All Stories

  1. Dynamics of a piezoelectric vibration energy harvester with a pseudoelastic SMA spring
  2. Modelling of coupled systems for energy harvesting from vibrating mechanical systems
  3. Numerical exploratory of a Magneto piezo elastic oscillator with Bouc-Wen damping to energy harvesting
  4. Energy harvesting efficiency of a quasi-zero stiffness system
  5. Energy harvesting capabilities dynamics of pendulum NES
  6. Enhancement of harvesting capability of coupled nonlinear energy harvesters through high energy orbits
  7. Periodic Trends in Two-Phase Flow Through a Vertical Minichannel: Wavelet and Multiscale Entropy Analyses Based on Digital Camera Data
  8. On Positioning and Vibration Control Application to Robotic Manipulators with a Nonideal Load Carrying
  9. Cyclic heat release variability in a spark ignition engine under exhaust gas recirculation
  10. Numerical analysis and experimental verification of broadband tristable energy harvesters
  11. Theoretical analysis of multi-stable energy harvesters with high-order stiffness terms
  12. Dynamics, Control, and Modeling of Fractional-Order Systems
  13. Dynamics identification of a piezoelectric vibrational energy harvester by image analysis with a high speed camera
  14. Using the Hall Effect for Monitoring the Starter Condition in Motor Vehicles
  15. Broadband frequency response of a nonlinear resonator with clearance for energy harvesting
  16. Monitoring of drilling conditions using the Hilbert-Huang transformation
  17. Strong temperature effect on the sizes of the Cooper pairs in a two-band superconductor
  18. Performance of broadband tristable energy harvesters
  19. Analysis of dynamics of a vertical cantilever in rotary coupling to the moving frame with movement limiters
  20. Bifurcation, chaotic and hysteresis phenomena of broadband tristable energy harvesters
  21. Braking deceleration variability of progressive safety gears using statistical and wavelet analyses
  22. Improving the bearing fault diagnosis efficiency by the adaptive stochastic resonance in a new nonlinear system
  23. Mean effective pressure oscillations in an IC-SI engine after the addition of hydrogen-rich gas
  24. Evolution of the charge density wave order on the two-dimensional hexagonal lattice
  25. Using 0–1 test to diagnose chaos on shape memory alloy dynamical systems
  26. Analysis of chaos in the combustion process of premixed natural gas engine
  27. Modeling method embedded into diagnostics, reliability and maintenance - models as knowledge representation systems
  28. On nonlinear dynamics of a parametrically excited pendulum using both active control and passive rotational (MR) damper
  29. Complex dynamics of a bistable electrically charged microcantilever: Transition from single well to cross well oscillations
  30. Cooper pairs in a two-orbital superconductor: bands filling effect on pair sizes
  31. Finite-time synchronization of fractional-order simplest two-component chaotic oscillators
  32. Study of dynamics of two-phase flow through a minichannel by means of recurrences
  33. Fractional model of magnetic field penetration into a toroidal soft ferromagnetic sample
  34. Gas Bubbles and Slugs Crossover in Air–Water Two-phase Flow by Multifractals
  35. Milling gate vibrations analysis via Hilbert-Huang transform
  36. Recurrence analysis of regular and chaotic motions of a superelastic shape memory oscillator
  37. Output response identification in a multistable system for piezoelectric energy harvesting
  38. Reduced-Order Modeling, Testing, and Control of Nonlinear Mechanical and Structural Systems
  39. The loss of synchronization between air pressure fluctuations and liquid flow inside the nozzle during the chaotic bubble departures
  40. Vertical beam modal response in a broadband energy harvester
  41. Investigation on nonlinear dynamic characteristics of combustion instability in the lean-burn premixed natural gas engine
  42. Stochastic P-bifurcation and stochastic resonance in a noisy bistable fractional-order system
  43. Investigation of two-phase flow patterns by analysis of Eulerian space–time correlations
  44. Responses of bistable piezoelectric-composite energy harvester by means of recurrences
  45. Recurrence Plot and Recurrence Quantification of the Dynamic Properties of Cross-Shaped Laminated Energy Harvester
  46. Dynamics and Noise Level Estimation in Two-Phase Flow through a Mini Channel
  47. Responses of Nonlinear Electro-Mechanical Energy Harvester by Means of Recurrences
  48. A composite beam with dual bistability for enhanced vibration energy harvesting
  49. Design and analysis of vibration energy harvesters based on peak response statistics
  50. Multiple solutions and corresponding power output of a nonlinear bistable piezoelectric energy harvester
  51. Dynamics of a two-phase flow through a minichannel: Transition from churn to slug flow
  52. Dynamics of a vibrational energy harvester with a bistable beam: voltage response identification by multiscale entropy and “0-1” test
  53. Analysis of Non-stationary Signals by Recurrence Dissimilarity
  54. On nonlinear dynamic of a non-ideal Duffing system with fractional damping
  55. Multiple Solutions and Corresponding Power Output of Nonlinear Piezoelectric Energy Harvester
  56. An overview of 0–1 test for chaos
  57. Nonlinear and multiscale dynamics of smart materials in energy harvesting
  58. Vibration energy harvesting by a Timoshenko beam model and piezoelectric transducer
  59. Nonlinear analysis of an electrodynamic broadband energy harvester
