All Stories

  1. Evaluation of Al-5wt%Si-5wt%Zn as Raw Material for Semisolid Forming

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Dr Eugênio José Zoqui

  2. Analysis of the 355 Aluminium Alloy Microstructure for Application in Thixoforming

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Dr Eugênio José Zoqui

  3. Analysis of the thermodynamic behavior of A355 and B319 alloys using the differentiation method

    Article • Thermochimica Acta, January 2018, Elsevier

    Dr Eugênio José Zoqui

  4. Evaluation of the thixoformability of 318.1 aluminum alloy

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), November 2017, Carl Hanser Verlag

    Dr Eugênio José Zoqui

  5. Microstructural characterization of the A356 alloy in different processing routes used in the thixoforming process

    Article • Matéria (Rio de Janeiro), October 2017, FapUNIFESP (SciELO)

    Dr Eugênio José Zoqui

  6. Quality Management System for Micro and Small Enterprises

    Article • Sistemas & Gestão, September 2017, Laikos Servicos Ltda

    Dr Eugênio José Zoqui

  7. Study on the Microstructure and Liquid Phase Formation in a Semisolid Gray Cast Iron

    Article • Metallurgical and Materials Transactions B, June 2017, Springer Science + Business Media

    Dr Eugênio José Zoqui

  8. An alternative method to identify critical temperatures for semisolid materials process applications using differentiation

    Article • Thermochimica Acta, May 2017, Elsevier

    Dr Eugênio José Zoqui

  9. The effect of heating rate on the microstructural breakdown required for thixoformability

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), March 2017, Carl Hanser Verlag

    Dr Eugênio José Zoqui

  10. Comparison of Si Refinement Efficiency of Electromagnetic Stirring and Ultrasonic Treatment for a Hypereutectic Al-Si Alloy

    Article • Journal of Materials Engineering and Performance, March 2017, Springer Science + Business Media

    Dr Eugênio José Zoqui

  11. Viability study of production of enclosed impellers for centrifugal pumps by investment casting process

    Article • January 2017, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Dr Eugênio José Zoqui

  12. Comparison of Morphological Evolution of Al-7wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting/Electromagnetic Stirring and ECAP

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Dr Eugênio José Zoqui

  13. In Situ Observation of Semisolid Fe-2.5C-1.5Si Gray Cast Iron

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Dr Eugênio José Zoqui, Kazuhiro ITO

  14. Thermodynamic evaluation of the thixoformability of Al–Si alloys

    Article • Calphad, March 2016, Elsevier

    Dr Eugênio José Zoqui

  15. Thixoforming of an ECAPed Aluminum A356 Alloy: Microstructure Evolution, Rheological Behavior, and Mechanical Properties

    Article • Metallurgical and Materials Transactions A, January 2016, Springer Science + Business Media

    Dr Eugênio José Zoqui

  16. Electromagnetic Stirring versus ECAP: Morphological Comparison of Al-Si-Cu Alloys to Make the Microstructural Refinement for Use in SSM Processing

    Article • Advances in Materials Science and Engineering, January 2016, Hindawi Publishing Corporation

    Dr Eugênio José Zoqui

  17. Mechanical properties of thixoformed hypoeutectic gray cast iron

    Article • Journal of Materials Processing Technology, December 2015, Elsevier

    Dr Eugênio José Zoqui

  18. MICRO AND SMALL ENTERPRISES MANAGEMENT: MAIN ADMINISTRATIVE DIFFICULTIES OBSERVED IN CONSTRUCTION SECTOR ENTERPRISES

    Article • Brazilian Journal of Operations & Production Management, June 2015, Associacao Brasileira de Engenharia de Producao - ABEPRO

    Dr Eugênio José Zoqui

  19. Difficulties Experienced during Implementation of an Adapted Quality Management System in Incubated Companies

    Article • Business and Management Research, January 2015, Sciedu Press

    Dr Eugênio José Zoqui

  20. Obtaining Martensitic Structures during Thixoforming of Hypoeutectic Gray Cast Iron

    Article • Advances in Materials Science and Engineering, January 2015, Hindawi Publishing Corporation

    Dr Eugênio José Zoqui

  21. Raw material for semisolid processing

    Article • Advanced Materials Research, December 2014, Trans Tech Publications

    Dr Eugênio José Zoqui

  22. Morphological Evolution of Al-2wt%Si-2.5wt%Cu Alloy Produced by EMS and EMS Enhanced by ECAP

    Article • Solid State Phenomena, September 2014, Trans Tech Publications

    Dr Eugênio José Zoqui

  23. Rheological Behavior of Semisolid Hypoeutectic Cast Iron Alloyed to Chromium

    Article • Solid State Phenomena, September 2014, Trans Tech Publications

    Dr Eugênio José Zoqui

  24. Effect of Silicon on the Thixoformability of Al-Si-Cu Alloys

    Article • Journal of Materials Engineering and Performance, June 2014, Springer Science + Business Media

