computational Work
  107. A computational fluid dynamics model for co-deposition of silica and germania in the MCVD process
  108. Computational Fluid Dynamics modelling of ultra-lean porous burners
  109. Numerical investigation of the influence of topography on simulated downburst wind fields
  110. Design and Evaluation of a Porous Burner for the Mitigation of Anthropogenic Methane Emissions
  111. Numerical simulation of downburst winds
  112. Scale-adaptive simulation (SAS) modelling of a pilot-scale spray dryer
  113. On the CFD modelling of Taylor flow in microchannels
  114. Influence of tilt and surface roughness on the outflow wind field of an impinging jet
  115. Impact of chlorine dissociation for modified chemical vapor deposition
  116. Numerical simulation of solid suspension via mechanical agitation: effect of the modelling approach, turbulence model and hindered settling drag law
  117. Simulation of particle transport and deposition in the modified chemical vapor deposition process
  118. A novel method to include the free surface in a CFD model of jet injection into partially-baffled mixing vessels
  119. ASSESSMENT OF THE SST AND OMEGA-BASED REYNOLDS STRESS MODELS FOR THE PREDICTION OF FLOW AND HEAT TRANSFER IN A SQUARE-SECTION U-BEND
  120. Assessment of an Eulerian CFD model for prediction of dilute droplet dispersion in a turbulent jet
  121. Jet injection studies for partially baffled mixing reactors: A general correlation for the jet trajectory and jet penetration depth
  122. Simple and cost-effective powder disperser for aerosol particle size measurement
  123. Impact of thixotropy on flow patterns induced in a stirred tank: Numerical and experimental studies
  124. Thermohydraulic performance of a periodic trapezoidal channel with a triangular cross-section
  125. Numerical simulation of colloid dead-end filtration: Effect of membrane characteristics and operating conditions on matter accumulation
  126. Using CFD to identify means of reducing power consumption for mixing and suspension in paper pulp stock chests
  127. An experimental and CFD study of liquid jet injection into a partially baffled mixing vessel: A contribution to process safety by improving the quenching of runaway reactions
  128. CFD modelling of reverse osmosis membrane flow and validation with experimental results
  129. Simulation of particle–vortex interactions in the modified chemical vapor deposition process
  130. Single and multiphase CFD approaches for modelling partially baffled stirred vessels: Comparison of experimental data with numerical predictions
  131. Impinging jet simulation of stationary downburst flow over topography
  132. Laminar flow and heat transfer in a periodic trapezoidal channel with semi-circular cross-section
  133. Laminar Flow Transitions in a 2D Channel with Circular Spacers
  134. A general implementation of the H1 boundary condition in CFD simulations of heat transfer in swept passages
  135. Influence of Mouthpiece Geometry on the Aerosol Delivery Performance of a Dry Powder Inhaler
  136. An experimental and computational study of the vortex shape in a partially baffled agitated vessel
  137. Low-Reynolds number heat transfer enhancement in sinusoidal channels
  138. Transient Hydrodynamics and Free Surface Capture of an Under-Baffled Stirred Tank During Stopping
  139. Lagrangian and Eulerian models for simulating turbulent dispersion and coalescence of droplets within a spray
  140. Validation of the Lagrangian Approach for Predicting Turbulent Dispersion and Evaporation of Droplets within a Spray