  60. Optimizing the Electrical Power in an Energy Harvesting System
  61. Regular and chaotic vibration in a piezoelectric energy harvester
  62. Nonlinear vibration of semitrailer suspension: wavelet and multiscale entropy-based approaches
  63. Dynamics of Two-Phase Flow through a Minichannel: Fourier and Multiscale Entropy Analyses
  64. Air Flow Conditions for Polymer Energy Harvesting
  65. Two phase flow bifurcation due to turbulence: transition from slugs to bubbles
  66. Dynamics of magnetic field penetration into soft ferromagnets
  67. Regular and chaotic vibration in a piezoelectric energy harvester with fractional damping
  68. Statistics of a noise-driven elastic inverted pendulum
  69. Experimental analysis of the dynamical response of energy harvesting devices based on bistable laminated plates
  70. Broadband Vibration Energy Harvesting from a Vertical Cantilever Piezocomposite Beam with Tip Mass
  71. Effects of Direct Fuel Injection Strategies on Cycle-by-Cycle Variability in a Gasoline Homogeneous Charge Compression Ignition Engine: Sample Entropy Analysis
  72. Nonlinear analysis of energy harvesting systems with fractional order physical properties
  73. Self-aggregation Phenomenon and Stable Flow Conditions in a Two-Phase Flow Through a Minichannel
  74. Identification and quantification analysis of nonlinear dynamics properties of combustion instability in a diesel engine
  75. Preface
  76. Energy harvesting by coupled oscillators forced by excitations with harmonic and random components
  77. Noise Effected Energy Harvesting in a Beam with Stopper
  78. Energy Harvesting in a Nonlinear Cantilever Piezoelastic Beam System Excited by Random Vertical Vibrations
  79. Complex response of a bistable laminated plate: Multiscale entropy analysis
  80. Vibration Analysis in Cutting Materials
  81. Energy Harvesting Enhancement by Vibrational Resonance
  82. The effect of noise on the response of a vertical cantilever beam energy harvester
  83. On simulation of a bistable system with fractional damping in the presence of stochastic coherence resonance
  84. Method of control of machining accuracy of low-rigidity elastic-deformable shafts
  85. Chaotic vibrations of the duffing system with fractional damping
  86. Dynamical Response of a Van der Pol–Duffing System with an External Harmonic Excitation and Fractional Derivative
  87. Enhance limit cycle oscillation in a wind flow energy harvester system with fractional order derivatives
  88. Dynamic Response of a Pendulum-Driven Energy Harvester in the Presence of Noise
  89. Regular and chaotic vibrations in the rub impact model of a Jeffcott rotor with a fractional restore force
  90. Dynamics of stainless steel turning: Analysis by flicker-noise spectroscopy
  91. PHASE CONTROL IN THE MASS-SPRING MODEL WITH NONSMOOTH STIFFNESS AND EXTERNAL EXCITATION
  92. Orbital effects on characteristic lengths in a two-orbital superconductor
  93. Dynamical Response of a Van der Pol System with an External Harmonic Excitation and Fractional Derivative
  94. Dynamics of Composite Milling: Application of Recurrence Plots to Huang Experimental Modes
  95. Basins of Attraction in a Simple Harvesting System with a Stopper
  96. ENERGY HARVESTING IN PIEZOELASTIC SYSTEMS DRIVEN BY RANDOM EXCITATIONS
  97. Non-Linear Piezoelectric Vibration Energy Harvesting From a Vertical Cantilever Beam With Tip Mass
  98. Analysis of chaotic non-isothermal solutions of thermomechanical shape memory oscillators
  99. Stationary response of nonlinear magneto-piezoelectric energy harvester systems under stochastic excitation
  100. Dynamics of composite nonlinear systems and materials for engineering applications and energy harvesting – The role of nonlinear dynamics and complexity in new developments
  101. Cutting force response in milling of Inconel: analysis by wavelet and Hilbert-Huang Transforms
  102. Band filling effects on coherence lengths and penetration depth in the two-orbital negative-U Hubbard model of superconductivity
  103. Intermittency and multiscale dynamics in milling of fiber reinforced composites
  104. Non-linear piezoelectric vibration energy harvesting from a vertical cantilever beam with tip mass
  105. Identification of turning and milling processes by stochastic langevin equations
  106. Nonlinear oscillations of an elastic inverted pendulum
  107. Transition to chaos and escape phenomenon in two-degrees-of-freedom oscillator with a kinematic excitation
  108. Identification of regular and chaotic isothermal trajectories of a shape memory oscillator using the 0–1 test
  109. Coherence Lengths for Superconductivity in the Two-Orbital Negative-U Hubbard Model
  110. Nonlinear dynamics of a regenerative cutting process
  111. Performance of a piezoelectric energy harvester driven by air flow
  112. Dynamics of a stainless steel turning process by statistical and recurrence analyses
  113. Torsional vibration of machines with gear errors
  114. Failure Diagnosis of a Gear Box by Recurrences
  115. NONLINEAR RESPONSE OF THE MASS-SPRING MODEL WITH NONSMOOTH STIFFNESS
  116. Energy harvesting by two magnetopiezoelastic oscillators with mistuning
  117. Melnikov’s criteria, parametric control of chaos, and stationary chaos occurrence in systems with asymmetric potential subjected to multiscale type excitation
  118. Torsional Vibration of Machines with Gear Errors
  119. Dynamics of a steel turning process
  120. Characteristics of cyclic heat release variability in the transition from spark ignition to HCCI in a gasoline engine
