All Stories

  1. Mechanism and Parameters Controlling the Decomposition Kinetics of Na2SiF6Powder to SiF4

    Article • International Journal of Chemical Kinetics, April 2016, Wiley

    Dr. Martin I. Pech-Canul

  2. Microstructure and properties of bilayer-graded Al-matrix composites by one-step pressureless infiltration of B4C/rice-husk ash preforms

    Article • MRS Proceedings, January 2016, Cambridge University Press

    Dr. Martin I. Pech-Canul

  3. ZnO:Al Thin Films by Successive Chemical Solution Deposition for Transistors Applications

    Article • MRS Proceedings, January 2015, Cambridge University Press

    Dr. Martin I. Pech-Canul

  4. The role of silicon alloying addition on the pitting corrosion resistance of an Al-12wt.%Si alloy

    Article • Electrochimica Acta, September 2014, Elsevier

    Dr. Martin I. Pech-Canul

  5. The role of solvents on the physical properties of sprayed iron oxide films

    Article • Vacuum, July 2014, Elsevier

    Dr. Martin I. Pech-Canul

  6. Corrosion Characteristics of an Al-1.78%Si-13.29%Mg Alloy in Chloride Solutions

    Article • September 2012, Wiley

    Dr. Martin I. Pech-Canul

  7. Application of Scanning Electrochemical Microscopy to Determine Electrochemical Activity of Intermetallics for an Al-Si-Mg Alloy in Chloride Solution

    Article • January 2011, The Electrochemical Society

    Dr. Martin I. Pech-Canul

  8. Effect of SiCp multimodal distribution on pitting behavior of Al/SiCp composites prepared by reactive infiltration

    Article • Powder Technology, November 2009, Elsevier

    Dr. Martin I. Pech-Canul

  9. Thermochemical Method for Coating AISI 316L Stainless Steel with Ti

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Dr. Martin I. Pech-Canul

  10. Alumina Extraction from Mexican Fly Ash

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Dr. Martin I. Pech-Canul

  11. Glass-Ceramics of the Wollastonite - Tricalcium Phosphate-Silica System

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Dr. Martin I. Pech-Canul

  12. Microstructural Characterization of 316L-Type Stainless Steel Exposed to SiFX Species in Argon Atmosphere

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Dr. Martin I. Pech-Canul

  13. Titanium Coatings on AISI 316L Stainless Steel Formed by Thermal Decomposition of TiH2 in Vacuum

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Dr. Martin I. Pech-Canul

  14. Degradation of Al/SiCp composites produced with rice-hull ash and aluminum cans

    Article • Waste Management, January 2008, Elsevier

    Dr. Martin I. Pech-Canul

  15. Microstructure and Mechanical Properties of Al/Sicp Composites with Multimodal Size Distribution of Reinforcements

    Article • November 2007, CrossRef Test Account

    Dr. Martin I. Pech-Canul

  16. Degradation of Al/SiCp Composites Processed with Fly Ash via Reactive Infiltration

    Article • November 2007, CrossRef Test Account

    Dr. Martin I. Pech-Canul

  17. Corrosion characteristics of hybrid Al/SiCp/MgAl2O4 composites fabricated with fly ash and recycled aluminum

    Article • Materials Characterization, October 2007, Elsevier

    Dr. Martin I. Pech-Canul

  18. Effect of bi- and trimodal size distribution on the superficial hardness of Al/SiCp composites prepared by pressureless infiltration

    Article • Powder Technology, July 2007, Elsevier

    Dr. Martin I. Pech-Canul

  19. Microstructure and Mechanical Properties of Al/Sicp Composites with Multimodal Size Distribution of Reinforcements

    Article • Materials Science Forum, January 2007, Trans Tech Publications

    Dr. Martin I. Pech-Canul

  20. Degradation of Al/SiCp Composites Processed with Fly Ash via Reactive Infiltration

    Article • Materials Science Forum, January 2007, Trans Tech Publications

    Dr. Martin I. Pech-Canul

  21. Effect of Mg Alloying Addition on Dissolution Behavior of Oxide Films in Al-Si-Mg Alloys

    Article • January 2007, The Electrochemical Society

    Dr. Martin I. Pech-Canul