  141. What is important in the simulation of spray dryer performance and how do current CFD models perform?
  142. Unsteady Flows with Mass Transfer in Narrow Zigzag Spacer-Filled Channels:  A Numerical Study
  143. Laminar flow and heat transfer in a periodic serpentine channel with semi-circular cross-section
  144. Alternate Operating Methods for Improving the Performance of Continuous Stirred Tank Reactors
  145. Focal spinal arachnoiditis increases subarachnoid space pressure: A computational study
  146. Effect of design on the performance of a dry powder inhaler using computational fluid dynamics. Part 2: Air inlet size
  147. Fouling Control in a Submerged Flat Sheet Membrane System: Part II—Two‐Phase Flow Characterization and CFD Simulations
  148. Dynamic response of a high-pressure reverse osmosis membrane simulation to time dependent disturbances
  149. Numerical simulation of colloidal dispersion filtration: description of critical flux and comparison with experimental results
  150. Particle size classification in a fluidized bed containing parallel inclined plates
  151. A framework for modeling particle size effects in emulsion polymerization systems using computational fluid dynamics linked to a detailed population balance model
  152. Laminar Flow and Heat Transfer in Periodic Serpentine Mini-Channels
  153. Thermohydraulics of square-section microchannels following a serpentine path
  154. Exploration of Spinning Cone Column Capacity and Mass Transfer Performance Using CFD
  155. The influence of inclined plates on expansion behaviour of solid suspensions in a liquid fluidised bed — A computational fluid dynamics study
  156. Analysis of the Dynamic Response of a Reverse Osmosis Membrane to Time-Dependent Transmembrane Pressure Variation
  157. Influence of Air Flow on the Performance of a Dry Powder Inhaler Using Computational and Experimental Analyses
  158. CFD Analysis of Scale Effects in Spinning Cone Columns
  159. The influence of inclined plates on expansion behaviour of solid suspensions in a liquid fluidised bed—a computational fluid dynamics study
  160. The Role of Capsule on the Performance of a Dry Powder Inhaler Using Computational and Experimental Analyses
  161. CFD Prediction of Odour Dispersion and Plume Visibility for Alumina Refinery Calciner Stacks
  162. Analysis of shear-induced coagulation in an emulsion polymerisation reactor using computational fluid dynamics
  163. Design of micromixers using CFD modelling
  164. Laminar Flow and Heat Transfer in a Periodic Serpentine Channel
  165. DETERMINATION OF THE INFLUENCE OF UNCERTAIN MODEL PARAMETERS IN PRESSURIZED GASIFICATION OF BLACK LIQUOR USING A FACTORIAL DESIGN
  166. Computational Fluid Dynamics Simulations of Taylor Bubbles in Tubular Membranes
  167. A computational fluids dynamics study of buoyancy effects in reverse osmosis
  168. Effect of Design on the Performance of a Dry Powder Inhaler Using Computational Fluid Dynamics. Part 1: Grid Structure and Mouthpiece Length
  169. Spiral wound modules and spacers
  170. Influence of inclined plates on the expansion behaviour of particulate suspensions in a liquid fluidised bed
  171. Simulation of the Effects of Inlet Swirl on Gas Flow Patterns in a Pilot-Scale Spray Dryer
  172. Challenges of Simulating Droplet Coalescence within a Spray
  173. Mass Transfer Analysis of Spinning Cone Columns Using CFD
  174. Modeling turbulent flow in stirred tanks with CFD: the influence of the modeling approach, turbulence model and numerical scheme
  175. PIV measurements of flow in an aerated tank stirred by a down- and an up-pumping axial flow impeller
  176. Simulation of the agglomeration in a spray using Lagrangian particle tracking
  177. Hydrodynamic control of the interface between two liquids flowing through a horizontal or vertical microchannel
  178. Characterization of the Mixing Quality in Micromixers
  179. Local condensation heat transfer rates in fine passages
  180. Simulation of Unsteady Flow and Vortex Shedding for Narrow Spacer-Filled Channels
  181. Arterial Pulsation-driven Cerebrospinal Fluid Flow in the Perivascular Space: A Computational Model
  182. Subcooled flow boiling heat transfer in narrow passages
  183. Simulation of Gas Flow Instability in a Spray Dryer
  184. Effects of gravity on the steady state of a reaction in a liquid-state microreactor—deviations from Poiseuille flow
  185. Prospects for the Modelling and Design of Spray Dryers in the 21st Century
  186. Progress in Understanding the Physical Processes Inside Spinning Cone Columns
  187. Techniques for computational fluid dynamics modelling of flow in membrane channels
  188. A CFD study of unsteady flow in narrow spacer-filled channels for spiral-wound membrane modules
  189. A Computational Fluid Dynamics Study of a Tall-Form Spray Dryer
  190. Computational fluid dynamics modelling of flow and permeation for pressure-driven membrane processes
  191. Simulation of the Flow around Spacer Filaments between Channel Walls. 2. Mass-Transfer Enhancement
  192. CFD analysis of spinning cone columns: prediction of unsteady gas flow and pressure drop in a dry column
  193. Simulation of the Flow around Spacer Filaments between Narrow Channel Walls. 1. Hydrodynamics
