All Stories

  1. Enhancing low-speed WEDM machining capabilities on Nitronic-50 with a constant frequency ultrasonic hybrid method

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, October 2023, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  2. Mechanical and vibration behavior of surface‐modified titanium sheet interleaved with woven basalt/flax fiber metal laminates

    Article • Polymer Composites, September 2023, Wiley

    Dr RAJKUMAR Kaliyamoorthy

  3. Impact of recovered silicon particles incorporation on tribo-characteristics of poly ether ether ketone polymer composite

    Article • High Performance Polymers, July 2023, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  4. Mechanical and thermal characteristics of steam‐exploded silane grafted Kigelia Pinnata fruit (KPF) fiber reinforced vinyl ester polymer composites

    Article • Polymer Composites, June 2023, Wiley

    Dr RAJKUMAR Kaliyamoorthy

  5. Fiber laser cutting study on ternary NiTiV shape memory alloy

    Article • Materials and Manufacturing Processes, April 2023, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  6. Manufacturing and characterisation of magnesium composites reinforced by nanoparticles: a review

    Article • Materials Science and Technology, March 2023, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  7. Process Parameters for Optimization in Abrasive Water Jet Machining (AWJM) of Silicon-Filled Epoxy Glass Fibre Polymer Composites

    Article • Journal of Inorganic and Organometallic Polymers and Materials, March 2023, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  8. Friction and wear characteristics of synthetic diamond and graphene-filled polyether ether ketone composites

    Article • High Performance Polymers, October 2022, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  9. Aluminium–Steel Composite Foam in Joint Dynamic Performance of Redundant Articulated Robot Components

    Article • September 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  10. Biocompatibility Study Over WEDM Machined Surface of Stainless Steel Human Implant Material

    Article • September 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy, Dr Samuel Ratna Kumar P S

  11. Investigation on Interleaving Effect of CaCO3 Particulates in Sequential Layered Basalt Polymeric Laminates

    Article • September 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  12. Investigation on microstructure and tribological performance of zirconium boride reinforced AZ91D magnesium alloy: Effect of processing routes

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, September 2022, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  13. Fiber Laser Cutting of Cu–Zr Added Quaternary NiTi Shape Memory Alloy: Experimental Investigation and Optimization

    Article • Arabian Journal for Science and Engineering, September 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  14. Surface quality and morphology of NiTiCuZr shape memory alloy machined using thermal-energy processes: An examination of comparative topography

    Article • Surface Topography Metrology and Properties, August 2022, Institute of Physics Publishing

    Dr RAJKUMAR Kaliyamoorthy

  15. Cutting velocity influenced machinability of Monel 400 by coated tool

    Article • Materials and Manufacturing Processes, July 2022, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  16. Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, July 2022, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  17. Aluminium Silicate Concentration and Coordination effect with Tungsten sulphide improving Dry Sliding Wear Characteristics of AA7075 alloy Composites

    Article • Silicon, June 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  18. Influencing Behavior Study of Natural Almond Shell Filler on the Tensile, Thermal, and Free Vibrational Properties of Flax Fiber Intertwined Vinyl Ester Composites

    Article • Journal of Natural Fibers, June 2022, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  19. Investigation and optimization of AWJM on flax fiber stacked laminate by desirability approach

    Article • Materials Today Proceedings, April 2022, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  20. Sustainable solution to low-cost alternative abrasive from electric ceramic insulator waste for use in abrasive water jet machining

    Article • The International Journal of Advanced Manufacturing Technology, March 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  21. A spatial distribution effect of almond shell bio filler on physical, mechanical, thermal deflection and water absorption properties of vinyl ester polymer composite

    Article • Polymer Composites, March 2022, Wiley

    Dr RAJKUMAR Kaliyamoorthy

  22. Mechanical, thermogravimetric, and dynamic mechanical analysis of basalt and flax fibers intertwined vinyl ester polymer composites

    Article • Polymer Composites, February 2022, Wiley

    Dr RAJKUMAR Kaliyamoorthy

  23. Influence of silicon filler size and concentration on thermal stability and erosion wear resistance of polymer composite

    Article • Silicon, February 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  24. Enhancement of machining and surface quality of quaternary alloyed NiTiCuZr shape memory alloy through ultrasonic vibration coupled WEDM

