All Stories

  1. Influence of the Length and the Content of Cellulose Fibers Obtained from Sugarcane Bagasse on the Mechanical Properties of Fiber-Reinforced Mortar Composites
  2. Strengthened surface crystallized 19.6Li2O·11.0ZrO2·69.4SiO2 and 20.0Li2O·6.7ZrO2·68.9SiO2·4.4Al2O3 glass-ceramics
  3. Aluminum anodizing waste and its uses: An overview of potential applications and market opportunities
  4. CHARACTERIZATION OF PULP AND PAPER MILL WASTE FOR THE PRODUCTION OF WASTE-BASED CEMENT
  5. Coefficients of static and dynamic friction of ceramic floor tiles: proposal of new method of surface roughness determination
  6. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
  7. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
  8. Obtenção de cerâmicas quimicamente ligadas a partir de resíduos industriais
  9. Thermal Behavior of Pyrite in the CO2 and N2 Atmosphere for Obtaining Pyrrhotite: A Magnetic Material
  10. Effect of the Addition of the Waste Generated from the Feldspar Mining on the Obtainment of Ceramic Brick
  11. Solid-state reaction in nanoparticulate alumina/LZSA glass-ceramic composites
  12. Thermal characterization of hydrated eco-friendly clinkers produced from pulp and paper mill waste
  13. Wastes from pulp and paper mills - a review of generation and recycling alternatives
  14. Evaluation of the Accelerated Degradation of Mortar in a Ceramic Coating Facade System
  15. Assessment of PCM-Impregnated Zeolite as a Matrix for Latent Heat Storage
  16. Structural Refinement by the Rietveld Method on Clinkers Obtained from Waste from Pulp and Paper Mills
  17. Use of Nickel Slag as Raw Material for Roof Tiles Production
  18. Obtainment of Porous Ceramic Structures: A Comparison among Different Compositions and Methods of Conformation
  19. Combating pathogens with Cs2.5H0.5PW12O40 nanoparticles: a new proton-regulated antimicrobial agent
  20. Antifungal activities against toxigenic Fusarium specie and deoxynivalenol adsorption capacity of ion-exchanged zeolites
  21. Comparison of Methods for Determining the Water Absorption of Glazed Porcelain Stoneware Ceramic Tiles
  22. Effect of LZSA Glass-Ceramic Addition on Pressureless Sintered Alumina. Part II: Mechanical Behavior
  23. Microstructural development and electrical behavior during crystalization of iron-rich glass-ceramics obtained from mill scale
  24. Use of mechanically-activated kaolin to replace ball clay in engobe for a ceramic tile
  25. New ion-exchanged zeolite derivatives: antifungal and antimycotoxin properties against Aspergillus flavus and aflatoxin B1
  26. Effect of temperature and holding time on the densification of alumina obtained by two-step sintering
  27. Waste-containing clinkers: Valorization of alternative mineral sources from pulp and paper mills
  28. Effect of LZSA Glass-Ceramic Addition on Pressureless Sintered Alumina. Part I: Grain Growth
  29. Evaluation of the thermal performance of different cold materials for urban paving
  30. Estudo de composições cerâmicas à base de alumina e vitrocerâmico do sistema LZSA para obtenção de estruturas multicamadas por tape casting
  31. Kinetics of the oxidation reactions and decomposition of pyrite
  32. Antibacterial and photocatalytic activity of ZnO nanoparticles from Zn(OH)2 dehydrated by azeotropic distillation, freeze drying, and ethanol washing
  33. Ballistic performance of Al2O3 mosaic armors with gap-filling materials
  34. MELHORIA DE QUALIDADE E REDUÇÃO DE CUSTO DE PRODUÇÃO COM A REFORMULAÇAO DE MASSA DE PORCELANATO TÉCNICO
  35. Cristalização de superfície em vidro do sistema Li2O–ZrO2–SiO2–Al2O3
  36. Efeito de Aditivo Defloculante no Processamento de Massa para a Obtenção de Blocos Cerâmicos Estruturais