  121. Dynamical changes during composite milling: recurrence and multiscale entropy analysis
  122. Analysis of Dynamical Responses for the MDF Wooden Material
  123. Magnetopiezoelastic energy harvesting driven by random excitations
  124. Analysis of pressure fluctuations in a natural gas engine under lean burn conditions
  125. Analysis of heat release dynamics in an internal combustion engine using multifractals and wavelets
  126. Vibrations of a vehicle excited by real road profiles
  127. Transient chaotic behaviour versus periodic motion of a parametric pendulum by recurrence plots
  128. CONTINUOUS AND PULSIVE FEEDBACK CONTROL OF CHAOS
  129. Response of the mechanical system with the hysteresis in a high frequency limit
  130. Noisy and chaotic conditions of a pendulum motion
  131. Fractal analysis of thermally sprayed coatings
  132. Analysis of repeatability of Diesel engine acceleration
  133. Cracked rotor detection by recurrence plots
  134. Identification of chaos in a regenerative cutting process by the 0-1 test
  135. Diagnostics of a combustion process in the aircraft radial engine
  136. Detecting and identifying non-stationary courses in the ripping head power consumption by recurrence plots
  137. Intermittent behaviour of a cracked rotor in the resonance region
  138. Detection of the chaotic behaviour of a bouncing ball by the 0–1 test
  139. Vibrations of a delivery car excited by railway track crossing
  140. Intermittent and chaotic vibrations in a regenerative cutting process
  141. Crack identification by multifractal analysis of a dynamic rotor response
  142. Effect of high-frequency excitation in regenerative turning of metals and brittle materials
  143. Transition to chaos in the self-excited system with a cubic double well potential and parametric forcing
  144. Identification of chaos in a cutting process by the 0–1 test
  145. Chaotic response of a quarter car model forced by a road profile with a stochastic component
  146. Recurrence Plots for Diesel Engine Variability Tests
  147. Indicated Mean Effective Pressure Oscillations in a Natural Gas Combustion Engine
  148. Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor
  149. Charge Order versus Superconductivity in Inhomogeneous Systems
  150. Response of a magneto-rheological fluid damper subjected to periodic forcing in a high frequency limit
  151. Nonlinear vibration of a quarter-car model excited by the road surface profile
  152. Vertical Vibrations of a Vehicle Excited by Real Road Profiles.
  153. Wavelet analysis of cycle-to-cycle pressure variations in an internal combustion engine
  154. Multifractal and statistical analyses of heat release fluctuations in a spark ignition engine
  155. Phase locking and rotational motion of a parametric pendulum in noisy and chaotic conditions
  156. Chaotic vibration of a quarter-car model excited by the road surface profile
  157. Magnetic field induced rotation of the d -vector in the spin-triplet superconductor Sr 2 RuO 4
  158. Stochastic description of the deterministic Ricker’s population model
  159. Combustion process in a spark ignition engine: analysis of cyclic peak pressure and peak pressure angle oscillations
  160. Patterns in the combustion process in a spark ignition engine
  161. Analysis of cycle-to-cycle pressure oscillations in a diesel engine
  162. Vibration of generalized double well oscillators
  163. Magnetic field induced rotation of the d-vector in Sr2RuO4
  164. Properties of the π state induced by impurities in a d-wave superconductor
  165. Pulsive feedback control of a quarter car model forced by a road profile
  166. PULSATING FEEDBACK CONTROL FOR STABILIZING UNSTABLE PERIODIC ORBITS IN A NONLINEAR OSCILLATOR WITH A NONSYMMETRIC POTENTIAL
  167. Superconducting phases in strontium ruthenate
  168. Magnetic field orientation effect on specific heat in a p-wave superconductor
  169. Cycle-to-cycle oscillations of heat release in a spark ignition engine
  170. Cutting process dynamics by nonlinear time series and wavelet analysis
  171. Suppression of chaos by weak resonant excitations in a non-linear oscillator with a non-symmetric potential