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, November 2021, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  25. Parametric investigation on surface roughness and hole quality of Ti metal hybrid fibers cored laminate (MFL) during abrasive water jet drilling

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, October 2021, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  26. Investigations on the influence of particle reinforcement and wire materials on the surface quality and machining characteristics of AA6061-TiB2 alloy in WEDM

    Article • Surface Topography Metrology and Properties, August 2021, Institute of Physics Publishing

    Dr RAJKUMAR Kaliyamoorthy

  27. Effect of Recovered Silicon Filler Inclusion on Mechanical and Tribological Properties of Polytetrafluoroethylene (PTFE) Composite

    Article • Silicon, July 2021, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  28. Spark plasma processing of semi-conductive titanium carbide dispersed alumina composites

    Article • Materials and Manufacturing Processes, June 2021, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  29. Wire-EDM machinability investigation on quaternary Ni44Ti50Cu4Zr2 shape memory alloy

    Article • Materials and Manufacturing Processes, April 2021, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  30. A Novel Approach on Reusing Silicon Wafer Kerf Particle as Potential Filler Material in Polymer Composite

    Article • Silicon, January 2021, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  31. Abrasive water jet machining on Ti metal-interleaved basalt-flax fiber laminate

    Article • Materials and Manufacturing Processes, October 2020, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  32. Experimental investigations of electrochemical micromachining of nickel aluminum bronze alloy

    Article • Materials and Manufacturing Processes, September 2020, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  33. A Comparative Study on Abrasive Water Jet Machining Characteristics of Entry and Exit Layers of Glass and Basalt Woven Polymer Composites

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  34. Desirability Approach Machining Study on Aluminum Composite Through Wire-Cut Electric Discharge Technique

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  35. Dynamic Mechanical Analysis of Flax Fiber Stacked Polyurethane Blend Epoxy Composites

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  36. Electrolyte and Machining Parameters Optimization of Wire Electrochemical Cutting of Aluminum/Titanium Diboride Composite

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  37. Optimization of CO2 Laser Cutting Parameters for AA6061/B4C/hBN Hybrid Composites using Taguchi-based Response Surface Methodology

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  38. Optimization of Laser Trepanning Parameters for Mild Steel by Taguchi Response Surface Methodology (T-RSM)

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  39. Optimization of Process Parameter in Abrasive Water Jet Machining of Blue-Fired Grain-Reinforced Glass Fiber Polymer Composite

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  40. Tribological Properties of PEEK Reinforced with Synthetic Diamond Composite

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  41. Turning Process Characteristics of Aluminium Matrix Hybrid Composite Using Grey Relational Surface Methodology

    Article • August 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  42. Sustainable application of grinding wheel waste as abrasive for abrasive water jet machining process

    Article • Journal of Cleaner Production, July 2020, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  43. Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, May 2020, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  44. Prunus amygdalus particulate distributed inter layer‐kenaf composite

    Article • Polymer Composites, May 2020, Wiley

    Dr RAJKUMAR Kaliyamoorthy

  45. Experimental Characterization of Dimensional and Surface Alternation of Straight and Angular Cutting on Self-lubricating Composite: A Wire EDM Approach

    Article • Arabian Journal for Science and Engineering, May 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  46. Mechanical and free vibration properties of skin and core designed basalt woven intertwined with flax layered polymeric laminates

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, May 2020, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  47. Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites

    Article • Metals and Materials International, April 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  48. A comparative study of solid lubricant types on the microstructure and mechanical behaviour of AA7075-zirconium boride aerospace composites

    Article • IOP Conference Series Materials Science and Engineering, March 2020, Institute of Physics Publishing

    Dr RAJKUMAR Kaliyamoorthy

  49. Optimization of machining parameters in CNC turning of AA6061-B4C-CNT hybrid composites using Grey-fuzzy method

    Article • IOP Conference Series Materials Science and Engineering, March 2020, Institute of Physics Publishing

    Dr RAJKUMAR Kaliyamoorthy

  50. Microstructural Characteristics and Mechanical Behaviour of AA7075/TiB2 Composite

    Article • Materials Science Forum, March 2020, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  51. Analysis of Triangular WEDM Cut Corner Inaccuracy of Aluminium Composite Mold Material

