All Stories

  1. Investigation of low- and high cycle fatigue in Al 2024-T4 alloy
  2. Investigation of the energy effectiveness of multistage differential gears when the speed is changed by the carrier
  3. Examination of Honeycomb Core Compliance in Sandwich Structure
  4. Comparative Study on Fatigue Life of CFRP Composites with Damages
  5. Evaluation of the Strength of Bolted Joints of Composite Plates
  6. Monitoring wear of gear wheel of helicopter transmission using the FAM-C and FDM-A methods
  7. Investigation of crack propagation in 17G1S steel of gas main pipelines after 40 years of operation.
  8. In situ Barely Visible Impact Damage detection and localization for composite structures using surface mounted and embedded PZT transducers: A comparative study
  9. Health Monitoring of the Aircraft Structure during a Full Scale Fatigue Test with Use of an Active Piezoelectric Sensor Network
  10. MATERIAŁY FUNKCJONALNE WYTWARZANE W SKALI PRZEMYSŁOWEJ
  11. Functional Materials Produced On An Industrial Scale
  12. Composite Aerospace Structure Monitoring with use of Integrated Sensors
  13. Tomographic examination of auxetic polyurethane foam structures (Phys. Status Solidi B 2/2014)
  14. An On-Line Multiway Approach to In-Situ NDI Looking at the PZL-130TCII
  15. Damage Size Estimation of the Aircraft Structure with Use of Embedded Sensor Network Generating Elastic Waves
  16. An Approach to Structural Health Monitoring of Composite Structures Based on Embedded PZT Transducers
  17. Transformation Of The S-N Curves For Al 2024 Alloy
  18. Tomographic examination of auxetic polyurethane foam structures
  19. Tests of polyurethane foams with negative Poisson's ratio
  20. Energy Correlated Damage Indices in Fatigue Crack Extent Quantification
  21. Good Practice for Fatigue Crack Growth Curves Description
  22. Introduction of Fatigue Markers in Full Scale Fatigue Test of an Aircraft Structure
  23. The Effect of Cure Cycle Time on the Properties of Epoxy-Bonded Joints
  24. ZL-130TCII Fracture Markers Solution for Full-Scale Fatigue Test
  25. Modification of the Least-Squares Method for Description of Fatigue Crack Propagation
  26. Investigations of Some Properties of Material Samples Taken from the Aircraft Withdrawn from Service
  27. Elastyczne Pianki Auksetyczne - Wytwarzanie, Właściwości I Potencjalne Zastosowania
  28. Flexible Auxetic Foams - Fabrication, Properties and Possible Application Areas
  29. Modyfikacja MNK do Opisu Krzywych Propagacji Pęknięć Zmęczeniowych
  30. Modyfikacja Równania do Opisu Krzywych Wöhlera
  31. Modification of the Equation for Description of Wöhler's Curves
  32. Strength Testing and Analysis of Fatigue Crack Growth in Selected Aircraft Materials
  33. Methodical Approach to the Analysis of Experimental Data Associated with the Fatigue Cracks Propagation Under Overload Conditions
  34. Metodologia Analizy Danych Doświadczalnych Propagacji Pęknięć Zmęczeniowych w Warunkach Obciążeń z Przeciążeniami
  35. Selected Problems of Measurement Uncertainty — Part 1
  36. Selected Problems of Measurement Uncertainty — Part 2
  37. Examination of the Structure and Micro-Hardness of a Laser-Constituted Surface Layer Deposited on the Constructional Steel
  38. Zarys Metody Szacowania Eksploatacyjnej Trwałości Zmęczeniowej Elementów Konstrukcji Lotniczych I Jej Weryfikacja Doświadczalna
  39. A Method to Estimate Operational Fatigue Life of Aeronautical Structural Components and Experimental Verification Thereof - An Outline
  40. Badania Struktury I Mikrotwardości Warstwy Konstutuowanej Laserowo NA Stali Konstrukcyjnej
  41. Szacowanie Niepewności Pomiaru
  42. Estimation of Measurement Uncertainty
  43. Zastosowanie Mikroskopii Sił Atomowych (AFM) W Diagnostyce Warstwy Wierzchniej
  44. Application of Atomic Force Microscopy (AFM) in the Diagnosing of a Surface Layer
  45. Some problems revealed in case studies of damage to combat aircraft