    Dr Eugênio José Zoqui

  25. Morphological Characterization of Al-2.0wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring for Thixoforming Process

    Article • Materials Science Forum, January 2014, Trans Tech Publications

    Dr Eugênio José Zoqui

  26. Alloys for Semisolid Processing

    Article • January 2014, Elsevier

    Dr Eugênio José Zoqui

  27. Thixoformability evaluation of AA2011 and AA2014 alloys

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), December 2013, Carl Hanser Verlag

    Dr Eugênio José Zoqui

  28. Influence of the processing route on the microstructure of aluminum alloy A356 for thixoforming

    Article • Materials Characterization, November 2013, Elsevier

    Dr Eugênio José Zoqui

  29. Microstructure of Thixoformable Hypoeutectic Cast Iron

    Article • Solid State Phenomena, October 2012, Trans Tech Publications

    Dr Eugênio José Zoqui

  30. Characterization of the Microstructure and Rheological Behavior of Al-4wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring

    Article • Solid State Phenomena, October 2012, Trans Tech Publications

    Dr Eugênio José Zoqui

  31. Thixoformability of hypoeutectic gray cast iron

    Article • Journal of Materials Processing Technology, June 2012, Elsevier

    Dr Eugênio José Zoqui

  32. Evaluation of the thixoformability of the A332 Alloy (Al–9.5 wt%Si–2.5 wt%Cu)

    Article • Journal of Materials Science, June 2011, Springer Science + Business Media

    Dr Eugênio José Zoqui

  33. EValuation of the thixoformability of AA7004 and AA7075 alloys

    Article • Materials Research, September 2010, FapUNIFESP (SciELO)

    Dr Eugênio José Zoqui

  34. Investigation on the Production of Thixotropic Semisolid Ti Alloys

    Article • Materials Science Forum, May 2010, Trans Tech Publications

    Dr Eugênio José Zoqui

  35. Thixoforming of Aluminium-Silicon Alloys in a Mechanical Eccentric Press

    Article • July 2008, CrossRef Test Account

    Dr Eugênio José Zoqui

  36. Thixo-formability of the AA6063 alloy: Conventional production processes versus electromagnetic stirring

    Article • Journal of Materials Processing Technology, March 2008, Elsevier

    Dr Eugênio José Zoqui

  37. Thixoforming of Aluminium-Silicon Alloys in a Mechanical Eccentric Press

    Article • Solid State Phenomena, January 2008, Trans Tech Publications

    Dr Eugênio José Zoqui

  38. CONFRONTO ENTRE AS PECULIARIDADES APRESENTADAS PELA

    Article • Revista Produção Online, October 2007, Associacao Brasileira de Engenharia de Producao - ABEPRO

    Dr Eugênio José Zoqui

  39. Rheological Behaviour and Microstructural Evolution of Semi-Solid A356 Alloy Produced by Different Routes

    Article • October 2006, CrossRef Test Account

    Dr Eugênio José Zoqui

  40. Rheological Behaviour and Microstructural Evolution of Semi-Solid A356 Alloy Produced by Different Routes

    Article • Solid State Phenomena, January 2006, Trans Tech Publications

    Dr Eugênio José Zoqui

  41. An investigation on semi-solid Al–7Si–0.3Mg alloy produced by mechanical stirring

    Article • Journal of Materials Processing Technology, December 2005, Elsevier

    Dr Eugênio José Zoqui

  42. Semi-solid behavior of new Al–Si–Mg alloys for thixoforming

    Article • Materials Science and Engineering A, October 2005, Elsevier

    Dr Eugênio José Zoqui

  43. Morphological analysis of SSM Al–4.5wt.% Cu measured by the rheocast quality index

    Article • Journal of Materials Processing Technology, December 2003, Elsevier

    Dr Eugênio José Zoqui

  44. Morphological evolution of SSM A356 during partial remelting

    Article • Materials Science and Engineering A, February 2002, Elsevier

    Dr Eugênio José Zoqui

  45. Macro- and microstructure analysis of SSM A356 produced by electromagnetic stirring

    Article • Journal of Materials Processing Technology, January 2002, Elsevier

    Dr Eugênio José Zoqui

  46. Contribution to the study of mechanisms involved in the formation of rheocast structure

    Article • Journal of Materials Processing Technology, February 2001, Elsevier

    Dr Eugênio José Zoqui

  47. Structural modifications in rheocast Al–Cu alloys by heat treatment and implications on mechanical properties

    Article • Journal of Materials Processing Technology, June 1998, Elsevier

    Dr Eugênio José Zoqui