  194. The effect of gravity on the rate of a simple neutralisation reaction in a small, open cylindrical vessel
  195. CFD simulation of precession in sudden pipe expansion flows with low inlet swirl
  196. Effect of Axial Agitator Configuration (Up-Pumping, Down-Pumping, Reverse Rotation) on Flow Patterns Generated in Stirred Vessels
  197. Turbulent Shear Stress Effects on Plant Cell Suspension Cultures
  198. An assessment of turbulence models applied to the simulation of a two-dimensional submerged jet
  199. A hydrodynamic and thermodynamic simulation of droplet impacts on hot surfaces, Part II: validation and applications
  200. A hydrodynamic and thermodynamic simulation of droplet impacts on hot surfaces, Part I: theoretical model
  201. Spray drying of food ingredients and applications of CFD in spray drying
  202. FTIR spectroscopy measurements and CFD simulations of the pollutants arising from unflued combustion in a room
  203. Physical and numerical modelling of thunderstorm downbursts
  204. Experimental Measurement and Numerical Simulation of the Effect of Swirl on Flow Stability in Spray Dryers
  205. Numerical Simulations of Gas Flow Patterns Within a Tall-Form Spray Dryer
  206. USE OF COMPUTATIONAL FLUID DYNAMICS TECHNIQUES TO ASSESS DESIGN ALTERNATIVES FOR THE PLENUM CHAMBER OF A SMALL SPRAY DRYER
  207. The effect of gravity on the rate of a simple liquid-state reaction in a small, unstirred cylindrical vessel
  208. The effect of gravity on the rates of simple liquid-state reactions in a small, unstirred cylindrical vessel. Part II
  209. A new volume of fluid advection algorithm: the defined donating region scheme
  210. A Simple Kinetic Theory Treatment of Volatile Liquid-Gas Interfaces
  211. Flow boiling heat transfer of Freon R11 and HCFC123 in narrow passages
  212. A New Volume of Fluid Advection Algorithm: The Stream Scheme
  213. An experimental study of gas–liquid flow in a narrow conduit
  214. Simulation of the ignition of lean methane mixtures using CFD modelling and a reduced chemistry mechanism
  215. Cobra probe measurements of mean velocities, Reynolds stresses and higher-order velocity correlations in pipe flow
  216. A CFD based combustion model of an entrained flow biomass gasifier
  217. Computer modelling of CSF flow in the subarachnoid space
  218. Particle-Fluid Dynamics in Narrow Slit Settler Driven by Asymmetric Feed
  219. Computational aspects of premixing modelling
  220. The effect of coolant viscosity on natural convection film boiling
  221. Process Intensification in Spray Dryers by Turbulence Enhancement
  222. Radiation absorption during premixing
  223. Solid fire extinguishment by a water spray
  224. Computer modelling of the cerebrospinal fluid flow dynamics of aqueduct stenosis
  225. Computational fluid dynamics modelling of an entrained flow biomass gasifier
  226. Effects of the structural properties of solid fuels on their re-ignition characteristics
  227. Flow and mixing fields of turbulent bluff-body jets and flames
  228. A new correlation for bench-scale piloted ignition data of wood
  229. MATHEMATICAL MODELLING OF A ROTARY SWIRL CYCLONE SCRUBBER
  230. Heat Transfer and Fluid Dynamic Aspects of Explosive Melt–Water Interactions
  231. Numerical studies of multiphase mixing with application to some small-scale experiments
  232. Computational fluid dynamics modelling of wood combustion
  233. Fluid Dynamics of the Cerebral Aqueduct
  234. Measurements of no in turbulent non-premixed flames stabilized on a bluff body
  235. Quantification of the probability of containment failure caused by an in-vessel steam explosion for the Sizewell B PWR
  236. Steam explosion triggering: a review of theoretical and experimental investigations
  237. Validation of the Chymes mixing model
  238. Recent progress in the understanding of steam explosions
  239. Vapour explosions: multiphase detonations or deflagrations?
  240. Numerical simulations of smoke movement from a pool fire in a ventilated tunnel
  241. Numerical simulation of a laminar jet flow: a comparison of three CFD models
  242. Calculations of the wind-induced pressure distribution on a model building
  243. A comparison of coarse mixing predictions obtained from the CHYMES and PM-ALPHA models
  244. An improved mathematical model of melt/water detonations—I. Model formulation and example results
  245. An improved mathematical model of melt/water detonations—II. A study of escalation
  246. A finite difference error arising from the use of a staggered grid
  247. Low Mach number instability of an explicit numerical scheme
  248. The CHYMES coarse mixing model
  249. A review of pressure-induced propagation models of the vapour explosion process
  250. The nonhyperbolicity of multiphase flow equations: A nonlinear nonproblem?
  251. A mathematical model of melt/water detonations
  252. Some calculations of shocks and detonations for gas mixtures
  253. Buoyancy-driven, transient, two-dimensional thermo-hydrodynamics of a melt-water-steam mixture
  254. The particle size distribution of solidified melt debris from molten fuel-coolant interaction experiments
  255. One-dimensional calculations of two-phase mixing flows
  256. Heat and mass transfer computations for laminar flow in an axisymmetric sudden expansion
  257. Comments on the numerical scheme of Richards and Crane