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  52. Comparative Study of Cutting Insert Wear and Roughness Parameter (Ra) while turning Nimonic 90 and Hastelloy C-276 by Coated Carbide Inserts

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  53. Cryogenic turning of Hastelloy C-22

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  54. Key Experimental Investigations of cutting dimensionality by Abrasive Water Jet Machining on Basalt Fiber /Fly ash Reinforced Polymer Composite

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  55. Effect of Solid Lubricant in Dry Machining on Al-B4C Composite

    Article • January 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy, Nambiraj K M

  56. Evaluation of Surface Integrity of Multi-stacked Glass Interplyed with Flax Laminate by Abrasive Waterjet Machining

    Article • January 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy, Nambiraj K M

  57. Investigations on the Cutting Quality of Interleaved Flax Fiber with Fly Ash-Reinforced Hybrid Polymer Composite

    Article • January 2020, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy, Nambiraj K M

  58. Performance Evaluation of Abrasive Water Jet Machining on AA6061-B4C-HBN Hybrid Composites Using Taguchi Methodology

    Article • November 2019, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  59. Pulse and Work Revolution Parameters of Wire Electrical Discharge Turning on Ti-6Al-4V Alloy

    Article • November 2019, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  60. The Role of HBN Solid Lubricant Reducing Cutting Forces of Dry Machined Al-B4C Composite

    Article • November 2019, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy, Nambiraj K M

  61. Tribological Analysis by Concentration Effect of Boron Carbide and Graphite on the Aluminum Composites

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  62. Tailoring of tensile and dynamic thermomechanical properties of interleaved chemical-treated fine almond shell particulate flax fiber stacked vinyl ester polymeric composites

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, May 2019, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  63. Evaluation of thermal stability and damping behavior of electrical insulator waste reinforced thermoset polymer composite

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, January 2019, SAGE Publications

    Dr RAJKUMAR Kaliyamoorthy

  64. Analysis and characterization of friction behaviour on AA7075/ZrB2 composite under dry sliding condition

    Article • Materials Research Express, November 2018, Institute of Physics Publishing

    Dr RAJKUMAR Kaliyamoorthy

  65. Accelerated Testing Model Prediction of Fatigue Life of AA5083-H111—AA6061-T6 Friction Stir Weldment

    Article • September 2018, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy, Nambiraj K M

  66. Wire Electrical Discharge Machining Integrity Studies on the Aluminium Nanocomposite

    Article • September 2018, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  67. Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites

    Article • Materials and Manufacturing Processes, March 2018, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  68. Effect of Abrasive Waterjet Machining Parameters on Hybrid AA6061-B4C- CNT Composites

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  69. Experimental Investigation and Reliability Analysis on Wear Performance of AA6061-B4C-Nanographite Hybrid Composites

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  70. Experimental Investigations on Multiple Responses in Abrasive Waterjet Machining of Ti-6Al-4V Alloy

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  71. Experimental investigations on the Wire Electrochemical Micro Machining (WECM) integrity of AA6061-TiB2 composite

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  72. Machining characteristics evaluation of aluminium composites based on cBN and PCD inserts

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr RAJKUMAR Kaliyamoorthy, Nambiraj K M

  73. Preparation of Super Hydrophobic Loofah Sponge for Fast and Efficient Separation of Oil from Seawater

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  74. Electrolytic concentration effect on the abrasive assisted-electrochemical machining of an aluminum–boron carbide composite

    Article • Materials and Manufacturing Processes, October 2016, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  75. Preparation, Properties and Machinability Study of Luffa Fiber - Groundnut Shell Reinforced Epoxy Composite

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  76. Mechanical Properties of Almond Shell-Sugarcane Leaves Hybrid Epoxy Polymer Composite

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy, Dr Gnanavelbabu Annamalai

  77. A Comparative Study on the Brass-Steel Tribo-Pair under Dry and Lubricated Sliding Conditions

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  78. Mechanical Properties and Machinability Studies on the Human Hair-Coconut Coir-Glass Fibre Hybrid Composite

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy, Dr Gnanavelbabu Annamalai

  79. Electro Chemical Machining of Aluminum-Boron Carbide-Nanographite Composites

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  80. Mechanical, Electrical, and Tribological Properties of Copper–Graphite Composites