  37. Permeability of Porous Ceramic Membranes Obtained from Waste of the Coal Extraction Process
  38. Crystallization Kinetics of β-Spodumene/Cordierite-Based Glass-Ceramics
  39. Improving physical properties of cubic InO 1.5 -stabilized zirconia by alloying with MoO 3
  40. Thermal Characterization of Neodymium-Barium-Copper Ceramic (NBCo Ceramic) Synthesized from Barium Carbonate
  41. A review of two-step sintering for ceramics
  42. Synthesis and characterization of Li2TiSiO5 obtained by melting and solid-state reaction
  43. Crystallization kinetic and thermal and electrical properties of β-spodumeness/cordierite glass–ceramics
  44. Resistance of InO 1.5 -stabilized tetragonal zirconia polycrystals to low-temperature degradation
  45. Azeotropic distillation, ethanol washing, and freeze drying on coprecipitated gels for production of high surface area 3Y–TZP and 8YSZ powders: A comparative study
  46. Evaluation of electrical properties of glass-ceramics obtained from mill scale
  47. Mechanical tests and simulation on load sharing in alumina fiber bundles
  48. Effect of a LZSA glass-ceramic addition on the sintering behavior of alumina
  49. Barium carbonate as an agent to improve the electrical properties of neodymium-barium-copper system at high temperature
  50. The Influence of Dopants in the Grain Size of Alumina - A Review
  51. Multilayered Ceramic Composites – A Review
  52. Waste valorization
  53. Permeability of porous ceramic based on calcium carbonate as pore generating agent
  54. Wear performance of alumina-based ceramics - a review of the influence of microstructure on erosive wear
  55. The use of ceramic sludge and recycled glass to obtain engobes for manufacturing ceramic tiles
  56. Multilayered ceramic composites – a review
  57. Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand
  58. Coarse Aggregates Obtained from Red Mud via Pelletizing Process
  59. Technology for Coke Production in Tunnel Kiln from Compacted Coal Powder
  60. Crystallization Kinetics of Iron Rich Glass-Ceramic Obtained from Waste of Steel Industry
  61. Eficiência Energética: a Economia Gerada pelo Isolamento Térmico em uma Tubulação de Reaproveitamento de Ar Quente
  62. Porous Ceramic Structures Obtained from Calcium Carbonate as Pore Generating Agent
  63. Sintering and crystallization of plates prepared from coarse glass ceramic frits
  64. Structural and fluid dynamic characterization of calcium carbonate-based porous ceramics
  65. Influence of Fe2O3 content on the dielectric behavior of aluminous porcelain insulators
  66. The effect of microstructural features on the mechanical properties of LZSA glass-ceramic matrix composites
  67. Erratum to: “Sintering kinetics of a 18.8Li2O 8.3ZrO2 64.2SiO2 8.7Al2O3 glass ceramic” [Ceramics International 37 (2011) 1865–1871]
  68. Reaproveitamento de Calor na Indústria Cerâmica
  69. Estudo da Influência do Regime de Moagem na Distribuição Granulométrica da Barbotina
  70. Mechanical properties of recycled PET fibers in concrete
  71. Sinterabilidade de pós de precursor vitrocerâmico do sistema LZSA tratados por troca iônica
  72. Caracterização de Resíduo Sólido de ETE da Indústria Cerâmica de Revestimento
  73. Crystallisation Kinetics of aβ-Spodumene-Based Glass Ceramic
  74. Sintering kinetics of a 18.8Li2O8.3ZrO264.2SiO28.7Al2O3 glass ceramic
  75. Relationship between Surface Abrasion Wear and Brightness in Glazed Porcelainized Stoneware Tiles
  76. Sintering behavior of LZSA glass-ceramics
  77. Extruded ZrSiO4 particulate-reinforced LZSA glass–ceramics matrix composite
  78. Vitrocerâmicas porosas do sistema LZSA utilizando resíduos orgânicos como agentes formadores de poros
  79. Roll Pressed LZSA Glass-Ceramics
  80. Roll Pressed LZSA Glass-Ceramics