  172. Vibration of the Duffing Oscillator: Effect of Fractional Damping
  173. Vibrations of a Pendulum with Oscillating Support and Extra Torque
  174. Nonlinear Response of an Oscillator with a Magneto-Rheological Damper Subjected to External Forcing
  175. Oscillators with asymmetric single and double well potentials: transition to chaos revisited
  176. Superconducting pairing amplitude and local density of states in presence of repulsive centers
  177. Spin-orbit coupling and symmetry of the order parameter in strontium ruthenate
  178. Nonlinear Response of an Oscillator with a Magneto-Rheological Damper Subjected to External Forcing
  179. Dynamics of a Gear System with Faults in Meshing Stiffness
  180. Variations of pairing potential and charge distribution in presence of a non-magnetic impurity
  181. A Numerical Study of a Simple Stochastic/ Deterministic Model of Cycle-to-Cycle Combustion Fluctuations in Spark Ignition Engines
  182. Estimation of a noise level using coarse-grained entropy of experimental time series of internal pressure in a combustion engine
  183. Estimation of a noise level using coarse-grained entropy of experimental time series of internal pressure in a combustion engine
  184. ‘π-state’ induced by impurities with a repulsive interaction
  185. Nonlinear Vibration in Gear Systems
  186. Combustion process in a spark ignition engine: Dynamics and noise level estimation
  187. Specific heat of disordered superconductors induced by negative centers
  188. NONPERIODIC OSCILLATIONS OF PRESSURE IN A SPARK IGNITION COMBUSTION ENGINE
  189. Specific heat of disordered superconductors induced by negative centers
  190. Nonlinear Analysis of Experimental Time Series of a Straight Turning Process
  191. Horizontal line nodes in superconducting Sr2RuO4
  192. Horizontal line nodes in superconducting Sr2RuO4
  193. Erratum to “Approximate analytical solutions for primary chatter in the non-linear metal cutting model”
  194. Gap nodes and time reversal symmetry breaking in strontium ruthenate
  195. Chaotic combustion in spark ignition engines
  196. Vibration in gear systems
  197. Charge and phase fluctuations in attractive Hubbard model
  198. Spin triplet superconductivity in Sr2RuO4
  199. APPROXIMATE ANALYTICAL SOLUTIONS FOR PRIMARY CHATTER IN THE NON-LINEAR METAL CUTTING MODEL
  200. Interlayer coupling and p -wave pairing in strontium ruthenate
  201. Spatial fluctuations of the pairing potential in disordered superconductors
  202. Chaotic vibrations in a regenerative cutting process
  203. SURFACE QUALITY OF A WORK MATERIAL'S INFLUENCE ON THE VIBRATIONS OF THE CUTTING PROCESS
  204. Van Hove Singularity and Superconductivity in a Disordered Hubbard Model
  205. SPATIAL FLUCTUATIONS OF THE ORDER PARAMETER IN A DISORDERED SUPERCONDUCTOR WITH p-WAVE PAIRING
  206. P-Wave Pairing in Superconducting Sr2RuO4
  207. Superconductivity in Disordered Sr2RuO4
  208. Superconducting alloys with weak and strong scattering: Anderson’s theorem and a superconductor-insulator transition
  209. Random negative-U Hubbard model
  210. Dynamic Phenomena in Gear Boxes
  211. Chaotic Vibrations in Regenerative Cutting Process
  212. Van Hove Singularity and Superconductivity in Disordered Sr 2 RuO 4
  213. Coherent potential approximation for d -wave superconductivity in disordered systems
  214. VIBRATION ANALYSIS OF A SELF-EXCITED SYSTEM WITH PARAMETRIC FORCING AND NONLINEAR STIFFNESS
  215. VIBRATION OF EXTERNALLY-FORCED FROUDE PENDULUM
  216. Van Hove singularity and d-wave pairing in disordered superconductors
  217. Charge and order parameter fluctuations in disordered superconductors
  218. Anderson Theorem and Spatial Fluctuations in the Gap of Disordered Superconductors
  219. A recursion method for solving the Bogoliubov equations for inhomogeneous superconductors
  220. Hole superconductivity in Hubbard subbands
  221. SUPERCONDUCTIVITY WITH ‘η PAIRING’: GAP PARAMETER AND SINGLE PARTICLE TUNNELING
  222. Tc calculation of disordered superconductor with local electron pairing
  223. Electron correlations in narrow band alloys: Hubbard subbands and cohesive energies