    Article • April 2016, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  81. Gnanavelbabu

    Article • Materials Science Forum, September 2015, Trans Tech Publications

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  82. Nano Graphite Powder Assisted Electric Discharge Machining Characteristics of ZM21 Magnesium Alloy

    Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  83. Abrasive Assisted Electrochemical Machining of Al-B4C Nanocomposite

    Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy, Poovazhagan Lakshmanan

  84. Effect of Magnesium Addition on Processing the Al-0.8 Mg-0.7 Si/SiCp Metal Matrix Composites

    Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy, Poovazhagan Lakshmanan

  85. Flaw Quantification in Colmonoy Overlays Using Immersion Ultrasonic Testing

    Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  86. Mechanical Properties of Chopped Randomly Oriented Epoxy - Luffa Fiber Reinforced Polymer Composite

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  87. Abrasive Assisted Electro Chemical Machining of Aluminum-Boron Carbide-Graphite Hybrid Composite

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  88. Evaluation of Mechanical Property of Friction Welded EN24 Steel Joints

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  89. Corrosion Behavior of Aluminium-Boron Carbide-Graphite Composites

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  90. Effect of Boron Carbide and Graphite on Machining Characteristics of Aluminium Boron Carbide Composite

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  91. Effect of Nano and Micro Graphite Particle on Tribological Performance of Aluminium Metal Matrix Composites

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  92. Effect of Sliding Speed on Tribological Properties of Microwave Sintered Copper-Graphite Composites

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  93. Mechanical Properties of Luffa Fiber and Ground nut Reinforced Epoxy Polymer Hybrid Composites

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  94. Effect of reinforcement particles on the abrasive assisted electrochemical machining of Aluminium-Boron carbide-Graphite composite

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  95. Effect of Microwave Heat Treatment on Mechanical Properties of AA6061 Sheet Metal

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  96. Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI 440C Bearing Steel

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  97. Effect of Electrical Discharge Machining Parameters on Microwave Heat Treated Aluminium-boron Carbide-graphite Composites

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Gnanavelbabu Annamalai, Dr RAJKUMAR Kaliyamoorthy

  98. Microwave Heat Treatment on Aluminium 6061 Alloy-Boron Carbide Composites

    Article • Procedia Engineering, January 2014, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  99. Influence of Graphite Reinforcement on Mechanical Properties of Aluminum-Boron Carbide Composites

    Article • Advanced Materials Research, December 2013, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  100. Comparison Studies on Microwave & Muffle Furnace Heat Treatment for Al-B4C Composite

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Dr RAJKUMAR Kaliyamoorthy

  101. Wear performance of Al–SiC–B4C hybrid composites under dry sliding conditions

    Article • Materials & Design (1980-2015), May 2013, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  102. Tribological behavior of microwave processed copper–nanographite composites

    Article • Tribology International, January 2013, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  103. Tribological Properties of Magnesium Nano-Alumina Composites under Nano-Graphite Lubrication

    Article • Tribology Transactions, May 2012, Taylor & Francis

    Dr RAJKUMAR Kaliyamoorthy

  104. Wear and Life Characteristics of Microwave-Sintered Copper-Graphite Composite

    Article • Journal of Materials Engineering and Performance, February 2012, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  105. Accelerated wear testing for evaluating the life characteristics of copper–graphite tribological composite

    Article • Materials & Design (1980-2015), May 2011, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  106. Tribological performance of microwave sintered copper–TiC–graphite hybrid composites

    Article • Tribology International, April 2011, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  107. Tribological studies on microwave sintered copper–carbon nanotube composites

    Article • Wear, April 2011, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  108. Fabrication of copper–TiC–graphite hybrid metal matrix composites through microwave processing

    Article • The International Journal of Advanced Manufacturing Technology, December 2009, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  109. Tribological Performance of Microwave-Heat-Treated Copper–Graphite Composites

    Article • Tribology Letters, August 2009, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy

  110. Microwave sintering of copper–graphite composites

    Article • Journal of Materials Processing Technology, August 2009, Elsevier

    Dr RAJKUMAR Kaliyamoorthy

  111. Tribological Characteristics of Copper-Nano Carbon Crystalline Composites

    Article • IGI Global

    Dr RAJKUMAR Kaliyamoorthy